Publicatii SCOPUS 2015

[1]    U. Abel, V. Gupta, and M. Ivan, "A generalization of a combinatorial identity by Chang and Xu," Bulletin of Mathematical Sciences, vol. 5, no. 3, pp. 511-516, 2015.

[2]    U. Abel, M. Ivan, and R. Pəltənea, "The Durrmeyer variant of an operator defined by D.D. Stancu To the memory of Academician Dimitrie D. Stancu (1927-2014)," Applied Mathematics and Computation, vol. 259, pp. 116-123, 2015.

[3]    C. Aciu, D. L. Manea, C. Puia, and O. Cadar, "Mortars for the enhancement of the indoor environmental quality," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 4, pp. 45-54, 2015.

[4]    A. M. Acu, D. Bărbosu, and D. F. Sofonea, "Note on a q-analogue of stancu-kantorovich operators," Miskolc Mathematical Notes, vol. 16, no. 1, pp. 3-15, 2015.

[5]    M. R. Albrecht, C. Cocis, F. Laguillaumie, and A. Langlois, "Implementing candidate graded encoding schemes from ideal lattices C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 21st International Conference on the Theory and Application of Cryptology and Information Security, ASIACRYPT 2015, vol. 9453, pp. 752-775, 29 November 2015 through 3 December 2015 2015.

[6]    A. T. Alexandru, "Addendum modification of spur gears with equalized efficiency at the points where the meshing stars and ends," Mechanika, vol. 21, no. 6, pp. 480-485, 2015.

[7]    A. Andreica and C. Chira, "Best-order crossover for permutation-based evolutionary algorithms," Applied Intelligence, vol. 42, no. 4, pp. 751-776, 2015.

[8]    J. H. Andriamadio et al., "HPLC/MS analysis of polyphenols, antioxidant and antimicrobial activities of Artabotrys hildebrandtii O. Hffm. extracts," Natural Product Research, vol. 29, no. 23, pp. 2188-2196, 2015.

[9]    A. Arman, Ş. Ţălu, C. Luna, A. Ahmadpourian, M. Naseri, and M. Molamohammadi, "Micromorphology characterization of copper thin films by AFM and fractal analysis," Journal of Materials Science: Materials in Electronics, vol. 26, no. 12, pp. 9630-9639, 2015.

[10]    G. Armencea et al., "Micro-CT and histological analysis of Ti<inf>6</inf>Al<inf>7</inf>Nb custom made implants with hydroxyapatite and SiO<inf>2</inf>-TiO<inf>2</inf> coatings in a rabbit model," Clujul Medical, vol. 88, no. 3, 2015.

[11]    G. Armencea et al., "Titanium alloys with hydroxyapatite or SiO<inf>2</inf>+TiO<inf>2</inf> coatings used in bone reconstruction," Optoelectronics and Advanced Materials, Rapid Communications, vol. 9, no. 5-6, pp. 865-868, 2015.

[12]    R. Arsinte and E. Lupu, "On the acceptable perturbation level of CATV distribution amplifiers for mobile DVB-T reception C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[13]    I. H. Baciu, A. Taut, G. Chindris, and A. Fodor, "Mathematical model for a quasi-resonant converter C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 213-216, 22 October 2015 through 25 October 2015 2015.

[14]    V. Bacu, T. Stefanut, and D. Gorgan, "Adaptive processing of Earth Observation data on Cloud infrastructures based on workflow description C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 449-454, 3 September 2015 through 5 September 2015 2015.

[15]    G. Badea, R. A. Felseghi, I. Aşchilean, E. Moldovan, and C. Safirescu, "Comparative study regarding the electrolytically production of hydrogen using renewable energy sources for power supply of passive house C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 4, pp. 107-114, 18 June 2015 through 24 June 2015 2015.

[16]    G. Badea, R. A. Felseghi, S. M. Rəboacə, I. Aşchilean, D. Mureşan, and G. Naghiu, "Performance of fuel cell for energy supply of passive house C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[17]    G. Badea, G. S. Naghiu, R. A. Felseghi, S. Rəboacə, I. Aşchilean, and I. Giurca, "Multi-criteria analysis on how to select solar radiation hydrogen production system C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[18]    G. Badea, S. M. Răboacă, V. Demeusy, R. A. Felseghi, and I. Ştefănescu, "Simulation and design optimization of a photovoltaic fuel cell hybrid system C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 4, pp. 519-526, 18 June 2015 through 24 June 2015 2015.

[19]    E. Baiceanu, L. Vlase, A. Baiceanu, M. Nanes, D. Rusu, and G. Crisan, "New polyphenols identified in artemisiae abrotani herba extract," Molecules, vol. 20, no. 6, pp. 11063-11075, 2015.

[20]    E. N. Bakatula, C. J. Straker, E. M. Cukrowska, I. M. Weiersbye, L. Mihaly-Cozmuta, and H. Tutu, "A zeoponic system modified with Penicillium simplicissimum for the removal of trace elements from aqueous solutions and gold mine leachates," Journal of Geochemical Exploration, vol. 156, pp. 34-43, 2015.

[21]    D. Balanici, V. Tomsa, M. Borda, and R. Malutan, "Full duplex OTP cryptosystem based on DNA key for text transmissions C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Conference on Innovative Security Solutions for Information Technology and Communications, SECITC 2015, vol. 9522, pp. 39-48, 11 June 2015 through 12 June 2015 2015.

[22]    D. Balc, A. Beleiu, R. Potolea, and C. Lemnaru, "A learning-based approach for Romanian syllabification and stress assignment C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 37-42, 3 September 2015 through 5 September 2015 2015.

[23]    D. Banabic, "Advances in plastic anisotropy and forming limits in sheet metal forming C3 - ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015," ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, vol. 1, 8 June 2015 through 12 June 2015 2015.

[24]    D. Banabic and D. S. Comsa, "BBC2005 yield criterion used in the numerical simulation of sheet metal forming processes," 60 Excellent Inventions in Metal Forming, pp. 49-54, 2015.

[25]    D. Banabic, L. Lazarescu, and D. S. Comsa, "An innovative procedure for the experimental determination of the forming limit curves," 60 Excellent Inventions in Metal Forming, pp. 11-16, 2015.

[26]    D. Banabic, L. Lazarescu, and D. S. Comsa, "Predictive performances of FLC using Marciniak-Kuczynski model and Modified Maximum Force Criterion C3 - Key Engineering Materials," 18th International ESAFORM Conference on Material Forming, ESAFORM 2015, vol. 651-653, pp. 96-101, 15 April 2015 through 17 April 2015 2015.

[27]    A. Bara, S. Dale, C. Rusu, and H. Silaghi, "DC electrical drive control with fuzzy systems C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[28]    I. Barabás, "Liquid densities and excess molar volumes of ethanol + biodiesel binary system between the temperatures 273.15 K and 333.15 K," Journal of Molecular Liquids, vol. 204, pp. 95-99, 2015.

[29]    I. Barbantan and R. Potolea, "Towards Cross Language Morphologic Negation Identification in Electronic Health Records C3 - Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST," 6th International ICST Conference on Mobile Networks and Management, MONAMI 2014, vol. 141, pp. 417-430, 22 September 2014 through 24 September 2014 2015.

[30]    M. I. Barbu, I. Giosan, and T. Mariţla, "Height restriction barriers detection from traffic scenarios using stereo-vision C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 209-215, 3 September 2015 through 5 September 2015 2015.

[31]    L. Barna Iantovics, L. Szilágyi, and C. M. Pintea, "Societal intelligence - a new perspective for highly intelligent systems C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 22nd International Conference on Neural Information Processing, ICONIP 2015, vol. 9492, pp. 606-614, 9 November 2015 through 12 November 2015 2015.

[32]    C. Barz, T. Latinovic, I. B. A. Balan, A. Pop-Vadean, and P. P. Pop, "Using HMI Weintek in command of an industrial robot arm C3 - IOP Conference Series: Materials Science and Engineering," International Conference on Applied Sciences, ICAS 2014, vol. 85, no. 1, 2 October 2014 through 4 October 2014 2015.

[33]    A. L. C. Bazzan and C. Chira, "A hybrid evolutionary and multiagent reinforcement learning approach to accelerate the computation of traffic assignment C3 - Proceedings of the International Joint Conference on Autonomous Agents and Multiagent Systems, AAMAS," 14th International Conference on Autonomous Agents and Multiagent Systems, AAMAS 2015, vol. 3, pp. 1723-1724, 4 May 2015 through 8 May 2015 2015.

[34]    A. Bede, A. Pop, M. Moldovan, and I. Ardelean, "The influence of silanized nano-SiO2 on the hydration of cement paste: NMR investigations C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[35]    B. Belean, M. Borda, J. Ackermann, I. Koch, and O. Balacescu, "Unsupervised image segmentation for microarray spots with irregular contours and inner holes," BMC Bioinformatics, vol. 16, no. 1, 2015.

[36]    M. Belmeguenai, M. S. Gabor, T. Petrisor, Jr., F. Zighem, S. M. Chérif, and C. Tiusan, "Capping layer-tailored interface magnetic anisotropy in ultrathin Co2FeAl films," Journal of Applied Physics, vol. 117, no. 2, 2015.

[37]    M. Belmeguenai, M. S. Gabor, Y. Roussigne, F. Zighem, S. M. Cherif, and C. Tiusan, "Perpendicular Magnetic Anisotropy in Co2 FeAl Thin Films: Effect of Annealing Temperature," IEEE Transactions on Magnetics, vol. 51, no. 11, 2015.

[38]    M. Belmeguenai et al., "Perpendicular magnetic anistropy in Co<inf>2</inf>FeAl thin films: Effect of the annealing temperature C3 - 2015 IEEE International Magnetics Conference, INTERMAG 2015," 2015 IEEE International Magnetics Conference, INTERMAG 2015, 11 May 2015 through 15 May 2015 2015.

[39]    M. Belmeguenai et al., "Magnetic and structural properties of Co2FeAl thin films grown on Si substrate," Journal of Magnetism and Magnetic Materials, vol. 373, pp. 140-143, 2015.

[40]    J. V. Benlloch-Dualde, I. Grout, L. Grindei, and T. Ward, "Marketing EIE programmes in higher education towards students from underrepresented groups C3 - 2015 International Conference on Information Technology Based Higher Education and Training, ITHET 2015," International Conference on Information Technology Based Higher Education and Training, ITHET 2015, 11 June 2015 through 13 June 2015 2015.

[41]    K. I. Benta, M. Cremene, and M. F. Vaida, "A multimodal affective monitoring tool for mobile learning C3 - 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings," 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015, pp. 34-38, 24 September 2015 through 26 September 2015 2015.

[42]    K. I. Benţa and M. F. Vaida, "Towards real-life facial expression recognition systems," Advances in Electrical and Computer Engineering, vol. 15, no. 2, pp. 93-102, 2015.

[43]    S. Berezina, A. A. Il'icheva, L. I. Podzorova, and S. Ţălu, "Surface micromorphology of dental composites [CE-TZP]-[Al<inf>2</inf>O<inf>3</inf>] with Ca+2 modifier," Microscopy Research and Technique, vol. 78, no. 9, pp. 840-846, 2015.

[44]    I. Berinde, H. Bəlan, and T. S. Oros, "Control voltage and power fluctuations when connecting wind farms C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[45]    V. Berinde, A. R. Khan, and H. Fukhar-Ud-Din, "Fixed point iterative methods defined as admissible perturbations of generalized pseudocontractive operators," Journal of Nonlinear and Convex Analysis, vol. 16, no. 3, pp. 563-572, 2015.

[46]    V. Berinde and M. Păcurar, "A constructive approach to coupled fixed point theorems in metric spaces," Carpathian Journal of Mathematics, vol. 31, no. 3, pp. 277-287, 2015.

[47]    V. Berinde and M. Păcurar, "The contraction principle for nonself mappings on banach spaces endowed with a graph," Journal of Nonlinear and Convex Analysis, vol. 16, no. 9, pp. 1925-1936, 2015.

[48]    V. Berinde and M. A. Petric, "Fixed point theorems for cyclic non-self single-valued almost contractions," Carpathian Journal of Mathematics, vol. 31, no. 3, pp. 289-296, 2015.

[49]    M. Bertoncini, D. Arnone, T. Cioara, I. Anghel, I. Salomie, and T. H. Velivassaki, "Next generation data centers business models enabling multi-resource integration for smart city optimized energy efficiency C3 - e-Energy 2015 - Proceedings of the 2015 ACM 6th International Conference on Future Energy Systems," 6th ACM International Conference on Future Energy Systems, e-Energy 2015, pp. 247-252, 14 July 2015 through 17 July 2015 2015.

[50]    D. Beu and C. Ciugudeanu, "Sustainable lightning: The Romanian approach," Revista Transilvania, no. 10, pp. 67-71, 2015.

[51]    M. M. Birou, "A class of Markov type operators which preserve ej, j ≥ 1," Applied Mathematics and Computation, vol. 250, pp. 1-11, 2015.

[52]    O. Bîrte, L. Szabó, H. Van Der Auweraer, C. Faria, A. Popp, and C. Marţiş, "Study of torque ripple and noise for different rotor topologies of a synchronous reluctance machine C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 933-938, 7 May 2015 through 9 May 2015 2015.

[53]    S. Boboia, M. Moldovan, A. Burde, C. Saroşi, I. Ardelean, and C. Alb, "The effects of the curing regime and the composition on the absorption, solubility and the amount of residual monomers of dental flowable composites," Journal of Optoelectronics and Advanced Materials, vol. 17, no. 9-10, pp. 1487-1493, 2015.

[54]    S. Boboia, M. Moldovan, C. Prejmerean, C. Sarosi, A. Roman, and I. Ardelean, "Influence of initiation system and filler ratio on the properties of new flowable dental composites," Materiale Plastice, vol. 52, no. 1, pp. 104-108, 2015.

[55]    G. D. Boca, H. Erdoǧdu, and L. Mukaj, "Variables for leader model in a cross cultural ADKAR study C3 - Proceedings of the 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015," 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015, pp. 1871-1883, 11 November 2015 through 12 November 2015 2015.

[56]    G. D. Boca, S. Saraçli, and M. Vishkurti, "Modeling a cross educational model based on the development for sustainable competencies C3 - Proceedings of the 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015," 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015, pp. 1860-1870, 11 November 2015 through 12 November 2015 2015.

[57]    M. L. Boca and M. Secara, "Analogy between "mission critical" detection in distributed systems and 13C Isotope Separation Column C3 - Proceedings of SPIE - The International Society for Optical Engineering," 7th International Conference on Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, ATOM-N 2014, vol. 9258, 21 August 2014 through 24 August 2014 2015.

[58]    V. Bocaneţ, M. Bulgaru, and L. Fulea, "Components of FMEA database for the measurement process," Academic Journal of Manufacturing Engineering, vol. 13, no. 3, pp. 12-17, 2015.

[59]    E. Bodoki, L. Vlase, and R. Səndulescu, "Mechanistic study of colchicine's reduction behavior," Electrochemistry Communications, vol. 56, pp. 51-55, 2015.

[60]    H. Bogucka and V. Bota, "Welcome message from the technical program chairs a message from the TPC Co-Chairs C3 - 2015 IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015," 3rd IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015, 18 May 2015 through 21 May 2015 2015.

[61]    R. A. Boitor, I. S. Tódor, L. F. Leopold, and N. Leopold, "Room temperature synthesis of highly monodisperse and sers-active glucose-reduced gold nanoparticles," Journal of Applied Spectroscopy, vol. 82, no. 3, 2015.

[62]    L. Bolundut, E. Culea, G. Borodi, R. Stefan, C. Munteanu, and P. Pascuta, "Influence of Sm3+:Ag codoping on structural and spectroscopic properties of lead tellurite glass ceramics," Ceramics International, vol. 41, no. 2, pp. 2931-2939, 2015.

[63]    A. B. Bonţiu Pop and M. Lobonţiu, "The finite element analysis approach in metal cutting," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 12-17, 2015.

[64]    D. L. Borza, R. G. Danescu, and A. S. Darabant, "Eyeglasses contour extraction using genetic algorithms C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 327-333, 3 September 2015 through 5 September 2015 2015.

[65]    V. Bota, T. M. Pavel, and M. Varga, "On the reliability performance of distributed Alamouti-SFBC schemes C3 - 2015 IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015," 3rd IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015, pp. 166-170, 18 May 2015 through 21 May 2015 2015.

[66]    A. Botezan, R. Tirnovan, R. Munteanu, A. Graur, and D. Rafiroiu, "Hysteresis current control of the single-phase voltage source inverter using eMEGAsim real-time simulator," Advances in Electrical and Computer Engineering, vol. 15, no. 3, pp. 99-104, 2015.

[67]    R. Both, E. H. Dulf, and C. I. Muresan, "Active disturbance rejection controller for chemical reactor C3 - AIP Conference Proceedings," International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014, vol. 1648, 22 September 2014 through 28 September 2014 2015.

[68]    R. Both, E. H. Dulf, C. I. Muresan, and M. Secara, "Fractional order PD control of an isotope separation columns cascade C3 - SACI 2015 - 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2015, pp. 193-196, 21 May 2015 through 23 May 2015 2015.

[69]    S. Brad and E. Brad, "Enhancing SWOT analysis with TRIZ-based tools to integrate systematic innovation in early task design C3 - Procedia Engineering," World Conference: TRIZ FUTURE 2011-2014, vol. 131, pp. 616-625, 29 October 2014 through 31 October 2014 2015.

[70]    S. Brad, E. Brad, L. Crişan, and A. Crişan, "Framework for planning polycentric innovation in high-tech dynamic industries C3 - 23rd International Conference for Production Research, ICPR 2015," 23rd International Conference for Production Research, ICPR 2015, 2 August 2015 through 6 August 2015 2015.

[71]    S. Brad, B. Mocan, E. Brad, and M. Fulea, "Leading innovation to improve complex process performances by systematic problem analysis with TRIZ C3 - Procedia Engineering," World Conference: TRIZ FUTURE 2011-2014, vol. 131, pp. 1121-1129, 29 October 2014 through 31 October 2014 2015.

[72]    S. Brad and M. Murar, "Employing smart units and servitization towards reconfigurability of manufacturing processes C3 - Procedia CIRP," 7th CIRP Industrial Product-Service Systems Conference, IPSS 2015, vol. 30, pp. 498-503, 21 May 2015 through 22 May 2015 2015.

[73]    T. Brad, A. Fekete, M. S. Sandor, and C. Purcarea, "Natural attenuation potential of selected hydrokarst systems in the Carpathian Mountains (Romania)," Water Science and Technology: Water Supply, vol. 15, no. 1, pp. 196-206, 2015.

[74]    M. C. Bragagnolo, I. C. Moràrescu, L. Buşoniu, and P. Riedinger, "Decentralized formation control in fleets of nonholonomic robots with a clustered pattern," Studies in Systems, Decision and Control, vol. 42, pp. 313-333, 2015.

[75]    R. Brehar, C. Vancea, T. Mariţa, I. Giosan, and S. Nedevschi, "Pedestrian detection in the context of multiple-sensor data alignment for far-infrared and stereo vision sensors C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 385-392, 3 September 2015 through 5 September 2015 2015.

[76]    C. Briciu et al., "Phenotypic differences in nebivolol metabolism and bioavailability in healthy volunteers," Clujul Medical, vol. 88, no. 2, pp. 208-213, 2015.

[77]    J. Brzdęk, K. Ciepliński, A. Fošner, Z. Les̈niak, D. Popa, and B. Xu, "Approximate and iterative methods," Discrete Dynamics in Nature and Society, vol. 2015, 2015.

[78]    I. Bud, S. Duma, D. Gusat, I. I. Pasca, and A. Bud, "Controversial history of cyanide utilization in mining industry. Romanian specific issues C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 3, no. 1, pp. 149-154, 18 June 2015 through 24 June 2015 2015.

[79]    I. Bud, S. Duma, D. Gusat, I. I. Pasca, and A. Bud, "Technical solutions to rehabilitate the subsoil of central tailing pond in baia mare after its exploitation C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 3, no. 1, pp. 641-647, 18 June 2015 through 24 June 2015 2015.

[80]    I. Bud, D. Gusat, S. Duma, I. I. Pasca, and A. Bud, "Chemical stability studies regarding “Aurul” tailing pond – Current state and prognosis after rehabilitation C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 3, no. 1, pp. 135-140, 18 June 2015 through 24 June 2015 2015.

[81]    G. Buda, A. Samuila, M. Bilici, S. Atroune, and L. Dascalescu, "Set-Point Identification and Robustness Testing of a Triboelectrostatic Separation Process for Mixed Granular Plastics," IEEE Transactions on Industry Applications, vol. 51, no. 2, pp. 1153-1160, 2015.

[82]    L. Busoniu, M. C. Bragagnolo, J. Daafouz, and I. C. Morarescu, "Planning methods for the optimal control and performance certification of general nonlinear switched systems C3 - Proceedings of the IEEE Conference on Decision and Control," 54th IEEE Conference on Decision and Control, CDC 2015, vol. 54rd IEEE Conference on Decision and Control,CDC 2015, pp. 3604-3609, 15 December 2015 through 18 December 2015 2015.

[83]    L. Buşoniu and I. C. Morărescu, "Topology-preserving flocking of nonlinear agents using optimistic planning," Control Theory and Technology, vol. 13, no. 1, pp. 70-81, 2015.

[84]    A. Buzatu, G. Damian, H. G. Dill, N. Buzgar, and A. I. Apopei, "Mineralogy and geochemistry of sulfosalts from Baia Sprie ore deposit (Romania) - New bismuth minerals occurrence," Ore Geology Reviews, vol. 65, no. P1, pp. 132-147, 2015.

[85]    D. Bərbosu and C. V. Muraru, "Approximating B-continuous functions using GBS operators of Bernstein-Schurer-Stancu type based on q-integers," Applied Mathematics and Computation, vol. 259, pp. 80-87, 2015.

[86]    G. Cabǎu, A. T. Sǎlǎgean, and G. Sebestyen-Pal, "Realtime file processing based on Map-Reduce framework C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 537-543, 3 September 2015 through 5 September 2015 2015.

[87]    G. Călătan, A. Hegyi, C. Dico, and C. Mircea, "Surface waterproofing methods of clay bricks used in vernacular construction C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 287-294, 18 June 2015 through 24 June 2015 2015.

[88]    A. Campeanu, R. Munteanu, A. Graur, and G. Liuba, "Contributions regarding operation of induction machine supplied with two frequencies C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 182-187, 7 May 2015 through 9 May 2015 2015.

[89]    C. Campian, N. Chira, and M. Pop, "A holistic approach to a sustainable steel building C3 - Key Engineering Materials," International Conference on Innovative Research, ICIR 2015, vol. 660, pp. 202-207, 14 May 2015 through 16 May 2015 2015.

[90]    C. Campian, Z. Nagy, and M. Pop, "Behavior of fully encased steel-concrete composite columns subjected to monotonic and cyclic loading C3 - Procedia Engineering," 18th Conference on Plasma-Surface Interactions, PSI 2015, 5-6 February 2015, Moscow, Russian Federation and the 1st Conference on Plasma and Laser Research and Technologies, PLRT 2015, 18-20 February 2015, Moscow, Russian Federation, vol. 117, no. 1, pp. 444-456, 7 June 2013 2015.

[91]    A. Capaˇtaˇ, "Optimality conditions for strong vector equilibrium problems under a weak constraint qualification," Journal of Industrial and Management Optimization, vol. 11, no. 2, pp. 563-574, 2015.

[92]    A. Capətə, "Optimality conditions for vector equilibrium problems with set-valued mappings and cone constraints," Mathematica Slovaca, vol. 65, no. 3, pp. 683-696, 2015.

[93]    O. E. Cazan, M. C. Gherman, H. Constantinescu, and A. Hegyi, "Shrinkage behaviour of hybrid fiber reinforced high strength concrete C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 6, pp. 187-192, 18 June 2015 through 24 June 2015 2015.

[94]    O. E. Cazan, M. C. Gherman, H. Szilagyi, and H. Constantinescu, "Strength properties of polypropylene fiber reinforced high strength concrete C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 6, pp. 193-200, 18 June 2015 through 24 June 2015 2015.

[95]    N. Cennamo, R. Galatus, and L. Zeni, "Experimental results for characterization of a tapered plastic optical fiber sensor based on SPR C3 - Proceedings of SPIE - The International Society for Optical Engineering," Optical Sensors 2015, vol. 9506, 13 April 2015 through 16 April 2015 2015.

[96]    A. Cernat, M. Tertiş, R. Săndulescu, F. Bedioui, A. Cristea, and C. Cristea, "Electrochemical sensors based on carbon nanomaterials for acetaminophen detection: A review," Analytica Chimica Acta, vol. 886, pp. 16-28, 2015.

[97]    E. Ceuca and G. Corsiuc, "The Smart City - Integrated green energy system C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 390-395, 6 May 2015 through 10 May 2015 2015.

[98]    K. M. Chao et al., "Cloud E-learning for Mechatronics: CLEM," Future Generation Computer Systems, vol. 48, pp. 46-59, 2015.

[99]    F. Chauvicaurt, C. Faria, A. Dziechciarz, and C. Martis, "Infuence of rotor geometry on NVH behavior of synchronous reluctance machine C3 - 2015 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015," 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015, 31 March 2015 through 2 April 2015 2015.

[100]    R. I. Chelcea et al., "One-dimensional laplace spectroscopy used for the assessment of pore-size distribution on the ovariectomized rats femur," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 1, pp. 57-70, 2015.

[101]    R. L. Chereches, P. Di Barba, and S. Wiak, "Non-linear inverse problems and optimal design of MEMS," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 34, no. 3, pp. 608-623, 2015.

[102]    I. Chicinaş, T. F. Marinca, F. Popa, and B. V. Neamţu, "Rhometal interface in pseudo-core shell powders like Permalloy/Rhometal type," Applied Surface Science, vol. 358, pp. 627-633, 2015.

[103]    R. Chifor et al., "Computer-assisted identification of the gingival sulcus and periodontal epithelial junction on high-frequency ultrasound images," Medical Ultrasonography, vol. 17, no. 3, pp. 273-279, 2015.

[104]    E. S. Chifu, T. S. Letia, and V. R. Chifu, "Unsupervised aspect level sentiment analysis using Ant Clustering and Self-organizing Maps C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[105]    V. R. Chifu, C. B. Pop, I. Salomie, E. S. Chifu, V. Rad, and M. Antal, "Hybrid cuckoo search-based algorithms for business process mining," Advances in Intelligent Systems and Computing, vol. 322, pp. 487-498, 2015.

[106]    D. Chinces and I. Salomie, "Optimizing spaghetti process models C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 506-511, 27 May 2015 through 29 May 2015 2015.

[107]    C. G. Chiorean, I. V. Marchis, and M. S. Bum, "A computer method for design and M-N-Φ analysis of prestressed RC cross-sections," Journal of Structural Engineering (India), vol. 42, no. 1, pp. 64-77, 2015.

[108]    A. Chioreanu, S. Brad, C. Porumb, and S. Porumb, "E-maintenance ontology-based approach for heterogeneous distributed robotic production capabilities," International Journal of Computer Integrated Manufacturing, vol. 28, no. 2, pp. 200-212, 2015.

[109]    C. Chira and A. L. C. Bazzan, "Route assignment using multi-objective evolutionary search C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 141-148, 3 September 2015 through 5 September 2015 2015.

[110]    C. Chira, A. L. C. Bazzan, and R. J. F. Rossetti, "Multi-objective Evolutionary Traffic Assignment C3 - IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC," 18th IEEE International Conference on Intelligent Transportation Systems, ITSC 2015, vol. 2015-October, pp. 1177-1182, 15 September 2015 through 18 September 2015 2015.

[111]    C. Chira and C. Lemnaru, "A multi-objective evolutionary approach to imbalanced classification problems C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 149-154, 3 September 2015 through 5 September 2015 2015.

[112]    C. Chira, J. Sedano, J. R. Villar, M. Camara, and C. Prieto, "Shape-output gene clustering for time series microarrays C3 - Advances in Intelligent Systems and Computing," 10th International Conference on Soft Computing Models in Industrial and Environmental Applications, SOCO 2015, vol. 368, pp. 241-250, 15 June 2015 through 17 June 2015 2015.

[113]    O. Chiver, L. Neamt, and O. Matei, "Comparative study on sudden short-circuit currents of a synchronous generator C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 1688-1693, 10 June 2015 through 13 June 2015 2015.

[114]    T. Cioara, I. Anghel, M. Antal, S. Crisan, and I. Salomie, "Data center optimization methodology to maximize the usage of locally produced renewable energy C3 - 2015 Sustainable Internet and ICT for Sustainability, SustainIT 2015," 4th International Conference on Sustainable Internet and ICT for Sustainability, SustainIT 2015, 14 April 2015 through 15 April 2015 2015.

[115]    G. Ciobanu and E. N. Todoran, "Continuation semantics for concurrency with multiple channels communication," Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 9407, pp. 400-416, 2015.

[116]    G. Ciobanu and E. N. Todoran, "Correct metric semantics for a biologically-inspired formalism C3 - Proceedings - 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014," 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014, pp. 317-324, 22 September 2014 through 25 September 2014 2015.

[117]    I. Ciocan, C. Farcas, D. Petreus, N. Palaghita, and E. Lazar, "Comparison between fixed and solar oriented PV modules' energy production using a simplified PSIM model C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 221-225, 22 October 2015 through 25 October 2015 2015.

[118]    N. Cioica et al., "Water absorption and degradation of packages based on native corn starch with plasticizers," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 1, pp. 45-55, 2015.

[119]    N. Cioica, R. Fechete, C. Filip, I. B. Cozar, C. Cota, and E. M. Nagy, "NMR and SEM investigation of extruded native corn starch with plasticizers," Romanian Journal of Physics, vol. 60, no. 3-4, pp. 512-520, 2015.

[120]    N. Ciont, R. D. Cadar, and M. Iliescu, "Application software for processing Weigh-in-Motion traffic data," Civil-Comp Proceedings, vol. 108, 2015.

[121]    N. Ciont, R. D. Cadar, and M. Iliescu, "Application software for processing weigh-in-motion traffic data C3 - Civil-Comp Proceedings," 15th International Conference on Civil, Structural and Environmental Engineering Computing, CIVIL-COMP 2015, 1 September 2015 through 4 September 2015 2015.

[122]    N. Ciont, R. D. Cadar, M. Iliescu, and D. A. Lasləu, "Interactive application for the evaluation of the peak hour factor using weigh-in-motion traffic data," UPB Scientific Bulletin, Series C: Electrical Engineering and Computer Science, vol. 77, no. 1, pp. 121-128, 2015.

[123]    E. Ciupan, F. Lungu, and C. Ciupan, "ANN training method with a small number of examples used for robots control," International Journal of Computers, Communications and Control, vol. 10, no. 5, pp. 643-653, 2015.

[124]    A. M. Ciupe and N. M. Roman, "Study of ECG signal processing using wavelet transforms C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 27-30, 7 May 2015 through 9 May 2015 2015.

[125]    A. Ciupe, B. Orza, C. Florea, and A. Vlaicu, "Skill-oriented priority scheduling for solving the Resource Constrained Project Scheduling Problem C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 85-92, 3 September 2015 through 5 September 2015 2015.

[126]    A. Ciurte, T. Marita, and R. Buiga, "Circulating tumor cells classification and characterization in dark field microscopic images of unstained blood C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 367-374, 3 September 2015 through 5 September 2015 2015.

[127]    I. Clitan, C. Lungoci, V. Muresan, D. Moga, and V. Sita, "A robust temperature controller design for an innovative hyperthermic intraperitoneal chemotherapy equipment C3 - ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings," 12th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2015, vol. 2, pp. 84-91, 21 July 2015 through 23 July 2015 2015.

[128]    I. Clitan et al., "Digital temperature control for an hyperthermic intraperitoneal chemotherapy equipment C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 98-103, 27 May 2015 through 29 May 2015 2015.

[129]    I. Clitan et al., "Flow and temperature control for an innovative hyperthermic intraperitoneal chemotherapy equipment C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 162-167, 14 October 2015 through 16 October 2015 2015.

[130]    I. Clitan, V. Muresan, D. Moga, V. Sita, and C. Lungoci, "Measured signal identification and temperature controller design for a HIPEC device C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, pp. 304-308, 9 July 2015 through 11 July 2015 2015.

[131]    G. Cocian and C. Popa, "Measurement method for determining the residual flux deposits in a heat exchanger from a controlled atmosphere brazing line," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 1, pp. 187-193, 2015.

[132]    D. Cocorean, N. Plitea, C. Vaida, and D. Pisla, "Kinematic behaviour of 2-CRR-CYL-U parallel robot for brachytherapy C3 - 2015 IFToMM World Congress Proceedings, IFToMM 2015," 14th International Federation for the Promotion of Mechanism and Machine Science World Congress, IFToMM 2015, 25 October 2015 through 30 October 2015 2015.

[133]    I. Cojocaru, M. Moldovan, C. Sarosi, D. Leordean, and C. Alb, "Morphological biodegradation and the citotoxicity effect of some experimental biomaterials," Materiale Plastice, vol. 52, no. 3, pp. 321-324, 2015.

[134]    V. D. Colceriu, T. Ştefǎnut, V. Bâcu, and D. Gorgan, "Generating accuracy and integrity aware train movement maps using GNSS and MEMS sensors C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 441-446, 3 September 2015 through 5 September 2015 2015.

[135]    A. Coleşa, S. Lukács, V. Topan, R. Ciocaş, and A. Pop, "Efficient provisioning of a trustworthy environment for security-sensitive applications C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Conference on Trust and Trustworthy Computing, TRUST 2015, vol. 9229, pp. 300-309, 24 August 2015 through 26 August 2015 2015.

[136]    A. C. Coman, D. A. Todea, F. Popa, T. Radu, O. Cadar, and C. Borzan, "Multilateral characterization of masks and tubes surfaces in contact with respiratory system through ventilation," Journal of Optoelectronics and Advanced Materials, vol. 17, no. 9-10, pp. 1563-1571, 2015.

[137]    A. Comsa, I. Ivanciu, E. Luchian, V. Dobrota, and K. Steenhaut, "End-to-end delay minimization in an application-aware routing for wireless sensor networks C3 - 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings," 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015, pp. 80-84, 24 September 2015 through 26 September 2015 2015.

[138]    S. Conea, A. E. Pârvu, M. A. Taulescu, and L. Vlase, "Effects of Eryngium planum and Eryngium campestre extracts on ligature-induced rat periodontitis," Digest Journal of Nanomaterials and Biostructures, vol. 10, no. 2, pp. 693-704, 2015.

[139]    H. Constantinescu, O. Cazan, M. Păstrav, and C. Baeră, "Pure shear behaviour of high strength concrete elements C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 251-256, 18 June 2015 through 24 June 2015 2015.

[140]    H. Constantinescu, O. Cazan, H. Szilagyi, and A. Hegyi, "Experimental determination of Poisson’s ratio for high strength concrete using destructive tests C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 121-126, 18 June 2015 through 24 June 2015 2015.

[141]    O. Corbu, A. M. Ioani, M. M. Al Bakri Abdullah, V. Meiţə, H. Szilagyi, and A. V. Sandu, "The pozzoolanic activity level of powder waste glass in comparisons with other powders C3 - Key Engineering Materials," International Conference on Innovative Research, ICIR 2015, vol. 660, pp. 237-243, 14 May 2015 through 16 May 2015 2015.

[142]    S. Cornoiu and H. Valean, "Improving legal information retrieval using the Wikipedia knowledge base, legal ontology and the Eurovoc Thesaurus C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 111-116, 14 October 2015 through 16 October 2015 2015.

[143]    M. Cosma, "Influence of tool orientation in five-axes machining process," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 18-23, 2015.

[144]    S. C. Cosma, N. Balc, D. Leordean, M. Moldovan, M. Dudescu, and C. Borzan, "Customized medical applications of selective laser melting manufacturing," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 24-32, 2015.

[145]    A. D. Costea, A. Vatavu, and S. Nedevschi, "Obstacle localization and recognition for autonomous forklifts using omnidirectional stereovision C3 - IEEE Intelligent Vehicles Symposium, Proceedings," IEEE Intelligent Vehicles Symposium, IV 2015, vol. 2015-August, pp. 531-536, 28 June 2015 through 1 July 2015 2015.

[146]    A. D. Costea, A. V. Vesa, and S. Nedevschi, "Fast Pedestrian Detection for Mobile Devices C3 - IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC," 18th IEEE International Conference on Intelligent Transportation Systems, ITSC 2015, vol. 2015-October, pp. 2364-2369, 15 September 2015 through 18 September 2015 2015.

[147]    C. Coţa et al., "Spectroscopic investigation of the constituent components effect on the biodegradable package characteristics C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[148]    A. Cotetiu, R. Cotetiu, and N. Ungureanu, "Comparative Study Between The Alternative Used By The IMP Type Pecussion Drills And The Version Using Fluid Elements Regarding The Supplying, Command And Automatic Adjustment Systems Of The Injection Water Pressure," Archives of Mining Sciences, vol. 60, no. 4, pp. 879-888, 2015.

[149]    M. Covaciu and A. R. Kennedy, "Production process and properties of a highly porous Al alloy made using NaCl droplets as a space holder," Acta Metallurgica Sinica (English Letters), vol. 28, no. 8, pp. 1034-1040, 2015.

[150]    M. Crasmareanu and L. I. Pişcoran, "Invariant distributions and holomorphic vector fields in paracontact geometry," Turkish Journal of Mathematics, vol. 39, no. 4, pp. 467-476, 2015.

[151]    M. Cretu, A. Darabant, and R. V. Ciupa, "Magnetic Stimulation of the Spinal Cord: Evaluating the Characteristics of an Appropriate Stimulator," Artificial Organs, vol. 39, no. 10, pp. 841-848, 2015.

[152]    M. Cretu and D. D. Micu, "Improved coil design for repetitive magnetic stimulation of the spinal cord," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 34, no. 4, pp. 1043-1053, 2015.

[153]    D. A. Crişan, C. I. Radu, A. M. Suciu, F. Romanciuc, C. Socaciu, and M. Grigorescu, "Metabolomics in nonalcoholic fatty liver disease - A new technique for an open horizon," Human and Veterinary Medicine, vol. 7, no. 3, pp. 229-235, 2015.

[154]    R. Crisan, I. Nascu, E. Volcke, and R. De Keyser, "EPSAC for wastewater treatment process (BSM1) C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 403-408, 14 October 2015 through 16 October 2015 2015.

[155]    S. M. Cristescu and I. Nascu, "Sensitivity analyses of an activated sludge model for a wastewater treatment plant C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 595-600, 14 October 2015 through 16 October 2015 2015.

[156]    B. Croitoru, A. Tulbure, M. Abrudean, and M. Secara, "Creating a transducer electronic datasheet using I2C serial EEPROM memory and PIC32-based microcontroller development board C3 - Proceedings of SPIE - The International Society for Optical Engineering," 7th International Conference on Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies, ATOM-N 2014, vol. 9258, 21 August 2014 through 24 August 2014 2015.

[157]    C. Croitoru, A. Dogeanu, F. Bode, I. Nastase, and A. Meselm, "Heat transfer analysis for a transpired solar collector numerical model C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 4, pp. 939-944, 18 June 2015 through 24 June 2015 2015.

[158]    C. Croitoru, I. Nastase, F. Bode, A. Meslem, and A. Dogeanu, "Thermal comfort models for indoor spaces and vehicles - Current capabilities and future perspectives," Renewable and Sustainable Energy Reviews, vol. 44, pp. 304-318, 2015.

[159]    I. Crəciun, D. Inoan, D. Popa, and L. Tudose, "Generalized Golden Ratios defined by means," Applied Mathematics and Computation, vol. 250, pp. 221-227, 2015.

[160]    A. Cuibus, C. Cosma, L. E. Muntean, and Z. Kiss, "Experimental studies on the radioactivity and exhalation rate of several concrete mixtures with additions," Romanian Journal of Physics, vol. 60, no. 7-8, pp. 1183-1192, 2015.

[161]    E. N. Culea, P. Pascuta, M. Pustan, D. R. Tamas-Gavrea, L. Pop, and I. Vida-Simiti, "Effects of Eu:Ag codoping on structural, magnetic and mechanical properties of lead tellurite glass ceramics," Journal of Non-Crystalline Solids, vol. 408, pp. 18-25, 2015.

[162]    C. Czech, P. Guarneri, N. Thyagaraja, and G. Fadel, "Systematic design optimization of the metamaterial shear beam of a nonpneumatic wheel for low rolling resistance," Journal of Mechanical Design, Transactions of the ASME, vol. 137, no. 4, 2015.

[163]    L. Czumbil, D. D. Micu, C. Munteanu, and D. Stet, "Optimization of pipeline-overhead line right-of-way using genetic algorithms C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 531-534, 7 May 2015 through 9 May 2015 2015.

[164]    L. Czumbil, D. D. Micu, C. Munteanu, D. Stet, and B. Tomoioaga, "Optimal design of the pipeline right-of-way nearby high voltage transmission lines using genetic algorithms C3 - Proceedings of the Universities Power Engineering Conference," 50th International Universities Power Engineering Conference, UPEC 2015, vol. 2015-November, 1 September 2015 through 4 September 2015 2015.

[165]    D. Dadarlat et al., "Complementary photothermal techniques for complete thermal characterization of porous and semi-transparent solids," Journal of Thermal Analysis and Calorimetry, vol. 119, no. 1, pp. 301-308, 2015.

[166]    D. Dadarlat et al., "Erratum: Complementary photothermal techniques for complete thermal characterization of porous and semi-transparent solids (Journal of Thermal Analysis and Calorimetry DOI: 10.1007/s10973-014-4091-x)," Journal of Thermal Analysis and Calorimetry, vol. 119, no. 2, p. 1471, 2015.

[167]    P. Dan and B. Monica, "The study of electromagnetic field inside a multiloop antenna C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[168]    B. G. Dana, R. Corina, T. Rita, and T. Cezar, "A cross cultural model for lateral thinking management C3 - Proceedings of the 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015," 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015, pp. 240-252, 7 May 2015 through 8 May 2015 2015.

[169]    M. F. Danca, "Continuous Approximations of a Class of Piecewise Continuous Systems," International Journal of Bifurcation and Chaos, vol. 25, no. 11, 2015.

[170]    M. F. Danca, "Lyapunov exponents of a class of piecewise continuous systems of fractional order," Nonlinear Dynamics, vol. 81, no. 1-2, pp. 227-237, 2015.

[171]    M. F. Danca, M. A. Aziz-Alaoui, and M. Small, "A new piecewise linear Chen system of fractional-order: Numerical approximation of stable attractors," Chinese Physics B, vol. 24, no. 6, 2015.

[172]    M. F. Danca and R. Garrappa, "Suppressing chaos in discontinuous systems of fractional order by active control," Applied Mathematics and Computation, vol. 257, pp. 89-102, 2015.

[173]    M. F. Danca and W. K. S. Tang, "Parrondo's paradox for chaos control and anticontrol of fractional-order systems," Chinese Physics B, vol. 25, no. 1, 2015.

[174]    R. G. Danescu, R. Itu, and A. Petrovai, "Sensing the driving environment with smart mobile devices C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 271-278, 3 September 2015 through 5 September 2015 2015.

[175]    D. M. Daniel, C. Mihaela, and T. Romulus, "Combining feature extraction level and score level fusion in a multimodal biometric system C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[176]    M. Daraban, R. Fizesan, D. Pitica, and L. Viman, "A SPICE analysis on how PDNs can benefit from Crosstalk Avoidance Code C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 440-446, 6 May 2015 through 10 May 2015 2015.

[177]    M. Daraban, D. Pitica, and A. Taut, "An educational tool to analyze the electromagnetic radiation C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 403-408, 22 October 2015 through 25 October 2015 2015.

[178]    L. Darabant, M. Cretu, D. Rafiroiu, and R. Ciupa, "Evaluating the efficiency of stimulators used in magnetic stimulation of the spinal cord C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 275-280, 7 May 2015 through 9 May 2015 2015.

[179]    R. Dargent, R. Terebes, O. Lavialle, and P. Baylou, "3D - Tangential diffusion C3 - European Signal Processing Conference," 12th European Signal Processing Conference, EUSIPCO 2004, vol. 06-10-September-2004, pp. 485-488, 6 September 2004 through 10 September 2004 2015.

[180]    P. V. Dascal, P. Dolea, T. Palade, and O. Cristea, "Characterization of LEO satellites through ground-based Doppler observations C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[181]    R. David, R. Məluţan, and M. Borda, "TLS protocol: Improving using ElGamal elliptic curves and one-time-pad C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[182]    R. De Keyser, C. I. Muresan, and C. M. Ionescu, "A novel auto-tuning method for fractional order PI/PD controllers," ISA Transactions, 2015.

[183]    T. Deac, E. M. Nagy, C. Coţa, N. Cioica, and Z. Gyorgy, "Energy analysis of manufacturing process of biodegradable agricultural films," INMATEH - Agricultural Engineering, vol. 47, no. 3, pp. 67-74, 2015.

[184]    N. Deak, T. Gyorfi, K. Marton, L. Vacariu, and O. Cret, "Highly efficient true random number generator in FPGA devices using phase-locked loops C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 453-458, 27 May 2015 through 29 May 2015 2015.

[185]    C. Decean and S. Nedevschi, "Fusion of stereo and structure from motion for enhancing PatchMatch stereo C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 187-193, 3 September 2015 through 5 September 2015 2015.

[186]    M. B. Decebal and L. A. Pop, "Some aspects on legal obligations and rights decontaminating and cleaning active areas of bad privatised state enterprises," Journal of Environmental Protection and Ecology, vol. 16, no. 4, pp. 1534-1542, 2015.

[187]    A. Dehelean, A. Popa, S. Rada, and E. Culea, "EPR and magnetic characterization of Fe2O3-TeO2 and CuO-TeO2 glasses obtained by melt quenching and sol-gel processes," Journal of Magnetism and Magnetic Materials, vol. 381, pp. 131-137, 2015.

[188]    H. Demea, S. Demea, R. Holonec, and A. Demea, "The biophysical properties of cornea in analyzing glaucoma risk," Romanian Reports in Physics, vol. 67, no. 3, pp. 987-994, 2015.

[189]    Ş. Dezsi et al., "Antimicrobial and antioxidant activities and phenolic profile of Eucalyptus globulus Labill. and Corymbia ficifolia (F. Muell.) K.D. Hill & L.A.S. Johnson leaves," Molecules, vol. 20, no. 3, pp. 4720-4734, 2015.

[190]    Z. Diaconeasa et al., "Cerium oxide nanoparticles and its cytotoxicity human lung cancer cells," Romanian Biotechnological Letters, vol. 20, no. 4, pp. 10679-10687, 2015.

[191]    M. Diko, P. Rafajdus, P. Makys, P. Dubravka, L. Szabo, and M. Ruba, "A novel concept of short-flux path switched reluctance motor for electrical vehicles," Advances in Electrical and Electronic Engineering, vol. 13, no. 3, pp. 206-211, 2015.

[192]    T. Dippong, E. A. Levei, G. Borodi, F. Goga, and L. Barbu Tudoran, "Influence of Co/Fe ratio on the oxide phases in nanoparticles of CoxFe3-xO4," Journal of Thermal Analysis and Calorimetry, vol. 119, no. 2, pp. 1001-1009, 2015.

[193]    T. Dippong et al., "Structural and magnetic properties of Co<inf>x</inf>Fe<inf>3-x</inf>O<inf>4</inf> versus Co/Fe molar ratio," Journal of Magnetism and Magnetic Materials, vol. 394, pp. 111-116, 2015.

[194]    M. Dobra, A. Astilean, P. Dobra, and I. V. Sita, "Control loops comparative study based on IR thermal imaging for electrical drives with BLDC PM motors C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 78-82, 27 May 2015 through 29 May 2015 2015.

[195]    C. Dobrota, L. Lazar, and C. Baciu, "Assessment of physiological state of Betula pendula and Carpinus betulus through leaf reflectance measurements," Flora: Morphology, Distribution, Functional Ecology of Plants, vol. 216, pp. 26-34, 2015.

[196]    P. Dolea, P. V. Dascal, T. Palade, and O. Cristea, "Aspects regarding the use of LF radio transmitters for time dissemination C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[197]    O. Dolgikh et al., "Simulation of the role of vibration on Scanning Vibrating Electrode Technique measurements close to a disc in plane," Electrochimica Acta, 2015.

[198]    J. Domokos, O. Buza, and G. Toderean, "Romanian phonetic transcription dictionary for speeding up language technology development," Language Resources and Evaluation, vol. 49, no. 2, pp. 311-325, 2015.

[199]    D. Dubina, V. Ungureanu, and L. Gîlia, "Experimental investigations of cold-formed steel beams of corrugated web and built-up section for flanges," Thin-Walled Structures, vol. 90, pp. 159-170, 2015.

[200]    L. I. Dulău, "Impact of storage technologies upon power system losses," Journal of Electrical and Electronics Engineering, vol. 8, no. 1, pp. 9-12, 2015.

[201]    L. I. Dulau, "Optimization of a power system with distributed generation source C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 903-906, 7 May 2015 through 9 May 2015 2015.

[202]    L. I. Dulau, "Simulation of a distributed generation system C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 85-89, 27 May 2015 through 29 May 2015 2015.

[203]    L. I. Dulau, M. Abrudean, and D. Bica, "Impact of a photovoltaic power plant connection on the power system C3 - 2015 IEEE Eindhoven PowerTech, PowerTech 2015," IEEE Eindhoven PowerTech, PowerTech 2015, 29 June 2015 through 2 July 2015 2015.

[204]    E. H. Dulf, F. V. Dulf, and C. I. Muresan, "Fractional Model of the Cryogenic (13C) Isotope Separation Column," Chemical Engineering Communications, vol. 202, no. 12, pp. 1600-1606, 2015.

[205]    F. V. Dulf, D. C. Vodnar, E. H. Dulf, and M. I. Toşa, "Total Phenolic Contents, Antioxidant Activities, and Lipid Fractions from Berry Pomaces Obtained by Solid-State Fermentation of Two Sambucus Species with Aspergillus niger," Journal of Agricultural and Food Chemistry, vol. 63, no. 13, pp. 3489-3500, 2015.

[206]    A. Duluard et al., "Enhanced magnetoresistance by monoatomic roughness in epitaxial Fe/MgO/Fe tunnel junctions," Physical Review B - Condensed Matter and Materials Physics, vol. 91, no. 17, 2015.

[207]    L. I. Duləu, "Economic analysis of a microgrid C3 - 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014," 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014, 28 November 2014 through 29 November 2014 2015.

[208]    L. I. Duləu, "Simulation of a microgrid C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[209]    L. I. Duləu and M. Abrudean, "Simulation of a power system with renewable energy sources considering load profiles C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[210]    L. I. Duləu, M. Abrudean, and D. Bicə, "Impact of distributed generation upon Reghin - Ləpuşna Medium Voltage line C3 - 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014," 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014, 28 November 2014 through 29 November 2014 2015.

[211]    L. I. Duləu and D. Bicə, "Optimization of a power system with distributed generation sources C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[212]    S. Duma, I. Bud, D. Gusat, I. I. Pasca, and A. Bud, "Analyses of “aurul” tailing pond surface rehabilitation – by using regional resources C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 3, no. 1, pp. 33-39, 18 June 2015 through 24 June 2015 2015.

[213]    S. Duma, I. Bud, D. Gusat, I. I. Pasca, and A. Bud, "“Aurul” accident highlights cyanide utilization in mining industry. After fifteen years consequences… C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 3, no. 1, pp. 767-772, 18 June 2015 through 24 June 2015 2015.

[214]    A. Dziechciarz and C. Martis, "New shape of rotor flux barriers in synchronous reluctance machines based on Zhukovski curves C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 221-224, 7 May 2015 through 9 May 2015 2015.

[215]    D. Elenkova et al., "Morphology and Optical Properties of SiO2-Based Composite Thin Films with Immobilized Terbium(III) Complex with a Biscoumarin Derivative," International Journal of Polymer Analysis and Characterization, vol. 20, no. 1, pp. 42-56, 2015.

[216]    V. Estrada-Manzo, T. M. Guerra, and Z. Lendek, "Static output feedback control for continuous-time TS descriptor models: Decoupling the Lyapunov function C3 - IEEE International Conference on Fuzzy Systems," IEEE International Conference on Fuzzy Systems, FUZZ-IEEE 2015, vol. 2015-November, 2 August 2015 through 5 August 2015 2015.

[217]    V. Estrada-Manzo, Z. Lendek, and T. M. Guerra, "Improving observer design for discrete-time TS descriptor models under the quadratic framework C3 - IFAC-PapersOnLine," 2nd IFAC Conference on Embedded Systems, Computer Intelligence and Telematics, CESCIT 2015, vol. 28, no. 10, pp. 276-281, 22 June 2015 through 24 June 2015 2015.

[218]    V. Estrada-Manzo, Z. Lendek, and T. M. Guerra, "Observer design for robotic systems via takagi-sugeno models and linear matrix inequalities," Studies in Systems, Decision and Control, vol. 42, pp. 103-128, 2015.

[219]    V. Estrada-Manzo, Z. Lendek, T. M. Guerra, and P. Pudlo, "Controller Design for Discrete-Time Descriptor Models: A Systematic LMI Approach," IEEE Transactions on Fuzzy Systems, vol. 23, no. 5, pp. 1608-1621, 2015.

[220]    V. Estrada-Manzo, Z. Lendek, and T. M. Guerra, "Unknown input estimation for nonlinear descriptor systems via LMIs and Takagi-Sugeno models C3 - Proceedings of the IEEE Conference on Decision and Control," 54th IEEE Conference on Decision and Control, CDC 2015, vol. 54rd IEEE Conference on Decision and Control,CDC 2015, pp. 6349-6354, 15 December 2015 through 18 December 2015 2015.

[221]    R. Etz, D. Petreus, T. Frentiu, T. Patarau, and C. Orian, "An indirect method and equipment for temperature monitoring and control," Advances in Electrical and Computer Engineering, vol. 15, no. 4, pp. 87-94, 2015.

[222]    D. Eva-H, B. Roxana, and M. Cristina-I, "Fractional order PIλDμ controller design for mechatronic systems C3 - SIAM Conference on Control and Its Applications 2015," SIAM Conference on Control and Its Applications 2015, pp. 469-474, 8 July 2015 through 10 July 2015 2015.

[223]    C. Farago, G. Oltean, P. Farago, and S. Hintea, "An evolutionary approach for Nominal design and yield enhancement of analog amplifiers C3 - SACI 2015 - 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2015, pp. 265-270, 21 May 2015 through 23 May 2015 2015.

[224]    P. Farago, C. Farago, R. Groza, and S. Hintea, "An evolutionary optimization methodology of a low-power programmable Cochlear Implant C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, pp. 354-359, 9 July 2015 through 11 July 2015 2015.

[225]    P. Faragó, C. Faragó, G. Oltean, and S. Hintea, "An electronically tunable transconductance amplifier for use in auditory prostheses," Advances in Electrical and Computer Engineering, vol. 15, no. 4, pp. 95-100, 2015.

[226]    A. C. Fărcaş, S. A. Socaci, F. V. Dulf, M. Tofană, E. Mudura, and Z. Diaconeasa, "Volatile profile, fatty acids composition and total phenolics content of brewers' spent grain by-product with potential use in the development of new functional foods," Journal of Cereal Science, vol. 64, pp. 34-42, 2015.

[227]    C. Farcas, I. Ciocan, N. Palaghita, and R. Fizesan, "Weekly electronic pills dispenser with circular containers C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 125-129, 22 October 2015 through 25 October 2015 2015.

[228]    R. Farcaş, N. Dima, I. Vereş, S. Naş, and A. Poruţiu, "Monitoring the landslide topography in turda C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 377-384, 18 June 2015 through 24 June 2015 2015.

[229]    R. Fărcaş, I. Vereş, S. Naş, and A. Poruţiu, "Topographic monitoring of the lake "groapa burlacu" and its surrounding area, targu ocna, bacau county C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 577-584, 18 June 2015 through 24 June 2015 2015.

[230]    V. Farcas, N. Ilies, and R. Cot, "Co<inf>2</inf> and energy footprint of different retaining walls solutions. Masonry retaining wall vs. cantilever retaining wall," Environmental Engineering and Management Journal, vol. 14, no. 6, pp. 1323-1326, 2015.

[231]    C. T. Faria, R. Mongellaz, C. Oprea, F. Boon, S. Faid, and T. Thiemann, "Design Process of Advanced Reluctance Machines for Electric Vehicle Applications: On Target Setting, Optimization of Different Reluctance Motors Technologies and Assessment of the Most Promising Propulsion Technology for Electric Vehicle Applications C3 - 2015 IEEE Vehicle Power and Propulsion Conference, VPPC 2015 - Proceedings," 12th IEEE Vehicle Power and Propulsion Conference, VPPC 2015, 19 October 2015 through 22 October 2015 2015.

[232]    I. I. Farkas, A. Tulbure, and C. Farcas, "Advanced control procedure for autonomous underwater robots C3 - Proceedings of the 2015 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015," 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015, pp. P95-P100, 25 June 2015 through 27 June 2015 2015.

[233]    I. Ferenczi and S. Grozav, "Modeling the behavior of PROFINET IRT in gigabit ethernet network," Academic Journal of Manufacturing Engineering, vol. 13, no. 4, pp. 13-16, 2015.

[234]    C. Festila, R. Both, E. H. Dulf, M. Secara, and S. Chetan, "Original Extremum control method implemented in MPP photovoltaic systems C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 378-383, 14 October 2015 through 16 October 2015 2015.

[235]    S. Fidanova and P. C. Pop, "An ant algorithm for the partition graph coloring problem C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Conference on Numerical Methods and Applications, NMA 2014, vol. 8962, pp. 78-84, 20 August 2014 through 24 August 2014 2015.

[236]    I. Fiţigău, N. Tomai, and G. Toderean, "Network communication reliability analysis in terms of fault tree," Journal of Electrical and Electronics Engineering, vol. 8, no. 1, pp. 13-16, 2015.

[237]    R. Fizesan, O. Pop, and A. Taut, "Why the mounting inductance is important in designing a Power Distribution Network? C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 191-194, 22 October 2015 through 25 October 2015 2015.

[238]    R. V. Florian, "A new scale for rating scientific publications C3 - Proceedings of ISSI 2015 Istanbul: 15th International Society of Scientometrics and Informetrics Conference," 15th International Society of Scientometrics and Informetrics Conference, ISSI 2015, pp. 419-420, 29 June 2015 through 4 July 2015 2015.

[239]    A. Fodor, G. Chindris, D. Pitica, and R. Jano, "Guidelines on thermal management solutions for modern packaging technologies - A review C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 41-44, 22 October 2015 through 25 October 2015 2015.

[240]    A. Fodor, R. Jánó, and D. Pitica, "Component placement optimizations on PCBs for improved thermal behaviour C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 114-117, 6 May 2015 through 10 May 2015 2015.

[241]    D. Fodorean and L. Idoumghar, "Improved Performances of a PMSM with Reduced Torque Ripples, Optimized Based on Hybrid Algorithm, Dedicated for Light EV C3 - 2015 IEEE Vehicle Power and Propulsion Conference, VPPC 2015 - Proceedings," 12th IEEE Vehicle Power and Propulsion Conference, VPPC 2015, 19 October 2015 through 22 October 2015 2015.

[242]    D. Fodorean, C. Irimia, and P. Minciunescu, "Performances evaluation of a magnetic gear with high transmission ratio used for high speed applications," Progress in Electromagnetics Research Symposium, vol. 2015-January, pp. 627-631, 2015.

[243]    D. Fodorean, A. Popp, O. Birte, C. Martis, M. Sarrazin, and H. Van Der Auweraer, "Noise and vibration behavior and analysis conditions of a 45kW induction motor C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 2147-2152, 10 June 2015 through 13 June 2015 2015.

[244]    S. C. Folea and G. Mois, "A low-power wireless sensor for online ambient monitoring," IEEE Sensors Journal, vol. 15, no. 2, pp. 742-749, 2015.

[245]    S. Folea, G. Mois, C. I. Muresan, L. Miclea, R. De Keyser, and M. Cirstea, "Implementation of an extended prediction self-adaptive controller using LabVIEWTM C3 - Proceeding - 2015 IEEE International Conference on Industrial Informatics, INDIN 2015," 13th International Conference on Industrial Informatics, INDIN 2015, pp. 883-888, 22 July 2015 through 24 July 2015 2015.

[246]    T. Frentiu et al., "Analytical characterization of a method for mercury determination in food using cold vapour capacitively coupled plasma microtorch optical emission spectrometry-compliance with European legislation requirements," Analytical Methods, vol. 7, no. 2, pp. 747-752, 2015.

[247]    T. Frentiu et al., "Determination of Total Mercury in Fish Tissue Using a Low-Cost Cold Vapor Capacitively Coupled Plasma Microtorch Optical Emission Microspectrometer: Comparison with Direct Mercury Determination by Thermal Decomposition Atomic Absorption Spectrometry," Food Analytical Methods, vol. 8, no. 3, pp. 643-648, 2015.

[248]    T. Frentiu et al., "Application of low-cost electrothermal vaporization capacitively coupled plasma microtorch optical emission spectrometry for simultaneous determination of Cd and Pb in environmental samples," Microchemical Journal, vol. 121, pp. 192-198, 2015.

[249]    R. Frohlich, L. Tamás, and Z. Kato, "Homography estimation between omnidirectional cameras without point correspondences," Studies in Systems, Decision and Control, vol. 42, pp. 129-151, 2015.

[250]    L. Frosini, C. Harlisca, and L. Szabo, "Induction machine bearing fault detection by means of statistical processing of the stray flux measurement," IEEE Transactions on Industrial Electronics, vol. 62, no. 3, pp. 1846-1854, 2015.

[251]    M. Fulea, G. Şandru, S. Brad, and M. Maftei, "A new entrepreneurial decision-making support framework for assessing business line correlations," Amfiteatru Economic, vol. 17, no. SpecialIssue9, pp. 1198-1212, 2015.

[252]    O. Furdui, "The evaluation of a class of fractional part integrals," Integral Transforms and Special Functions, vol. 26, no. 8, pp. 635-641, 2015.

[253]    O. Furdui, "The evaluation of a quadratic and a cubic series with trigamma function," Applied Mathematics E - Notes, vol. 15, pp. 187-196, 2015.

[254]    O. Furdui and A. Sîntămărian, "Quadratic series involving the tail of ζ(k)," Integral Transforms and Special Functions, vol. 26, no. 1, pp. 1-8, 2015.

[255]    G. Furtos, L. Silaghi-Dumitrescu, K. Lewandowska, A. Sionkowska, and P. Pascuta, "Biocomposites for orthopedic and dental application," Key Engineering Materials, vol. 672, pp. 261-275, 2015.

[256]    M. S. Gabor, M. Belmeguenai, T. Petrisor, Jr., C. Ulhaq-Bouillet, S. Colis, and C. Tiusan, "Correlations between structural, electronic transport, and magnetic properties of Co2FeAl0.5Si0.5 Heusler alloy epitaxial thin films," Physical Review B - Condensed Matter and Materials Physics, vol. 92, no. 5, 2015.

[257]    M. S. Gabor, T. Petrisor, Jr., O. Pop, S. Colis, and C. Tiusan, "Temperature dependence of the perpendicular magnetic anisotropy in Ta/Co<inf>2</inf>FeAl/MgO structures probed by Anomalous Hall Effect," Journal of Magnetism and Magnetic Materials, vol. 392, pp. 79-82, 2015.

[258]    F. M. Gabor-Harosa, G. Samasca, O. P. Stan, and F. Mocean, "The importance of a disease register for the patients with non-celiac gluten sensitivity," International Journal of Celiac Disease, vol. 3, no. 4, pp. 136-138, 2015.

[259]    C. Gagiu, E. M. Pica, X. Querol, and C. S. Botezan, "Analysis of predictors related to soil contamination in recreational areas of Romania," Environmental Science and Pollution Research, vol. 22, no. 23, pp. 18885-18893, 2015.

[260]    A. I. Gal, L. Vladareanu, and R. I. Munteanu, "Sliding motion control with bond graph modeling applied on a robot leg," Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, vol. 60, no. 2, pp. 215-224, 2015.

[261]    B. Gavrea, "A Hermite-Hadamard type inequality with applications to the estimation of moments of continuous random variables," Applied Mathematics and Computation, vol. 254, pp. 92-98, 2015.

[262]    B. Gavrea, "A mean value theorem for the chebyshev functional," Mathematical Inequalities and Applications, vol. 18, no. 2, pp. 751-757, 2015.

[263]    I. Gavrea and M. Ivan, "A note on divided differences," Publications de l'Institut Mathematique, vol. 98, no. 112, pp. 147-151, 2015.

[264]    I. Gavrea and M. Ivan, "A sharp estimate for the Peano error representation," Applied Mathematics and Computation, vol. 252, pp. 14-19, 2015.

[265]    I. Gavrea and M. Ivan, "On the rate of convergence of discretely defined operators," Journal of Mathematical Analysis and Applications, vol. 432, no. 1, pp. 129-133, 2015.

[266]    I. Gavrea and M. Ivan, "The Bernstein Voronovskaja-type theorem for positive linear approximation operators," Journal of Approximation Theory, vol. 192, pp. 291-296, 2015.

[267]    J. Gawad et al., "An evolving plane stress yield criterion based on crystal plasticity virtual experiments," International Journal of Plasticity, vol. 75, pp. 141-169, 2015.

[268]    V. Geamən, D. Frunzə, I. Radomir, and M. A. Pop, "Numerical simulation of cyclic extrusion process for aluminum alloy a6060," UPB Scientific Bulletin, Series B: Chemistry and Materials Science, vol. 77, no. 2, pp. 159-168, 2015.

[269]    A. M. Gheldiu et al., "Assessment of fluvoxamine effects on the pharmacokinetics of zolpidem and its metabolite in healthy volunteers," Farmacia, vol. 6, no. 3, pp. 453-459, 2015.

[270]    A. M. Gheldiu, D. S. Popa, F. Loghin, and L. Vlase, "Oxidative Metabolism of Estrone Modified by Genistein and Bisphenol A in Rat Liver Microsomes," Biomedical and Environmental Sciences, vol. 28, no. 11, pp. 834-838, 2015.

[271]    A. M. Gheldiu, D. S. Popa, F. Loghin, and L. Vlase, "Oxidative Metabolism of Estrone Modified by Genistein and Bisphenol A in Rat Liver Microsomes," Biomedical and environmental sciences : BES, vol. 28, no. 11, pp. 834-838, 2015.

[272]    R. Gheletuş and N. Crişan, "Side lobes suppressing algorithms for eight elements linear uniform array antenna," Journal of Electrical and Electronics Engineering, vol. 8, no. 2, pp. 9-14, 2015.

[273]    C. M. Ghiciuc et al., "Rapid simultaneous LC/MS2 determination of rifampicin and 25-desacetyl rifampicin in human plasma for therapeutic drug monitoring," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 309-320, 2015.

[274]    I. Giosan, S. Nedevschi, and C. Pocol, "Shape improvement of traffic pedestrian hypotheses by means of stereo-vision and superpixels C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 217-222, 3 September 2015 through 5 September 2015 2015.

[275]    M. C. Giuroiu and T. Marita, "Gesture recognition toolkit using a Kinect sensor C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 317-324, 3 September 2015 through 5 September 2015 2015.

[276]    C. Golban, P. Cobarzan, and S. Nedevschi, "Direct formulas for stereo-based visual odometry error modeling C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 197-202, 3 September 2015 through 5 September 2015 2015.

[277]    H. Gonska, I. Raşa, and E. D. Stănilă, "Power series of the operators (Formula Presented.)," Positivity, vol. 19, no. 2, pp. 237-249, 2015.

[278]    N. Gougoulias et al., "Coir employed as soilless cultivation substrate and its interference with nutrient solution during two tomatoes cropping periodes (case study)," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 177-185, 2015.

[279]    N. Gougoulias, P. Vyrlas, L. Giurgiulescu, D. Kalfountzos, and F. Eugenia, "Evaluation of polyphenols content and antioxidant activity of two table grape varieties under environmental conditions of thessaly," Carpathian Journal of Food Science and Technology, vol. 7, no. 4, pp. 119-125, 2015.

[280]    A. Grama, T. Patarau, E. Lazar, and D. Petreus, "Estimating the size of the renewable energy generators in an isolated solar-biodiesel microgrid with lead-acid battery storage," Journal of Electrical and Electronics Engineering, vol. 8, no. 2, pp. 15-18, 2015.

[281]    A. Grama, D. Petreus, R. Etz, and T. Patarau, "Fuel consumption reduction of a diesel-electric power generator C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 381-384, 6 May 2015 through 10 May 2015 2015.

[282]    L. Grama and C. Rusu, "About quantization of audio signals for wildlife intruder detection systems C3 - 2015 European Conference on Circuit Theory and Design, ECCTD 2015," European Conference on Circuit Theory and Design, ECCTD 2015, 24 August 2015 through 26 August 2015 2015.

[283]    L. Grama and C. Rusu, "The quantization effect on audio signals for wildlife intruder detection systems C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 15th International Conference on Computer Aided Systems Theory, EUROCAST 2015, vol. 9520, pp. 655-662, 8 February 2015 through 13 February 2015 2015.

[284]    L. Grama, C. Rusu, G. Oltean, and L. Ivanciu, "Quantization effects on audio signals for detecting intruders in wild areas using TESPAR S-matrix and artificial neural networks C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[285]    I. C. Gros, M. Radulescu, P. Teodosescu, and C. Marginean, "Implementation of SVM-based Direct Thrust Control of two-phase permanent magnet tubular synchronous actuators C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 236-239, 7 May 2015 through 9 May 2015 2015.

[286]    I. Grout, L. Grindei, T. Ward, P. Snowden, C. B. Marner, and T. Welzer, "Widening participation in EIE programmes across Europe for students with disabilities C3 - 2015 International Conference on Information Technology Based Higher Education and Training, ITHET 2015," International Conference on Information Technology Based Higher Education and Training, ITHET 2015, 11 June 2015 through 13 June 2015 2015.

[287]    A. Groza and L. Corde, "Information retrieval in falktales using natural language processing C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 59-66, 3 September 2015 through 5 September 2015 2015.

[288]    A. Groza, I. Dragoste, I. Sincai, I. Jimborean, and V. Moraru, "An ontology selection and ranking system based on the analytic hierarchy process C3 - Proceedings - 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014," 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014, pp. 293-300, 22 September 2014 through 25 September 2014 2015.

[289]    A. Groza, I. A. Letia, A. Goron, and S. Zaporojan, "A formal approach for identifying assurance deficits in unmanned aerial vehicle software C3 - Advances in Intelligent Systems and Computing," 23rd International Conference on Systems Engineering, ICSEng 2014, vol. 1089, pp. 233-239, 19 August 2014 through 21 August 2014 2015.

[290]    T. M. Guerra, V. Estrada-Manzo, and Z. Lendek, "Observer design for Takagi-Sugeno descriptor models: An LMI approach," Automatica, vol. 52, pp. 154-159, 2015.

[291]    S. Gutoiu, O. Isnard, I. Chicinaş, F. Popa, A. Takacs, and V. Pop, "The influence of milling and annealing conditions on the structural and magnetic behavior of Nd<inf>2</inf>Fe<inf>14</inf>B/α-Fe hard/soft magnetic nanocomposites," Journal of Alloys and Compounds, vol. 646, pp. 859-865, 2015.

[292]    D. Hales et al., "Development of enoxaparin sodium polymeric microparticles for colon-specific delivery," Clujul Medical, vol. 88, no. 3, 2015.

[293]    D. Hales et al., "Development of a pH and time controlled release colon delivery system obtained by compressioncoating and film-coating," Farmacia, vol. 63, no. 4, pp. 510-517, 2015.

[294]    G. Harja, C. Muresan, I. Nascu, and G. Vlad, "Fractional order PI control strategy on an activated sludge wastewater treatment process C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 577-582, 14 October 2015 through 16 October 2015 2015.

[295]    T. Harko, G. Mocanu, and N. Stroia, "Self organized criticality in an one dimensional magnetized grid. Application to GRB X-ray afterglows," Astrophysics and Space Science, vol. 357, no. 1, pp. 1-9, 2015.

[296]    H. Harmens et al., "Heavy metal and nitrogen concentrations in mosses are declining across Europe whilst some "hotspots" remain in 2010," Environmental Pollution, vol. 200, pp. 93-104, 2015.

[297]    O. L. Hasna, F. C. Măcicășan, M. Dînșoreanu, and R. Potolea, "Modeling sentiment polarity with meta-features to achieve domain-independence C3 - Communications in Computer and Information Science," 6th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management, IC3K 2014, vol. 553, pp. 212-227, 21 October 2014 through 24 October 2014 2015.

[298]    Y. He, Q. Lu, and G. Liviu, "Effects of extraction processes on the antioxidant activity of apple polyphenols," CYTA - Journal of Food, vol. 13, no. 4, pp. 603-606, 2015.

[299]    C. Hebedean, C. Munteanu, A. Racasan, C. Pacurar, and D. Augustin, "The influence of parameters on the parasitic capacitance values in a planar transformer C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 838-843, 7 May 2015 through 9 May 2015 2015.

[300]    A. Hegyi, H. Vermesan, V. Rus, E. Grünwald, and G. Vermesan, "Corrosion of hot dip galvanized rebars in concrete under the attack of chlorides and freeze-thaw cycles," Galvanotechnik, vol. 106, no. 1, pp. 58-73, 2015.

[301]    M. Heilmann and I. Raşa, "On the decomposition of Bernstein operators," Numerical Functional Analysis and Optimization, vol. 36, no. 1, pp. 72-85, 2015.

[302]    L. Hoffer, C. Chira, G. Marcou, A. Varnek, and D. Horvath, "S4MPLE-Sampler for multiple protein-ligand entities: Methodology and rigid-site docking benchmarking," Molecules, vol. 20, no. 5, pp. 8997-9028, 2015.

[303]    A. Holhoş, "Uniform approximation of functions by Bernstein-Stancu operators," Carpathian Journal of Mathematics, vol. 31, no. 2, pp. 205-212, 2015.

[304]    A. C. Hosu, Z. I. Kiss, I. A. Ivanciu, M. Varga, and Z. A. Polgar, "Integrated ubiquitous connectivity and centralised information platform for intelligent public transportation systems," IET Intelligent Transport Systems, vol. 9, no. 6, pp. 573-581, 2015.

[305]    M. Hulea, R. Miron, V. Muresan, and C. Marcu, "WiPlatform, a sensing and event processing platform C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 314-317, 14 October 2015 through 16 October 2015 2015.

[306]    O. Iamandi, S. Popescu, M. Dragomir, and C. Morariu, "A critical analysis of project management models and its potenttial risks in softwarre development," Quality - Access to Success, vol. 16, no. 149, pp. 55-61, 2015.

[307]    A. Ilea et al., "Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis," Neuropediatrics, vol. 46, no. 4, pp. 242-247, 2015.

[308]    I. Ilea, L. Bombrun, C. Germain, I. Champion, R. Terebes, and M. Borda, "Statistical hypothesis test for maritime pine forest SAR images classification based on the geodesic distance C3 - International Geoscience and Remote Sensing Symposium (IGARSS)," IEEE International Geoscience and Remote Sensing Symposium, IGARSS 2015, vol. 2015-November, pp. 3215-3218, 26 July 2015 through 31 July 2015 2015.

[309]    I. Ilea, L. Bombrun, C. Germain, R. Terebes, and M. Borda, "Statistical hypothesis test for robust classification on the space of covariance matrices C3 - Proceedings - International Conference on Image Processing, ICIP," IEEE International Conference on Image Processing, ICIP 2015, vol. 2015-December, pp. 271-275, 27 September 2015 through 30 September 2015 2015.

[310]    L. Ilea, C. Boanta, C. Brisan, and V. Chiroiu, "Aspects concerning algorithms of VRML surfaces’ generation C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 2nd International Conference on Augmented and Virtual Reality, AVR 2015, vol. 9254, pp. 482-489, 31 August 2015 through 3 September 2015 2015.

[311]    N. M. Ilieş, I. M. Moldovan, and S. V. Moldovan, "Geotechnical and thermal aspects for underground houses on sliding slopes C3 - Geotechnical Engineering for Infrastructure and Development - Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015," 16th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015, vol. 4, pp. 1771-1776, 13 September 2015 through 17 September 2015 2015.

[312]    N. Ilies, V. Farcas, C. Gherman, V. Chiorean, and D. Popa, "Soils efficient improvement solutions with waste materials and binders," Journal of Environmental Protection and Ecology, vol. 16, no. 4, pp. 1397-1406, 2015.

[313]    D. A. Ilufiu-Varvara, L. Brânduşan, G. Arghir, and E. M. Pică, "Researches about the characterization of metallurgical slags for landfilled wastes minimization," Environmental Engineering and Management Journal, vol. 14, no. 9, pp. 2115-2126, 2015.

[314]    B. Ioan, B. Horia, and O. P. T. Susana, "Determination of the power generated by a wind turbine in constant wind and variable wind C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 769-773, 7 May 2015 through 9 May 2015 2015.

[315]    C. Ionescu, R. Both, C. Fustos, C. Festila, M. Gligan, and R. D. Keyser, "Control of a train of high purity distillation columns for efficient production of 13C isotopes C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 49-56, 27 May 2015 through 29 May 2015 2015.

[316]    C. Ionescu and C. Muresan, "Sliding Mode Control for a Class of Sub-Systems with Fractional Order Varying Trajectory Dynamics," Fractional Calculus and Applied Analysis, vol. 18, no. 6, pp. 1441-1451, 2015.

[317]    V. Ionescu, R. Potolea, and M. Dinsoreanu, "Data driven structural similarity: A distance measure for adaptive linear approximations of time series C3 - IC3K 2015 - Proceedings of the 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management," 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management, IC3K 2015, vol. 1, pp. 67-74, 12 November 2015 through 14 November 2015 2015.

[318]    D. Ionita, M. Cristea, and D. Banabic, "Viscoelastic behavior of PMMA in relation to deformation mode," Journal of Thermal Analysis and Calorimetry, vol. 120, no. 3, pp. 1775-1783, 2015.

[319]    D. Ionita, C. Gaina, M. Cristea, and D. Banabic, "Tailoring the hard domain cohesiveness in polyurethanes by interplay between the functionality and the content of chain extender," RSC Advances, vol. 5, no. 94, pp. 76852-76861, 2015.

[320]    R. I. Iovanov, I. Tomuță, A. Barbu, L. Rus, and S. E. Leucuța, "Preparation and in vitro characterization of pellets containing felodipine solid dispersions," Farmacia, vol. 63, no. 5, pp. 637-646, 2015.

[321]    D. Isoc, "Improved identifier to build fuzzy models for qualitative fault diagnosis systems C3 - European Control Conference, ECC 1999 - Conference Proceedings," 1999 European Control Conference, ECC 1999, pp. 689-693, 31 August 1999 through 3 September 1999 2015.

[322]    D. Isoc, "Preventing plagiarism in engineering education and research C3 - 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014," 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014, 28 November 2014 through 29 November 2014 2015.

[323]    D. Isoc and T. Isoc, "Practice of peer-review and the innovative engineering school C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 111-116, 7 May 2015 through 9 May 2015 2015.

[324]    D. Isoc and T. Isoc, "The innovative enterprise - A new, complex, multivalent solution C3 - 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014," 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014, 28 November 2014 through 29 November 2014 2015.

[325]    T. Itul, B. Gherman, D. Cocorean, and D. Pisla, "Inverse dynamics of 2-DOF parallel mechanism used for orientation C3 - Mechanisms and Machine Science," 5th European Conference on Mechanism Science, EUCOMES 2014, vol. 24, pp. 455-462, 16 September 2014 through 19 September 2014 2015.

[326]    C. Iulia et al., "Design of a temperature controller for an hyperthermic intraperitoneal chemotherapy equipment C3 - SACI 2015 - 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2015, pp. 49-54, 21 May 2015 through 23 May 2015 2015.

[327]    S. Iurian, I. Tomuţa, L. Rus, M. Achim, and S. E. Leucuta, "Optimization of the sonication process for meloxicam nanocrystals preparation," Clujul Medical, vol. 88, no. 3, 2015.

[328]    M. Ivan, "A note on the Hermite interpolation," Numerical Algorithms, vol. 69, no. 3, pp. 517-522, 2015.

[329]    I. A. Ivanciu, A. B. Rus, V. Dobrota, and J. Domingo-Pascual, "Active measurement of the available transfer rate used in an algorithm for generalized assignment problem C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[330]    L. N. Ivanciu and G. Oltean, "Design of telecommunication receivers using computational intelligence techniques," Computational Intelligence in Analog and Mixed-Signal (AMS) and Radio-Frequency (RF) Circuit Design, pp. 413-437, 2015.

[331]    M. I. Jaffar, W. H. W. Badaruzzaman, M. M. Al Bakri Abdullah, S. Baharom, L. M. Moga, and A. V. Sandu, "Relationship between panel stiffness and mid-span deflection in Profiled steel sheeting dry board with geopolymer concrete infill," Materiale Plastice, vol. 52, no. 2, pp. 243-248, 2015.

[332]    R. Jánó and A. Fodor, "Educational tool for capacitor lifetime prediction C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 500-504, 6 May 2015 through 10 May 2015 2015.

[333]    L. Jäntschi, L. L. Pruteanu, A. C. Cozma, and S. D. Bolboacə, "Inside of the Linear Relation between Dependent and Independent Variables," Computational and Mathematical Methods in Medicine, vol. 2015, 2015.

[334]    D. I. Julean, "Reportage: Romania and its Jewish museums," East European Jewish affairs, vol. 45, no. 2-3, pp. 279-289, 2015.

[335]    F. N. Jurca, M. Ruba, and C. Martis, "Analysis of permanent magnet synchronous machine for integrated starter-Alternator-booster applications C3 - 2015 International Conference on Electrical Drives and Power Electronics, EDPE 2015 - Proceedings," 18th International Conference on Electrical Drives and Power Electronics, EDPE 2015, pp. 272-276, 21 September 2015 through 23 September 2015 2015.

[336]    F. Jurca and D. Fodorean, "Steady-state analysis of permanent magnet synchronous machine for integrated starter-alternator applications," Progress in Electromagnetics Research Symposium, vol. 2015-January, pp. 658-663, 2015.

[337]    Z. Kaltenbacher and M. I. Máté, "Characteristics evolution of Transylvanian sand after Biogrout treatment C3 - Key Engineering Materials," International Conference on Innovative Research, ICIR 2015, vol. 660, pp. 294-297, 14 May 2015 through 16 May 2015 2015.

[338]    A. Kami, B. M. Dariani, A. Sadough Vanini, D. S. Comsa, and D. Banabic, "Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model," Journal of Materials Processing Technology, vol. 216, pp. 472-483, 2015.

[339]    P. Kapalo, F. Domnita, E. K. Burdová, R. Nagy, and M. Rysulová, "The ventilation rate determination in the office rooms C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 5, pp. 961-968, 18 June 2015 through 24 June 2015 2015.

[340]    P. Kapalo, A. Sedláková, F. Domnita, and L. Ťažký, "Analyze of air exchange requirements in the spaces of church C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 5, pp. 57-64, 18 June 2015 through 24 June 2015 2015.

[341]    Z. Kato and L. Tamas, "Relative pose estimation and fusion of 2D spectral and 3D Lidar images C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 5th International Workshop on Computational Color Imaging, CCIW 2015, vol. 9016, pp. 33-42, 24 March 2015 through 26 March 2015 2015.

[342]    B. S. Kirei, G. Oltean, and M. D. Topa, "Testbench for evaluations of maximum power point tracking algorithms for solar energy harvesting C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[343]    I. Kirizsán, "The applicability of technical regulations referring to interventions on historic load-bearing structures: Safety versus protection of heritage values?," Transsylvania Nostra, no. 36, pp. 2-12, 2015.

[344]    I. Kiss, B. Genge, P. Haller, and G. Sebestyén, "A framework for testing stealthy attacks in energy grids C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 553-560, 3 September 2015 through 5 September 2015 2015.

[345]    Z. I. Kiss, A. C. Hosu, M. Varga, and Z. A. Polgar, "Load balancing solution for heterogeneous wireless networks based on the knapsack problem C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, 9 July 2015 through 11 July 2015 2015.

[346]    Z. I. Kiss, Z. A. Polgar, M. P. Stef, and V. Bota, "Improving transmission reliability in wireless sensor networks using network coding," Telecommunication Systems, vol. 59, no. 4, pp. 509-521, 2015.

[347]    S. A. Köllo, A. Puskás, and G. Köllo, "Ballasted track versus ballastless track C3 - Key Engineering Materials," International Conference on Innovative Research, ICIR 2015, vol. 660, pp. 219-224, 14 May 2015 through 16 May 2015 2015.

[348]    J. D. Kouassi-Koffi, V. Muresan, S. N. Gnangui, A. Sturza, E. Mudura, and L. P. Kouamé, "Wheat Flour Dough Rheological Properties Measurement: Effects of the Target Values on the Attained Results," Journal of Texture Studies, vol. 46, no. 6, pp. 475-486, 2015.

[349]    S. Kula, "Acceleration of the FEM computations in electromagnetic analysis for switched reluctance motor C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 614-617, 7 May 2015 through 9 May 2015 2015.

[350]    S. Kula, "Implementation of the open-software models of switched reluctance motor on model-in-the-loop platform C3 - 2015 25th International Conference on Information, Communication and Automation Technologies, ICAT 2015 - Proceedings," 25th International Conference on Information, Communication and Automation Technologies, ICAT 2015, 29 October 2015 through 31 October 2015 2015.

[351]    I. Kuric, M. Císar, M. Novosád, D. Krchova, and S. Grozav, "Experimental device for practicing routines of machine tool precision measurement," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 39-44, 2015.

[352]    A. A. Laczko, M. V. Zaharia, M. M. Radulescu, and S. Brisset, "Modeling and simulation of a brushless DC permanent-magnet generator-based wind energy conversion system C3 - 2015 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015," 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015, 31 March 2015 through 2 April 2015 2015.

[353]    C. Lapusan, C. R. Rad, S. Besoiu, and A. Plesa, "Design of a humanoid robot head for studying human-robot interaction C3 - Proceedings of the 2015 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015," 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015, pp. WR15-WR18, 25 June 2015 through 27 June 2015 2015.

[354]    C. Lapusan, C. Rusu, L. Brai, and D. Mandru, "Development of a multifunctional robotic arm for in-pipe robots C3 - Proceedings of the 2015 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015," 7th International Conference on Electronics, Computers and Artificial Intelligence, ECAI 2015, pp. WR11-WR14, 25 June 2015 through 27 June 2015 2015.

[355]    S. László and A. Viorel, "Densely defined equilibrium problems," Journal of Optimization Theory and Applications, vol. 166, no. 1, pp. 52-75, 2015.

[356]    S. László and A. Viorel, "Generalized Monotone Operators on Dense Sets," Numerical Functional Analysis and Optimization, vol. 36, no. 7, pp. 901-929, 2015.

[357]    D. Lates, S. Noveanu, and C. Vencel, "Design and application of compliant mini-grippers for handling chemicals," Archive of Mechanical Engineering, vol. 62, no. 2, pp. 205-216, 2015.

[358]    T. S. Latinovic, S. I. Deaconu, M. T. Latinović, N. Malešević, and C. Barz, "Develop virtual joint laboratory for education like distance engineering system for robotic applications C3 - IOP Conference Series: Materials Science and Engineering," International Conference on Applied Sciences, ICAS 2014, vol. 85, no. 1, 2 October 2014 through 4 October 2014 2015.

[359]    E. Lazar, R. Etz, D. Petreus, T. Patarau, and I. Ciocan, "SCADA development for an islanded microgrid C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 147-150, 22 October 2015 through 25 October 2015 2015.

[360]    E. Lázár, T. Pǎtǎrǎu, R. Etz, and D. Petreuş, "Sizing photovoltaic-geothermal smart microgrid with battery storage interface C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 364-369, 6 May 2015 through 10 May 2015 2015.

[361]    I. Lázár et al., "Photocatalytic performance of highly amorphous titania-silica aerogels with mesopores: The adverse effect of the in situ adsorption of some organic substrates during photodegradation," Applied Surface Science, vol. 356, pp. 521-531, 2015.

[362]    L. Lazarescu, I. Nicodim, and D. Banabic, "Evaluation of drawing force and thickness distribution in the deep-drawing process with variable blank-holding C3 - Key Engineering Materials," 16th International Conference on Sheet Metal, SheMet 2015, vol. 639, pp. 33-40, 16 March 2015 through 18 March 2015 2015.

[363]    A. Lehmann et al., "Filling the gap between Earth observation and policy making in the Black Sea catchment with enviroGRIDS," Environmental Science and Policy, vol. 46, pp. 1-12, 2015.

[364]    Z. Lendek, T. M. Guerra, and J. Lauber, "Controller design for TS models using delayed nonquadratic Lyapunov functions," IEEE Transactions on Cybernetics, vol. 45, no. 3, pp. 453-464, 2015.

[365]    Z. Lendek, P. Raica, J. Lauber, and T. M. Guerra, "Observer design for discrete-time switching nonlinear models," Lecture Notes in Control and Information Sciences, vol. 457, pp. 27-58, 2015.

[366]    D. Leordean, C. Dudescu, T. Marcu, P. Berce, and N. Balc, "Customized implants with specific properties, made by selective laser melting," Rapid Prototyping Journal, vol. 21, no. 1, pp. 98-104, 2015.

[367]    D. Leordean, S. A. Radu, D. Frățilă, and P. Berce, "Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM," International Journal of Advanced Manufacturing Technology, vol. 79, no. 5-8, pp. 905-920, 2015.

[368]    I. A. Letia and A. Goron, "Model checking as support for inspecting compliance to rules in flexible processes," Journal of Visual Languages and Computing, vol. 28, pp. 100-121, 2015.

[369]    T. S. Letia and A. O. Kilyen, "Evolutionary synthesis of hybrid controllers C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 133-140, 3 September 2015 through 5 September 2015 2015.

[370]    S. Levente, "Contribution to charging of battery with pulses C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 165-168, 22 October 2015 through 25 October 2015 2015.

[371]    M. A. Lihet and V. Dadarlat, "How to build a honeypot System in the cloud C3 - 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings," 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015, pp. 190-194, 24 September 2015 through 26 September 2015 2015.

[372]    Q. Lu and G. Liviu, "Extraction optimization of pectin from fresh citrus peel with response surface methodology," Carpathian Journal of Food Science and Technology, vol. 7, no. 2, pp. 17-25, 2015.

[373]    O. Lucaciu et al., "In quest of optimal drug-supported and targeted bone regeneration in the cranio facial area: A review of techniques and methods," Drug Metabolism Reviews, vol. 47, no. 4, pp. 455-469, 2015.

[374]    O. Lucaciu et al., "Dental follicle stem cells in bone regeneration on titanium implants," BMC Biotechnology, vol. 15, no. 1, 2015.

[375]    E. Luchian, R. Terebes, and M. Cremene, "Design and implementation of a mobile VoIP system on Android C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[376]    C. Lung, S. Sabou, and A. Buchman, "Modelling and implementation of intelligent sensor networks with applications in emergency situations management C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 315-318, 22 October 2015 through 25 October 2015 2015.

[377]    C. Lungoci et al., "Hyperthermic intraperitoneal chemotherapy approach based on cyber-physical system paradigm," Control Engineering and Applied Informatics, vol. 17, no. 3, pp. 50-59, 2015.

[378]    C. Lungoci et al., "Advanced Temperature Control for Innovative HIPEC Equipment C3 - Procedia Computer Science," Conference on ENTERprise Information Systems/International Conference on Project MANagement/Conference on Health and Social Care Information Systems and Technologies, CENTERIS 2015, vol. 64, pp. 497-505, 7 October 2015 through 9 October 2015 2015.

[379]    N. Lungu and S. A. Ciplea, "Ulam-Hyers-Rassias stability of pseudoparabolic partial differential equations," Carpathian Journal of Mathematics, vol. 31, no. 2, pp. 233-240, 2015.

[380]    R. Lungu and F. Lungu, "Principles of modern management in the current governance and organization of the local christian churches a romanian christian orthodox perspective," European Journal of Science and Theology, vol. 11, no. 1, pp. 131-142, 2015.

[381]    E. Lupu, A. Apatean, and R. Arsinte, "Speaker diarization experiments for Romanian parliamentary speech C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[382]    A. Luţaş, S. Lukács, A. Coleșa, and D. Luţaş, "Proposed processor extensions for significant speedup of hypervisor memory introspection C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Conference on Trust and Trustworthy Computing, TRUST 2015, vol. 9229, pp. 249-267, 24 August 2015 through 26 August 2015 2015.

[383]    G. Macovei, P. Kovács-Pálffy, and P. Kónya, "Upper miocene lignite occurrences in the Oaş depression, Satu Mare County, Romania," Foldtani Kozlony, vol. 145, no. 1, pp. 45-52, 2015.

[384]    D. Maier, L. Anastasiu, R. Sârbu, and T. Eidenmüller, "Measuring the capacity of organizations innovation - major process of innovation management," Amfiteatru Economic, vol. 17, no. SpecialIssue9, pp. 1156-1166, 2015.

[385]    V. Maier, S. G. Pavel, H. G. Beleiu, V. Fərcaş, and C. Ciorca, "Actual aspects of flicker phenomenon C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 747-752, 7 May 2015 through 9 May 2015 2015.

[386]    R. Malutan and C. Grosan, "Web authentication methods using single sign on method and virtual keyboard C3 - Proceedings - 2015 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015," 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015, 28 October 2015 through 30 October 2015 2015.

[387]    S. Mandici and S. Nedevschi, "Probabilistic inverse sensor model based Digital Elevation Map creation for an omnidirectional stereovision system C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 231-237, 3 September 2015 through 5 September 2015 2015.

[388]    S. Manzetti and F. Mariasiu, "Electric vehicle battery technologies: From present state to future systems," Renewable and Sustainable Energy Reviews, vol. 51, pp. 1004-1012, 2015.

[389]    A. H. Marc, L. Fuksz, P. C. Pop, and D. Dənciulescu, "A novel hybrid algorithm for solving the clustered vehicle routing problem C3 - Lecture Notes in Artificial Intelligence (Subseries of Lecture Notes in Computer Science)," 10th International Conference on Hybrid Artificial Intelligent Systems, HAIS 2015, vol. 9121, pp. 679-689, 22 June 2015 through 24 June 2015 2015.

[390]    A. Marginean, I. A. Letia, and S. Zaporojan, "Using domain specific hierarchical good practice for ranking service compositions C3 - Proceedings - 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014," 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014, pp. 204-211, 22 September 2014 through 25 September 2014 2015.

[391]    A. Marginean, A. Petrovai, M. Negru, and S. Nedevschi, "Cooperative application for lane change maneuver on Smart Mobile devices C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 279-286, 3 September 2015 through 5 September 2015 2015.

[392]    D. Marian, I. R. Peter, and C. Pintea, "A class of generalized monotone operators," Journal of Mathematical Analysis and Applications, vol. 421, no. 2, pp. 1827-1843, 2015.

[393]    F. Mariasiu, "Numerical investigation of the effects of biofuel characteristics on the injector nozzle erosion process," Tribology and Lubrication Technology, vol. 71, no. 2, pp. 44-53, 2015.

[394]    F. Mariasiu, N. V. Burnete, D. Moldovanu, B. O. Varga, C. Iclodean, and L. Kocsis, "Effects of bioethanol ultrasonic generated aerosols application on diesel engine performances," Thermal Science, vol. 19, no. 6, pp. 1931-1941, 2015.

[395]    T. F. Marinca, H. F. Chicinaş, B. V. Neamţu, O. Isnard, and I. Chicinaş, "Structural, thermal and magnetic characteristics of Fe<inf>3</inf>O<inf>4</inf>/Ni<inf>3</inf>Fe composite powder obtained by mechanosynthesis-annealing route," Journal of Alloys and Compounds, vol. 652, pp. 313-321, 2015.

[396]    T. F. Marinca, I. Chicinaş, O. Isnard, and B. V. Neamțu, "Nanocrystalline/nanosized Fe3O4 particles obtained by heat treatment and mechanical milling," Optoelectronics and Advanced Materials, Rapid Communications, vol. 9, no. 5-6, pp. 730-733, 2015.

[397]    K. Marton and A. Suciu, "Towards a methodology for randomness assessment: Challenges and pitfalls," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 16, pp. 385-394, 2015.

[398]    C. Marutoiu et al., "Evaluation of conservation state by analysis of imperial gates' constituent materials belonging to Aşchileu Mic Wooden Church, Cluj County," Revista de Chimie, vol. 66, no. 7, pp. 992-996, 2015.

[399]    O. Matei and D. Contras, "Advanced genetic operators in the context of evolutionary ontology C3 - 2015 IEEE Congress on Evolutionary Computation, CEC 2015 - Proceedings," IEEE Congress on Evolutionary Computation, CEC 2015, pp. 9-14, 25 May 2015 through 28 May 2015 2015.

[400]    O. Matei, D. Contraş, and H. Vălean, "Relational crossover in evolutionary ontologies C3 - Advances in Intelligent Systems and Computing," 10th International Conference on Soft Computing Models in Industrial and Environmental Applications, SOCO 2015, vol. 368, pp. 165-175, 15 June 2015 through 17 June 2015 2015.

[401]    O. Matei, P. C. Pop, J. L. Sas, and C. Chira, "An improved immigration memetic algorithm for solving the heterogeneous fixed fleet vehicle routing problem," Neurocomputing, no. Part A, pp. 58-66, 2015.

[402]    K. Máthé and L. Buşoniu, "Vision and control for UAVs: A survey of general methods and of inexpensive platforms for infrastructure inspection," Sensors (Switzerland), vol. 15, no. 7, pp. 14887-14916, 2015.

[403]    A. Mäyrä, M. Aikio, K. Ojala, S. Mandici, A. Vatavu, and S. Nedevschi, "Fisheye optics for omnidirectional stereo camera: Performance evaluation for AGV applications C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 225-230, 3 September 2015 through 5 September 2015 2015.

[404]    C. Medrea, A. Kalfopoulos, D. Papageorgiou, and I. Chicinas, "Metallographic examination of an AISI H11 mandrel of a bridge die used in hot extrusion: Case study," International Journal of Structural Integrity, vol. 6, no. 5, pp. 578-588, 2015.

[405]    C. Melenti and I. L. Magyar, "Mapping heavy metal contamination by kriging in valea sesei tailing pond, Romania C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 2, pp. 715-722, 18 June 2015 through 24 June 2015 2015.

[406]    O. Melinte, L. Vladareanu, R. A. Munteanu, and H. Yu, "Haptic Interfaces for Compensating Dynamics of Rescue Walking Robots C3 - Procedia Computer Science," International Conference on Communications, Management, and Information Technology, ICCMIT 2015, vol. 65, pp. 218-224, 20 April 2015 through 22 April 2015 2015.

[407]    A. Méndez, Y. Reyes, G. Trejo, K. Stepień, and S. Ţălu, "Micromorphological characterization of zinc/silver particle composite coatings," Microscopy Research and Technique, vol. 78, no. 12, pp. 1082-1089, 2015.

[408]    V. Merie, M. Pustan, G. Negrea, and C. Bîrleanu, "Research on titanium nitride thin films deposited by reactive magnetron sputtering for MEMS applications," Applied Surface Science, vol. 358, pp. 525-532, 2015.

[409]    A. S. Mesaros et al., "In vitro assessment of tooth color changes due to orthodontic treatment using knowledge discovery methods," Journal of Adhesion Science and Technology, vol. 29, no. 20, pp. 2256-2279, 2015.

[410]    A. Mesaros et al., "Insights into the europium-doped yttrium oxalate thermal decomposition mechanism," Journal of Analytical and Applied Pyrolysis, vol. 116, pp. 96-101, 2015.

[411]    A. Mesaros et al., "A valence states approach for luminescence enhancement by low dopant concentration in Eu-doped ZnO nanoparticles," Journal of Materials Science, vol. 50, no. 18, pp. 6075-6086, 2015.

[412]    S. Mican, R. Hirian, O. Isnard, I. Chicinaş, and V. Pop, "Effect of Milling Conditions on the Microstructure and Interphase Exchange Coupling of Nd2Fe14B/α-Fe Nanocomposites C3 - Physics Procedia," 20th International Conference on Magnetism, ICM 2015, vol. 75, pp. 1314-1323, 5 July 2015 through 10 July 2015 2015.

[413]    S. Mican, R. Hirian, O. Isnard, I. Chicinaş, and V. Pop, "Erratum: Effect of milling conditions on the microstructure and interphase exchange coupling of Nd2Fe14B/α-Fe nanocomposites (Physics Procedia (2016) 75 (1314-1323)) C3 - Physics Procedia," 20th International Conference on Magnetism, ICM 2015, vol. 75, pp. 1468-1469, 5 July 2015 through 10 July 2015 2015.

[414]    V. C. Miclea, C. C. Vancea, and S. Nedevschi, "New sub-pixel interpolation functions for accurate real-time stereo-matching algorithms C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 173-178, 3 September 2015 through 5 September 2015 2015.

[415]    T. Micu, D. Micu, and D. Şteţ, "A geometrical method for conducting spheres in electrostatic field," Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, vol. 60, no. 4, pp. 345-354, 2015.

[416]    T. Micu, D. Micu, and D. Stet, "A geometrical method for finding the image charges for two orthogonally conducting spheres C3 - 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014," 2014 International Symposium on Fundamentals of Electrical Engineering, ISFEE 2014, 28 November 2014 through 29 November 2014 2015.

[417]    A. Mihaly Cozmuta et al., "Active packaging system based on Ag/TiO2 nanocomposite used for extending the shelf life of bread. Chemical and microbiological investigations," Packaging Technology and Science, vol. 28, no. 4, pp. 271-284, 2015.

[418]    A. Mihaly Cozmuta et al., "Preparation and characterization of improved gelatin films incorporating hemp and sage oils," Food Hydrocolloids, vol. 49, pp. 144-155, 2015.

[419]    D. Mihon, V. Bacu, V. Colceriu, and D. Gorgan, "Modeling of Earth Observation use cases through KEOPS system C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 455-460, 3 September 2015 through 5 September 2015 2015.

[420]    A. Milea, "Wesselényi manor House Park in Jibou, Sălaj county: Historical and contemporary data," Transsylvania Nostra, no. 33, pp. 33-47, 2015.

[421]    E. Mircia, L. Vlase, G. Hancu, M. Budau, and R. Soare, "Kinetic modelling of drug release from pentoxifylline matrix tablets based on hydrophilic, lipophilic and inert polymers," Acta Facultatis Pharmaceuticae Universitatis Comenianae, vol. 62, no. 2, pp. 5-12, 2015.

[422]    C. S. Miron-Borzan, M. C. Dudescu, K. A. Elghany, V. Ceclan, and P. Berce, "Analysis of mechanical proprieties of selective laser sintered polyamide parts obtained on different equipment," Materiale Plastice, vol. 52, no. 1, pp. 39-42, 2015.

[423]    D. Mitrea, S. Nedevschi, M. Abrudean, and R. Badea, "Colorectal cancer recognition from ultrasound images, using complex textural microstructure cooccurrence matrices, based on Laws' features C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, pp. 458-462, 9 July 2015 through 11 July 2015 2015.

[424]    A. Mocan et al., "HPLC/MS analysis of caffeic and chlorogenic acids from three romanian veronica species and their antioxidant and antimicrobial properties," Farmacia, vol. 63, no. 6, pp. 890-896, 2015.

[425]    A. Mocan, L. Vlase, D. C. Vodnar, A. M. Gheldiu, R. Oprean, and G. Crisan, "Antioxidant, antimicrobial effects and phenolic profile of lycium barbarum L. flowers," Molecules, vol. 20, no. 8, pp. 15060-15071A, 2015.

[426]    A. Mocan, D. C. Vodnar, L. Vlase, O. Crișan, A. M. Gheldiu, and G. Crișan, "Phytochemical characterization of Veronica officinalis L., V. teucrium L. and V. orchidea crantz from Romania and their antioxidant and antimicrobial properties," International Journal of Molecular Sciences, vol. 16, no. 9, pp. 21109-21127, 2015.

[427]    D. Moga, I. V. Sita, N. Stroia, P. Dobra, R. Moga, and D. Petreus, "Sensing and control strategies in tracking solar systems C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 989-995, 27 May 2015 through 29 May 2015 2015.

[428]    D. Moga, N. Stroia, D. Petreus, R. Moga, and R. A. Munteanu, "Embedded platform for Web-based monitoring and control of a smart home C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 1256-1261, 10 June 2015 through 13 June 2015 2015.

[429]    L. Moga, "Mechanical and thermal performance of straw bales C3 - Key Engineering Materials," International Conference on Innovative Research, ICIR 2015, vol. 660, pp. 231-236, 14 May 2015 through 16 May 2015 2015.

[430]    G. Mois, S. Folea, T. Sanislav, and L. Miclea, "Communication in Cyber-Physical Systems C3 - 2015 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19," 19th International Conference on System Theory, Control and Computing, ICSTCC 2015 - Joint Conference SINTES 19, SACCS 15, SIMSIS 19, pp. 303-307, 14 October 2015 through 16 October 2015 2015.

[431]    C. Mojolic, R. Hulea, and B. R. Pârv, "Weight optimization of large span steel truss structures with genetic algorithm C3 - AIP Conference Proceedings," International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014, vol. 1648, 22 September 2014 through 28 September 2014 2015.

[432]    D. I. Moldan, C. Viləu, P. Berce, and D. Leordean, "Designing and testing of a tripod used for emergency situations," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 57-62, 2015.

[433]    D. Moldovan et al., "Tools for mapping ontologies to relational databases: A comparative evaluation C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 77-83, 3 September 2015 through 5 September 2015 2015.

[434]    I. M. Moldovan, S. V. Moldovan, and N. M. Ilieș, "Earth-sheltered and underground homes as alternatives for the unfortunate post-communist residential developments C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 421-428, 18 June 2015 through 24 June 2015 2015.

[435]    I. M. Moldovan, S. V. Moldovan, and N. M. Ilieș, "Towards sustainable architecture: Underground and semi-buried houses versus conventional houses C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 607-614, 18 June 2015 through 24 June 2015 2015.

[436]    M. Moldovan et al., "Structural and morphological properties of HA-ZnO powders prepared for biomaterials," Open Chemistry, vol. 13, no. 1, pp. 725-733, 2015.

[437]    R. D. Moldovan and E. N. Todoran, "Immune system modeling and analysis using Bio-PEPA C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 475-482, 3 September 2015 through 5 September 2015 2015.

[438]    A. Molea, V. Popescu, and N. A. Rowson, "A comparative study of the photo-catalytic performance of amorphous and nano-crystalline TiO2," Optoelectronics and Advanced Materials, Rapid Communications, vol. 9, no. 3-4, pp. 431-435, 2015.

[439]    A. Molea et al., "Correlation of Physicochemical Properties with the Catalytic Performance of Fe-Doped Titanium Dioxide Powders," Industrial and Engineering Chemistry Research, vol. 54, no. 30, pp. 7346-7351, 2015.

[440]    R. B. Mos, M. Nasui, T. Petrisor, Jr., A. Mesaros, L. Ciontea, and T. Petrisor, "The thermal decomposition of metal-organic precursors for epitaxial growth of SrZrO3thin films," Journal of Analytical and Applied Pyrolysis, vol. 115, pp. 255-261, 2015.

[441]    S. C. Moşneag, V. Popescu, C. Neamţu, and G. Borodi, "Study on the removal of nitrate in groundwater from Căpuş, Cluj county by natural zeolite of Mirşid and granular activated carbon," Desalination and Water Treatment, vol. 56, no. 12, pp. 3313-3322, 2015.

[442]    C. Muntea and F. Domnita, "Air movement measurement and simulation inside a standard cleanroom, produced by an inlet device with double exponential profile C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 1, no. 4, pp. 843-850, 18 June 2015 through 24 June 2015 2015.

[443]    A. Muntean, I. Smical, and E. Nour, "The influence of the weather and climatic conditions and some hydrological and chemical characteristics of the Someş river, in the NW part of Romania," Geographica Pannonica, vol. 19, no. 1, pp. 1-5, 2015.

[444]    D. F. Muntean, I. Ivan, and L. Muresan, "Environmental implications concerning the chemical composition and particle distribution of anti – Skid material," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 207-218, 2015.

[445]    I. Muntean, R. Both, R. Crisan, and I. Nascu, "RGA analysis and decentralized control for a wastewater treatment plant C3 - Proceedings of the IEEE International Conference on Industrial Technology," 2015 IEEE International Conference on Industrial Technology, ICIT 2015, vol. 2015-June, no. June, pp. 453-458, 17 March 2015 through 19 March 2015 2015.

[446]    M. Muntean, H. Vălean, and L. Căbulea, "Improving classification with IF-THEN rules for multidimensional datasets," Control Engineering and Applied Informatics, vol. 17, no. 4, pp. 42-49, 2015.

[447]    L. Munteanu, V. Chiroiu, C. Brişan, D. Dumitriu, T. Sireteanu, and S. Petre, "On the 3D normal tire/off-road vibro-contact problem with friction," Mechanical Systems and Signal Processing, vol. 54, pp. 377-393, 2015.

[448]    L. Munteanu, D. Dumitriu, V. Chiroiu, C. Brişan, M. Bara, and D. Marin, "On the tactile sensing based on the smart materials," Computers, Materials and Continua, vol. 46, no. 2, pp. 79-103, 2015.

[449]    R. Munteanu, D. Iudean, C. Muresan, and V. Petean, "Access system in restricted areas based on programmable logic controller and GSM modem C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[450]    R. Munteanu and D. C. Peter, "The Process of merging Romanian universities: Technical university of Cluj-Napoca - North university of Baia Mare," Mergers and Alliances in Higher Education, pp. 273-285, 2015.

[451]    R. Munteanu, A. R. Vulea, D. Iudean, and R. Copindean, "Carbon Monoxide pollution map in the center of Cluj-Napoca City C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[452]    M. Murar and S. Brad, "Rapid development of control algorithms and interfaces for remote monitoring of robotic arm through internet of things (IoT) C3 - Mechanisms and Machine Science," 5th European Conference on Mechanism Science, EUCOMES 2014, vol. 24, pp. 941-948, 16 September 2014 through 19 September 2014 2015.

[453]    C. I. Muresan and E. H. Dulf, "Fractional order IMC based controller for time delay systems C3 - AIP Conference Proceedings," International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014, vol. 1648, 22 September 2014 through 28 September 2014 2015.

[454]    C. I. Muresan, E. H. Dulf, and R. Both, "Comparative Analysis of Different Control Strategies for a Train of Cryogenic 13C Separation Columns," Chemical Engineering and Technology, vol. 38, no. 4, pp. 619-631, 2015.

[455]    C. I. Muresan, E. H. Dulf, C. Copot, R. De Keyser, and C. Ionescu, "Design and analysis of a multivariable fractional order controller for a non-minimum phase system," JVC/Journal of Vibration and Control, vol. 22, no. 9, pp. 2187-2195, 2015.

[456]    C. I. Muresan, C. Ionescu, S. Folea, and R. De Keyser, "Fractional order control of unstable processes: the magnetic levitation study case," Nonlinear Dynamics, vol. 80, no. 4, pp. 1761-1772, 2015.

[457]    I. C. Muresan and R. Balc, "Finite element analysis of an extended end-plate connection using the T-stub approach C3 - AIP Conference Proceedings," International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014, vol. 1648, 22 September 2014 through 28 September 2014 2015.

[458]    M. P. Muresan, M. Negru, and S. Nedevschi, "Improving local stereo algorithms using binary shifted windows, fusion and smoothness constraint C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 179-185, 3 September 2015 through 5 September 2015 2015.

[459]    S. Muresan, I. Faloba, C. Lemnaru, and R. Potolea, "Pre-processing flow for enhancing learning from medical data C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 27-34, 3 September 2015 through 5 September 2015 2015.

[460]    V. Muręsan, "An approximation integration method for the solution of a differential equation with linear modification of the argument C3 - APLIMAT 2015 - 14th Conference on Applied Mathematics, Proceedings," 14th Conference on Applied Mathematics, APLIMAT 2015, pp. 608-617, 3 February 2015 through 5 February 2015 2015.

[461]    V. Muresan, M. Abrudean, T. Colosi, M. L. Unguresan, I. Clitan, and Z. Kovendi, "Modeling and simulation of the carbone dioxide absorption process in ethanolamine solution C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 112-118, 27 May 2015 through 29 May 2015 2015.

[462]    V. Mureşan, M. Abrudean, and D. Moga, "Modeling, Simulation and Control of a Nonlinear Distributed Parameter Isotope Separation Process," IFAC-PapersOnLine, vol. 48, no. 30, pp. 191-196, 2015.

[463]    V. Muresan et al., "Neural modeling and control of a 13C isotope separation process C3 - ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings," 12th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2015, vol. 1, pp. 254-263, 21 July 2015 through 23 July 2015 2015.

[464]    V. Mureşan and A. S. Mureşan, "On the theory of fixed point theorems for convex contraction mappings," Carpathian Journal of Mathematics, vol. 31, no. 3, pp. 365-371, 2015.

[465]    V. Muresan, M. L. Unguresan, C. Varodi, and J. Z. Szucs-Balazs, "Temperature influence over the absorption process of CO2 in octane C3 - Proceedings - 2015 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015," 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015, 28 October 2015 through 30 October 2015 2015.

[466]    G. Nagy et al., "Computerized ultrasound image analysis for noninvasive evaluation of hepatic steatosis," Medical Ultrasonography, vol. 17, no. 4, pp. 431-436, 2015.

[467]    C. I. Nandra and D. Gorgan, "Workflow Description Language for defining Big Earth Data processing tasks C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 461-468, 3 September 2015 through 5 September 2015 2015.

[468]    C. Nastasă, B. Tiperciuc, L. Vlase, A. Pîrnău, and O. Oniga, "Synthesis of new 5-(chromene-3-YL)methylene-2,4- thiazolidinediones," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 4, pp. 239-246, 2015.

[469]    M. Nasui et al., "Fluorine-free propionate route for the chemical solution deposition of YBa2Cu3O7-x superconducting films," Ceramics International, vol. 41, no. 3, pp. 4416-4421, 2015.

[470]    M. Neag, R. Oneţ, I. Kovács, and P. Mărtari, "Comparative analysis of simulation-based methods for deriving the phase- and gain-margins of feedback circuits with op-amps," IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 62, no. 3, pp. 625-634, 2015.

[471]    M. I. Neagu, L. Miclea, and S. Manich, "Improving security in cache memory by power efficient scrambling technique," IET Computers and Digital Techniques, vol. 9, no. 6, pp. 283-292, 2015.

[472]    V. Neagu, "Degradation of non-contacting radar antenna characteristics in improper installations C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 562-565, 7 May 2015 through 9 May 2015 2015.

[473]    M. Neal, J. Finlay, S. Karkoulian, D. Catana, and R. Pellegrino, "How business students view corruption, and why this should concern us: insights from Lebanon, Romania and the United States," Tertiary Education and Management, vol. 21, no. 2, pp. 140-159, 2015.

[474]    L. Neamt, M. Bartis, and O. Chiver, "Capacitive touch sensors sensibility for different ground hatch and shield electrode structures C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 957-960, 7 May 2015 through 9 May 2015 2015.

[475]    L. Neamt, O. Matei, and O. Chiver, "Optimised methodology for stepper motor simulation C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 1078-1082, 10 June 2015 through 13 June 2015 2015.

[476]    B. V. Neamţu, T. F. Marinca, I. Chicinaş, and O. Isnard, "Structural, magnetic and thermal characterization of amorphous FINEMET powders prepared by wet mechanical alloying," Journal of Alloys and Compounds, vol. 626, pp. 49-55, 2015.

[477]    B. V. Neamţu, T. F. Marinca, I. Chicinaş, O. Isnard, and F. Popa, "Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying," Advanced Powder Technology, vol. 26, no. 1, pp. 323-328, 2015.

[478]    S. Nedevschi, "Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015: Foreword C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, p. vii, 3 September 2015 through 5 September 2015 2015.

[479]    J. Negru, D. S. Popa, L. Vlase, D. Iacob, M. Achim, and V. Dorneanu, "High-throughput hplc method for rapid quantification of ketoprofen in human plasma," Farmacia, vol. 63, no. 5, pp. 770-775, 2015.

[480]    M. Negru, S. Nedevschi, and R. I. Peter, "Exponential Contrast Restoration in Fog Conditions for Driving Assistance," IEEE Transactions on Intelligent Transportation Systems, vol. 16, no. 4, pp. 2257-2268, 2015.

[481]    R. Nemati-Chari, K. Dehghani, A. Kami, and D. Banabic, "Application of response surface methodology for study of effective strain in equal channel angular pressing of AA6061 alloy," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 16, no. 2, pp. 184-192, 2015.

[482]    M. Nenciulescu, "Forms of subversion in the satirical prose of the'80s," Transylvanian Review, vol. 24, no. 2, pp. 139-147, 2015.

[483]    I. Nencu, L. Vlase, V. Istudor, and T. Mircea, "Preliminary research regarding urtica urens l. And Urtica Dioica L," Farmacia, vol. 63, no. 5, pp. 710-715, 2015.

[484]    S. C. Nicoara et al., "Development of sample clean up methods for the analysis of Mycobacterium tuberculosis methyl mycocerosate biomarkers in sputum extracts by gas chromatography-mass spectrometry," Journal of Chromatography B: Analytical Technologies in the Biomedical and Life Sciences, vol. 986-987, pp. 135-142, 2015.

[485]    M. Niculae et al., "In vitro synergistic antimicrobial activity of Romanian propolis and antibiotics against Escherichia coli isolated from bovine mastitis," Notulae Botanicae Horti Agrobotanici Cluj-Napoca, vol. 43, no. 2, pp. 327-334, 2015.

[486]    J. D. D. Nkapkop, J. Y. Effa, M. Borda, and R. Terebes, "A novel fast and secure chaos-based algorithm for image encryption C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Conference on Innovative Security Solutions for Information Technology and Communications, SECITC 2015, vol. 9522, pp. 87-101, 11 June 2015 through 12 June 2015 2015.

[487]    D. I. Noje and R. Malutan, "Head movement analysis in lie detection C3 - Proceedings - 2015 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015," 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015, 28 October 2015 through 30 October 2015 2015.

[488]    A. Novac and R. Precup, "Variational Properties of the Solutions for Second-Order Differential Equations and Systems on Semi-Line," Numerical Functional Analysis and Optimization, vol. 36, no. 7, pp. 930-941, 2015.

[489]    M. Olaru, V. Dinu, T. Keppler, B. Mocan, and A. Mateiu, "Study on the open innovation practices in romanian SMEs," Amfiteatru Economic, vol. 17, no. SpecialIssue9, pp. 1129-1141, 2015.

[490]    G. Oltean, L. Grama, L. Ivanciu, and C. Rusu, "Alarming events detection based on audio signals recognition C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[491]    G. Oltean, L. N. Ivanciu, and B. Kirei, "Signal approximation using GA guided wavelet decomposition C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[492]    F. Oniga, S. Prodan, and S. Nedevschi, "Traffic light detection on mobile devices C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 287-292, 3 September 2015 through 5 September 2015 2015.

[493]    F. Oniga, E. Sarkozi, and S. Nedevschi, "Fast obstacle detection using U-disparity maps with stereo vision C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 203-207, 3 September 2015 through 5 September 2015 2015.

[494]    S. Oniga and S. József, "Optimal Recognition Method of Human Activities Using Artificial Neural Networks," Measurement Science Review, vol. 15, no. 6, pp. 323-327, 2015.

[495]    C. Oprea, A. Dziechciarz, and C. Martis, "Comparative analysis of different synchronous reluctance motor topologies C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 1904-1909, 10 June 2015 through 13 June 2015 2015.

[496]    C. Oprisa, "A MinHash approach for clustering large collections of binary programs C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 157-163, 27 May 2015 through 29 May 2015 2015.

[497]    C. Oprişa, G. Cabǎu, and G. S. Pal, "Semi-automated verdicts assignment for potentially malicious programs C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 125-130, 3 September 2015 through 5 September 2015 2015.

[498]    C. Oprişa and N. Ignat, "A measure of similarity for binary programs with a hierarchical structure C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 117-123, 3 September 2015 through 5 September 2015 2015.

[499]    R. L. Orban, D. Salomie, M. Orban, and T. Lung, "Mechanical activation assisted self-propagating high-Temperature synthesis of Gamma TiAl-TiC Composites C3 - Proceedings Euro PM 2015: International Power Metallurgy Congress and Exhibition," International Power Metallurgy Congress and Exhibition, Euro PM 2015, 4 October 2015 through 7 October 2015 2015.

[500]    I. Orha and S. Oniga, "Activity recognition using an e-textile data acquisition system C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 335-339, 22 October 2015 through 25 October 2015 2015.

[501]    S. T. Oros, I. Berinde, and I. Vadan, "Design and analysis of permanent magnet moving coil type generator used in a micro-CHP generation system C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[502]    A. Paljanos, S. Miclaus, and C. Munteanu, "Occupational exposure of personnel operating military radio equipment: Measurements and simulation," Electromagnetic Biology and Medicine, vol. 34, no. 3, pp. 221-227, 2015.

[503]    E. Páll, L. Tamás, and L. Buşoniu, "Vision-based quadcopter navigation in structured environments," Studies in Systems, Decision and Control, vol. 42, pp. 265-290, 2015.

[504]    E. Papp, C. Micu, and D. Racolta, "The quantization of mesoscopic LC-circuits. Basic ideas and applications C3 - AIP Conference Proceedings," Physics Conference - Physics Without Frontiers, TIM 2014, vol. 1694, 20 November 2014 through 22 November 2014 2015.

[505]    P. Parau, C. Lemnaru, and R. Potolea, "Assessing vertex relevance based on community detection C3 - IC3K 2015 - Proceedings of the 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management," 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management, IC3K 2015, vol. 1, pp. 46-56, 12 November 2015 through 14 November 2015 2015.

[506]    B. R. Pârv, R. Hulea, and C. Mojolic, "Conceptual optimization using genetic algorithms for tube in tube structures C3 - AIP Conference Proceedings," International Conference on Numerical Analysis and Applied Mathematics 2014, ICNAAM 2014, vol. 1648, 22 September 2014 through 28 September 2014 2015.

[507]    M. Pârvu, L. Vlase, A. E. Pârvu, O. Rosca-Casian, A. M. Gheldiu, and O. Pârvu, "Phenolic compounds and antifungal activity of Hedera helix L. (Ivy) flowers and fruits," Notulae Botanicae Horti Agrobotanici Cluj-Napoca, vol. 43, no. 1, 2015.

[508]    S. Pasca and A. Pasca, "Numerical modeling of high-speed free bulging of thin-wall aluminum tubes under the action of impulse electromagnetic forces," Journal of Electrical and Electronics Engineering, vol. 8, no. 1, pp. 27-30, 2015.

[509]    A. E. I. Pastrav, A. Bara, T. Palade, and E. Puschita, "Assessing VoLTE performances for fundamental E-UTRAN technologies C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, 9 July 2015 through 11 July 2015 2015.

[510]    A. Pastrav, H. Ene, A. Bara, T. Palade, and E. Puschita, "Deploying an LTE cell in an urban area: Planning and traffic performance analysis C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[511]    A. Pastrav, T. Palade, and E. Puschita, "A proposed mechanism for traffic management during gateway outage periods in high throughput satellite systems C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, pp. 200-204, 9 July 2015 through 11 July 2015 2015.

[512]    A. Pastrav, D. Tataru, A. Bara, T. Palade, and E. Puschita, "Key performance indicators evaluation for LTE networks implementation C3 - 2014 11th International Symposium on Electronics and Telecommunications, ISETC 2014 - Conference Proceedings," 11th International Symposium on Electronics and Telecommunications, ISETC 2014, 14 November 2014 through 15 November 2014 2015.

[513]    M. Pastrav, H. Constantinescu, and C. Mircea, "Performant structure design based on experimental tests C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 211-218, 18 June 2015 through 24 June 2015 2015.

[514]    T. Patarau, D. Petreus, and R. Etz, "Analysis and optimization of a geothermal, biomass, solar hybrid system: An application of PV∗Sol software C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 370-375, 6 May 2015 through 10 May 2015 2015.

[515]    L. Patras, I. Giosan, and S. Nedevschi, "Body gesture validation using multi-dimensional dynamic time warping on Kinect data C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 301-307, 3 September 2015 through 5 September 2015 2015.

[516]    A. Peculea, V. T. DǍdârlat, E. Cebuc, and B. Iancu, "Test bench for routing optimization algorithms in Proxy Mobile IPv6 environments C3 - 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings," 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015, pp. 44-49, 24 September 2015 through 26 September 2015 2015.

[517]    A. Peter et al., "Silver functionalized titania-silica xerogels: Preparation, morpho-structural and photocatalytic properties, kinetic modeling," Journal of Alloys and Compounds, vol. 648, pp. 890-902, 2015.

[518]    A. Peter et al., "Morphology, structure, and photoactivity of two types of graphene oxide-TiO2 composites," Chemical Papers, vol. 69, no. 6, pp. 839-855, 2015.

[519]    A. Peter et al., "Development of Ag/TiO2-SiO2-coated food packaging film and its role in preservation of green lettuce during storage," Carpathian Journal of Food Science and Technology, vol. 7, no. 4, pp. 88-96, 2015.

[520]    A. Petrovai, R. Danescu, and S. Nedevschi, "A stereovision based approach for detecting and tracking lane and forward obstacles on mobile devices C3 - IEEE Intelligent Vehicles Symposium, Proceedings," IEEE Intelligent Vehicles Symposium, IV 2015, vol. 2015-August, pp. 634-641, 28 June 2015 through 1 July 2015 2015.

[521]    C. M. Pintea, "A Unifying Survey of Agent-Based Approaches for Equality-Generalized Traveling Salesman Problem," Informatica, vol. 26, no. 3, pp. 509-522, 2015.

[522]    C. M. Pintea, S. A. Ludwig, and G. C. Crisan, "Adaptability of a discrete PSO algorithm applied to the Traveling Salesman Problem with fuzzy data C3 - IEEE International Conference on Fuzzy Systems," IEEE International Conference on Fuzzy Systems, FUZZ-IEEE 2015, vol. 2015-November, 2 August 2015 through 5 August 2015 2015.

[523]    D. Pisla, B. Galdau, F. Covaciu, C. Vaida, D. Popescu, and N. Plitea, "Singularity analysis and control system of an innovative medical parallel robot C3 - 23rd International Conference for Production Research, ICPR 2015," 23rd International Conference for Production Research, ICPR 2015, 2 August 2015 through 6 August 2015 2015.

[524]    D. Pisla, B. Gherman, P. Tucan, C. Vaida, C. Govor, and N. Plitea, "On the kinematics of an innovative parallel robotic system for transperineal prostate biopsy C3 - 2015 IFToMM World Congress Proceedings, IFToMM 2015," 14th International Federation for the Promotion of Mechanism and Machine Science World Congress, IFToMM 2015, 25 October 2015 through 30 October 2015 2015.

[525]    C. S. Plesa, C. Raducan, M. Neag, and L. Radoias, "Precise and robust enable control circuitry for LDO voltage regulators C3 - Proceedings of the International Semiconductor Conference, CAS," 38th International Semiconductor Conference, CAS 2015, vol. 2015-December, pp. 301-304, 12 October 2015 through 14 October 2015 2015.

[526]    N. Plitea, A. Szilaghyi, and D. Pisla, "Kinematic analysis of a new 5-DOF modular parallel robot for brachytherapy," Robotics and Computer-Integrated Manufacturing, vol. 31, no. 1, pp. 70-80, 2015.

[527]    C. B. Pocol and L. Stan, "Ethical concerns in Romanian beekeeping," Know Your Food, pp. 400-405, 2015.

[528]    Z. A. Polgar, A. C. Hosu, Z. I. Kiss, and M. Varga, "Load balancing algorithms in heterogeneous networks for intelligent transportation systems C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, pp. 76-81, 9 July 2015 through 11 July 2015 2015.

[529]    A. Pop and I. Ardelean, "Monitoring the size evolution of capillary pores in cement paste during the early hydration via diffusion in internal gradients," Cement and Concrete Research, vol. 77, pp. 76-81, 2015.

[530]    A. Pop and M. S. Pop, "A generalization of hyers-ulam stability on m-semigroups," Miskolc Mathematical Notes, vol. 16, no. 1, pp. 407-421, 2015.

[531]    C. B. Pop, V. R. Chifu, I. Salomie, A. Stetco, and R. Plaian, "Lifestyle recommendation system for treating malnutrition," Studies in Computational Intelligence, vol. 570, pp. 41-46, 2015.

[532]    C. Pop et al., "M2O: A library for using ontologies in software engineering C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 69-75, 3 September 2015 through 5 September 2015 2015.

[533]    D. Pop, "Theorising between space and place: A case study on perceptive architecture – Serpentine gallery pavilions," Philobiblon, vol. 20, no. 2, pp. 356-381, 2015.

[534]    M. Pop and D. Frunza, "Finite element analysis of superalloys forward extrusion," Journal of Optoelectronics and Advanced Materials, vol. 17, no. 7-8, pp. 973-979, 2015.

[535]    M. Pop, D. Frunza, F. Popa, and A. Neag, "Experimental and numerical analysis of 7075 aluminum alloy fracture behavior," Journal of Optoelectronics and Advanced Materials, vol. 17, no. 11-12, pp. 1761-1766, 2015.

[536]    P. C. Pop, C. M. Pintea, C. Pop Sitar, and M. Hajdu-Məcelaru, "An efficient Reverse Distribution System for solving sustainable supply chain network design problem," Journal of Applied Logic, vol. 13, no. 2, pp. 105-113, 2015.

[537]    P. G. Pop, "DNA repeats detection using a dedicated dot-plot analysis C3 - 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015," 2015 38th International Conference on Telecommunications and Signal Processing, TSP 2015, 9 July 2015 through 11 July 2015 2015.

[538]    P. G. Pop and M. F. Vaida, "A visual tool for DNA repeats screening C3 - Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS," 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2015, vol. 2015-November, pp. 8193-8196, 25 August 2015 through 29 August 2015 2015.

[539]    P. P. Pop, A. Pop-Vadean, C. Barz, and O. Chiver, "Considerations regarding the concept of the level of reality in the process of learning the transdisciplinary approach C3 - IOP Conference Series: Materials Science and Engineering," International Conference on Applied Sciences, ICAS 2014, vol. 85, no. 1, 2 October 2014 through 4 October 2014 2015.

[540]    S. I. Pop, M. Dudescu, D. C. Bratu, V. V. Merie, and M. Pacurar, "Effect of esthetic coating on the load deflection and surface characteristics of the NiTi orthodontic archwires," Revista de Chimie, vol. 66, no. 3, pp. 364-367, 2015.

[541]    S. Pop, D. Pitica, and V. Bande, "Analyzing a vibrating wire transducer using coupled resonator circuits," Advances in Electrical and Computer Engineering, vol. 15, no. 3, pp. 87-92, 2015.

[542]    A. Pop-Vadean, P. P. Pop, C. Barz, and O. Chiver, "Applications of energy harvesting for ultralow power technology C3 - IOP Conference Series: Materials Science and Engineering," International Conference on Applied Sciences, ICAS 2014, vol. 85, no. 1, 2 October 2014 through 4 October 2014 2015.

[543]    A. Popa, N. M. Ilies, V. S. Farcas, and O. C. Muresan, "Geotechnical problems on Transylvanian historical buildings consolidation C3 - Geotechnical Engineering for Infrastructure and Development - Proceedings of the XVI European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015," 16th European Conference on Soil Mechanics and Geotechnical Engineering, ECSMGE 2015, vol. 6, pp. 3547-3552, 13 September 2015 through 17 September 2015 2015.

[544]    M. Popa, R. Bostan, N. Ilie, and S. Varvara, "Natural sorbents used for the removal of heavy metals from acidic wastewaters generated at 'Valea Sesei' tailing pond from Rosia Poeni mining perimeter (Romania)," Journal of Environmental Protection and Ecology, vol. 16, no. 3, pp. 839-849, 2015.

[545]    D. I. Popescu, "Managing the risks of noise exposure at work C3 - 22nd International Congress on Sound and Vibration, ICSV 2015," 22nd International Congress on Sound and Vibration, ICSV 2015, 12 July 2015 through 16 July 2015 2015.

[546]    G. L. Popescu, N. Filip, A. Molea, and V. Popescu, "The effect of using pyrolysis oils from polyethylene and diesel on the pollutant emissions from a single cylinder diesel engine," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 4, pp. 273-288, 2015.

[547]    G. L. Popescu, N. Filip, and V. Popescu, "A comparison between diesel and fuel obtained from recicled waste plastics used for fueled diesel engines," INMATEH - Agricultural Engineering, vol. 45, no. 1, pp. 141-148, 2015.

[548]    T. Popescu, A. C. Kacsó, D. Pisla, and G. Kacsó, "Brachytherapy next generation: Robotic systems," Journal of Contemporary Brachytherapy, vol. 7, no. 6, pp. 510-514, 2015.

[549]    V. Popescu, A. Molea, A. Dinescu, C. Rusu-Trişcă, M. Moldovan, and G. L. Popescu, "Optical properties of pbs crystals obtained on glass substrate from solutions containing hydroxylamine hydrochloride in an ultrasonic baths," Chalcogenide Letters, vol. 12, no. 7, pp. 363-373, 2015.

[550]    V. Popescu, S. Nedevschi, R. Danescu, and T. Marita, "A Lane Assessment Method Using Visual Information Based on a Dynamic Bayesian Network," Journal of Intelligent Transportation Systems: Technology, Planning, and Operations, vol. 19, no. 3, pp. 225-239, 2015.

[551]    G. E. Popiţa et al., "Evaluation of carbon dioxide and methane emission from Cluj-Napoca municipal landfill, Romania," Environmental Engineering and Management Journal, vol. 14, no. 6, pp. 1389-1398, 2015.

[552]    A. Popovici et al., "Modern mortars with electronic waste scraps (glass and plastic)," Materiale Plastice, vol. 52, no. 4, pp. 588-592, 2015.

[553]    A. Popovici et al., "Unconventional mortars with recycled cathode ray tubes waste glass," Environmental Engineering and Management Journal, vol. 14, no. 11, pp. 2661-2670, 2015.

[554]    A. Popp et al., "Real-time co-simulation platform for electromechanical vehicle applications C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 240-243, 7 May 2015 through 9 May 2015 2015.

[555]    A. Porfire, D. Muntean, M. Achim, L. Vlase, and I. Tomuta, "Simultaneous quantification of simvastatin and excipients in liposomes using near infrared spectroscopy and chemometry," Journal of Pharmaceutical and Biomedical Analysis, vol. 107, pp. 40-49, 2015.

[556]    A. Porfire et al., "Optimizing long-circulating liposomes for delivery of simvastatin to C26 colon carcinoma cells," Journal of Liposome Research, vol. 25, no. 4, pp. 261-269, 2015.

[557]    M. Porumb, I. Barbantan, C. Lemnaru, and R. Potolea, "REMed - Automatic relation extraction from medical documents C3 - 17th International Conference on Information Integration and Web-Based Applications and Services, iiWAS 2015 - Proceedings," 17th International Conference on Information Integration and Web-Based Applications and Services, iiWAS 2015, 11 December 2015 through 13 December 2015 2015.

[558]    F. L. Potra, T. Potra, and V. F. Soporan, "Contributions on optimizing approximations in the study of melting and solidification processes that occur in processing by electro-erosion C3 - TMS Annual Meeting," Advances in the Science and Engineering of Casting Solidification: An MPMD Symposium Honoring Doru Michael Stefanescu - TMS 2015 144th Annual Meeting and Exhibition, vol. 2015-March, pp. 391-398, 15 March 2015 through 19 March 2015 2015.

[559]    S. Prisca, M. Dinsoreanu, and C. Lemnaru, "Topic oriented auto-completion models approaches towards fastening auto-completion systems C3 - IC3K 2015 - Proceedings of the 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management," 7th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management, IC3K 2015, vol. 1, pp. 241-248, 12 November 2015 through 14 November 2015 2015.

[560]    S. Prisca, R. Potolea, and M. Dinsoreanu, "A language independent user adaptable approach for word auto-completion C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 43-49, 3 September 2015 through 5 September 2015 2015.

[561]    A. Puskas and L. M. Moga, "Sustainability of reinforced concrete frame structures - A case study," International Journal of Sustainable Development and Planning, vol. 10, no. 2, pp. 165-176, 2015.

[562]    A. Puskás, L. Moga, O. Corbu, and H. Szilagyi, "Opportunities for increasing the recycling rate of mineral waste in construction industry C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 203-210, 18 June 2015 through 24 June 2015 2015.

[563]    M. Pustan et al., "Reliability design of thermally actuated MEMS switches supported by V-Beams C3 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2015," 17th Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2015, 27 April 2015 through 30 April 2015 2015.

[564]    M. Pustan, C. Dudescu, and C. Birleanu, "Static response and stiction analysis of MEMS micromembranes for optical applications," Physica Status Solidi (C) Current Topics in Solid State Physics, vol. 12, no. 12, pp. 1322-1327, 2015.

[565]    M. Pustan, C. Dudescu, and C. Birleanu, "The effect of sensing area position on the mechanical response of mass-detecting cantilever sensor," Microsystem Technologies, vol. 21, no. 9, pp. 1827-1834, 2015.

[566]    H. Qin and O. Furdui, "Three open problems and a conjecture," Open Mathematics, vol. 13, no. 1, pp. 729-736, 2015.

[567]    A. Racasan, C. Munteanu, V. Topa, C. Pacurar, C. Hebedean, and C. Marcu, "Home appliances conducted electromagnetic emissions analysis and mitigation methods C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 356-361, 7 May 2015 through 9 May 2015 2015.

[568]    M. Rada et al., "Role of vanadium ions on structural, optical and electrochemical properties of the vanadate-lead glasses," Journal of Non-Crystalline Solids, vol. 414, pp. 59-65, 2015.

[569]    S. Rada et al., "Synthesis, structure, optical and electrochemical properties of the lead sulfate-lead dioxide-lead glasses and vitroceramics," Solid State Ionics, vol. 274, pp. 111-118, 2015.

[570]    A. Radu, A. Costan, B. Iancu, V. Dadarlat, and A. Peculea, "Intercloud platform for connecting and managing heterogeneous services with applications for e-health C3 - Proceedings - 2015 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015," 8th Romania Tier 2 Federation Grid, Cloud and High Performance Computing in Science, ROLCG 2015, 28 October 2015 through 30 October 2015 2015.

[571]    M. Radu, C. S. Cole, M. A. Dabacan, M. Ignat, A. Wong, and J. Harris, "Worldwide digital design contest: A decade of development and success developing students' hardware and software skills C3 - ASEE Annual Conference and Exposition, Conference Proceedings," 2015 122nd ASEE Annual Conference and Exposition, vol. 122nd ASEE Annual Conference and Exposition: Making Value for Society, no. 122nd ASEE Annual Conference and Exposition: Making Value for Society, 14 June 2015 through 17 June 2015 2015.

[572]    R. Radu, D. O. Micu, D. D. Micu, and A. Ceclan, "Analytical model for a Medium Voltage distribution grid's main elements - Transformers and cables C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[573]    S. A. Radu, V. D. Leordean, N. Bâlc, and O. Nemeş, "Resin type influence on moulded parts final dimensions," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 219-228, 2015.

[574]    C. Raducan and M. Neag, "Capacitorless LDO with fast transient response based on a high slew-rate error amplifier C3 - Proceedings of the International Semiconductor Conference, CAS," 38th International Semiconductor Conference, CAS 2015, vol. 2015-December, pp. 285-288, 12 October 2015 through 14 October 2015 2015.

[575]    A. T. G. M. Rădulescu, G. M. T. Rădulescu, N. Chira, S. Naş, and M. V. G. M. Rădulescu, "Considerations on the behavior of tall constructions under the effect of uneven exposure to sunlight C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 187-194, 18 June 2015 through 24 June 2015 2015.

[576]    A. T. G. M. Rădulescu, G. M. T. Rădulescu, N. Chira, S. Naş, and M. V. G. M. Rădulescu, "Theoretical research for the optimization of mathematical models of the real vertical of very high structures C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 569-576, 18 June 2015 through 24 June 2015 2015.

[577]    C. M. Rădulescu, G. M. T. Rădulescu, S. Naş, A. T. G. M. Rădulescu, and M. V. G. M. Rădulescu, "Study on improving the mathematical models used in structural health monitoring C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 455-462, 18 June 2015 through 24 June 2015 2015.

[578]    C. RǍdulescu, G. M. T. RǍdulescu, A. T. RǍdulescu, and M. V. RǍdulescu, "The study of factors that help accelerate the development of clusters C3 - Proceedings of the 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015," 26th International Business Information Management Association Conference - Innovation Management and Sustainable Economic Competitive Advantage: From Regional Development to Global Growth, IBIMA 2015, pp. 2820-2830, 11 November 2015 through 12 November 2015 2015.

[579]    C. Rădulescu, R. Toader, G. Boca, M. Abrudan, C. Anghel, and D. C. Toader, "Sustainable development in maramures county," Sustainability (Switzerland), vol. 7, no. 6, pp. 7622-7643, 2015.

[580]    G. M. T. Rădulescu, A. T. G. M. Rădulescu, M. V. G. M. Rădulescu, S. Naş, and C. M. Rădulescu, "Some aspects regarding creating a mathematical model of the behavior of a reinforced concrete element under the effect of sunshine, incheon grand bridge case study, Seoul, South Korea C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 447-454, 18 June 2015 through 24 June 2015 2015.

[581]    M. V. G. M. Rădulescu, G. M. T. Rădulescu, G. Damian, A. T. G. M. Rădulescu, and C. M. Rădulescu, "Mixed technological solutions for monitoring the behavior of structures in abandoned industrial sites C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 355-360, 18 June 2015 through 24 June 2015 2015.

[582]    M. V. G. M. Rădulescu, G. M. T. Rădulescu, A. T. G. M. Rădulescu, C. M. Rădulescu, and T. Popescu, "Theoretical and experimental research on laser-scanner verification of the verticality of the 351.5 m smoke chimney located on the industrial platform in baia mare, Romania C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 561-568, 18 June 2015 through 24 June 2015 2015.

[583]    I. Raşa, "Entropies and Heun functions associated with positive linear operators," Applied Mathematics and Computation, vol. 268, pp. 422-431, 2015.

[584]    Y. Reyes-Vidal et al., "Electrodeposition, characterization, and antibacterial activity of zinc/silver particle composite coatings," Applied Surface Science, vol. 342, pp. 34-41, 2015.

[585]    A. Roba and Z. Baruch, "An enhanced approach to dynamic power management for the Linux cpuidle subsystem C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 511-517, 3 September 2015 through 5 September 2015 2015.

[586]    M. D. Roman, R. A. Felseghi, and M. V. Mureşan, "Modelling and simulation of BOD and COD for effluent levels of an aeration tank from gherla waste water treatment plant," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 399-408, 2015.

[587]    M. Romera, G. Pastor, A. Martin, A. B. Orue, F. Montoya, and M. F. Danca, "Breaking points in quartic maps," International Journal of Bifurcation and Chaos, vol. 25, no. 4, 2015.

[588]    C. Rosu, G. E. Popita, D. Manciula, A. Popovici, O. Corbu, and A. Cozma, "Tanned leather waste: A hazardous waste or not?," Journal of Environmental Protection and Ecology, vol. 16, no. 3, pp. 899-907, 2015.

[589]    M. Ruba and D. Fodorean, "Investigation of switched reluctance machine for EV propulsion unit with torque smoothening strategy," Progress in Electromagnetics Research Symposium, vol. 2015-January, pp. 463-468, 2015.

[590]    M. Ruba, C. Marţis, L. Szabo, and F. Jurca, "Analysis of a switched reluctance machine for EV application with torque smoothening strategy C3 - 2015 International Conference on Electrical Drives and Power Electronics, EDPE 2015 - Proceedings," 18th International Conference on Electrical Drives and Power Electronics, EDPE 2015, pp. 266-271, 21 September 2015 through 23 September 2015 2015.

[591]    M. Ruba and M. M. Radulescu, "Analysis of a grid-connected wind energy conversion system based on complex simulation program C3 - 2015 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015," 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015, 31 March 2015 through 2 April 2015 2015.

[592]    D. Ruginə, Z. Diaconeasa, C. Coman, A. Bunea, C. Socaciu, and A. Pintea, "Chokeberry anthocyanin extract as pancreatic β-cell protectors in two models of induced oxidative stress," Oxidative Medicine and Cellular Longevity, vol. 2015, 2015.

[593]    L. M. Rus, I. Ielciu, R. Paltinean, L. Vlase, C. Ştefanescu, and G. Crişan, "Morphological and Histo-anatomical Study of Bryonia alba L. (Cucurbitaceae)," Notulae Botanicae Horti Agrobotanici Cluj-Napoca, vol. 43, no. 1, pp. 47-52, 2015.

[594]    V. Rus, A. Hegyi, H. Vermeşan, and A. E. Tiuc, "Kinetics of the corrosion process of hot dip galvanized steel reinfocement in fresh concrete," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 409-419, 2015.

[595]    C. Rusu and J. Astola, "Sequences ordering in minimum-phase sequences C3 - European Signal Processing Conference," 12th European Signal Processing Conference, EUSIPCO 2004, vol. 06-10-September-2004, pp. 93-96, 6 September 2004 through 10 September 2004 2015.

[596]    C. Rusu and J. Astola, "The extended 1-D (one-dimensional) discrete phase retrieval problem C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 15th International Conference on Computer Aided Systems Theory, EUROCAST 2015, vol. 9520, pp. 640-647, 8 February 2015 through 13 February 2015 2015.

[597]    C. Rusu and J. Astola, "The extended one-dimensional discrete phase retrieval problem C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[598]    C. Rusu and L. Grama, "Spectrograms, sparsograms and spectral signatures for wildlife intruder detection C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[599]    F. Rusu, M. Pustan, C. Bîrleanu, R. Müller, R. Voicu, and A. Baracu, "Analysis of the surface effects on adhesion in MEMS structures," Applied Surface Science, vol. 358, pp. 634-640, 2015.

[600]    M. A. Rusu, D. Ioniţă, V. Cârlescu, G. Prisăcaru, and D. Olaru, "Characterization of some types of polymers by friction behaviour," Romanian Review Precision Mechanics, Optics and Mechatronics, vol. 2015, no. 48, pp. 110-116, 2015.

[601]    T. Rusu, A. C. Pop, L. Szabó, and C. Martis, "Study of winding arrangement and material quality effects on the core losses in high speed switched reluctance machines C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[602]    C. Rədulescu, G. Boca, R. Toader, C. Toader, and G. M. T. Rədulescu, "Key factors of success in clusters: Social-capital networking C3 - Proceedings of the 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015," 25th International Business Information Management Association Conference - Innovation Vision 2020: From Regional Development Sustainability to Global Economic Growth, IBIMA 2015, pp. 160-173, 7 May 2015 through 8 May 2015 2015.

[603]    A. Sabou and D. Gorgan, "A parallel, distributed, high-performance architecture for simulating particle-based models C3 - Proceedings - 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014," 16th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2014, pp. 500-507, 22 September 2014 through 25 September 2014 2015.

[604]    A. M. Salantiu, C. Fekete, L. Muresan, P. Pascuta, F. Popa, and C. Popa, "Anodic oxidation of PM porous titanium for increasing the corrosion resistance of endosseous implants," Materials Chemistry and Physics, vol. 149, pp. 453-459, 2015.

[605]    A. M. Salantiu et al., "Porous titanium - An enhanced support for human osteoblasts after anodization and c-RGD immobilization," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 45-58, 2015.

[606]    L. C. Salanţə et al., "Characterisation of hop varieties grown in romania based on their contents of bitter acids by HPLC in combination with chemometrics approach," Czech Journal of Food Sciences, vol. 33, no. 2, pp. 148-155, 2015.

[607]    A. Samuila, M. Bilici, and L. Dascalescu, "Recycling of PS/PVC granular waste using a fluidized-bed two-insulated-rolls-type tribo-aero-electrostatic separator C3 - 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015," 2015 9th International Symposium on Advanced Topics in Electrical Engineering, ATEE 2015, pp. 254-259, 7 May 2015 through 9 May 2015 2015.

[608]    H. Sándor, B. Genge, and G. Sebestyén-Pál, "Resilience in the Internet of Things: The Software Defined Networking approach C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 545-552, 3 September 2015 through 5 September 2015 2015.

[609]    T. Sanislav, G. Mois, and L. Miclea, "A new approach towards increasing Cyber-Physical Systems dependability C3 - Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015," 2015 16th IEEE International Carpathian Control Conference, ICCC 2015, pp. 443-447, 27 May 2015 through 30 May 2015 2015.

[610]    D. M. Sas and S. Mihai, "Preliminaries in numerical simulation of isotope separation closed-loop processes C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[611]    D. M. Sas and S. Mihai, "Preliminaries in numerical simulation of isotope separation open-loop processes C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[612]    G. Sebestyen, D. Muresan, and A. Hangan, "Road quality evaluation with mobile devices C3 - Proceedings of the 2015 16th International Carpathian Control Conference, ICCC 2015," 2015 16th IEEE International Carpathian Control Conference, ICCC 2015, pp. 458-464, 27 May 2015 through 30 May 2015 2015.

[613]    M. Secara and D. M. Sas, "Mathematical model for 18O isotope separation column operated by product extraction regime C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[614]    M. Secara and D. M. Sas, "Mathematical model for 18O separation column based on chemical exchange between nitric oxides and nitric acid solution operated at total reflux C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[615]    R. Shikhgasan, Ţ. Ştefan, S. Dinara, S. Sebastian, and R. Guseyn, "Epitaxy of silicon carbide on silicon: Micromorphological analysis of growth surface evolution," Superlattices and Microstructures, vol. 86, pp. 395-402, 2015.

[616]    D. Simon, C. Boianceanu, G. De Mey, and V. Topa, "Experimental Reliability Improvement of Power Devices Operated under Fast Thermal Cycling," IEEE Electron Device Letters, vol. 36, no. 7, pp. 696-698, 2015.

[617]    D. Simon, C. Boianceanu, G. De Mey, and V. Topa, "Reliability characterization of power devices which operate under power cycling C3 - Proceedings of the International Semiconductor Conference, CAS," 38th International Semiconductor Conference, CAS 2015, vol. 2015-December, pp. 153-156, 12 October 2015 through 14 October 2015 2015.

[618]    A. Sîntəmərian, "Sharp estimates regarding the remainder of the alternating harmonic series," Mathematical Inequalities and Applications, vol. 18, no. 1, pp. 347-352, 2015.

[619]    R. S. Şipoş et al., "Ovariectomized rats’ femur treated with fibrates and statins. Assessment of pore-size distribution by 1H-NMR relaxometry," Romanian Journal of Morphology and Embryology, vol. 56, no. 2, pp. 743-752, 2015.

[620]    R. S. Şipos, R. Fechete, D. Moldovan, I. Şuş, S. Szasz, and Z. Pávai, "Assessment of femoral bone osteoporosis in rats treated with simvastatin or fenofibrate," Open Life Sciences, vol. 10, no. 1, pp. 379-387, 2015.

[621]    I. V. Sita, P. Dobra, D. Moga, R. Manescu, V. Muresan, and I. Clitan, "Optimization of residential heating systems using accumulators C3 - 2015 IEEE 15th International Conference on Environment and Electrical Engineering, EEEIC 2015 - Conference Proceedings," 15th IEEE International Conference on Environment and Electrical Engineering, EEEIC 2015, pp. 2165-2170, 10 June 2015 through 13 June 2015 2015.

[622]    R. R. Slavescu, A. Bali, and K. C. Slavescu, "Building annotation rules for text description of endoscopies in romanian - An NLP-free approach C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 19-25, 3 September 2015 through 5 September 2015 2015.

[623]    R. R. Slavescu, R. A. Persa, and K. C. Slavescu, "Association rules mining with categories and regular expressions based pruning C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 5-12, 3 September 2015 through 5 September 2015 2015.

[624]    I. Smical, A. Muntean, and E. Nour, "Research on the surface water quality in mining influenced area in north-western part of Romania," Geographica Pannonica, vol. 19, no. 1, pp. 20-30, 2015.

[625]    K. Sodjavi, B. Montagné, P. Bragança, A. Meslem, F. Bode, and M. Kristiawan, "Impinging cross-shaped submerged jet on a flat plate: a comparison of plane and hemispherical orifice nozzles," Meccanica, vol. 50, no. 12, pp. 2927-2947, 2015.

[626]    M. B. Soporan and O. Nemeş, "Quantitative analysis of the noncompliant landfill constituents," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 201-206, 2015.

[627]    V. F. Soporan, L. Nascutiu, B. Soporan, and C. Pavai, "Case studies of methane dispersion patterns and odor strength in vicinity of municipal solid waste landfill of Cluj-Napoca, Romania, using numerical modeling," Atmospheric Pollution Research, vol. 6, no. 2, pp. 312-321, 2015.

[628]    S. Stach et al., "Morphological features in aluminum nitride epilayers prepared by magnetron sputtering," Materials Science- Poland, vol. 33, no. 1, pp. 175-184, 2015.

[629]    S. Stach et al., "Stereometric Parameters of the Cu/Fe NPs Thin Films," Journal of Physical Chemistry C, vol. 119, no. 31, pp. 17887-17898, 2015.

[630]    A. Stan, C. Valentini-Botinhao, M. Giurgiu, and S. King, "Phonetic segmentation of speech using STEP and t-SNE C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[631]    M. Stan, A. Popa, D. Toloman, T. D. Silipas, D. C. Vodnar, and G. Katona, "Enhanced antibacterial activity of zinc oxide nanoparticles synthesized using Petroselinum crispum extracts C3 - AIP Conference Proceedings," 10th International Conference Processes in Isotopes and Molecules, PIM 2015, vol. 1700, 23 September 2015 through 25 September 2015 2015.

[632]    A. A. Stashkevich et al., "Experimental study of spin-wave dispersion in Py/Pt film structures in the presence of an interface Dzyaloshinskii-Moriya interaction," Physical Review B - Condensed Matter and Materials Physics, vol. 91, no. 21, 2015.

[633]    O. Stefan, "Opportunities for determining the stability of the subterranean mining areas from the mining region of maramures – Romania by using 3D laser scan C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 2, pp. 399-406, 18 June 2015 through 24 June 2015 2015.

[634]    O. Stefan, T. L. Dragomir, and A. Codrean, "Observer-based delay compensation for networked control systems - Analysis and synthesis C3 - 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015," 21st International Conference on Automation and Computing, ICAC 2015, 11 September 2015 through 12 September 2015 2015.

[635]    C. Stimming, A. Krengel, M. Boehning, A. Vatavu, S. Mandici, and S. Nedevschi, "Multi-level on-board data fusion for 2D safety enhanced by 3D perception for AGVs C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 239-244, 3 September 2015 through 5 September 2015 2015.

[636]    R. Stiufiuc, C. Iacovita, G. Stiufiuc, A. Florea, M. Achim, and C. M. Lucaciu, "A new class of pegylated plasmonic liposomes: Synthesis and characterization," Journal of Colloid and Interface Science, vol. 437, pp. 17-23, 2015.

[637]    C. I. Stoica et al., "Synthesis, lipophilicity and antimicrobial activity evaluation of some new thiazolyl-oxadiazolines," Clujul Medical, vol. 88, no. 4, pp. 521-529, 2015.

[638]    I. V. Sucala, "Managers of Transition—Leadership in Post-Communist Romanian Companies," Europe - Asia Studies, vol. 67, no. 4, pp. 652-670, 2015.

[639]    I. V. Sucala and A. Sava, "The attitude of Romanian industrial companies towards the market during the transition," Acta Polytechnica Hungarica, vol. 12, no. 5, pp. 81-99, 2015.

[640]    R. Suharoschi, "Ethical challenges of Romanians' consumer preference related to satiety induced by commercial breads," Know Your Food, pp. 264-270, 2015.

[641]    M. Sýs, Z. Říha, V. Matyáš, K. Márton, and A. Suciu, "On the interpretation of results from the NIST statistical test suite," Romanian Journal of Information Science and Technology, vol. 18, no. 1, pp. 18-32, 2015.

[642]    L. Szabo, M. Ruba, D. Fodorean, P. Rafajdus, and P. Dubravka, "Torque smoothing of a fault tolerant segmental stator switched reluctance motor," Communications - Scientific Letters of the University of Zilina, vol. 17, no. 1, pp. 95-101, 2015.

[643]    Z. Szántó, L. Márton, S. György, and T. I. Erdei, "Investigation of robotic swarms with partial team-goal knowledge C3 - INES 2015 - IEEE 19th International Conference on Intelligent Engineering Systems, Proceedings," IEEE 19th International Conference on Intelligent Engineering Systems, INES 2015, pp. 243-248, 3 September 2015 through 5 September 2015 2015.

[644]    C. Szasz and E. H. Dulf, "Fractional Fourier transform: A novel tool for multimodal communication improvement of pervasive mobile robots C3 - SACI 2015 - 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 10th Jubilee IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2015, pp. 153-160, 21 May 2015 through 23 May 2015 2015.

[645]    G. Szenasi, C. Lemnaru, and I. Barbantan, "Concept extraction from medical documents: A contextual approach C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 13-17, 3 September 2015 through 5 September 2015 2015.

[646]    H. Szilágyi, A. Ioani, O. Corbu, and C. Baeră, "Self-compacting concrete with waste powders C3 - International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM," 15th International Multidisciplinary Scientific Geoconference and EXPO, SGEM 2015, vol. 2, no. 6, pp. 273-280, 18 June 2015 through 24 June 2015 2015.

[647]    E. Szopos, I. Saracut, C. Farcas, M. Neag, and M. Topa, "IIR filter synthesis based on Real-Coded Genetic Algorithm for human audiogram emulation C3 - ISSCS 2015 - International Symposium on Signals, Circuits and Systems," 12th International Symposium on Signals, Circuits and Systems, ISSCS 2015, 9 July 2015 through 10 July 2015 2015.

[648]    S. Tălu, D. M. Călugăru, and C. A. Lupascu, "Characterisation of human non-proliferative diabetic retinopathy using the fractal analysis," International Journal of Ophthalmology, vol. 8, no. 4, pp. 770-776, 2015.

[649]    S. Ţălu, S. Stach, B. Klaić, T. Mišić, J. Malina, and A. Čelebić, "Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures," Microscopy Research and Technique, vol. 78, no. 9, pp. 831-839, 2015.

[650]    S. Tǎlu, C. Vlǎduiu, and C. A. Lupaşcu, "Characterization of human retinal vessel arborisation in normal and amblyopic eyes using multifractal analysis," International Journal of Ophthalmology, vol. 8, no. 5, pp. 996-1002, 2015.

[651]    Ş. Ţălu, S. Stach, D. Raoufi, and F. Hosseinpanahi, "Film thickness effect on fractality of tin-doped In<inf>2</inf>O<inf>3</inf> thin films," Electronic Materials Letters, vol. 11, no. 5, pp. 749-757, 2015.

[652]    Ş. Ţălu, S. Stach, V. Sueiras, and N. M. Ziebarth, "Fractal Analysis of AFM Images of the Surface of Bowman’s Membrane of the Human Cornea," Annals of Biomedical Engineering, vol. 43, no. 4, pp. 906-916, 2015.

[653]    Ş. Ţălu, K. Stȩpień, and M. O. Caglayan, "Topographic characterization of unworn contact lenses assessed by atomic force microscopy and wavelet transform," Microscopy Research and Technique, vol. 78, no. 11, pp. 1026-1031, 2015.

[654]    T. Ţălu et al., "Gold nanoparticles embedded in carbon film: Micromorphology analysis," Journal of Industrial and Engineering Chemistry, 2015.

[655]    L. Tamas, R. Frohlich, and Z. Kato, "Relative pose estimation and fusion of omnidirectional and Lidar cameras C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 13th European Conference on Computer Vision, ECCV 2014, vol. 8926, pp. 640-651, 6 September 2014 through 12 September 2014 2015.

[656]    M. O. Tătar, F. Haiduc, and D. Mândru, "Design of a synchro-drive omnidirectional mini-robot," Solid State Phenomena, vol. 220-221, pp. 161-167, 2015.

[657]    A. Taut, M. Daraban, O. Pop, G. Chindris, and R. Fizesan, "Mathematical analysis to control power transfer in resonant power converters C3 - 2015 IEEE 21st International Symposium for Design and Technology in Electronic Packaging, SIITME 2015," 21st IEEE International Symposium for Design and Technology in Electronic Packaging, SIITME 2015, pp. 253-256, 22 October 2015 through 25 October 2015 2015.

[658]    A. Taut, O. Pop, and I. Baciu, "Tool for design and simulation of Flyback converters C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 505-509, 6 May 2015 through 10 May 2015 2015.

[659]    L. R. Tefas, D. M. Muntean, L. Vlase, A. S. Porfire, M. Achim, and I. Tomuță, "Quercetin-loaded liposomes: Formulation optimization through a D-optimal experimental design," Farmacia, vol. 63, no. 1, pp. 26-33, 2015.

[660]    L. R. Tefas, I. Tomuţă, M. Achim, and L. Vlase, "Development and optimization of quercetin-loaded plga nanoparticles by experimental design," Clujul Medical, vol. 88, no. 2, pp. 214-223, 2015.

[661]    B. E. Teleky, M. C. Bălan, and M. Nikolausz, "Timeline of bio-hydrogen production by anaerobic digestion of biomass," Leonardo Electronic Journal of Practices and Technologies, vol. 14, no. 27, pp. 67-80, 2015.

[662]    L. R. Teodorescu, V. Dumitrel, and R. Potolea, "General efficiency analysis for the sparrow programming language C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 512-519, 27 May 2015 through 29 May 2015 2015.

[663]    P. D. Teodosescu, M. Bojan, I. C. Vese, and R. Marschalko, "Research concerning unified electronic lighting devices," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 16, no. 2, pp. 193-200, 2015.

[664]    M. Tertiş et al., "Electrochemical impedance studies on single and multi-walled carbon nanotubes - Polymer nanocomposites for biosensors development," Journal of Nanoscience and Nanotechnology, vol. 15, no. 5, pp. 3385-3393, 2015.

[665]    A. E. Tiuc, O. Nemeş, I. Perhaiţa, H. Vermeşan, T. Gabor, and V. Dan, "Thermal behaviour of polyurethane matrix composite materials," Studia Universitatis Babes-Bolyai Chemia, vol. 60, no. 2, pp. 169-176, 2015.

[666]    A. E. Tiuc, O. Vasile, and H. Vermeşan, "Acoustic performance of composite materials made from textile waste," Romanian Journal of Acoustics and Vibration, vol. 12, no. 2, pp. 111-115, 2015.

[667]    C. C. Todea, "Symmetric cohomology of groups as a Mackey functor," Bulletin of the Belgian Mathematical Society - Simon Stevin, vol. 22, no. 1, pp. 49-58, 2015.

[668]    G. Toderean, O. Buza, and J. Domokos, "Achievements in the field of voice synthesis for Romanian C3 - 2015 International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015," 8th International Conference on Speech Technology and Human-Computer Dialogue, SpeD 2015, 14 October 2015 through 17 October 2015 2015.

[669]    I. Todor et al., "The influence of paroxetine on the pharmacokinetics of atomoxetine and its main metabolite," Clujul Medical, vol. 88, no. 4, pp. 513-520, 2015.

[670]    E. N. Todoran and P. Mitrea, "Semantic investigation of a control-flow subset of BPMN 2.0 C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 483-490, 3 September 2015 through 5 September 2015 2015.

[671]    R. Todoran, D. Todoran, and Z. Szakacs, "Valence band gaps and plasma energies for galena, sphalerite, and chalcopyrite natural minerals using differential optical reflectance spectroscopy," Russian Journal of Physical Chemistry A, vol. 89, no. 13, pp. 2422-2425, 2015.

[672]    G. V. Tofana, P. Berce, and M. S. Popa, "Cutting edge optimization and performance validation for solid carbide twisted drills," Academic Journal of Manufacturing Engineering, vol. 13, no. 4, pp. 61-67, 2015.

[673]    C. Toşa, D. Antov, G. Köllő, H. Rõuk, and M. Rannala, "A methodology for modelling traffic related emissions in suburban areas," Transport, vol. 30, no. 1, pp. 80-87, 2015.

[674]    A. Trif, C. M. Nedezki, and A. Rus, "Experimental research about orthogonal cutting process of aluminium alloy 6060," Academic Journal of Manufacturing Engineering, vol. 13, no. 3, pp. 62-69, 2015.

[675]    L. Tudose, C. Tudose, and F. Rusu, "Systemic approach of bearing arrangement life," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 69-76, 2015.

[676]    S. Ţəlu, N. Patra, and M. Salerno, "Micromorphological characterization of polymer-oxide nanocomposite thin films by atomic force microscopy and fractal geometry analysis," Progress in Organic Coatings, vol. 89, pp. 50-56, 2015.

[677]    S. Ţəlu et al., "Topographic characterization of Cu-Ni NPs @ a-C:H films by AFM and multifractal analysis," Journal of Physical Chemistry B, vol. 119, no. 17, pp. 5662-5670, 2015.

[678]    S. Ţəlu et al., "Multifractal spectra of atomic force microscope images of Cu/Fe nanoparticles based films thickness," Journal of Electroanalytical Chemistry, vol. 749, pp. 31-41, 2015.

[679]    S. Ţəlu, S. Stach, S. Valedbagi, R. Bavadi, S. M. Elahi, and M. Ţəlu, "Multifractal characteristics of titanium nitride thin films," Materials Science- Poland, vol. 33, no. 3, pp. 541-548, 2015.

[680]    S. Ţəlu, S. Stach, S. Valedbagi, S. M. Elahi, and R. Bavadi, "Surface morphology of titanium nitride thin films synthesized by DC reactive magnetron sputtering," Materials Science- Poland, vol. 33, no. 1, pp. 137-143, 2015.

[681]    Ş. Ţəlu et al., "Microstructure and tribological properties of FeNPs@a-C:H films by micromorphology analysis and fractal geometry," Industrial and Engineering Chemistry Research, vol. 54, no. 33, pp. 8212-8218, 2015.

[682]    Ş. Ţəlu, S. Stach, S. F. Alb, and M. Salerno, "Multifractal characterization of a dental restorative composite after air-polishing," Chaos, Solitons and Fractals, vol. 71, pp. 7-13, 2015.

[683]    Ş. Ţəlu et al., "Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach," Applied Surface Science, vol. 330, pp. 20-29, 2015.

[684]    M. L. Unguresan, V. Muresan, M. Abrudean, I. Clitan, T. Colosi, and D. Moga, "PID control of a chemical absorption process C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 104-111, 27 May 2015 through 29 May 2015 2015.

[685]    L. Vacariu, O. Cret, A. Hangan, and C. Bacotiu, "Water parameters monitoring on a cyberwater platform C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 797-802, 27 May 2015 through 29 May 2015 2015.

[686]    L. Vacariu, A. Hangan, O. Cret, and H. Hedesiu, "An INSPIRE-compliant system for pollution detection for somes river C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 803-808, 27 May 2015 through 29 May 2015 2015.

[687]    C. Vaida, D. Pisla, A. Szilaghyi, F. Covaciu, D. Cocorean, and N. Plitea, "The control system of a parallel robot for brachytherapy C3 - Mechanisms and Machine Science," 5th European Conference on Mechanism Science, EUCOMES 2014, vol. 24, pp. 563-571, 16 September 2014 through 19 September 2014 2015.

[688]    C. Vaida, D. Pisla, P. Tucan, B. Gherman, C. Govor, and N. Plitea, "An innovative parallel robotic structure designed for transperineal prostate biopsy C3 - 2015 IFToMM World Congress Proceedings, IFToMM 2015," 14th International Federation for the Promotion of Mechanism and Machine Science World Congress, IFToMM 2015, 25 October 2015 through 30 October 2015 2015.

[689]    M. F. Vaida and K. I. Benta, "Groupware refinements for collaborative teams C3 - 2015 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015 - Proceedings," 14th RoEduNet International Conference - Networking in Education and Research, RoEduNet NER 2015, pp. 56-62, 24 September 2015 through 26 September 2015 2015.

[690]    J. A. Vallés and R. Gələtuş, "Modeling of Yb3+/Er3+-codoped microring resonators," Optical Materials, vol. 41, pp. 126-130, 2015.

[691]    J. A. Vallés and R. Gələtuş, "Requirements for gain/oscillation in Yb3+/Er3+-codoped microring resonators C3 - Proceedings of SPIE - The International Society for Optical Engineering," Optical Components and Materials XII, vol. 9359, 9 February 2015 through 11 February 2015 2015.

[692]    A. Varga, L. Farczádi, L. Vlase, D. P. Primejdie, E. Carasca, and I. Tilea, "Liquid chromatography tandem mass spectrometry simultaneous determination of amlodipine and telmisartan in human plasma for therapeutic drug monitoring," Revista de Chimie, vol. 66, no. 10, pp. 1675-1679, 2015.

[693]    M. Varga, M. A. Badiu, and V. Bota, "Link adaptation algorithm for distributed coded transmissions in cooperative OFDMA systems," Telecommunication Systems, vol. 59, no. 4, pp. 477-489, 2015.

[694]    M. Varga, V. Bota, and H. Hedeşiu, "Hermite polynomials based characterization of the received LLR's distribution in OFDM transmissions C3 - 2015 IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015," 3rd IEEE International Black Sea Conference on Communications and Networking, BlackSeaCom 2015, pp. 9-13, 18 May 2015 through 21 May 2015 2015.

[695]    R. Varga, A. Costea, and S. Nedevschi, "Improved autonomous load handling with stereo cameras C3 - Proceedings - 2015 IEEE 11th International Conference on Intelligent Computer Communication and Processing, ICCP 2015," 11th IEEE International Conference on Intelligent Computer Communication and Processing, ICCP 2015, pp. 251-255, 3 September 2015 through 5 September 2015 2015.

[696]    S. Varga and C. G. Chiorean, "A computer method for advanced pushover analysis of reinforced-concrete frameworks," Civil-Comp Proceedings, vol. 108, 2015.

[697]    S. Varga and C. G. Chiorean, "A computer method for advanced pushover analysis of reinforced-concrete frameworks C3 - Civil-Comp Proceedings," 15th International Conference on Civil, Structural and Environmental Engineering Computing, CIVIL-COMP 2015, 1 September 2015 through 4 September 2015 2015.

[698]    L. Vartic, "Cartographic visual expression, a means of communication and exploration in architecture and art," Geographia Technica, vol. 10, no. 1, pp. 90-95, 2015.

[699]    A. Vatavu, A. D. Costea, and S. Nedevschi, "Modeling and tracking of dynamic obstacles for logistic plants using omnidirectional stereo vision C3 - IEEE International Conference on Intelligent Robots and Systems," IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2015, vol. 2015-December, pp. 3552-3558, 28 September 2015 through 2 October 2015 2015.

[700]    A. Vatavu, R. Danescu, and S. Nedevschi, "Stereovision-based multiple object tracking in traffic scenarios using free-form obstacle delimiters and particle filters," IEEE Transactions on Intelligent Transportation Systems, vol. 16, no. 1, pp. 498-511, 2015.

[701]    L. Vegh and L. Miclea, "A simple scheme for security and access control in cyber-physical systems C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 294-299, 27 May 2015 through 29 May 2015 2015.

[702]    L. Vegh and L. Miclea, "Access control in cyber-physical systems using steganography and digital signatures C3 - Proceedings of the IEEE International Conference on Industrial Technology," 2015 IEEE International Conference on Industrial Technology, ICIT 2015, vol. 2015-June, no. June, pp. 1504-1509, 17 March 2015 through 19 March 2015 2015.

[703]    C. Vicas and S. Nedevschi, "Detecting Curvilinear Features Using Structure Tensors," IEEE Transactions on Image Processing, vol. 24, no. 11, pp. 3874-3887, 2015.

[704]    C. Vilau, N. Balc, and D. Leordean, "Design and dynamic analysis of gripper for the KUKA KR6 robot," Academic Journal of Manufacturing Engineering, vol. 13, no. 2, pp. 12-17, 2015.

[705]    C. Vilau, N. Balc, D. Leordean, and C. Cosma, "Static analysis to redesign the gripper, using CREO parametric software tools," Academic Journal of Manufacturing Engineering, vol. 13, no. 1, pp. 77-82, 2015.

[706]    J. R. Villar, C. Chira, J. Sedano, S. González, and J. M. Trejo, "A hybrid intelligent recognition system for the early detection of strokes," Integrated Computer-Aided Engineering, vol. 22, no. 3, pp. 215-227, 2015.

[707]    J. R. Villar, S. González, J. Sedano, C. Chira, and J. M. Trejo-Gabriel-Galan, "Improving human activity recognition and its application in early stroke diagnosis," International Journal of Neural Systems, vol. 25, no. 4, 2015.

[708]    A. C. Viorel, L. Strete, and I. A. Viorel, "Transverse flux generators a solution for stand-alone wind mill C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[709]    A. C. Viorel and I. A. Viorel, "A discussion on variants of stand-alone electric powerplant equipped with transverse flux generators C3 - 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015," 2015 13th International Conference on Engineering of Modern Electric Systems, EMES 2015, 11 June 2015 through 12 June 2015 2015.

[710]    T. Vlad and D. Piticǎ, "Implementing some fundamental electronics concepts using project based learning in educational platforms C3 - Proceedings of the International Spring Seminar on Electronics Technology," 38th International Spring Seminar on Electronics Technology, ISSE 2015, vol. 2015-September, pp. 510-515, 6 May 2015 through 10 May 2015 2015.

[711]    V. Vladareanu, C. Boscoianu, R. I. Munteanu, H. Yu, and L. Vladareanu, "Dynamic control of a walking robot using the versatile intelligent portable robot platform C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 38-45, 27 May 2015 through 29 May 2015 2015.

[712]    V. Vladareanu, R. I. Munteanu, A. Mumtaz, F. Smarandache, and L. Vladareanu, "The Optimization of Intelligent Control Interfaces Using Versatile Intelligent Portable Robot Platform C3 - Procedia Computer Science," International Conference on Communications, Management, and Information Technology, ICCMIT 2015, vol. 65, pp. 225-232, 20 April 2015 through 22 April 2015 2015.

[713]    L. Vlase, B. Kiss, C. Bocsan, S. Negrutiu, I. H. Vlad, and A. Buzoianu, "A high-throughput HPLC assay for levosimendan in human plasma with ESI-MS/MS detection," Farmacia, vol. 63, no. 6, pp. 821-827, 2015.

[714]    R. C. Voicu, M. Pustan, C. Birleanu, A. Baracu, and R. Müller, "Mechanical and tribological properties of thin films under changes of temperature conditions," Surface and Coatings Technology, vol. 271, pp. 48-56, 2015.

[715]    T. Wensveen, L. Busoniu, and R. Babuka, "Real-time optimistic planning with action sequences C3 - Proceedings - 2015 20th International Conference on Control Systems and Computer Science, CSCS 2015," 20th International Conference on Control Systems and Computer Science, CSCS 2015, pp. 923-930, 27 May 2015 through 29 May 2015 2015.

[716]    S. Wiedemann and A. Dziechciarz, "Comparative evaluation of DTC strategies for the synchronous reluctance machine C3 - 2015 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015," 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015, 31 March 2015 through 2 April 2015 2015.

[717]    X. Xu, H. He, D. Zhao, S. Sun, L. Busoniu, and S. X. Yang, "Machine Learning with Applications to Autonomous Systems," Mathematical Problems in Engineering, vol. 2015, 2015.

[718]    M. V. Zaharia, A. A. Laczko, A. A. Pop, M. M. Radulescu, and F. Gillon, "Optimal commutation angles of a switched reluctance motor/generator C3 - 2015 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015," 10th International Conference on Ecological Vehicles and Renewable Energies, EVER 2015, 31 March 2015 through 2 April 2015 2015.

[719]    S. Zaporojan, V. Moraru, and A. Groza, "An Approach to Schedule Production using the Reservation Tables C3 - Advances in Intelligent Systems and Computing," 23rd International Conference on Systems Engineering, ICSEng 2014, vol. 1089, pp. 615-620, 19 August 2014 through 21 August 2014 2015.

[720]    A. Zene, C. T. Chirap, O. Creţ, and L. Vəcariu, "Efficient hardware implementation of snapshotting algorithms for NoC applications," Romanian Journal of Information Science and Technology, vol. 18, no. 1, pp. 79-92, 2015.