SCOPUS Publications 2012

[1]    L. C. Abodi, J. A. Derose, S. Van Damme, A. Demeter, T. Suter, and J. Deconinck, "Modeling localized aluminum alloy corrosion in chloride solutions under non-equilibrium conditions: Steps toward understanding pitting initiation," Electrochimica Acta, vol. 63, pp. 169-178, 2012.

[2]    Ö. Acar, V. Berinde, and I. Altun, "Fixed point theorems for Ćirić-type strong almost contractions on partial metric spaces," Journal of Fixed Point Theory and Applications, vol. 12, no. 1-2, pp. 247-259, 2012.

[3]    R. Addaci et al., "Design of multi-antenna diversity system dedicated to sensor interrogation in multi-path environments C3 - 2012 15th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2012," 2012 15th International Symposium on Antenna Technology and Applied Electromagnetics, ANTEM 2012, 25 June 2012 through 28 June 2012 2012.

[4]    L. Alboaie, M. F. Vaida, and D. Pojar, "Alternative methodologies for automated grouping in education and research C3 - ACM International Conference Proceeding Series," International Information Technology Conference, CUBE 2012, pp. 508-513, 3 September 2012 through 5 September 2012 2012.

[5]    C. Albu, S. Van Damme, L. C. Abodi, A. S. Demeter, J. Deconinck, and V. Topa, "Influence of the applied potential and pH on the steady-state behavior of the iron oxide," Electrochimica Acta, vol. 67, pp. 119-126, 2012.

[6]    A. I. Alexan, A. R. Osan, and S. Oniga, "Personal assistant robot C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 69-72, 25 October 2012 through 28 October 2012 2012.

[7]    M. Alonso, H. Amarís, and M. Chindris, "A multiobjective Var/Volt management system in smartgrids C3 - Energy Procedia," 2011 2nd International Conference on Advances in Energy Engineering, ICAEE 2011, vol. 14, pp. 1490-1495, 27 December 2011 through 28 December 2011 2012.

[8]    F. Altomare and I. Raşa, "Lipschitz contractions, unique ergodicity and asymptotics of markov semigroups," Bolletino dell Unione Matematica Italiana, vol. 5, no. 1, pp. 1-17, 2012.

[9]    R. Ameur-Boulifa, R. Halalai, L. Henrio, and E. Madelaine, "Verifying safety of fault-tolerant distributed components C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Symposium on Formal Aspects of Component Software, FACS 2011, vol. 7253 LNCS, pp. 278-295, 14 September 2011 through 16 September 2011 2012.

[10]    M. Ancǎu, "On solving flowshop scheduling problems," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 13, no. 1, pp. 71-79, 2012.

[11]    C. I. Andronache, "The local structure and magnetic interactions between Fe 3+ and V 4+ ions in lithium-phosphate glasses," Materials Chemistry and Physics, vol. 136, no. 2-3, pp. 281-285, 2012.

[12]    A. F. Antone and R. Arsinte, "Modeling the channel capacity for different generations of in-home data transmission systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 261-265, 24 May 2012 through 27 May 2012 2012.

[13]    O. S. Antonescu and C. Munteanu, "Numerical analysis of different pulse propagation on nonuniform transmission lines C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 513-518, 25 October 2012 through 27 October 2012 2012.

[14]    A. Antoniu, A. Smaili, I. V. Vacar, M. C. Plopeanu, and L. Dascalescu, "Sinusoidal and triangular high-voltage neutralizers for accelerated discharge of nonwoven fibrous dielectrics," IEEE Transactions on Industry Applications, vol. 48, no. 3, pp. 857-863, 2012.

[15]    R. D. Apan, "The legal framework for consumer credit in Romania: Facts and prospects," Consumer Credit, Debt and Investment in Europe, pp. 127-141, 2012.

[16]    G. Ardelean, "Proving the convergence of the iterative methods by using symbolic computation in maple," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 1-8, 2012.

[17]    P. Ardelean et al., "The study of the photosensitive materials used in solar-hydrogen energy by a versatile photoelectrochemical cell C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 117-120, 29 September 2011 through 1 October 2011 2012.

[18]    M. Arghir, M. Rus, S. Macocescu, and D. Borza, "Optical method used for the mechanical vibrations action on the human working hands C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 475-480, 24 May 2012 through 27 May 2012 2012.

[19]    C. Avram, A. Aştilean, and D. Radu, "Vehicle navigation system C3 - Proceedings - 26th European Conference on Modelling and Simulation, ECMS 2012," 26th European Conference on Modelling and Simulation, ECMS 2012, 29 May 2012 through 1 June 2012 2012.

[20]    I. H. Baciu and S. Lungu, "Resonance in power converters circuits C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 183-187, 25 October 2012 through 28 October 2012 2012.

[21]    V. Bacu and D. Gorgan, "Grid application oriented computational resource allocation strategy C3 - Proceedings of the 2012 International Conference on High Performance Computing and Simulation, HPCS 2012," 2012 10th Annual International Conference on High Performance Computing and Simulation, HPCS 2012, pp. 581-587, 2 July 2012 through 6 July 2012 2012.

[22]    V. Bacu et al., "Grid based services and tools for hydrological model processing and visualization C3 - Proceedings - 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011," 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011, pp. 291-298, 26 September 2011 through 29 September 2011 2012.

[23]    G. Badescu et al., "The use of GIS is shown in taking decisions regarding on environmental engineering projects C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 3, pp. 425-432, 17 June 2012 through 23 June 2012 2012.

[24]    G. Badescu, O. Stefan, M. Darja, and R. Badescu, "Ortofotomaps use and system gnss position determination rompos project management mine closure in maramureş county C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 2, pp. 879-886, 17 June 2012 through 23 June 2012 2012.

[25]    G. Badescu, O. Stefan, M. Darja, M. Ortelecan, and R. Badescu, "Aspects regarding the use of GNSS technology in local networks in Romania and comparative study with the use of the Romanian position determination system (ROMPOS) C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 2, pp. 685-692, 17 June 2012 through 23 June 2012 2012.

[26]    M. A. Badiu, G. E. Kirkelund, C. N. Manchón, E. Riegler, and B. H. Fleury, "Message-passing algorithms for channel estimation and decoding using approximate inference C3 - IEEE International Symposium on Information Theory - Proceedings," 2012 IEEE International Symposium on Information Theory, ISIT 2012, pp. 2376-2380, 1 July 2012 through 6 July 2012 2012.

[27]    M. A. Badiu, C. N. Manchón, V. Bota, and B. H. Fleury, "Distributed iterative processing for interference channels with receiver cooperation C3 - International Symposium on Turbo Codes and Iterative Information Processing, ISTC," 2012 7th International Symposium on Turbo Codes and Iterative Information Processing, ISTC 2012, pp. 140-144, 27 August 2012 through 31 August 2012 2012.

[28]    V. Baja, D. Gorgan, and T. Beu, "Comparison between parallel and distributed molecular dynamics simulations of Lennard-Jones systems C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 349-354, 30 August 2012 through 1 September 2012 2012.

[29]    C. Bal, "The Frictional effects in serial harmonic circuit," International Journal of Multiphysics, vol. 6, no. 1, pp. 1-6, 2012.

[30]    D. Balan, "Preoccupation about the intelligent management of electricity to smart appliances consumers, in the future smart grids," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 303-308, 2012.

[31]    H. Balan, M. I. Buzdugan, A. Botezan, R. A. Munteanu, P. Karaissas, and C. Psomopoulos, "Testing wind variable speed driving systems for conducted interferences C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 565-570, 20 June 2012 through 22 June 2012 2012.

[32]    H. Balan, M. I. Buzdugan, C. Chiorean, A. Iacob, and P. Karaisas, "A passive EMI filter for the reduction of active filter generated network distortions C3 - 2012 International Conference on Applied and Theoretical Electricity, ICATE 2012 - Proceedings," 2012 International Conference on Applied and Theoretical Electricity, ICATE 2012, 25 October 2012 through 27 October 2012 2012.

[33]    H. Balan, M. I. Buzdugan, C. Chiorean, and P. Karaissas, "Reduction of the distortion current factor of the current drawn by the electromagnetic vibrators supplied at variable frequency C3 - Materials Science Forum," 7th Japanese-Mediterranean and Central European Workshop on Applied Electromagnetic Engineering for Magnetic, Superconducting and Nano Materials, JAPMED'7, vol. 721, pp. 275-280, 6 July 2011 through 9 July 2011 2012.

[34]    H. Balan, E. Stefan, T. Vaida, and P. Karaisas, "Fault current limiter in d.c. networks using thyristor by-pass circuits C3 - 2012 International Conference on Applied and Theoretical Electricity, ICATE 2012 - Proceedings," 2012 International Conference on Applied and Theoretical Electricity, ICATE 2012, 25 October 2012 through 27 October 2012 2012.

[35]    M. Bǎlcǎu, A. Pleşa, and D. Opruţa, "Contributions to the study of dynamic absorbers, a case study," Acta Polytechnica, vol. 52, no. 4, pp. 12-15, 2012.

[36]    D. Banabic and M. Sester, "Influence of material models on the accuracy of the sheet forming simulation," Materials and Manufacturing Processes, vol. 27, no. 3, pp. 273-277, 2012.

[37]    V. Bande, D. Pitica, and I. Ciascai, "Multi - capacitor sensor algorithm for water level measurement C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 286-291, 9 May 2012 through 13 May 2012 2012.

[38]    V. Bande, S. Pop, I. Ciascai, and D. Pitica, "Real-time sensor acquisition interfacing using MatLAB C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 189-192, 25 October 2012 through 28 October 2012 2012.

[39]    D. Banyai and L. Marcu, "A flexible adjustment and control system for hydraulic machines," Acta Polytechnica, vol. 52, no. 4, pp. 16-20, 2012.

[40]    C. Barbu and L. I. Piscoran, "Andrica-iwata's inequality in hyperbolic triangle," Mathematical Inequalities and Applications, vol. 15, no. 3, pp. 631-637, 2012.

[41]    C. Barbu and L. I. Pişcoran, "Some hyperbolic concurrency results in the poincaré disc," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 9-15, 2012.

[42]    A. Basarab, R. Abbal, M. C. Ureche, and D. Kouame, "MR-ultrasound imaging registration using 2D spatial phase images C3 - IEEE International Ultrasonics Symposium, IUS," 2012 IEEE International Ultrasonics Symposium, IUS 2012, 7 October 2012 through 10 October 2012 2012.

[43]    M. N. Batin and V. Popescu, "The influence of deposition time on optical properties of iron oxide films grown on glass substrate by chemical bath deposition," Optoelectronics and Advanced Materials, Rapid Communications, vol. 6, no. 7-8, pp. 727-729, 2012.

[44]    B. Belean, M. Borda, B. Le Gal, and R. Terebes, "FPGA based system for automatic cDNA microarray image processing," Computerized Medical Imaging and Graphics, vol. 36, no. 5, pp. 419-429, 2012.

[45]    D. Benedec, L. Vlase, I. Oniga, A. Toiu, M. Tǎmaş, and B. Tiperciuc, "Isoflavonoids from Glycyrrhiza sp. and Ononis spinosa," Farmacia, vol. 60, no. 5, pp. 615-620, 2012.

[46]    I. Benţia, L. Szabó, and M. Ruba, "On a rotary-linear switched reluctance motor C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 507-510, 20 June 2012 through 22 June 2012 2012.

[47]    I. M. Berar Sur, V. Micle, S. Avram, Ş. Marin, and V. Oros, "Bioleaching of some heavy metals from polluted soils," Environmental Engineering and Management Journal, vol. 11, no. 8, pp. 1389-1393, 2012.

[48]    P. Bere, P. Berce, and O. Nemes, "Phenomenological fracture model for biaxial fibre reinforced composites," Composites Part B: Engineering, vol. 43, no. 5, pp. 2237-2243, 2012.

[49]    V. Berinde, "Approximating fixed points of implicit almost contractions," Hacettepe Journal of Mathematics and Statistics, vol. 41, no. 1, pp. 93-102, 2012.

[50]    V. Berinde, "Coupled coincidence point theorems for mixed monotone nonlinear operators," Computers and Mathematics with Applications, vol. 64, no. 6, pp. 1770-1777, 2012.

[51]    V. Berinde, "Coupled fixed point theorems for φ-contractive mixed monotone mappings in partially ordered metric spaces," Nonlinear Analysis, Theory, Methods and Applications, vol. 75, no. 6, pp. 3218-3228, 2012.

[52]    V. Berinde and M. Pǎcurar, "Coupled fixed point theorems for generalized symmetric Meir-Keeler contractions in ordered metric spaces," Fixed Point Theory and Applications, vol. 2012, 2012.

[53]    V. Berinde and F. Vetro, "Common fixed points of mappings satisfying implicit contractive conditions," Fixed Point Theory and Applications, vol. 2012, 2012.

[54]    B. Betea, P. Dobra, and M. Trusca, "Simplified mathematical model of the bearings with defects C3 - 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012 - Joint Conference Proceedings," 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012, 12 October 2012 through 14 October 2012 2012.

[55]    B. Betea, P. Dobra, M. Trusca, and L. Tomesc, "Simulation model of the bearings with defects C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 249-254, 24 May 2012 through 27 May 2012 2012.

[56]    B. Betea, L. Tomesc, P. Dobra, and M. Trusca, "Spectrum analyzer instrument based on OMAP3530 C3 - EDERC 2012 - Proceedings of the 5th European DSP in Education and Research Conference," 5th European DSP in Education and Research Conference, EDERC 2012, pp. 257-260, 13 September 2012 through 14 September 2013 2012.

[57]    C. L. Big, R. Lǎcǎtuşu, and F. Damian, "Heavy metals in soil-plant system around Baia Mare city, Romania," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 3, pp. 219-230, 2012.

[58]    G. Bigi, A. Capǎtǎ, and G. Kassay, "Existence results for strong vector equilibrium problems and their applications," Optimization, vol. 61, no. 5, pp. 567-583, 2012.

[59]    P. J. Bills et al., "Volumetric wear assessment of retrieved metal-on-metal hip prostheses and the impact of measurement uncertainty," Wear, vol. 274-275, pp. 212-219, 2012.

[60]    L. Biro, V. Bacu, D. Rodila, L. Barabas, and D. Gorgan, "Grid to cloud migration of scientific applications, using dynamically created cloud clusters C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 335-340, 30 August 2012 through 1 September 2012 2012.

[61]    C. Bischin, Ş. Ţǎlu, R. Silaghi-Dumitrescu, M. Ţǎlu, S. Giovanzana, and C. A. Lupaşcu, "Computerized morphometric assessment of the human red blood cells treated with cisplatin," Annals of the Romanian Society for Cell Biology, vol. 17, no. 2, pp. 105-110, 2012.

[62]    F. I. Bob, "Embedded solution for universal acoustic source distance localization using three microphones C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 359-362, 15 November 2012 through 16 November 2012 2012.

[63]    G. D. Boca, "Innovation and employment in economic cycle management C3 - Innovation Vision 2020: Sustainable growth, Entrepreneurship, and Economic Development - Proceedings of the 19th International Business Information Management Association Conference," 19th IBIMA Conference on Innovation Vision 2020: Sustainable Growth, Entrepreneurship and Economic Development, vol. 4, pp. 1848-1856, 12 November 2012 through 13 November 2012 2012.

[64]    G. D. Boca, "Platform management vision and innovation of design process C3 - Innovation Vision 2020: Sustainable growth, Entrepreneurship, and Economic Development - Proceedings of the 19th International Business Information Management Association Conference," 19th IBIMA Conference on Innovation Vision 2020: Sustainable Growth, Entrepreneurship and Economic Development, vol. 2, pp. 716-724, 12 November 2012 through 13 November 2012 2012.

[65]    G. D. Boca, "Translating product life cycle knowledge into the improvement product matrix C3 - Innovation and Sustainable Competitive Advantage: From Regional Development to World Economies - Proceedings of the 18th International Business Information Management Association Conference," 18th IBIMA Conference on Innovation and Sustainable Competitive Advantage: From Regional Development to World Economies, vol. 2, pp. 1006-1016, 9 May 2012 through 10 May 2012 2012.

[66]    G. D. Boca and H. Gokkaya, "A strategic matrix for knowledge product development C3 - Innovation and Sustainable Competitive Advantage: From Regional Development to World Economies - Proceedings of the 18th International Business Information Management Association Conference," 18th IBIMA Conference on Innovation and Sustainable Competitive Advantage: From Regional Development to World Economies, vol. 2, pp. 996-1005, 9 May 2012 through 10 May 2012 2012.

[67]    M. L. Boca, B. Croitoru, and M. Abrudean, "Modeling approach of 13C isotope separation column for mission critical situations detection C3 - Proceedings of SPIE - The International Society for Optical Engineering," 6th International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM-N 2012, vol. 8411, 23 August 2012 through 26 August 2012 2012.

[68]    V. Bocǎneţ, L. Vaida, and C. Chiriţǎ, "Experimental results from testing a combined mechanohydraulic drive," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 457-460, 2012.

[69]    I. A. Bocsan et al., "Shape-memory polymers filled with SiO 2 nanoparticles," Materiali in Tehnologije, vol. 46, no. 3, pp. 243-246, 2012.

[70]    C. Bogǎţan et al., "On the way of growing YBa2Cu3O7-x superconducting thin films from a fluorin-free water based propionate precursor solution," Studia Universitatis Babes-Bolyai Chemia, no. 4, pp. 13-22, 2012.

[71]    F. Bojor, "Fixed point theorems for Reich type contractions on metric spaces with a graph," Nonlinear Analysis, Theory, Methods and Applications, vol. 75, no. 9, pp. 3895-3901, 2012.

[72]    F. Bojor, "Fixed points of bianchini mappings in metric spaces endowed with a graph," Carpathian Journal of Mathematics, vol. 28, no. 2, pp. 207-214, 2012.

[73]    F. Bojor, "Note on the stability of first order linear differential equations," Opuscula Mathematica, vol. 32, no. 1, pp. 67-74, 2012.

[74]    M. Borcut, "Tripled coincidence theorems for contractive type mappings in partially ordered metric spaces," Applied Mathematics and Computation, vol. 218, no. 14, pp. 7339-7346, 2012.

[75]    M. Borcut, "Tripled fixed point theorems for monotone mappings in partially ordered metric spaces," Carpathian Journal of Mathematics, vol. 28, no. 2, pp. 215-222, 2012.

[76]    M. Borcut and V. Berinde, "Tripled coincidence theorems for contractive type mappings in partially ordered metric spaces," Applied Mathematics and Computation, vol. 218, no. 10, pp. 5929-5936, 2012.

[77]    D. Bordencea, H. Valean, S. Folea, A. Dobircau, and R. Banut, "Agent based patient scheduling system C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 72-76, 3 July 2012 through 4 July 2012 2012.

[78]    A. Borlea, T. Rusu, and O. Vasile, "Investigation composite materials for its sound absorption properties," Romanian Journal of Acoustics and Vibration, vol. 9, no. 2, pp. 123-126, 2012.

[79]    A. Borlea, T. Rusu, and O. Vasile, "Using particles of recycled rubber when making some soundproofing materials," Materiale Plastice, vol. 49, no. 4, pp. 275-278, 2012.

[80]    A. I. Botean and M. Simion, "Study of state of stresses using photoelastcity in case of an industrial robot SCARA C3 - 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012," 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012, pp. 222-227, 30 May 2012 through 2 June 2012 2012.

[81]    A. I. Botean, I. Takacs, and M. Hardau, "The study of stress distribution for the femoral bone in bipodal support - 3D modeling C3 - 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012," 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012, pp. 228-231, 30 May 2012 through 2 June 2012 2012.

[82]    R. Both, E. H. Dulf, and C. Festila, "Robust control of a catalytic 2 ethyl-hexenal hydrogenation reactor," Chemical Engineering Science, vol. 74, pp. 300-309, 2012.

[83]    R. Both, E. H. Dulf, A. O. Neaga, and C. P. Darab, "Robust control of the 15N isotope separation column C3 - SACI 2012 - 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2012, pp. 19-22, 24 May 2012 through 26 May 2012 2012.

[84]    E. Breaz, F. Gao, B. Blunier, and R. Tirnovan, "Mathematical modeling of proton exchange membrane fuel cell with integrated humidifier for mobile applications C3 - 2012 IEEE Transportation Electrification Conference and Expo, ITEC 2012," 2012 IEEE Transportation Electrification Conference and Expo, ITEC 2012, 18 June 2012 through 20 June 2012 2012.

[85]    E. Breaz, F. Gao, B. Blunier, R. Tirnovan, and A. Miraoui, "Mathematical modeling of PEMFC stack for real time simulation C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 553-558, 24 May 2012 through 27 May 2012 2012.

[86]    S. Breban, F. Mollet, C. Saudemont, B. Robyns, and M. M. Radulescu, "Embedded electric power system with fuzzy-logic supervision for vehicular applications C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1575-1579, 24 May 2012 through 26 May 2012 2012.

[87]    J. BrzdȩK, D. Popa, and X. Bing, "A note on stability of the linear functional equations of higher order and fixed points of an operator," Fixed Point Theory, vol. 13, no. 2, pp. 347-356, 2012.

[88]    J. Brzdęk, D. Popa, and B. Xu, "Remarks on stability of the linear functional equation in single variable," Springer Optimization and Its Applications, vol. 68, pp. 91-119, 2012.

[89]    C. Bud, "On annotation or⋯ on salt in literature," Revista Transilvania, no. 10, pp. 15-17, 2012.

[90]    I. Bud, D. Gusat, S. Duma, and V. Arad, "Mining in romania and its environment limitation - With a study case of maramures county C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 1, pp. 661-666, 17 June 2012 through 23 June 2012 2012.

[91]    O. Buiga and C. O. Popa, "Optimal mass design of a single-stage helical gear unit with genetic algorithms," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 13, no. 3, pp. 243-250, 2012.

[92]    L. Bükkösi, G. Y. Thalmaier, C. Codrean, P. Pǎşcuţǎ, and I. Vida-Simiti, "Obtaining and characterization of Ni-Zr type amorphous tapes," Optoelectronics and Advanced Materials, Rapid Communications, vol. 6, no. 9-10, pp. 814-817, 2012.

[93]    O. Bumbariu, "A convergence result for the B-algorithm," Applied Mathematical Sciences, vol. 6, no. 77-80, pp. 3821-3826, 2012.

[94]    O. Bumbariu, "A new Aitken type method for accelerating iterative sequences," Applied Mathematics and Computation, vol. 219, no. 1, pp. 78-82, 2012.

[95]    O. Bumbariu, "An acceleration technique for slowly convergent fixed point iterative methods," Miskolc Mathematical Notes, vol. 13, no. 2, pp. 271-281, 2012.

[96]    O. Bumbariu and V. Berinde, "An Empirical study of the ∈-algorithm for accelerating numerical sequences," Applied Mathematical Sciences, vol. 6, no. 21-24, pp. 1181-1190, 2012.

[97]    A. But and A. Bertoti, "Testing the preserving activity of nanostructured Ag-Tio 2 during the deposition of summer sausage and boneless chicken breast," Carpathian Journal of Food Science and Technology, vol. 4, no. 1, pp. 9-16, 2012.

[98]    A. L. Butiuc-Keul, L. Vlase, and C. Crǎciunaş, "Clonal propagation and production of cichoric acid in three species of Echinaceae," In Vitro Cellular and Developmental Biology - Plant, vol. 48, no. 2, pp. 249-258, 2012.

[99]    O. A. Buzura, "Filtering algorithms development using spline approximation operators C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 834-839, 25 October 2012 through 27 October 2012 2012.

[100]    A. Cabellos-Aparicio, D. M. Cioran, P. Barlet-Ros, J. Domingo-Pascual, and V. Dobrota, "FHA: A flexible and distributed Home Agent architecture for Mobile-IP based networks," Information Sciences, vol. 211, pp. 68-80, 2012.

[101]    A. Calleja et al., "Growth of epitaxial CeO 2 buffer layers by polymer assisted deposition C3 - Materials Research Society Symposium Proceedings," 2012 MRS Spring Meeting, vol. 1449, pp. 31-39, 9 April 2012 through 13 April 2012 2012.

[102]    I. Campanu, T. Salajan, R. Onet, and M. Neag, "Comparative analysis of four second-order OA-RC polyphase filters for an ISM Low-IF receiver C3 - Proceedings of the International Semiconductor Conference, CAS," 35th International Semiconductor Conference, CAS 2012, vol. 2, pp. 385-388, 15 October 2012 through 17 October 2012 2012.

[103]    E. Câmpean, A. Pîslǎ, and Ş. Pap, "Characteristics of neural network solutions within the parallel kinematic systems control," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 309-314, 2012.

[104]    R. F. Campean, I. Petean, M. BǎrǎIan, A. G. Hosu-Prack, D. Ristoiu, and G. Arghir, "Mineral particulate matter from the St. Ana Lake sand related to the water suspensions," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 2, pp. 57-66, 2012.

[105]    A. Capǎtǎ, "Optimality Conditions for Extended Ky Fan Inequality with Cone and Affine Constraints and Their Applications," Journal of Optimization Theory and Applications, vol. 152, no. 3, pp. 661-674, 2012.

[106]    D. Cárdenas-Morales, P. Garrancho, and I. Raşa, "Asymptotic formulae via a Korovkin-type result," Abstract and Applied Analysis, vol. 2012, 2012.

[107]    B. M. Cardoş, "A powerful external factor that may influence negatively a company's continuous performance and quality improvement," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 93-96, 2012.

[108]    B. M. Cardoş and M. E. Muţ, "A proposed model of continuous quality improvement for ISO accreditation services in Romania," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 97-100, 2012.

[109]    R. Carpa, A. Butiuc-Keul, I. Lupan, L. Barbu-Tudoran, V. Muntean, and C. Dobrotǎ, "Poly-β-hydroxybutyrate accumulation in bacterial consortia from different environments," Canadian Journal of Microbiology, vol. 58, no. 5, pp. 660-667, 2012.

[110]    D. Catana and G. A. Catana, "Continuity and change in Romanian societal culture dimensions," Journal for East European Management Studies, vol. 17, no. 2, pp. 226-248, 2012.

[111]    A. Ceclan, V. Tapa, D. D. Micu, and A. Andreotti, "Return stroke current remote sensing, based on solving an inverse ill-posed problem C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 717-722, 25 October 2012 through 27 October 2012 2012.

[112]    A. Ceclan, V. Topa, A. Andreotti, and D. D. Micu, "Regularization of ill-posed return stroke current identification problem C3 - 2012 31st International Conference on Lightning Protection, ICLP 2012," 2012 31st International Conference on Lightning Protection, ICLP 2012, 2 September 2012 through 7 September 2012 2012.

[113]    A. Ceclan, V. Ţopa, D. D. Micu, L. Czumbil, A. Şimon, and O. Creţ, "Improved framework for Monte Carlo numerical evaluations in field interference problems," International Journal of Applied Electromagnetics and Mechanics, vol. 39, no. 1-4, pp. 693-698, 2012.

[114]    V. Ceclan, S. Grozav, and N. Balc, "Quality of bending aluminium tubes at 45°," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 315-318, 2012.

[115]    E. Ceuca, A. Tulbure, and S. Plesa, "The battery management in green energy production C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 350-354, 9 May 2012 through 13 May 2012 2012.

[116]    V. Chertes, R. L. Orban, I. Vida-Simiti, and D. Salomie, "Effects of severe plastic deformation on microstructure and mechanical properties of phosphorous sintered steel parts," Journal of Optoelectronics and Advanced Materials, vol. 14, no. 5-6, pp. 551-556, 2012.

[117]    B. Chetran, E. Szelitzky, A. M. Aluţei, and D. Mândru, "Movement control of active/passive exercisers," Journal of Vibroengineering, vol. 14, no. 1, pp. 7-15, 2012.

[118]    V. R. Chifu, C. B. Pop, I. Salomie, I. Balla, and R. Paven, "Hybrid particle swarm optimization method for process mining C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 273-279, 30 August 2012 through 1 September 2012 2012.

[119]    M. Chindris and A. Sudria-Andreu, "Lighting," Electrical Energy Efficiency: Technologies and Applications, pp. 229-262, 2012.

[120]    M. Chindris and A. Sumper, "Industrial Heating Processes," Electrical Energy Efficiency: Technologies and Applications, pp. 295-334, 2012.

[121]    V. Chindriş, R. Terec, M. Ruba, and L. Szabó, "Software environment for online simulation of switched reluctance machines," Studies in Computational Intelligence, vol. 416, pp. 85-109, 2012.

[122]    C. G. Chiorean, G. Tarta, I. Marchis, and M. Buru, "Computer-based nonlinear analysis for the seismic performance assessment of three-dimensional steel frameworks C3 - Civil-Comp Proceedings," 11th International Conference on Computational Structures Technology, CST 2012, vol. 99, 4 September 2012 through 7 September 2012 2012.

[123]    A. Chioreanu, S. Brad, and C. Ioanes, "Vision on intelligent management of industrial robotics systems C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 368-377, 6 June 2012 through 8 June 2012 2012.

[124]    L. T. Chira, J. M. Girault, and C. Rusu, "Into the ultrasound deconvolution using CLEAN algorithm - Statistical analysis of scatters detection C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 299-302, 15 November 2012 through 16 November 2012 2012.

[125]    D. S. Cimpean and I. Pop, "Fully developed mixed convection flow of a nanofluid through an inclined channel filled with a porous medium," International Journal of Heat and Mass Transfer, vol. 55, no. 4, pp. 907-914, 2012.

[126]    H. Cioban, L. Butnar, and C. Ghita, "Studies regarding molding process for industrial rubber products," Materiale Plastice, vol. 49, no. 3, pp. 158-162, 2012.

[127]    C. Ciobanica, F. Tudic, and R. R. Slavescu, "Designing an information gathering application for a personalized travel recommender system C3 - Proceedings of the 2012 IEEE/WIC/ACM International Conference on Web Intelligence and Intelligent Agent Technology Workshops, WI-IAT 2012," 2012 IEEE/WIC/ACM International Conference on Web Intelligence and Intelligent Agent Technology Workshops, WI-IAT 2012, pp. 102-106, 4 December 2012 through 7 December 2012 2012.

[128]    G. Ciobanu and E. N. Todoran, "Metric denotational semantics for parallel rewriting of multisets C3 - Proceedings - 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011," 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011, pp. 276-283, 26 September 2011 through 29 September 2011 2012.

[129]    G. Ciobanu and E. N. Todoran, "Relating two metric semantics for parallel rewriting of multisets C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 273-280, 26 September 2012 through 29 September 2012 2012.

[130]    T. Ciobotaru, D. Frunzeti, I. Rus, and L. Jäntschi, "The working regime analysis of a track-type tractor," International Journal of Heavy Vehicle Systems, vol. 19, no. 2, pp. 172-187, 2012.

[131]    I. Ciocan, C. Farcas, D. Petreus, N. Palaghita, and A. Grama, "Over-current and short-circuit protection for IGBT's used in plasma generator inverter C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 341-345, 25 October 2012 through 28 October 2012 2012.

[132]    R. Ciocan, "Performance management methodology for construction process optimization," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 101-104, 2012.

[133]    N. Cioica, R. Fechete, O. Cozar, and C. Cota, "Investigate the effect of some plasticizers on the macrostructure of corn starch used to obtain biodegradable packaging," INMATEH - Agricultural Engineering, vol. 36, no. 1, pp. 69-70, 2012.

[134]    V. Cionca, T. Newe, and V. T. Dǎdârlat, "Configuration tool for a wireless sensor network integrated security framework," Journal of Network and Systems Management, vol. 20, no. 3, pp. 417-452, 2012.

[135]    L. Ciontea et al., "Epitaxial growth of CeO 2 thin film on cube textured NiW substrate using a propionate-based metalorganic deposition (MOD) method," Materials Chemistry and Physics, vol. 133, no. 2-3, pp. 772-778, 2012.

[136]    M. R. Cistelecan, "Constrained power control in mobile wireless networks using nonlinear control techniques C3 - 2012 20th Mediterranean Conference on Control and Automation, MED 2012 - Conference Proceedings," 2012 20th Mediterranean Conference on Control and Automation, MED 2012, pp. 746-751, 3 July 2012 through 6 July 2012 2012.

[137]    C. Ciupan, M. Steopan, and E. Ciupan, "The influence of the load on the behavior of the electromechanical variator C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 266-271, 24 May 2012 through 27 May 2012 2012.

[138]    E. Ciupan, "Modelling a handling robot to avoid an obstacle C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 391-395, 24 May 2012 through 27 May 2012 2012.

[139]    A. Ciurte, S. Nedevschi, and I. Rasa, "An algorithm for solving some nonlinear systems with applications to extremum problems," Taiwanese Journal of Mathematics, vol. 16, no. 3, pp. 1137-1150, 2012.

[140]    L. Claudiu, S. Sebastian, and B. Cristian, "Smart sensor implemented with PicoBlaze multi-processors technology C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 241-245, 25 October 2012 through 28 October 2012 2012.

[141]    N. Cobîrzan, C. Oltean-Dumbrava, and M. Brumaru, "Thermal rehabilitation of Romanian housing: A low cost assessment tool," International Journal of Sustainable Engineering, vol. 5, no. 3, pp. 235-243, 2012.

[142]    E. A. Cociş et al., "Characterisation of generated ash from hazardous waste incineration," Studia Universitatis Babes-Bolyai Chemia, no. 2, pp. 147-156, 2012.

[143]    A. Colesa and I. Stan, "Improving the responsiveness of replicated virtualized services in case of overloaded replicas connectivity C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 287-294, 26 September 2012 through 29 September 2012 2012.

[144]    M. Coman, G. Taro, and V. Oros, "Comparative aspects regarding the environmental management in romania and ukraine," Journal of Environmental Protection and Ecology, vol. 13, no. 2 A, pp. 1086-1089, 2012.

[145]    M. Compaoré et al., "Antioxidant, xanthine oxidase and lipoxygenase inhibitory activities and phenolics of Bauhinia rufescens Lam. (Caesalpiniaceae)," Natural Product Research, vol. 26, no. 11, pp. 1069-1074, 2012.

[146]    A. Comsa, A. B. Rus, and V. Dobrota, "Simulation of the Floyd-Warshall algorithm using OMNeT++ 4.1 C3 - 2012 9th International Conference on Communications, COMM 2012 - Conference Proceedings," 2012 9th International Conference on Communications, COMM 2012, pp. 229-232, 21 June 2012 through 23 June 2012 2012.

[147]    C. Contan and M. Topa, "Variable step size adaptive nonlinear echo canceller C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 267-270, 15 November 2012 through 16 November 2012 2012.

[148]    C. Contan, M. Zeller, W. Kellermann, and M. Topa, "Excitation-dependent stepsize control of adaptive volterra filters for acoustic echo cancellation C3 - European Signal Processing Conference," 20th European Signal Processing Conference, EUSIPCO 2012, pp. 604-608, 27 August 2012 through 31 August 2012 2012.

[149]    G. Copil, D. Moldovan, I. Salomie, T. Cioara, I. Anghel, and D. Borza, "Cloud SLA negotiation for energy saving - A particle swarm optimization approach C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 289-296, 30 August 2012 through 1 September 2012 2012.

[150]    V. S. Cora, L. Brânduşan, I. Vida-Simiti, and G. Thalmaier, "A study regarding the production of WC/Co cutting tools produced through PIM technology C3 - Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012," European International Powder Metallurgy Congress and Exhibition, Euro PM 2012, vol. 2, 16 September 2012 through 19 September 2012 2012.

[151]    V. S. Cora, L. Brânduşan, I. Vida-Simiti, and G. Y. Thalmaier, "Preliminary sintering study of powder injection molded WC/Co parts," Optoelectronics and Advanced Materials, Rapid Communications, vol. 6, no. 9-10, pp. 941-944, 2012.

[152]    A. Cordos, A. Vlaicu, B. Orza, and A. I. Cordos, "Automatic acquisition methods of X-Ray doses from Computed Tomography modalities," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 319-324, 2012.

[153]    N. Cordoş, P. Bere, and O. Nemeş, "Effects of 2-ethylhexyl nitrate on auto-ignition and combustion qualities of rapeseed oil," Studia Universitatis Babes-Bolyai Chemia, no. 1, pp. 175-184, 2012.

[154]    A. C. Cosma, R. Brehar, and S. Nedevschi, "Part-based pedestrian detection using HoG features and vertical symmetry C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 229-236, 30 August 2012 through 1 September 2012 2012.

[155]    C. Cosma et al., "Protection of alpha spectrometry detectors using thin formvar films and influence on detection characteristics," IEEE Transactions on Nuclear Science, vol. 59, no. 4 PART 1, pp. 1175-1179, 2012.

[156]    C. Costea and L. A. Dicsö, "A distributed control for interconnected systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 74-78, 24 May 2012 through 27 May 2012 2012.

[157]    I. Costin and G. Toader, "A nice separation of some Seiffert-type means by power means," International Journal of Mathematics and Mathematical Sciences, vol. 2012, 2012.

[158]    L. I. Cotîrlǎ, "Loewner chains and generalized almost starlike mappings," Mathematica, vol. 77, no. 2, pp. 126-132, 2012.

[159]    V. S. Cracium, C. Bojesen, and V. Trifa, "A custom flexible experimental setup to test air source heat pump for smart buildings C3 - AIP Conference Proceedings," International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2012, vol. 1479, no. 1, pp. 2348-2351, 19 September 2012 through 25 September 2012 2012.

[160]    V. S. Craciun, M. B. Blarke, and V. Trifa, "Fuel consumption analysis and optimization of a sustainable energy system for a 100% renewables smart house," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 333-336, 2012.

[161]    V. S. Craciun, M. B. Blarke, and V. Trifa, "Techno-economic optimization of a sustainable energy system for a 100% renewables Smart House," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 337-342, 2012.

[162]    V. S. Crǎciun, C. Bojesen, M. B. Blarke, and V. Trifa, "A flexible and low cost experimental stand for air source heat pump for Smart Buildings C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1040-1045, 24 May 2012 through 26 May 2012 2012.

[163]    V. S. Craciun, V. Trifa, C. Bojesen, and S. J. Andreasen, "Air source heat pump a key role in the development of smart buildings in future energy systems: Low cost and flexible experimental setup for air source heat pumps C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 984-989, 25 October 2012 through 27 October 2012 2012.

[164]    L. C. Cremene and D. Dumitrescu, "Analysis of cognitive radio scenes based on non-cooperative game theoretical modelling," IET Communications, vol. 6, no. 13, pp. 1876-1883, 2012.

[165]    L. C. Cremene, D. Dumitrescu, R. Nagy, and N. Gasko, "Cognitive radio simultaneous spectrum access/one-shot game modelling C3 - Proceedings of the 2012 8th International Symposium on Communication Systems, Networks and Digital Signal Processing, CSNDSP 2012," 2012 8th International Symposium on Communication Systems, Networks and Digital Signal Processing, CSNDSP 2012, 18 July 2012 through 20 July 2012 2012.

[166]    M. Cremene, A. Rarau, C. Miron, B. Iulian, V. Todica, and M. Riveill, "Adaptation mechanism based on service-context distance for Ubiquitous computing," International Journal of Computers, Communications and Control, vol. 7, no. 1, pp. 53-60, 2012.

[167]    O. Cret, T. Gyorfi, and A. Suciu, "Implementing true random number generators based on high fanout nets," Romanian Journal of Information Science and Technology, vol. 15, no. 3, pp. 277-298, 2012.

[168]    M. Cretu, L. Darabant, and R. Ciupa, "Modeling the activation of a non-homogenous nerve fiber by magnetic stimulation C3 - IEEE 12th International Conference on BioInformatics and BioEngineering, BIBE 2012," 12th IEEE International Conference on BioInformatics and BioEngineering, BIBE 2012, pp. 651-656, 11 November 2012 through 13 November 2012 2012.

[169]    A. Crişan, R. Enache, and L. Crisan, "The use of the FMEA method in preventing possible malfunctions at study program level," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 105-108, 2012.

[170]    G. C. Crişan, C. M. Pintea, and C. Chira, "Risk assessment for incoherent data," Environmental Engineering and Management Journal, vol. 11, no. 12, pp. 2169-2174, 2012.

[171]    L. Crişan, G. M. Pop, and C. Neamţu, "The influence of process temperature on geometrical deviations at the drilling of carbon fiber reinforced composites," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 109-112, 2012.

[172]    N. Crişan and L. C. Cremene, "Simulation of a handset MIMO antenna integration in a LTE Tx-Rx chain C3 - Proceedings of the 2012 8th International Symposium on Communication Systems, Networks and Digital Signal Processing, CSNDSP 2012," 2012 8th International Symposium on Communication Systems, Networks and Digital Signal Processing, CSNDSP 2012, 18 July 2012 through 20 July 2012 2012.

[173]    R. Crisan, T. Andrei, I. Nascu, and C. Darab, "Wastewater treatment plant in a milk processing factory C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 612-615, 24 May 2012 through 27 May 2012 2012.

[174]    S. M. Cristescu, C. M. Ionescu, B. Wyns, R. De Keyser, and I. Nascu, "Leader-follower string formation using cascade control for mobile robots C3 - 2012 20th Mediterranean Conference on Control and Automation, MED 2012 - Conference Proceedings," 2012 20th Mediterranean Conference on Control and Automation, MED 2012, pp. 1092-1098, 3 July 2012 through 6 July 2012 2012.

[175]    F. E. Cristian, D. C. Dumitrache, and E. H. Dulf, "Mathematical modeling of a refluxing reactor of an isotope separation column C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 123-128, 24 May 2012 through 27 May 2012 2012.

[176]    D. Csipkes, G. Csipkes, P. Farago, H. Fernandez-Canque, and S. Hintea, "An OTA-C field programmable analog array for multi-mode filtering applications C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1176-1182, 24 May 2012 through 26 May 2012 2012.

[177]    M. Cuibus and R. Potolea, "Adaptable swarm intelligence framework C3 - ACM International Conference Proceeding Series," 2nd International Conference on Web Intelligence, Mining and Semantics, WIMS 2012, 13 June 2012 through 15 June 2012 2012.

[178]    O. P. Cuibus and T. S. Leţia, "Genetic programming synthesis of discrete event controllers applied to urban vehicle traffic control C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 79-84, 24 May 2012 through 27 May 2012 2012.

[179]    O. P. Cuibus and T. S. Leţia, "Price based negotiation strategy for urban vehicle traffic control C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 278-283, 24 May 2012 through 27 May 2012 2012.

[180]    O. Cuibus and T. Leţia, "Cooperative control achieved by generic genetic fuzzy logic," Control Engineering and Applied Informatics, vol. 14, no. 3, pp. 43-53, 2012.

[181]    R. T. Curta and M. Steopan, "New feature based design software development C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 597-601, 24 May 2012 through 27 May 2012 2012.

[182]    M. Cypriani, P. Canalda, F. Spies, and A. Dobircau, "Benchmark measurements for Wi-Fi signal strength-based positioning system C3 - 2012 International Conference on Indoor Positioning and Indoor Navigation, IPIN 2012 - Conference Proceedings," 2012 International Conference on Indoor Positioning and Indoor Navigation, IPIN 2012, 13 November 2012 through 15 November 2012 2012.

[183]    A. Cziker, Z. Hanzelka, and I. Wasiak, "Power Quality Phenomena and Indicators," Electrical Energy Efficiency: Technologies and Applications, pp. 125-163, 2012.

[184]    L. Czumbil, D. Stet, D. D. Micu, V. Topa, and L. Ancas, "Induced voltage and current computation for different HVPL operating conditions C3 - IEEE International Symposium on Electromagnetic Compatibility," International Symposium on Electromagnetic Compatibility, EMC EUROPE 2012, 17 September 2012 through 21 September 2012 2012.

[185]    L. Czumbil, D. Stet, D. D. Micu, V. Topa, and L. Ancǎş, "Stream gas pipeline in proximity of high voltage power lines. Part II - Induced voltage evaluation C3 - Proceedings of the Universities Power Engineering Conference," 2012 47th International Universities Power Engineering Conference, UPEC 2012, 4 September 2012 through 7 September 2012 2012.

[186]    M. A. Dabacan, C. S. Cole, M. Radu, J. Harris, A. Wong, and M. Bot, "Global Design Competition: Enabling creative and innovative Digital Design C3 - ASEE Annual Conference and Exposition, Conference Proceedings," 119th ASEE Annual Conference and Exposition, 10 June 2012 through 13 June 2012 2012.

[187]    R. Dǎdârlat and N. Plitea, "Dynamics of a parallel structure with six dof and two guiding kinematic chains of the platform," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 343-348, 2012.

[188]    V. Dadarlat, "WSeH: Proposal for an adaptive monitoring framework for WSNs, with enhanced security and QoS support C3 - 2012 2nd International Conference on Digital Information and Communication Technology and its Applications, DICTAP 2012," 2012 2nd International Conference on Digital Information and Communication Technology and its Applications, DICTAP 2012, pp. 7-12, 16 May 2012 through 18 May 2012 2012.

[189]    G. I. Daian and T. S. Letia, "Consistency analysis of ERTMS monitoring systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 541-546, 24 May 2012 through 27 May 2012 2012.

[190]    I. S. Dan and D. Filip, "Document management in publishing houses," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 113-116, 2012.

[191]    M. F. Danca, "Chaos suppression via periodic change of variables in a class of discontinuous dynamical systems of fractional order," Nonlinear Dynamics, vol. 70, no. 1, pp. 815-823, 2012.

[192]    M. F. Danca, "Chaos suppression via periodic pulses in a class of piece-wise continuous systems," Computers and Mathematics with Applications, vol. 64, no. 5, pp. 849-855, 2012.

[193]    M. F. Danca, "OGY method for a class of discontinuous dynamical systems," Nonlinear Dynamics, vol. 70, no. 2, pp. 1523-1534, 2012.

[194]    M. F. Danca and S. Codreanu, "Modeling numerically the Rikitakes attractors by parameter switching," Journal of the Franklin Institute, vol. 349, no. 3, pp. 861-878, 2012.

[195]    M. F. Danca and D. Lai, "Parrondo's game model to find numerically stable attractors of a tumor growth model," International Journal of Bifurcation and Chaos, vol. 22, no. 10, 2012.

[196]    M. F. Danca, M. Romera, G. Pastor, and F. Montoya, "Finding attractors of continuous-time systems by parameter switching," Nonlinear Dynamics, vol. 67, no. 4, pp. 2317-2342, 2012.

[197]    M. Danciu, M. Gordan, C. Florea, and A. Vlaicu, "3D DCT supervised segmentation applied on liver volumes C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 779-783, 3 July 2012 through 4 July 2012 2012.

[198]    R. Danescu, F. Oniga, V. Turcu, and O. Cristea, "Long baseline stereovision for automatic detection and ranging of moving objects in the night sky," Sensors (Switzerland), vol. 12, no. 10, pp. 12940-12963, 2012.

[199]    R. Danescu, C. Pantilie, F. Oniga, and S. Nedevschi, "Particle grid tracking system stereovision based obstacle perception in driving environments," IEEE Intelligent Transportation Systems Magazine, vol. 4, no. 1, pp. 6-20, 2012.

[200]    D. M. Daniel and B. Monica, "A data fusion technique designed for multimodal biometric systems C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 155-158, 15 November 2012 through 16 November 2012 2012.

[201]    C. Darab, R. Hodrea, R. Crisan, and I. Nascu, "Modeling and internal model control strategy of pH neutralization process C3 - 2012 20th Telecommunications Forum, TELFOR 2012 - Proceedings," 2012 20th Telecommunications Forum, TELFOR 2012, pp. 1579-1582, 20 November 2012 through 22 November 2012 2012.

[202]    C. Darab, I. Nascu, and R. Crisan, "Modeling and validation of nonlinear time-varying pH industrial processes C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 114-117, 24 May 2012 through 27 May 2012 2012.

[203]    M. Daraban and D. Pitica, "Bus encoding algorithm to reduce crosstalk effects C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 377-382, 9 May 2012 through 13 May 2012 2012.

[204]    M. Daraban and D. Pitica, "Forbidden switching patterns to mitigate crosstalk on parallel data buses - CODEC design C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 31-36, 25 October 2012 through 28 October 2012 2012.

[205]    L. Darabant, M. Cretu, R. V. Ciupa, D. D. Micu, and D. Stet, "Assessment of the electric field induced in the human tissue during magnetic stimulation of the spinal cord," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 4, pp. 1164-1172, 2012.

[206]    T. David, M. Jacquelin, and L. Marchal, "Scheduling streaming applications on a complex multicore platform," Concurrency Computation Practice and Experience, vol. 24, no. 15, pp. 1726-1750, 2012.

[207]    G. F. Deak, A. Aştilean, and C. C. Avram, "The planning of athletic training based on probabilistic Petri Nets models C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 508-513, 24 May 2012 through 27 May 2012 2012.

[208]    A. Dehelean et al., "Spectroscopic studies of copper ions doped in tellurate glasses obtained by sol - Gel method C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 65-68, 29 September 2011 through 1 October 2011 2012.

[209]    M. Demange, J. Monnot, P. Pop, and B. Ries, "Selective graph coloring in some special classes of graphs C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 2nd International Symposium on Combinatorial Optimization, ISCO 2012, vol. 7422 LNCS, pp. 320-331, 19 April 2012 through 21 April 2012 2012.

[210]    D. Desideri, A. Maschio, D. D. Micu, and O. R. Miron, "Identification of an equivalent model for the permanent magnets of a magnetron sputtering device," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 2, pp. 514-527, 2012.

[211]    D. Desideri, A. Maschio, D. D. Micu, O. R. Miron, and M. Spolaore, "Equivalent model of a magnetron sputtering device with ferromagnetic yoke," Przeglad Elektrotechniczny, vol. 88, no. 7 B, pp. 134-137, 2012.

[212]    V. Diciuc, V. Lazar, and M. Lobonţiu, "The wear of bucket teeth belonging to the S1203 excavator," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 469-474, 2012.

[213]    V. Diciuc and M. Lobonţiu, "Virtual manufacturing cell for 3 types of pieces," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 475-480, 2012.

[214]    I. T. Dincuta-Tanase, L. Morar, and D. Pop, "Considerations on the use of indicators of efficiency and productivity in the decision making units (DMU)," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 427-432, 2012.

[215]    I. T. Dincuta-Tanase, L. Morar, D. Pop, P. Baru, and C. Bordea, "Work life (QWL) quality impact on productivity and organization efficiency," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 269-272, 2012.

[216]    M. Dinsoreanu, L. Braescu, and A. Bacu, "Towards a semantic-driven automatic staging area design for heterogeneous data integration C3 - ACM International Conference Proceeding Series," 14th International Conference on Information Integration and Web-Based Applications and Services, iiWAS 2012, pp. 290-293, 3 December 2012 through 5 December 2012 2012.

[217]    M. Dînşoreanu, M. Dobrin, M. Florea, and A. Fodor, "An integrated case-based reasoning and ontology-driven approach for designing recommendation systems C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 301-304, 30 August 2012 through 1 September 2012 2012.

[218]    M. Dinsoreanu, F. C. Macicasan, O. L. Hasna, and R. Potolea, "A unified approach for context-sensitive recommendations C3 - KDIR 2012 - Proceedings of the International Conference on Knowledge Discovery and Information Retrieval," 4th International Conference on Knowledge Discovery and Information Retrieval, KDIR 2012, pp. 85-94, 4 October 2012 through 7 October 2012 2012.

[219]    A. Dobircau, S. Folea, D. Bordencea, and H. Valean, "System based on low-power Wi-fi technology for indoor localization of a mobile user C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 581-586, 24 May 2012 through 27 May 2012 2012.

[220]    C. A. Dobocan, D. Popescu, V. Topa, and O. Stoica, "A calculation method for water footprint applied in an economical entity," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 349-352, 2012.

[221]    V. Dobrota and A. B. Rus, "Cross layer QoS implementations: The clean-slate approach," Using Cross-Layer Techniques for Communication Systems, pp. 53-93, 2012.

[222]    J. Domokos, O. Buza, and G. Toderean, "100K words, machine-readable, pronunciation dictionary for the Romanian language C3 - European Signal Processing Conference," 20th European Signal Processing Conference, EUSIPCO 2012, pp. 320-324, 27 August 2012 through 31 August 2012 2012.

[223]    C. Domuţa, N. S. Tipi, D. Radu, M. Hulea, and A. Aştilean, "Finding intermodal and multi-objective time-dependent best routes with exact algorithm C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 531-535, 24 May 2012 through 27 May 2012 2012.

[224]    V. A. Dordea, C. Chcrtes, and V. Trifa, "One-phase versus two-phase-on driving comparison of 8/6 Switched Reluctance Motor using finite element method analysis C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 460-463, 25 October 2012 through 27 October 2012 2012.

[225]    V. A. Dordea, C. Chertes, and V. Trifa, "Analysis of an 8/6 switched reluctance motor using the transient magnetic model," Journal of Electrical and Electronics Engineering, vol. 5, no. 1, pp. 49-52, 2012.

[226]    D. Dragomir, I. Cicalǎ, M. Dragomir, and S. Bodi, "Proposed instrument for aiding in the implementation of a social responsibility management system," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 123-126, 2012.

[227]    G. Dragomir, "A spatial-temporal data model for choosing optimal multimodal routes in urban areas C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 37-40, 30 August 2012 through 1 September 2012 2012.

[228]    M. Dragomir, S. Popescu, W. Płowucha, and M. Marxer, "Blended Learning in the field of Measurement Uncertainty. experiences from the MUVOT project," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 127-130, 2012.

[229]    S. S. Dragos, M. F. Vaida, L. A. Suta, M. C. Ureche, and A. Voina, "SYNCY: A software engine for data stream event synchronization C3 - 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012 - Joint Conference Proceedings," 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012, 12 October 2012 through 14 October 2012 2012.

[230]    M. Duca and L. Tamas, "Development of an operation training system - A case study C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'12, vol. 14, no. PART 1, pp. 1622-1627, 23 May 2012 through 25 May 2012 2012.

[231]    C. Dudescu, J. Naumann, and M. Stockmann, "Optical measurement of the strain-stress response during unloading of metal sheets undergoing large plastic deformations C3 - 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012," 11th IMEKO TC15 Youth Symposium on Experimental Solid Mechanics 2012, pp. 204-209, 30 May 2012 through 2 June 2012 2012.

[232]    E. H. Dulf, C. I. Pop, and F. Dulf, "Systematic Modeling of the ( 13C) Isotope Cryogenic Distillation Process," Separation Science and Technology (Philadelphia), vol. 47, no. 8, pp. 1234-1240, 2012.

[233]    E. H. Dulf, C. I. Pop, and F. V. Dulf, "Fractional calculus in 13C separation column control," Signal, Image and Video Processing, vol. 6, no. 3, pp. 479-485, 2012.

[234]    A. Duluard et al., "Fe/MgO/Fe (100) textured tunnel junctions exhibiting spin polarization features of single crystal junctions," Applied Physics Letters, vol. 100, no. 7, 2012.

[235]    R. Duma, P. Dobra, I. V. Sita, and D. Petreus, "Rapid control prototyping toolbox for the Stellaris LM3S8000 microcontrollers C3 - EDERC 2012 - Proceedings of the 5th European DSP in Education and Research Conference," 5th European DSP in Education and Research Conference, EDERC 2012, pp. 198-202, 13 September 2012 through 14 September 2013 2012.

[236]    R. Duma, P. Dobra, and M. Trusca, "Embedded application of fractional order control," Electronics Letters, vol. 48, no. 24, pp. 1526-1528, 2012.

[237]    R. Duma, P. Dobra, M. Trusca, B. Betea, and I. V. Sita, "Embedded control of electrical motors C3 - 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012 - Joint Conference Proceedings," 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012, 12 October 2012 through 14 October 2012 2012.

[238]    D. C. Dumitrache, F. E. Cristian, and I. Inoan, "A fractional order adaptive controller for a 13C cryogenic isotope separation plant C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 140-143, 24 May 2012 through 27 May 2012 2012.

[239]    D. C. Dumitrache, F. E. Cristian, and I. Inoan, "Estimation of the mass transfer coefficient for a 13C isotope separation process C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 206-209, 24 May 2012 through 27 May 2012 2012.

[240]    D. C. Dumitrache, B. D. Schutter, A. Huesman, and E. Dulf, "Modeling, analysis, and simulation of a cryogenic distillation process for 13C isotope separation," Journal of Process Control, vol. 22, no. 4, pp. 798-808, 2012.

[241]    P. Dunca, "The perspective of analytic philosophy of religion on the Almightiness of gods and the status of evil in the religions of the ancient near East Mesopotamia and Egypt," European Journal of Science and Theology, vol. 8, no. 3, pp. 27-35, 2012.

[242]    E. Durgun, D. I. Bilc, S. Ciraci, and P. Ghosez, "Hydrogen-saturated silicon nanowires heavily doped with interstitial and substitutional transition metals," Journal of Physical Chemistry C, vol. 116, no. 29, pp. 15713-15722, 2012.

[243]    C. Emilia, I. Tiberiu, T. Ionela, and P. Adrian, "Workspace generation for a 2 - DOF parallel mechanism using neural networks C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 121-130, 6 June 2012 through 8 June 2012 2012.

[244]    M. Enache, S. Gheorghiţǎ, and T. S. Leţia, "Expert system for simulating the behaviour of the cybernetic offenders C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 547-552, 24 May 2012 through 27 May 2012 2012.

[245]    M. Enache and T. S. Leţia, "Trap application for cyber criminals C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 627-631, 24 May 2012 through 27 May 2012 2012.

[246]    R. Etz, T. Patarau, S. Daraban, and D. Petreus, "Microgrid model for fast development of energy management algorithms C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 297-302, 9 May 2012 through 13 May 2012 2012.

[247]    R. Etz, T. Patarau, and D. Petreus, "Comparison between digital average current mode control and digital one cycle control for a bridgeless PFC boost converter C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 211-215, 25 October 2012 through 28 October 2012 2012.

[248]    R. Etz, T. Patarau, D. Petreus, S. Daraban, and D. Moga, "Digital control for phase shift converter C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 62-67, 24 May 2012 through 27 May 2012 2012.

[249]    R. Etz, D. Petreus, D. Moga, M. Abrudean, and T. Patarau, "Fuzzy digital control for DC-DC converters used in renewable energy systems C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 8th Power Plant and Power System Control Symposium, PPPSC 2012, vol. 8, no. PART 1, pp. 91-96, 2 September 2012 through 5 September 2012 2012.

[250]    M. Fabré, J. Binst, I. A. Bocsan, C. De Smet, and J. Ivens, "Heating shape memory polymers in alternative ways: Microwave and direct electrical heating C3 - ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials," 15th European Conference on Composite Materials: Composites at Venice, ECCM 2012, 24 June 2012 through 28 June 2012 2012.

[251]    P. Farago, G. Csipkes, D. Csipkes, and S. Hintea, "An evolutionary approach to design and calibration of reconfigurable OTA-C filters C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 363-368, 3 July 2012 through 4 July 2012 2012.

[252]    P. Farago, L. Festila, S. Hintea, G. Csipkes, D. Csipkes, and P. Soser, "A transistor-level reconfigurable circuit for rapid transconductor design and testing," Elektronika ir Elektrotechnika, no. 1, pp. 99-104, 2012.

[253]    C. Farcas, I. Ciocan, D. Petreus, and N. Palaghita, "Thermal modeling and analysis of a power device heat sinks C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 217-222, 25 October 2012 through 28 October 2012 2012.

[254]    A. Faur and C. Mircea, "Hybrid connections - The sustainable approach for prefabricated frame structures C3 - Concrc - Proceedings of Concrete Solutions, 4th International Conference on Concrete Repair," 4th International Conference on Concrete Repair, pp. 227-232, 26 September 2011 through 28 September 2011 2012.

[255]    A. Fenesan, O. McAree, W. H. Chen, T. Pana, and T. Bamber, "Building an electric model vehicle with obstacle avoidance system C3 - ICAC 12 - Proceedings of the 18th International Conference on Automation and Computing: Integration of Design and Engineering," 18th International Conference on Automation and Computing, ICAC 2012, pp. 358-362, 7 September 2012 through 8 September 2012 2012.

[256]    A. Fenesan, T. Pana, D. Szocs, and W. H. Chen, "Building an electric model vehicle and implementing an obstacle avoidance algorithm C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 49-53, 25 October 2012 through 27 October 2012 2012.

[257]    S. Ferent-Pipas, B. C. Padurean, and C. Ciupan, "Plasma ARC cutting - overview," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 357-360, 2012.

[258]    A. T. Filip, R. P. Hangiu, C. Marţiş, and K. A. Biro, "Multiphysics modeling of an permanent magnet synchronous machine," Journal of Electrical and Electronics Engineering, vol. 5, no. 2, pp. 55-58, 2012.

[259]    N. Filip, M. Moldovan, and C. Golgot, "Access optimization in an urban area: A case study C3 - WIT Transactions on the Built Environment," 18th International Conference on Urban Transport and the Environment, UT12, vol. 128, pp. 347-358, 15 May 2012 through 17 May 2012 2012.

[260]    C. Filipoi et al., "Water self-diffusion anisotropy and electrical conductivity of perfluorosulfonic acid/SiO 2 composite proton exchange membranes," Chemical Physics Letters, vol. 554, pp. 143-149, 2012.

[261]    R. Fizeşan and D. Piticǎ, "Power integrity design tips to minimize the effects of mounting inductance of decoupling capacitors C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 36-41, 24 May 2012 through 26 May 2012 2012.

[262]    R. Fizesan and O. Pop, "A MATLAB tool to optimize the selection of the decoupling capacitors in a PDN C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 223-226, 25 October 2012 through 28 October 2012 2012.

[263]    S. Flonta, L. C. Miclea, and I. Ştefan, "Hybrid cryptosystem with hierarchical private key C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 337-340, 24 May 2012 through 27 May 2012 2012.

[264]    C. Florea, M. Moldovan, M. Gordan, A. Vlaicu, and R. Orghidan, "Eye color classification for makeup improvement C3 - 2012 Federated Conference on Computer Science and Information Systems, FedCSIS 2012," 2012 Federated Conference on Computer Science and Information Systems, FedCSIS 2012, pp. 55-62, 9 September 2012 through 12 September 2012 2012.

[265]    R. V. Florian, "The chronotron: A neuron that learns to fire temporally precise spike patterns," PLoS ONE, vol. 7, no. 8, 2012.

[266]    D. Fodorean, L. Idoumghar, A. N'Diaye, D. Bouquain, and A. Miraoui, "Simulated annealing algorithm for the optimisation of an electrical machine," IET Electric Power Applications, vol. 6, no. 9, pp. 735-742, 2012.

[267]    D. Fodorean, D. C. Popa, and M. Ruba, "On the fault-tolerance of permanent magnet synchronous machines and drives used in hybrid vehicle application," International Review of Electrical Engineering, vol. 7, no. 2, pp. 3795-3803, 2012.

[268]    D. Fodorean and L. Szabo, "Control of a permanent magnet synchronous motor for electric scooter application C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 1178-1181, 20 June 2012 through 22 June 2012 2012.

[269]    S. Folea, D. Bordencea, C. Hotea, and H. Valean, "Smart home automation system using Wi-Fi low power devices C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 569-574, 24 May 2012 through 27 May 2012 2012.

[270]    S. Folea, G. Mois, and L. Miclea, "Power quality measurement system using FPGAs C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1280-1285, 24 May 2012 through 26 May 2012 2012.

[271]    S. Folea, G. Mois, L. Miclea, and D. Ursutiu, "Battery lifetime testing using LabVIEW™ C3 - 2012 9th International Conference on Remote Engineering and Virtual Instrumentation, REV 2012," 2012 9th International Conference on Remote Engineering and Virtual Instrumentation, REV 2012, 4 June 2012 through 6 June 2012 2012.

[272]    S. Folea, M. Neagu, G. Mois, and L. Miclea, "Multi-purpose sensor platform development C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 341-346, 24 May 2012 through 27 May 2012 2012.

[273]    C. Fortuna, P. Oniga, Z. Padrah, M. Mohorcic, and A. Moraru, "Metadata management for the web of things: A practical perspective C3 - ACM International Conference Proceeding Series," 3rd International Workshop on the Web of Things, WOT 2012, 19 June 2012 through 19 June 2012 2012.

[274]    D. Frǎţilǎ and C. Caizar, "Investigation of the influence of process parameters and cooling method on the surface quality of AISI-1045 during turning," Materials and Manufacturing Processes, vol. 27, no. 10, pp. 1123-1128, 2012.

[275]    J. G. Freeman, O. Samdal, A. Bǎban, and D. Bancila, "The relationship between school perceptions and psychosomatic complaints: Cross-country differences across Canada, Norway, and Romania," School Mental Health, vol. 4, no. 2, pp. 95-104, 2012.

[276]    D. F. Fril and C. Caizar, "Assessment of cooling effect and surface quality to face milling of AlMg 3 using several cooling lubrication methods," Materials and Manufacturing Processes, vol. 27, no. 3, pp. 291-296, 2012.

[277]    E. F. Gabor, O. Ichim, and M. Şuteu, "Phyto-additives in rainbow trout (Oncorhynchus mykiss) nutrition," Biharean Biologist, vol. 6, no. 2, pp. 134-139, 2012.

[278]    M. S. Gabor, T. Petrisor Jr, C. Tiusan, M. Hehn, B. S. Vasile, and T. Petrisor, "Influence of a TiO 2 buffer layer on the magnetic properties of anatase Co:TiO 2 thin films," Journal of Applied Physics, vol. 111, no. 8, 2012.

[279]    S. Gabriella, A. Veronica, C. Virginia, D. Leontin, and M. Zaharie, "Determination of phenolic compounds from wine samples by GC/MS system," Revista de Chimie, vol. 63, no. 9, pp. 855-858, 2012.

[280]    K. S. Gaeid, H. W. Ping, M. K. Masood, and L. Szabo, "Survey of wavelet fault diagnosis and tolerant of induction machines with case study," International Review of Electrical Engineering, vol. 7, no. 3, pp. 4437-4456, 2012.

[281]    B. Gavrea, "Improvement of some inequalities of Chebysev-Grüss type," Computers and Mathematics with Applications, vol. 64, no. 6, pp. 2003-2010, 2012.

[282]    I. Gavrea and M. Ivan, "An answer to a conjecture on Bernstein operators," Journal of Mathematical Analysis and Applications, vol. 390, no. 1, pp. 86-92, 2012.

[283]    A. M. Gazdac, A. M. Mabwe, F. Betin, C. S. Martis, and K. Biro, "Investigation on the thermal behavior of the dual-rotor Permanent Magnet Induction Machine C3 - IECON Proceedings (Industrial Electronics Conference)," 38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012, pp. 1858-1863, 25 October 2012 through 28 October 2012 2012.

[284]    A. M. Gazdac, A. M. Mabwe, C. S. Martis, F. Betin, and K. Biro, "Analytical design algorithm and FEM analysis of the dual-rotor Permanent Magnet Induction Machine C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 1185-1191, 2 September 2012 through 5 September 2012 2012.

[285]    A. M. Gazdac, C. S. Martis, A. M. Mabwe, and K. Biro, "Analysis of material influence on the performance of the dual-rotor Permanent Magnet Induction Machine C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 453-459, 24 May 2012 through 26 May 2012 2012.

[286]    S. Gheorghiţǎ, R. Munteanu, and M. Enache, "Study of neural networks to improve performance for character recognition C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 323-326, 24 May 2012 through 27 May 2012 2012.

[287]    B. Gherman, D. Pisla, C. Vaida, and N. Plitea, "Development of inverse dynamic model for a surgical hybrid parallel robot with equivalent lumped masses," Robotics and Computer-Integrated Manufacturing, vol. 28, no. 3, pp. 402-415, 2012.

[288]    B. Gherman, C. Vaida, N. Plitea, B. Gyurka, and D. Pisla, "The experimental model of an active parallel surgical robot," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 361-366, 2012.

[289]    M. Gherman, R. Terebes, and M. Borda, "Time series analysis using wavelets and GJR-GARCH models C3 - European Signal Processing Conference," 20th European Signal Processing Conference, EUSIPCO 2012, pp. 2138-2142, 27 August 2012 through 31 August 2012 2012.

[290]    C. Ghitǎ, N. Pop, and H. Cioban, "Quasi-Static behavior as a limit process of a dynamical one for an anisotropic hardening material," Computational Materials Science, vol. 52, no. 1, pp. 217-225, 2012.

[291]    C. Ghiţǎ, N. Pop, and I. N. Popescu, "Existence result of an effective stress for an isotropic visco-plastic composite," Computational Materials Science, vol. 64, pp. 52-56, 2012.

[292]    M. V. Ghiurcau, C. Rusu, R. C. Bilcu, and J. Astola, "Audio based solutions for detecting intruders in wild areas," Signal Processing, vol. 92, no. 3, pp. 829-840, 2012.

[293]    I. Giosan and S. Nedevschi, "A solution for probabilistic inference and tracking of obstacles classification in urban traffic scenarios C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 221-227, 30 August 2012 through 1 September 2012 2012.

[294]    S. Giovanzana and S. Talu, "Mathematical models for the shape analysis of human crystalline lens," Journal of Modern Optics, vol. 59, no. 1, pp. 26-34, 2012.

[295]    M. Giurgiu and A. Kabir, "Automatic transcription and speech recognition of Romanian corpus RO-GRID C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 465-468, 3 July 2012 through 4 July 2012 2012.

[296]    C. Golban, S. Istvan, and S. Nedevschi, "Stereo based visual odometry in difficult traffic scenes C3 - IEEE Intelligent Vehicles Symposium, Proceedings," 2012 IEEE Intelligent Vehicles Symposium, IV 2012, pp. 736-741, 3 June 2012 through 7 June 2012 2012.

[297]    H. Gonska, D. Kacsó, and I. Raşa, "The Genuine Bernstein-Durrmeyer Operators Revisited," Results in Mathematics, vol. 62, no. 3-4, pp. 295-310, 2012.

[298]    H. Gonska, I. Raşa, and M. D. Rusu, "Generalized Ostrowski-Grüss-type Inequalities," Results in Mathematics, vol. 62, no. 3-4, pp. 311-318, 2012.

[299]    H. Gonska, I. Raşsa, and M. D. Rusu, "Applications of an Ostrowski-type Inequality," Journal of Computational Analysis and Applications, vol. 14, no. 1, pp. 19-31, 2012.

[300]    D. Gorgan, V. Bacu, D. Mihon, D. Rodila, K. Abbaspour, and E. Rouholahnejad, "Grid based calibration of SWAT hydrological models," Natural Hazards and Earth System Science, vol. 12, no. 7, pp. 2411-2423, 2012.

[301]    D. Gorgan et al., "Software platform interoperability throughout envirogrids portal," IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 5, no. 6, pp. 1617-1627, 2012.

[302]    D. Gorgan, V. Bacu, T. Stefanut, D. Rodila, and D. Mihon, "Earth Observation application development based on the Grid oriented ESIP satellite image processing platform," Computer Standards and Interfaces, vol. 34, no. 6, pp. 541-548, 2012.

[303]    L. C. Goron, L. Tamas, and G. Lazea, "Classification within indoor environments using 3D perception C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 400-405, 24 May 2012 through 27 May 2012 2012.

[304]    D. Gota, C. Domuta, and L. Miclea, "Design and control of smart hybrid renewable energy systems using modified genetic algorithms and direct design control C3 - Asia-Pacific Power and Energy Engineering Conference, APPEEC," 2012 Asia-Pacific Power and Energy Engineering Conference, APPEEC 2012, 27 March 2012 through 29 March 2012 2012.

[305]    N. Gougoulias, A. Papachatzis, H. Kalorizou, I. Vagelas, L. Giurgiulescu, and N. Chouliaras, "Total phenolics, lycopene and antioxidant activity of hydroponically cultured tomato sandin F1," Carpathian Journal of Food Science and Technology, vol. 4, no. 2, pp. 46-51, 2012.

[306]    A. Grama and D. Petreus, "A Matlab simulator tool for a class e power amplifier designed to generate plasma torch C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1380-1385, 24 May 2012 through 26 May 2012 2012.

[307]    L. Grama and M. Sîrbu, "Several phase approximations from gain samples - The linear frequency domain C3 - 2012 9th International Conference on Communications, COMM 2012 - Conference Proceedings," 2012 9th International Conference on Communications, COMM 2012, pp. 39-42, 21 June 2012 through 23 June 2012 2012.

[308]    I. Grondman, L. Busoniu, G. A. D. Lopes, and R. Babuška, "A survey of actor-critic reinforcement learning: Standard and natural policy gradients," IEEE Transactions on Systems, Man and Cybernetics Part C: Applications and Reviews, vol. 42, no. 6, pp. 1291-1307, 2012.

[309]    I. Grondman, M. Vaandrager, L. Buşoniu, R. Babuška, and E. Schuitema, "Efficient model learning methods for actor-critic control," IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, vol. 42, no. 3, pp. 591-602, 2012.

[310]    A. Groza and I. A. Letia, "Plausible description logic programs for stream reasoning," Future Internet, vol. 4, no. 4, pp. 865-881, 2012.

[311]    S. D. Grozav and V. Ceclan, "Industrial automation in the relative spiral feed and contact contour during cold orbital deformation," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 367-370, 2012.

[312]    E. S. Gurzǎu, C. Baciu, A. E. Gurzǎu, S. Surdu, and G. Damian, "Impact of the tailings impoundments on groundwater quality in bozânta area (baia mare - NW Romania) and human exposure," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 4, pp. 231-240, 2012.

[313]    T. Györke, D. Popescu, S. Popescu, and D. Hedeşiu, "Age-related limitations conditioning elderly independence as basic input for product development targeting senior's needs," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 481-484, 2012.

[314]    T. Györke, D. Popescu, and M. Steopan, "Quality management techniques as support for designing automated domestic appliances for people with special needs C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 255-260, 24 May 2012 through 27 May 2012 2012.

[315]    B. Gyurka et al., "Integrated control techniques for PARASURG 9M parallel robot C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 461-466, 24 May 2012 through 27 May 2012 2012.

[316]    I. Haller and S. Nedevschi, "Design of interpolation functions for subpixel-accuracy stereo-vision systems," IEEE Transactions on Image Processing, vol. 21, no. 2, pp. 889-898, 2012.

[317]    D. Hanganu, N. Olah, L. Vlase, A. Mǎrculescu, and A. Pintea, "Chemical research of carotenoids from Chenopodium bonus henricus L. (Chenopodiaceae)," Farmacia, vol. 60, no. 6, pp. 840-849, 2012.

[318]    R. P. Hangiu, A. T. Filip, C. S. Martis, and K. Á. Biró, "System-level modeling and simulation of a permanent magnet synchronous motor for an Integrated Starter Alternator," Journal of Electrical and Electronics Engineering, vol. 5, no. 2, pp. 67-70, 2012.

[319]    R. P. Hangiu, A. T. Filip, C. S. Martis, and K. A. Biro, "Performance assessment of an integrated starter alternator for hybrid electric vehicles C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 70-75, 25 October 2012 through 27 October 2012 2012.

[320]    Z. Hanzelka, W. Szpyra, A. Cziker, and K. Piatek, "Reactive Power Compensation," Electrical Energy Efficiency: Technologies and Applications, pp. 371-398, 2012.

[321]    I. Hazyuk, C. Ghiaus, and D. Penhouet, "Optimal temperature control of intermittently heated buildings using Model Predictive Control: Part I - Building modeling," Building and Environment, vol. 51, pp. 379-387, 2012.

[322]    I. Hazyuk, C. Ghiaus, and D. Penhouet, "Optimal temperature control of intermittently heated buildings using Model Predictive Control: Part II - Control algorithm," Building and Environment, vol. 51, pp. 388-394, 2012.

[323]    C. Hebedean, C. Munteanu, A. Racasan, and O. Antonescu, "Technologies to increase HF losses in planar structures and their limitations C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 48-53, 24 May 2012 through 26 May 2012 2012.

[324]    C. Hebedean, C. Munteanu, A. Racasan, and C. Pacurar, "Optimum geometry for planar structures regarding their loss factor C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 693-698, 25 October 2012 through 27 October 2012 2012.

[325]    D. M. Hedeşiu, S. G. Popescu, and M. Dragomir, "Critical analysis on quality costs models," Quality - Access to Success, vol. 13, no. 131, pp. 71-76, 2012.

[326]    D. Hedeşiu, S. Popescu, and A. Petruş, "Generic structure for quality costs in a life cycle approach," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 161-174, 2012.

[327]    S. Herle, S. Man, G. Lazea, and P. Raica, "Myoelectric control strategies for a human upper limb prosthesis," Control Engineering and Applied Informatics, vol. 14, no. 1, pp. 58-66, 2012.

[328]    R. Hodrea, C. Darab, and I. Nascu, "Modeling of drug delivery in general anesthesia C3 - 2012 20th Telecommunications Forum, TELFOR 2012 - Proceedings," 2012 20th Telecommunications Forum, TELFOR 2012, pp. 891-894, 20 November 2012 through 22 November 2012 2012.

[329]    R. Hodrea, I. Nascu, R. De Keyser, and C. M. Ionescu, "EPSAC predictive control applied to muscle relaxant administration C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 8th IFAC Symposium on Biological and Medical Systems, BMS 2012, pp. 331-336, 29 August 2012 through 31 August 2012 2012.

[330]    R. Hodrea, I. Nascu, and H. Vasian, "Wiener model identification for muscle relaxation C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 481-485, 24 May 2012 through 27 May 2012 2012.

[331]    C. Holbura, M. Gordan, A. Vlaicu, I. Stoian, and D. Capatana, "Retinal vessels segmentation using supervised classifiers decisions fusion C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 185-190, 24 May 2012 through 27 May 2012 2012.

[332]    A. Holhoş, "Uniform approximation of functions by Meyer-König and Zeller operators," Journal of Mathematical Analysis and Applications, vol. 393, no. 1, pp. 33-37, 2012.

[333]    C. I. Horvat et al., "Perfluorosulfonic acid ionomer - Silica composite membranes prepared using hyperbranched polyethoxysiloxane for polymer electrolyte membrane fuel cells," International Journal of Hydrogen Energy, vol. 37, no. 19, pp. 14454-14462, 2012.

[334]    F. A. Hrebenciuc, D. Moga, D. Petreus, Z. Barabas, and R. Moga, "Combined analytical and numerical approach to study coil arrays for contactless charging of batteries in active transponders," Elektronika ir Elektrotechnika, vol. 123, no. 7, pp. 37-42, 2012.

[335]    Q. Huang, P. Kryger, Y. Le Conte, and R. F. A. Moritz, "Survival and immune response of drones of a Nosemosis tolerant honey bee strain towards N. ceranae infections," Journal of Invertebrate Pathology, vol. 109, no. 3, pp. 297-302, 2012.

[336]    B. Humoreanu and I. Nascu, "Wastewater treatment plant SCADA application C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 575-580, 24 May 2012 through 27 May 2012 2012.

[337]    C. A. Huniadi, T. A. Antal, and F. Stamatian, "The effects of ulipristal on surgically induced endometriosis in a rat model," Gineco.ro, vol. 8, no. 2, pp. 76-81, 2012.

[338]    D. Hurgoiu, V. Tompa, C. Neamţu, and D. Popescu, "Low-cost GPS navigation for NXT-based robots," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 371-374, 2012.

[339]    A. Iancu and D. Rafiroiu, "Treatment of carotid in-stent stenosis: "To stent or not to stent"," Journal of Endovascular Therapy, vol. 19, no. 3, pp. 325-328, 2012.

[340]    S. Ignat, H. Valean, and D. Capatina, "Virtual instrumentation in power engineering C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 367-371, 24 May 2012 through 27 May 2012 2012.

[341]    D. A. Iluţiu-Varvara, "Study concerning the analysis of the solid waste generation dynamics specific to the steelmaking in Romania," Metalurgia International, vol. 17, no. 3, pp. 70-75, 2012.

[342]    D. Inoan and I. Raşa, "A majorization inequality for Wright-convex functions revisited," Aequationes Mathematicae, vol. 83, no. 3, pp. 209-214, 2012.

[343]    I. Inoan, D. C. Dumitrache, and A. O. Neaga, "Kinematics analysis and trajectory simulation of an unloading machine C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 434-437, 24 May 2012 through 27 May 2012 2012.

[344]    I. Inoan, D. C. Dumitrache, and T. Szelitzky, "A control system design for the positioning system of an unloading machine C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 161-165, 24 May 2012 through 27 May 2012 2012.

[345]    I. Inoan, D. C. Dumitrache, and T. Szelitzky, "Parametric identification of a positioning system for a billets unloading machine C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'12, vol. 14, no. PART 1, pp. 1722-1726, 23 May 2012 through 25 May 2012 2012.

[346]    C. Ioanes and A. Chioreanu, "Study on teach pendant user interface design for supporting the unskilled personnel," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 375-378, 2012.

[347]    A. M. Ioani and E. Tripa, "Structural behavior of an innovative all-precast concrete dual system for residential buildings," PCI Journal, vol. 57, no. 1, pp. 110-123, 2012.

[348]    C. M. Ionescu, I. Nascu, and R. De Keyser, "Towards a multivariable model for controlling the depth of anaesthesia using propofol and Remifentanil C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 8th IFAC Symposium on Biological and Medical Systems, BMS 2012, pp. 325-330, 29 August 2012 through 31 August 2012 2012.

[349]    L. I. Iozan, M. Kirkko-Jaakkola, J. Collin, J. Takala, and C. Rusu, "Using a MEMS gyroscope to measure the Earths rotation for gyrocompassing applications," Measurement Science and Technology, vol. 23, no. 2, 2012.

[350]    I. A. Ivanciu, F. Stoicuta, M. Anghel, A. B. Rus, and V. Dobrota, "Enhancement of information object management tool about Audio-video/ network status/ QoS content in OpenNetInf C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 111-115, 3 July 2012 through 4 July 2012 2012.

[351]    R. Jánó, D. Piticǎ, P. Svasta, and G. Vǎrzaru, "Effects of reflow soldering methods on the lifetime of capacitors C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 183-188, 9 May 2012 through 13 May 2012 2012.

[352]    L. Jäntschi, S. D. Bolboacǎ, and R. E. Sestraş, "A simulation study for the distribution law of relative moments of evolution," Complexity, vol. 17, no. 6, pp. 52-63, 2012.

[353]    L. Jäntschi, R. C. Sobolu, and S. D. Bolboacǎ, "An analysis of the distribution of seed size: A case study of the gymnosperms," Notulae Botanicae Horti Agrobotanici Cluj-Napoca, vol. 40, no. 2, pp. 46-52, 2012.

[354]    P. Jeong, D. Pojar, and S. Nedevschi, "Accurate localization of mobile robot under the weakly callibrated motion model C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 141-147, 30 August 2012 through 1 September 2012 2012.

[355]    O. L. Joita and R. De Keyser, "Validation of a simple relay-based PID autotuner with specified modulus margin C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 129-134, 24 May 2012 through 27 May 2012 2012.

[356]    D. I. Julean, "Oradea, Romania: A living Jewish memorial," East European Jewish affairs, vol. 42, no. 2, pp. 111-128, 2012.

[357]    F. N. Jurca and C. Martis, "Theoretical and experimental analysis of a three-phase permanent magnet claw-pole synchronous generator," IET Electric Power Applications, vol. 6, no. 8, pp. 491-503, 2012.

[358]    F. Jurca and D. Fodorean, "Axial flux interior permanent magnet synchronous motor for small electric traction vehicle C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 365-368, 20 June 2012 through 22 June 2012 2012.

[359]    F. Jurca, C. Marţiş, and D. Fodorean, "Analysis of a radial flux synchronous machine with outer rotor for integrated starter-alternator C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 496-500, 20 June 2012 through 22 June 2012 2012.

[360]    V. Kacenka, P. Rafajdus, P. Makys, V. Vavrus, and L. Szabó, "Static and dynamic fault analysis of switched reluctance motor C3 - Proceedings of 9th International Conference, ELEKTRO 2012," 9th International Conference on ELEKTRO 2012, pp. 206-211, 21 May 2012 through 22 May 2012 2012.

[361]    E. Karapinar and V. Berinde, "Quadruple fixed point theorems for nonlinear contractions in partially ordered metric spaces," Banach Journal of Mathematical Analysis, vol. 6, no. 1, pp. 74-89, 2012.

[362]    I. Khalaf, L. Vlase, B. Ivǎnescu, D. Lazǎr, and A. Corciovǎ, "HPLC analysis of polyphenolic compounds, phytoestrogens and sterols from Glycyrrhiza glabra L. tincture," Studia Universitatis Babes-Bolyai Chemia, no. 2, pp. 113-118, 2012.

[363]    A. Kipp, T. Jiang, M. Fugini, and I. Salomie, "Layered Green Performance Indicators," Future Generation Computer Systems, vol. 28, no. 2, pp. 478-489, 2012.

[364]    B. S. Kirei, M. G. Neag, and M. D. Topa, "Blind frequency-selective I/Q mismatch compensation using subband processing," IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 59, no. 5, pp. 302-306, 2012.

[365]    R. Kiss, "CAD / CAM application of Visual Lisp," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 493-498, 2012.

[366]    Z. I. Kiss and Z. A. Polgar, "Random network coding based solution for resource efficient data dissemination C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 323-328, 30 August 2012 through 1 September 2012 2012.

[367]    Z. I. Kiss, Z. A. Polgar, M. P. Stef, and V. Bota, "Network coding solution for improving transmission reliability in wireless sensor networks employed in industrial monitoring C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 190-195, 3 July 2012 through 4 July 2012 2012.

[368]    M. H. Kovacs, D. Ristoiu, and T. Ristoiu, "Pah transfer from soil to selected vegetables grown on industrially contaminated soil," Journal of Environmental Protection and Ecology, vol. 13, no. 2 A, pp. 900-905, 2012.

[369]    E. S. Lakatos, R. M. Gazdac, and V. Dan, "Using the web by finnish SME's for corporate social responsibility activities C3 - Advanced Materials Research," 2012 2nd International Conference on Advanced Material Research, ICAMR 2012, vol. 463-464, pp. 1186-1189, 7 January 2012 through 8 January 2012 2012.

[370]    C. Lapusan, V. Maties, O. Hancu, and C. Rad, "Mechatronic concepts in design and control of a teleoperated robot C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 575-582, 6 June 2012 through 8 June 2012 2012.

[371]    I. Lar and M. M. Radulescu, "Equivalent core-loss resistance identification for interior permanent-magnet synchronous machines C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 1667-1671, 2 September 2012 through 5 September 2012 2012.

[372]    I. Lar, M. M. Radulescu, E. Ritchie, and A. A. Pop, "Current control methods for grid-side three-phase PWM voltage-source inverter in distributed generation systems C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 859-867, 24 May 2012 through 26 May 2012 2012.

[373]    G. I. Latiu, O. A. Cret, and L. Vacariu, "A new evolutionary approach for the structural testing of switch-case constructs C3 - IJCCI 2012 - Proceedings of the 4th International Joint Conference on Computational Intelligence," 4th International Joint Conference on Computational Intelligence, IJCCI 2012, pp. 42-51, 5 October 2012 through 7 October 2012 2012.

[374]    G. I. Laţiu, O. A. Creţ, and L. Vǎcariu, "Automatic test data generation for software path testing using evolutionary algorithms C3 - Proceedings - 3rd International Conference on Emerging Intelligent Data and Web Technologies, EIDWT 2012," 3rd International Conference on Emerging Intelligent Data and Web Technologies, EIDWT 2012, pp. 1-8, 19 September 2012 through 21 September 2012 2012.

[375]    M. Lauran, "Existence results for some nonlinear integral equations," Miskolc Mathematical Notes, vol. 13, no. 1, pp. 67-74, 2012.

[376]    L. Lǎzǎrescu, D. S. Comşa, I. Nicodim, I. Ciobanu, and D. Banabic, "Characterization of plastic behaviour of sheet metals by hydraulic bulge test," Transactions of Nonferrous Metals Society of China (English Edition), vol. 22, no. SUPPL.2, pp. s275-s279, 2012.

[377]    L. Lazarescu, D. S. Comsa, I. Nicodim, I. Ciobanu, and D. Bananic, "Investigation of bulge radius variation and its effect on the flow stress in the hydraulic bulge test C3 - Steel Research International," 14th International Conference on Metal Forming, METAL FORMING 2012, vol. SPL. ISSUE, pp. 395-398, 16 September 2012 through 19 September 2012 2012.

[378]    L. Lǎzǎrescu, I. P. Nicodim, D. S. Comşa, and D. Banabic, "A procedure for the evaluation of flow stress of sheet metal by hydraulic bulge test using elliptical dies C3 - Key Engineering Materials," 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012, vol. 504-506, pp. 107-112, 14 March 2012 through 16 March 2012 2012.

[379]    C. Lemnaru, M. Cuibus, A. Bona, A. Alic, and R. Potolea, "A distributed methodology for imbalanced classification problems C3 - Proceedings - 2012 11th International Symposium on Parallel and Distributed Computing, ISPDC 2012," 2012 11th International Symposium on Parallel and Distributed Computing, ISPDC 2012, pp. 164-171, 25 June 2012 through 29 June 2012 2012.

[380]    C. Lemnaru, M. Dobrin, M. Florea, and R. Potolea, "Designing a travel recommendation system using case-based reasoning and domain ontology C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 23-30, 30 August 2012 through 1 September 2012 2012.

[381]    C. Lemnaru and R. Potolea, "Imbalanced classification problems: Systematic study, issues and best practices C3 - Lecture Notes in Business Information Processing," 13th International Conference on Enterprise Information Systems, ICEIS 2011, vol. 102 LNBIP, pp. 35-50, 8 June 2011 through 11 June 2011 2012.

[382]    C. Lemnaru, A. Sin-Neamtiu, M. A. Veres, and R. Potolea, "A system for historical documents transcription based on hierarchical classification and dictionary matching C3 - KDIR 2012 - Proceedings of the International Conference on Knowledge Discovery and Information Retrieval," 4th International Conference on Knowledge Discovery and Information Retrieval, KDIR 2012, pp. 353-357, 4 October 2012 through 7 October 2012 2012.

[383]    C. Lemnaru, A. Tudose-Vintila, A. Coclici, and R. Potolea, "A hybrid solution for imbalanced classification problems case study on network intrusion detection C3 - KDIR 2012 - Proceedings of the International Conference on Knowledge Discovery and Information Retrieval," 4th International Conference on Knowledge Discovery and Information Retrieval, KDIR 2012, pp. 348-352, 4 October 2012 through 7 October 2012 2012.

[384]    Z. Lendek, T. M. Guerra, and J. Lauber, "Construction of extended Lyapunov functions and control laws for discrete-time TS systems C3 - IEEE International Conference on Fuzzy Systems," 2012 IEEE International Conference on Fuzzy Systems, FUZZ 2012, 10 June 2012 through 15 June 2012 2012.

[385]    Z. Lendek, J. Lauber, and T. M. Guerra, "Switching fuzzy observers for periodic TS systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 14-19, 24 May 2012 through 27 May 2012 2012.

[386]    Z. Lendek, J. Lauber, and T. M. Guerra, "Switching Lyapunov functions for periodic TS systems C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 1st IFAC Conference on Embedded Systems, Computational Intelligence and Telematics in Control, CESCIT 2012, pp. 102-107, 3 April 2012 through 5 April 2012 2012.

[387]    I. A. Letia and A. Goron, "Checking the norms for explanation C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 3-10, 30 August 2012 through 1 September 2012 2012.

[388]    I. A. Letia and A. Goron, "Towards justifying norm compliance C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 7th International Workshop on Coordination, Organizations, Institutions, and Norms in Agent System VII - IEEE/WIC/ACM International Conference on Intelligent Agent Technology, COIN@WI-IAT 2011, vol. 7254 LNAI, pp. 110-128, 22 August 2011 through 22 August 2011 2012.

[389]    I. A. Letia and A. Groza, "Arguing with justifications between collaborating agents C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 8th International Workshop on Argumentation in Multi-Agent Systems, ArgMAS 2011, vol. 7543 LNAI, pp. 102-116, 3 May 2011 through 3 May 2011 2012.

[390]    I. A. Letia and A. Groza, "Description plausible logic programs for stream reasoning C3 - ICAART 2012 - Proceedings of the 4th International Conference on Agents and Artificial Intelligence," 4th International Conference on Agents and Artificial Intelligence, ICAART 2012, vol. 1, pp. 560-566, 6 February 2012 through 8 February 2012 2012.

[391]    I. A. Letia and A. Groza, "Justifying argument and explanation in labelled argumentation C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 11-18, 30 August 2012 through 1 September 2012 2012.

[392]    I. A. Letia and O. Pop, "Individualized service selection with ontologies and rules C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 19-22, 30 August 2012 through 1 September 2012 2012.

[393]    I. A. Letia and R. R. Slavescu, "Logic-based reputation model in e-commerce simulation," Jasss, vol. 15, no. 3, 2012.

[394]    T. S. Letia, A. Astilean, and M. Hulea, "Analysis and synthesis of the Flexible Manufacturing System potential behaviors C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 14th IFAC Symposium on Information Control Problems in Manufacturing, INCOM'12, vol. 14, no. PART 1, pp. 248-253, 23 May 2012 through 25 May 2012 2012.

[395]    T. S. Letia and O. Cuibus, "Cooperative control for urban vehicle traffic C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 1st IFAC Conference on Embedded Systems, Computational Intelligence and Telematics in Control, CESCIT 2012, pp. 302-307, 3 April 2012 through 5 April 2012 2012.

[396]    T. S. Letia, M. Hulea, and O. Cuibus, "Controller synthesis method for discrete event systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 85-90, 24 May 2012 through 27 May 2012 2012.

[397]    S. E. Leucuta, "Drug delivery systems with modified release for systemic and biophase bioavailability," Current Clinical Pharmacology, vol. 7, no. 4, pp. 282-317, 2012.

[398]    Y. Lu et al., "Spin-orbit coupling effect by minority interface resonance states in single-crystal magnetic tunnel junctions," Physical Review B - Condensed Matter and Materials Physics, vol. 86, no. 18, 2012.

[399]    C. Ludusan and O. Lavialle, "Multifocus image fusion and denoising: A variational approach," Pattern Recognition Letters, vol. 33, no. 10, pp. 1388-1396, 2012.

[400]    C. Lungu and R. Potolea, "Designing software locking mechanisms against reverse engineering, using artificial neural networks C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 83-86, 30 August 2012 through 1 September 2012 2012.

[401]    N. Lungu and D. Popa, "Hyers-Ulam stability of a first order partial differential equation," Journal of Mathematical Analysis and Applications, vol. 385, no. 1, pp. 86-91, 2012.

[402]    N. Lungu and D. Popa, "On the hyers-ulam stability of a first order partial differential equation," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 77-82, 2012.

[403]    N. Lungu and I. A. Rus, "Gronwall inequalities via Picard operators," Analele Stiintifice ale Universitatii Al I Cuza din Iasi - Matematica, vol. 58, no. 2, pp. 269-278, 2012.

[404]    S. Lup, C. Munteanu, S. Baranowski, and L. Kane, "3D numerical simulation of the stirrer effect inside a reverberation chamber C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 672-675, 25 October 2012 through 27 October 2012 2012.

[405]    D. Lupea, A. Majdik, and G. Lazea, "Large scale mapping using submaps C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 412-416, 24 May 2012 through 27 May 2012 2012.

[406]    I. Lupea, "Considerations on the Helmholtz resonator simulation and experiment," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 13, no. 2, pp. 118-124, 2012.

[407]    C. Magureanu, I. Sosa, C. Negrutiu, and B. Heghes, "Mechanical properties and durability of ultra-high-performance concrete," ACI Materials Journal, vol. 109, no. 2, pp. 177-184, 2012.

[408]    A. Maier and M. Fulea, "Concepts integrating of quality and innovation, a key to business excellence," Quality - Access to Success, vol. 13, no. 131, pp. 77-81, 2012.

[409]    V. Maier, S. G. Pavel, I. Birou, H. G. Beleiu, and D. Lese, "Voltage slow variations and harmonics analysis in a LV distribution point C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 909-915, 25 October 2012 through 27 October 2012 2012.

[410]    V. Maier, S. G. Pavel, D. Leşe, and H. G. Beleiu, "Fundamentals of slow voltage variations analysis C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 275-281, 24 May 2012 through 26 May 2012 2012.

[411]    V. Maier, V. F. Polec, S. G. Pavel, and A. Filip, "Optimal analytical identification of the photometric curves for the indoor direct lighting luminaires C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 67-72, 24 May 2012 through 26 May 2012 2012.

[412]    A. Majdik, D. Lupea, G. Lazea, and L. Vajta, "Simultaneous localization and mapping using adaptive appearance based loop-closing detection C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 467-472, 24 May 2012 through 27 May 2012 2012.

[413]    R. Mǎluţan, P. G. Vilda, and M. Borda, "Combined unsupervised biclustering of microarray data C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 525-528, 3 July 2012 through 4 July 2012 2012.

[414]    A. G. Marchis, T. S. Moldovan, and A. M. Ioani, "The behaviour of an old representative reinforced concrete building subjected to abnormal loads C3 - Civil-Comp Proceedings," 11th International Conference on Computational Structures Technology, CST 2012, vol. 99, 4 September 2012 through 7 September 2012 2012.

[415]    D. Marconi, M. Pop, and A. V. Pop, "Normal state resistivity and excess of conductivity around the optimal doping of Bi-2212 thin films," Journal of Alloys and Compounds, vol. 513, pp. 586-591, 2012.

[416]    C. Marcu, S. Herle, L. Tamas, and G. Lazea, "Video based control of a 6 degrees-of-freedom serial manipulator C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 417-421, 24 May 2012 through 27 May 2012 2012.

[417]    I. L. Marcu and D. V. Banyai, "Fundamental research on hydraulic systems driven by alternating flow," Acta Polytechnica, vol. 52, no. 4, pp. 96-99, 2012.

[418]    T. Marcu, O. Nemes, M. Todea, D. Leordean, and C. Popa, "Characterization of hydroxyapatite coatings on different pretreated Ti6Al7Nb alloy substrates," Studia Universitatis Babes-Bolyai Chemia, no. 4, pp. 109-119, 2012.

[419]    T. Marcu, M. Todea, I. Gligor, P. Berce, and C. Popa, "Effect of surface conditioning on the flowability of Ti6Al7Nb powder for selective laser melting applications," Applied Surface Science, vol. 258, no. 7, pp. 3276-3282, 2012.

[420]    T. Marcu, M. Todea, L. Maines, D. Leordean, P. Berce, and C. Popa, "Metallurgical and mechanical characterisation of titanium based materials for endosseous applications obtained by selective laser melting," Powder Metallurgy, vol. 55, no. 4, pp. 309-314, 2012.

[421]    A. Mare and I. Bob, "Efficiency of the nano-packages based on ag-tio 2 in preserving the fresh cheese from cow milk and yogurt," Carpathian Journal of Food Science and Technology, vol. 4, no. 1, pp. 22-30, 2012.

[422]    S. Maria-Magdalena, L. Tiberiu, and C. Octavian, "Path finder algorithm used by distributed expert system for traffic control C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 608-611, 24 May 2012 through 27 May 2012 2012.

[423]    M. Marian, A. Peter, L. Mihaly-Cozmuta, and E. Bakatula, "Increased survival chances of the species quercus petraea in terms of pollution with Cd and Cu by using microbiota-bentonite systems," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 1, pp. 231-237, 2012.

[424]    F. Mariasiu, "Energy sources management and future automotive technologies: Environmental impact," International Journal of Energy Economics and Policy, vol. 2, no. 4, pp. 342-347, 2012.

[425]    T. F. Marinca, I. Chicina, and O. Isnard, "Synthesis, structural and magnetic characterization of nanocrystalline CuFe 2O 4 as obtained by a combined method reactive milling, heat treatment and ball milling," Ceramics International, vol. 38, no. 3, pp. 1951-1957, 2012.

[426]    T. F. Marinca, I. Chicinaś, and O. Isnard, "Influence of the heat treatment conditions on the formation of CuFe 2O 4 from mechanical milled precursors oxides," Journal of Thermal Analysis and Calorimetry, vol. 110, no. 1, pp. 301-307, 2012.

[427]    K. Márton, A. Suciu, C. Sǎcǎrea, and O. Creţ, "Generation and testing of random numbers for cryptographic applications," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 13, no. 4, pp. 368-377, 2012.

[428]    K. Marton, P. Toth, and A. Suciu, "Unpredictable random number generator based on the performance data helper interface C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 335-340, 26 September 2012 through 29 September 2012 2012.

[429]    A. O. Marza, I. Moldovean, and I. G. Tamovan, "An analysis of target materials influence on optical sensors performance C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 85-87, 25 October 2012 through 27 October 2012 2012.

[430]    O. Matei, P. C. Pop, and H. Vǎlean, "A robust approach to digit recognition in noisy environments C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 25th International Conference on Industrial Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2012, vol. 7345 LNAI, pp. 606-615, 9 June 2012 through 12 June 2012 2012.

[431]    A. R. Matyas, K. A. Biro, and D. Fodorean, "Multi-phase synchronous motor solution for steering applications," Progress in Electromagnetics Research, vol. 131, pp. 63-80, 2012.

[432]    A. Matyas et al., "Improved terahertz quantum cascade laser with variable height barriers," Journal of Applied Physics, vol. 111, no. 10, 2012.

[433]    C. Melenti and I. L. Melenti, "Ontology use for risk identification C3 - Proceedings - 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012," 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012, pp. 82-85, 25 October 2012 through 27 October 2012 2012.

[434]    A. Mesaros, M. Nasui, T. Petrisor Jr, L. Ciontea, and T. Petrisor, "Synthesis of YTaO 4:Nb thin films by chemical solution deposition," Journal of Alloys and Compounds, vol. 543, pp. 221-226, 2012.

[435]    A. Meslem, F. Bode, I. Nastase, and O. Martin, "Optimization of lobed perforated panel diffuser: Numerical study of orifice geometry," Modern Applied Science, vol. 6, no. 12, pp. 59-73, 2012.

[436]    A. Meslem, I. Nastase, F. Bode, and C. Beghein, "Optimization of a lobed perforated panel diffuser -A numerical study of orifice arrangement," International Journal of Ventilation, vol. 11, no. 3, pp. 255-270, 2012.

[437]    D. Miclǎuş, "The revision of some results for bernstein-stancu type operators," Carpathian Journal of Mathematics, vol. 28, no. 2, pp. 289-300, 2012.

[438]    C. Micu and E. Papp, "Equal coupling strength approach to spin precession effects concerning Rashba and Dresselhaus spin-orbit interactions in the presence of in-plane magnetic fields," Superlattices and Microstructures, vol. 51, no. 5, pp. 651-662, 2012.

[439]    C. Micu and D. Racolta, "The influence of the dynamic localization on the time dependent oscillations of currents on the one dimensional lattice C3 - AIP Conference Proceedings," Physics Conference TIM 2011, vol. 1472, pp. 70-76, 24 November 2011 through 27 November 2011 2012.

[440]    D. D. Micu, L. Czumbil, G. C. Christoforidis, A. Ceclan, and D. Ŝtet̂, "Evaluation of induced AC voltages in underground metallic pipeline," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 4, pp. 1133-1143, 2012.

[441]    D. D. Micu, L. Czumbil, G. C. Christoforidis, and T. Papadopoulos, "Semi-infinite integral implementation in the development steps of Interfstud electromagnetic interference software C3 - Proceedings of the Universities Power Engineering Conference," 2012 47th International Universities Power Engineering Conference, UPEC 2012, 4 September 2012 through 7 September 2012 2012.

[442]    D. D. Micu, L. Czumbil, G. Christoforidis, and E. Simion, "Neural networks applied in electromagnetic interference problems," Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, vol. 57, no. 2, pp. 162-171, 2012.

[443]    D. D. Micu, L. Czumbil, M. Prša, and K. Kasaš-Lažetić, "Interfstud electromagnetic interference software: An accurate evaluation of current distribution in soil and in underground pipelines C3 - IEEE International Symposium on Electromagnetic Compatibility," International Symposium on Electromagnetic Compatibility, EMC EUROPE 2012, 17 September 2012 through 21 September 2012 2012.

[444]    C. Mihali et al., "Trace element transfer from soil to vegetables around the lead smelter in Baia Mare, NW Romania," Journal of Food, Agriculture and Environment, vol. 10, no. 1, pp. 828-834, 2012.

[445]    A. Mihaly Cozmuta, L. Bretan, L. Mihaly Cozmuta, C. Nicula, and A. Peter, "Lead traceability along soil-melliferous flora-bee family-apiary products chain," Journal of Environmental Monitoring, vol. 14, no. 6, pp. 1622-1630, 2012.

[446]    L. Mihaly Cozmuta, A. Mihaly Cozmuta, A. Peter, C. Nicula, E. Bakatula Nsimba, and H. Tutu, "The influence of pH on the adsorption of lead by Na-clinoptilolite: Kinetic and equilibrium studies," Water SA, vol. 38, no. 2, pp. 269-278, 2012.

[447]    V. G. Mihucz et al., "Impact of two iron(III) chelators on the iron, cadmium, lead and nickel accumulation in poplar grown under heavy metal stress in hydroponics," Journal of Plant Physiology, vol. 169, no. 6, pp. 561-566, 2012.

[448]    A. Millien, M. L. Dragomir, L. Wendling, C. Petit, and M. Iliescu, "Geogrid interlayer performance in pavements: Tensile-bending test for crack propagation," RILEM Bookseries, vol. 4, pp. 1209-1218, 2012.

[449]    A. Mircea, "Main aspects concerning PCB manufacturing optimization," Circuit World, vol. 38, no. 2, pp. 75-82, 2012.

[450]    A. T. Mircea, "Fabrication technology-related cracking of prestressed concrete elements C3 - Concrc - Proceedings of Concrete Solutions, 4th International Conference on Concrete Repair," 4th International Conference on Concrete Repair, pp. 91-94, 26 September 2011 through 28 September 2011 2012.

[451]    D. Mircescu, A. Astilean, and O. Ghiran, "Complex automation system of a low power hydroplant C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 616-620, 24 May 2012 through 27 May 2012 2012.

[452]    A. Miron, M. Chindriş, and A. Cziker, "Impact of unbalance in harmonic polluted power networks C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 674-678, 20 June 2012 through 22 June 2012 2012.

[453]    O. Miron, D. D. Micu, and L. Czumbil, "Stability study comparison of a MNA matrix system in PEEC method C3 - Proceedings of the Universities Power Engineering Conference," 2012 47th International Universities Power Engineering Conference, UPEC 2012, 4 September 2012 through 7 September 2012 2012.

[454]    R. Miron and T. Leţia, "Fuzzy logic method for partial fingerprint recognition C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 602-607, 24 May 2012 through 27 May 2012 2012.

[455]    A. I. Mitrea, "Double condensation of singularities for product-quadrature formulas with differentiable functions," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 83-91, 2012.

[456]    A. I. Mitrea et al., "Iterative methods for obtaining energy-minimizing parametric snakes with applications to medical imaging," Computational and Mathematical Methods in Medicine, vol. 2012, 2012.

[457]    A. I. Mitrea, O. M. Gurzau, and P. Mitrea, "Finite difference based algorithms for optimal snakes used in medical diagnosis C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 491-496, 24 May 2012 through 27 May 2012 2012.

[458]    D. Mitrea et al., "Abdominal tumor characterization and recognition using superior-order cooccurrence matrices, based on ultrasound images," Computational and Mathematical Methods in Medicine, vol. 2012, 2012.

[459]    D. Mitrea, S. Nedevschi, and R. Badea, "The role of the multiresolution textural features in improving the characterization and recognition of the liver tumors, based on ultrasound images C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 192-199, 26 September 2012 through 29 September 2012 2012.

[460]    D. Mitrea, S. Nedevschi, M. Socaciu, and R. Badea, "The role of the superior order GLCM in the characterization and recognition of the liver tumors from ultrasound images," Radioengineering, vol. 21, no. 1, pp. 79-85, 2012.

[461]    B. Mocan, "Performance planing of arc welding robotic systems using specific tools for quality planning and systematic introduction of innovation i. Identifying the arc welding robotic system performance characteristics," Quality - Access to Success, vol. 13, no. 127, pp. 80-85, 2012.

[462]    B. Mocan, "Performance planning of arc welding robotic systems using specific tools for quality planning and systematic introduction of innovation: IIa. Quality planning of robotic and welding systems using QFD method," Quality - Access to Success, vol. 13, no. 128, pp. 82-88, 2012.

[463]    B. Mocan, "Performance planning of arc welding robotic systems using specific tools for quality planning and systematic introduction of innovation: IIb. quality planning of clamping (fixture) system and robot's path using QFD method," Quality - Access to Success, vol. 13, no. 129, pp. 91-97, 2012.

[464]    D. Moga, D. Petreus, and N. Stroia, "A low cost architecture for remote control and monitoring of greenhouse fields C3 - Proceedings of the 2012 7th IEEE Conference on Industrial Electronics and Applications, ICIEA 2012," 2012 7th IEEE Conference on Industrial Electronics and Applications, ICIEA 2012, pp. 1940-1944, 18 July 2012 through 20 July 2012 2012.

[465]    L. Moga and I. Moga, "Multi-criteria analysis system for sustainable buildings in Romania C3 - 10th International Conference on Healthy Buildings 2012," 10th International Conference on Healthy Buildings 2012, vol. 1, pp. 465-466, 8 July 2012 through 12 July 2012 2012.

[466]    D. Moldovan, G. Copil, I. Salomie, I. Anghel, and T. Cioara, "A membrane computing inspired packing solution and its application to service center workload distribution C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 281-288, 30 August 2012 through 1 September 2012 2012.

[467]    M. M. Moldovan, "Strict double diagonal dominance in Euclidean Jordan algebras," Linear Algebra and Its Applications, vol. 436, no. 7, pp. 2513-2523, 2012.

[468]    V. Moldovan, I. Vida-Simiti, N. Jumate, G. Thalmaier, N. Sechel, and V. Petrescu, "Studies and researches on the obtaining of sintered gradual porous structures by irregular nickel powders sedimentation C3 - Solid State Phenomena," 4th International Conference on Advanced Materials and Structures, AMS 2011, vol. 188, pp. 388-394, 27 October 2011 through 28 October 2011 2012.

[469]    A. Molea, V. Popescu, and N. A. Rowson, "Effects of I-doping content on the structural, optical and photocatalytic activity of TiO 2 nanocrystalline powders," Powder Technology, vol. 230, pp. 203-211, 2012.

[470]    I. R. Morar and I. Nascu, "Model simplification of an unmanned aerial vehicle C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 591-596, 24 May 2012 through 27 May 2012 2012.

[471]    X. Morar, "3D reconstruction of chiup vessels based on generatrix and director circle," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 503-508, 2012.

[472]    X. Morar and D. Popescu, "Automatic identification of inscriptions on historical artifacts using the reverse engineering tools and techniques," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 499-502, 2012.

[473]    R. B. Mos, M. Nasui, T. Petrisor Jr, M. S. Gabor, R. A. Varga, and L. Ciontea, "Synthesis, crystal structure and thermal decomposition of Zr 6O 4(OH) 4(CH 3CH 2COO) 12," Journal of Analytical and Applied Pyrolysis, vol. 97, pp. 137-142, 2012.

[474]    A. Muntean and C. Mǎgureanu, "Aspects regarding flexural behaviour of high strength reinforced concrete beams C3 - Proceedings of the 9th fib International PhD Symposium in Civil Engineering," 9th fib International PhD Symposium in Civil Engineering, pp. 35-42, 22 July 2012 through 25 July 2012 2012.

[475]    D. F. Muntean, D. Ristoiu, G. Arghir, R. F. Campean, and I. Petean, "Iron hydroxides occurrence in winter air particulate matters suspensions in Cluj -Napoca, Romania," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 3, pp. 175-182, 2012.

[476]    I. L. Muntean and L. M. Dansorean, "Searching simulation scenarios on the grid with ELSIGExplorer C3 - Proceedings - 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011," 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011, pp. 261-267, 26 September 2011 through 29 September 2011 2012.

[477]    I. L. Muntean and M. Joldos, "Grid framework for parallel investigations of spiking neural microcircuits C3 - Proceedings - 2012 11th International Symposium on Parallel and Distributed Computing, ISPDC 2012," 2012 11th International Symposium on Parallel and Distributed Computing, ISPDC 2012, pp. 219-226, 25 June 2012 through 29 June 2012 2012.

[478]    I. L. Muntean and M. Joldos, "Simulation of biological neural microcircuits on multi-core systems C3 - Proceedings - 2012 6th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2012," 2012 6th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2012, pp. 449-454, 4 July 2012 through 6 July 2012 2012.

[479]    I. L. Muntean, M. Joldos, and R. I. Peter, "Distributed dynamics analysis of spiking neural network simulations C3 - Proceedings - 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012," 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012, pp. 45-48, 25 October 2012 through 27 October 2012 2012.

[480]    I. L. Muntean, R. I. Peter, and M. Joldos, "Dynamics analysis of parallel simulations of the spike response model C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 481-486, 26 September 2012 through 29 September 2012 2012.

[481]    I. L. Muntean, B. Rotaru, R. Suharoschi, and C. Iuga, "Experiences in designing a distributed service-oriented platform for in-silico biomarker discovery and validation C3 - IEEE 12th International Conference on BioInformatics and BioEngineering, BIBE 2012," 12th IEEE International Conference on BioInformatics and BioEngineering, BIBE 2012, pp. 74-79, 11 November 2012 through 13 November 2012 2012.

[482]    I. Muntean, M. L. Unguresan, A. Savu, and M. Abrudean, "Modeling and composition estimation of an isotopic distillation column C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 109-113, 24 May 2012 through 27 May 2012 2012.

[483]    M. Muntean, I. Ileana, and H. Valean, "Improving classification with boundary instances multiplier algorithm based on IF-THEN rules C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 272-277, 24 May 2012 through 27 May 2012 2012.

[484]    M. Muntean and H. Välean, "Wrappers for web access logs feature selection C3 - ACM International Conference Proceeding Series," 2nd International Conference on Web Intelligence, Mining and Semantics, WIMS 2012, 13 June 2012 through 15 June 2012 2012.

[485]    C. Munteanu et al., "Electromagnetic field model for the numerical computation of voltages induced on buried pipelines by high voltage overhead power lines," EPJ Applied Physics, vol. 58, no. 3, 2012.

[486]    C. Munteanu, L. T. Pop, V. Tapa, C. Hangea, T. Gutiu, and S. Lup, "Study of the magnetic field distribution inside very high voltage substations C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 660-663, 25 October 2012 through 27 October 2012 2012.

[487]    C. Munteanu, V. Topa, G. Mates, M. Purcar, A. Racasan, and I. T. Pop, "Analysis of the electromagnetic interferences between overhead power lines and buried pipelines C3 - IEEE International Symposium on Electromagnetic Compatibility," International Symposium on Electromagnetic Compatibility, EMC EUROPE 2012, 17 September 2012 through 21 September 2012 2012.

[488]    L. Munteanu, C. Brisan, V. Chiroiu, and S. Donescu, "On the compression viewed as a geometric transformation," Computers, Materials and Continua, vol. 31, no. 2, pp. 127-146, 2012.

[489]    M. Murar and S. Brad, "Providing configurability and plug-and-play capability to simple sensors: A step towards smart sensors for smart factories C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 597-606, 6 June 2012 through 8 June 2012 2012.

[490]    C. I. Muresan, R. Both, C. M. Ionescu, and E. H. Dulf, "Fractional order control for the temperature loop in a chemical reactor C3 - 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012 - Joint Conference Proceedings," 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012, 12 October 2012 through 14 October 2012 2012.

[491]    C. I. Muresan, E. H. Dulf, and C. Ionescu, "Multivariable fractional order PI controller for time delay processes C3 - Proceedings of the IASTED International Conference on Engineering and Applied Science, EAS 2012," IASTED International Conference on Engineering and Applied Science, EAS 2012, pp. 115-121, 27 December 2012 through 29 December 2012 2012.

[492]    M. Muresan and D. Pitica, "Software in the Loop environment reliability for testing embedded code C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 325-328, 25 October 2012 through 28 October 2012 2012.

[493]    R. Muresan, E. Riti-Mihoc, C. Prica, and M. Bodea, "Improving mechanical properties of sintered wolfram based alloy with liquid phase trough controlled cooling parameters," Archives of Metallurgy and Materials, vol. 57, no. 1, pp. 87-92, 2012.

[494]    V. Mureşan, "On the solutions of a second order functional-differential equation," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 111-116, 2012.

[495]    V. Mureşan and M. Abrudean, "The control of the billets heating process in a furnace with rotary hearth C3 - IFAC Proceedings Volumes (IFAC-PapersOnline)," 8th Power Plant and Power System Control Symposium, PPPSC 2012, vol. 8, no. PART 1, pp. 735-740, 2 September 2012 through 5 September 2012 2012.

[496]    V. Mureşan, M. Abrudean, M. L. Ungureşan, and T. Coloşi, "Control of the blunting process of the residual water from a foundry C3 - SACI 2012 - 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2012, pp. 29-34, 24 May 2012 through 26 May 2012 2012.

[497]    V. Muresan, M. Abrudean, M. L. Unguresan, and T. Colosi, "Modeling of the blunting process of the residual water from a foundry C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 166-171, 24 May 2012 through 27 May 2012 2012.

[498]    V. Muresan, B. Radu, D. Radu, and L. Pacurar, "A detached house simulation using the international building physics toolbox in Matlab\Simulink C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 567-574, 6 June 2012 through 8 June 2012 2012.

[499]    S. B. Nagesh, Z. Lendek, A. A. Khalate, and R. Babuška, "Adaptive fuzzy observer and robust controller for a 2-DOF robot arm C3 - IEEE International Conference on Fuzzy Systems," 2012 IEEE International Conference on Fuzzy Systems, FUZZ 2012, 10 June 2012 through 15 June 2012 2012.

[500]    R. Nagy, N. Gaskó, R. I. Lung, and D. Dumitrescu, "Between selfishness and altruism: Fuzzy Nash-Berge-Zhukovskii equilibrium C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 12th International Conference on Parallel Problem Solving from Nature, PPSN 2012, vol. 7491 LNCS, no. PART 1, pp. 500-509, 1 September 2012 through 5 September 2012 2012.

[501]    Z. Nagy, M. Cristutiu, and Z. Kiss, "Local and global stability analysis of a large free span steel roof structure C3 - Civil-Comp Proceedings," 11th International Conference on Computational Structures Technology, CST 2012, vol. 99, 4 September 2012 through 7 September 2012 2012.

[502]    Z. Nagy, L. Fülöp, and A. Talja, "Are we too capitalists for a comfortable life? business models for future and existing flat building administration," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 205-210, 2012.

[503]    Z. Nagy and P. Pernes, "A parametric study of cold-formed steel bolted joints in pitch-roof portal frames C3 - Civil-Comp Proceedings," 11th International Conference on Computational Structures Technology, CST 2012, vol. 99, 4 September 2012 through 7 September 2012 2012.

[504]    R. K. Nallamothu et al., "Computational fluid dynamic analysis of the regurgitant flow in a bileaflet mechanical heart valve C3 - ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers," 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, pp. 7982-7989, 10 September 2012 through 14 September 2012 2012.

[505]    I. Nascu, C. M. Ionescu, and R. De Keyser, "Adaptive EPSAC predictive control of the hypnotic component in anesthesia C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 103-108, 24 May 2012 through 27 May 2012 2012.

[506]    M. Nasui, C. Bogatan, L. Ciontea, and T. Petrisor, "Synthesis, crystal structure modeling and thermal decomposition of yttrium propionate [Y 2(CH 3CH 2COO) 6· H 2O]·3.5H 2O," Journal of Analytical and Applied Pyrolysis, vol. 97, pp. 88-93, 2012.

[507]    A. Neag, V. Favier, R. Bigot, and M. Pop, "Microstructure and flow behaviour during backward extrusion of semi-solid 7075 aluminium alloy," Journal of Materials Processing Technology, vol. 212, no. 7, pp. 1472-1480, 2012.

[508]    A. Neag, V. Favier, M. Pop, E. Becker, and R. Bigot, "Effect of experimental conditions on 7075 aluminium response during thixoextrusion C3 - Key Engineering Materials," 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012, vol. 504-506, pp. 345-350, 14 March 2012 through 16 March 2012 2012.

[509]    A. O. Neaga, C. Festila, E. H. Dulf, R. Both, T. Szelitzky, and M. Gligan, "A simplified mathematical model of the cryogenic distillation with application to the ( 13C) isotope separation column C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 189-192, 29 September 2011 through 1 October 2011 2012.

[510]    A. O. Neaga et al., "Operational model of the 13C isotope separation column C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 96-102, 24 May 2012 through 27 May 2012 2012.

[511]    A. O. Neaga et al., "Electrical power monitoring and control in 13C isotope separation column boiler C3 - SACI 2012 - 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, Proceedings," 7th IEEE International Symposium on Applied Computational Intelligence and Informatics, SACI 2012, pp. 13-18, 24 May 2012 through 26 May 2012 2012.

[512]    M. I. Neagu, G. D. Moiş, and L. C. Miclea, "On-line error detection for tuning dynamic frequency scaling C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 290-295, 24 May 2012 through 27 May 2012 2012.

[513]    M. Neagu and L. Miclea, "Modified berger codes for on-line DRAM repair strategies C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 296-301, 24 May 2012 through 27 May 2012 2012.

[514]    B. V. Neamţu, O. Geoffroy, I. Chicinaş, and O. Isnard, "AC magnetic properties of the soft magnetic composites based on Supermalloy nanocrystalline powder prepared by mechanical alloying," Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 177, no. 9, pp. 661-665, 2012.

[515]    C. Neamţu, I. Badiu, P. Pupezǎ, and R. Ghinea, "Using catia V5 for developing a parametric database for pottery," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 509-512, 2012.

[516]    C. Neamţu, Z. Buna, R. Mateescu, F. Popişter, and X. Morar, "CAD software in 3D reconstructions of ancient world," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 513-518, 2012.

[517]    C. Neamţu, D. Hurgoiu, S. Popescu, M. Dragomir, and H. Osanna, "Training in coordinate measurement using 3D virtual instruments," Measurement: Journal of the International Measurement Confederation, vol. 45, no. 10, pp. 2346-2358, 2012.

[518]    M. Nedelcu, "GBT-based buckling mode decomposition from finite element analysis of thin-walled members," Thin-Walled Structures, vol. 54, pp. 156-163, 2012.

[519]    M. Nedelcu, N. Chira, A. G. Popa, and H. L. Cucu, "GBT-based buckling mode identification from finite element analysis of thin-walled members C3 - ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers," 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, pp. 1291-1304, 10 September 2012 through 14 September 2012 2012.

[520]    S. Nedevschi, I. R. Peter, and A. Mandrut, "PCA type algorithm applied in face recognition C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 167-171, 30 August 2012 through 1 September 2012 2012.

[521]    R. J. Nedoushan, M. Farzin, M. Mashayekhi, and D. Banabic, "A microstructure-based constitutive model for superplastic forming," Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 43, no. 11, pp. 4266-4280, 2012.

[522]    A. C. Negrea, M. Imecs, I. L. Incze, A. Pop, and C. Szabo, "Error compensation methods in speed identification using incremental encoder C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 441-445, 25 October 2012 through 27 October 2012 2012.

[523]    C. A. Negrea, I. I. Incze, M. Imecs, A. V. Pop, and C. Szabo, "An improved speed identification method using incremental encoder in electric drives C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 536-540, 24 May 2012 through 27 May 2012 2012.

[524]    I. Negrean, C. Schonstein, Z. Szoke, K. Kacso, and A. V. Duca, "Dynamic modeling of the hybrid robots structures C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 449-454, 24 May 2012 through 27 May 2012 2012.

[525]    I. Nencu, L. Vlase, V. Istudor, L. E. Duţu, and C. E. Gîrd, "Preliminary research regarding the therapeutic uses of Urtica dioica L. note I. The polyphenols evaluation," Farmacia, vol. 60, no. 4, pp. 493-500, 2012.

[526]    M. P. Nicoreac and J. C. D. Hoenderkamp, "Natural periods of vibration of outrigger braced shear walls C3 - ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers," 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, pp. 7493-7508, 10 September 2012 through 14 September 2012 2012.

[527]    M. Nicoreac and J. C. D. Hoenderkamp, "Periods of vibration of braced frames with outriggers C3 - Procedia Engineering," 23rd Czech and Slovak International Conference on Steel Structures and Bridges 2012, vol. 40, pp. 298-303, 26 September 2012 through 28 September 2012 2012.

[528]    C. Nicula, A. Buie, and O. Bran, "Accumulation of chlorophyll and carotenoids pigments in plants grown under artificial light," Carpathian Journal of Food Science and Technology, vol. 4, no. 1, pp. 37-45, 2012.

[529]    C. Nicula, D. Lungu, A. Peter, A. Mihaly-Cozmuta, and L. Mihaly-Cozmuta, "Curd cheese storaged in modified packaging with extract of garlic and thyme: Variation of some physico-chemical parameters," Carpathian Journal of Food Science and Technology, vol. 4, no. 2, pp. 1-8, 2012.

[530]    D. Nikolić, R. C. Mureşan, W. Feng, and W. Singer, "Scaled correlation analysis: A better way to compute a cross-correlogram," European Journal of Neuroscience, vol. 35, no. 5, pp. 742-762, 2012.

[531]    T. M. Olimpiu, C. Claudiu, M. Dan, and C. Beniamin, "Synchronous drive omnidirectional minirobot C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 294-301, 6 June 2012 through 8 June 2012 2012.

[532]    E. D. Olteanu et al., "Photochemoprotective effect of calluna vulgaris extract on skin exposed to multiple doses of ultraviolet b in SKH-1 hairless mice," Journal of Environmental Pathology, Toxicology and Oncology, vol. 31, no. 3, pp. 233-243, 2012.

[533]    G. Oncea, G. Toderean, and O. Buza, "Temperature control system for infrared soldering C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 564-568, 24 May 2012 through 27 May 2012 2012.

[534]    O. L. Onet, D. Paire, A. Gaillard, B. Blunier, and R. Tirnovan, "Distributed control strategy for a grid-connected hybrid system with batteries and renewable sources C3 - IEEE PES Innovative Smart Grid Technologies Conference Europe," 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe, ISGT Europe 2012, 14 October 2012 through 17 October 2012 2012.

[535]    O. Oniga et al., "Synthesis and antimicrobial activity of some new 2-hydrazone-thiazoline-4- ones," Farmacia, vol. 60, no. 6, pp. 785-797, 2012.

[536]    S. Oniga, J. Vegh, and I. Orha, "Intelligent human-machine interface using hand gestures recognition C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 559-563, 24 May 2012 through 27 May 2012 2012.

[537]    O. Onija et al., "Preparation and characterization of urea-oxalic acid solid form C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 35-38, 29 September 2011 through 1 October 2011 2012.

[538]    C. A. Oprea, L. Szabó, and C. S. Marţiş, "Linear permanent magnet Electric Generator for Free Piston Engine applications C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 691-696, 2 September 2012 through 5 September 2012 2012.

[539]    C. Oprisa, A. Colesa, and I. Ignat, "A metric for evaluating the usability of file systems C3 - Proceedings - 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012," 14th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2012, pp. 179-186, 26 September 2012 through 29 September 2012 2012.

[540]    R. L. Orban, V. R. Constantinescu, and M. Orban, "Fusion tungsten carbide powder for matrix of diamond drilling tools C3 - Proceedings of the International Euro Powder Metallurgy Congress and Exhibition, Euro PM 2012," European International Powder Metallurgy Congress and Exhibition, Euro PM 2012, vol. 2, 16 September 2012 through 19 September 2012 2012.

[541]    A. Ordace, C. M. Ionescu, T. P. W. Vannecke, I. P. E. Volcke, I. Nascu, and R. De Keyser, "Predictive control of anaerobic digestion of wastewater sludge. A feasibility study C3 - 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012 - Joint Conference Proceedings," 2012 16th International Conference on System Theory, Control and Computing, ICSTCC 2012, 12 October 2012 through 14 October 2012 2012.

[542]    M. Ordean and M. Giurgiu, "Towards securing client-server connections against man-in-the-middle attacks C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 127-130, 15 November 2012 through 16 November 2012 2012.

[543]    M. Ordean and K. Renaud, "Catch me if you can: Using self-camouflaging images to strengthen graphical passwords C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 309-315, 30 August 2012 through 1 September 2012 2012.

[544]    A. R. Orghidan, C. M. Gordan, D. A. Vlaicu, and B. J. Salvi, "Projector-camera calibration for 3D reconstruction using vanishing points C3 - 2012 International Conference on 3D Imaging, IC3D 2012 - Proceedings," 2012 2nd International Conference on 3D Imaging, IC3D 2012, 3 December 2012 through 5 December 2012 2012.

[545]    R. Orghidan, J. Salvi, M. Gordan, and B. Orza, "Camera calibration using two or three vanishing points C3 - 2012 Federated Conference on Computer Science and Information Systems, FedCSIS 2012," 2012 Federated Conference on Computer Science and Information Systems, FedCSIS 2012, pp. 123-130, 9 September 2012 through 12 September 2012 2012.

[546]    I. Orha and S. Oniga, "Current distortions compensation method for frequency converters C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 105-109, 25 October 2012 through 28 October 2012 2012.

[547]    A. Oros, M. Topa, M. Neag, M. Rafaila, and G. Pelz, "Application-oriented robustness optimization based on metamodels C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 37-41, 25 October 2012 through 28 October 2012 2012.

[548]    V. Oros, M. Coman, and D. Gusat, "Polluted soil - modelling and rehabilitation a case study in bistrita-nasaud county, Romania C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 4, pp. 193-198, 17 June 2012 through 23 June 2012 2012.

[549]    S. Ovidiu and B. Gabriel, "Considerations in making topographic support network in the underground C3 - 12th International Multidisciplinary Scientific GeoConference and EXPO - Modern Management of Mine Producing, Geology and Environmental Protection, SGEM 2012," 12th International Multidisciplinary Scientific GeoConference and EXPO, SGEM 2012, vol. 2, pp. 701-706, 17 June 2012 through 23 June 2012 2012.

[550]    C. Pacurar, V. Topa, C. Munteanu, A. Racasan, and C. Hebedean, "Spiral inductors inductance computation and layout optimization C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 699-704, 25 October 2012 through 27 October 2012 2012.

[551]    C. Pacurar, V. Topa, A. Racasan, and C. Munteanu, "Inductance calculation and layout optimization for planar spiral inductors C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 225-232, 24 May 2012 through 26 May 2012 2012.

[552]    R. Pǎcurar, A. Pǎcurar, P. Berce, N. Bâlc, and O. Nemeş, "Porosity change by resin impregnation in structures obtained by selective laser sintering technology," Studia Universitatis Babes-Bolyai Chemia, no. 3, pp. 5-13, 2012.

[553]    R. Pǎcurari and C. Brişan, "Optimal actuation mechanisms for a low-cost road simulator," Advanced Science Letters, vol. 14, no. 1, pp. 90-94, 2012.

[554]    E. Pǎdurariu, K. Hameyer, L. E. Someşan, I. A. Viorel, and C. Marţiş, "A simple analytical model of a permanent magnet transverse flux motor with a particular disk rotor C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 641-646, 24 May 2012 through 26 May 2012 2012.

[555]    E. Padurariu, L. E. Somesan, I. A. Viorel, and L. Szabo, "Large power permanent magnet transverse flux motor, steady-state and dynamic behavior C3 - Proceedings of 9th International Conference, ELEKTRO 2012," 9th International Conference on ELEKTRO 2012, pp. 221-224, 21 May 2012 through 22 May 2012 2012.

[556]    A. M. Pantea, G. Aroquiadassou, A. M. Mabwe, and C. S. Marţiş, "Real-time sensorless vector control of induction machines using an FPGA board C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 243-248, 20 June 2012 through 22 June 2012 2012.

[557]    C. D. Pantilie and S. Nedevschi, "Optimizing the census transform on CUDA enabled GPUs C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 201-207, 30 August 2012 through 1 September 2012 2012.

[558]    C. D. Pantilie and S. Nedevschi, "SORT-SGM: Subpixel optimized real-time semiglobal matching for intelligent vehicles," IEEE Transactions on Vehicular Technology, vol. 61, no. 3, pp. 1032-1042, 2012.

[559]    L. Paraianu, S. Dan Comsa, I. Nicodim, I. Ciobanu, and D. Banabic, "Effect of the constitutive law on the accuracy of prediction of the forming limit curves C3 - Key Engineering Materials," 15th Conference of the European Scientific Association on Material Forming, ESAFORM 2012, vol. 504-506, pp. 77-82, 14 March 2012 through 16 March 2012 2012.

[560]    B. Parv, R. Hulea, and R. Zoicas, "Comparative study of wind effects on tall buildings using international codes and CFD C3 - ECCOMAS 2012 - European Congress on Computational Methods in Applied Sciences and Engineering, e-Book Full Papers," 6th European Congress on Computational Methods in Applied Sciences and Engineering, ECCOMAS 2012, pp. 6857-6866, 10 September 2012 through 14 September 2012 2012.

[561]    A. E. Parvu, S. Talu, M. Talu, S. Giovanzana, and C. Craciun, "Fractal analysis of healthy human periodontium," Annals of the Romanian Society for Cell Biology, vol. 17, no. 1, pp. 80-84, 2012.

[562]    V. Paşcalau et al., "The alginate/k-carrageenan ratio's influence on the properties of the cross-linked composite films," Journal of Alloys and Compounds, vol. 536, no. SUPPL.1, pp. S418-S423, 2012.

[563]    P. Pascuta and E. Culea, "Effect of gadolinium ions on the structure and magnetic properties of zinc-borate glasses and glass ceramics," Journal of Materials Science, vol. 47, no. 5, pp. 2345-2351, 2012.

[564]    P. Pascuta, A. Vladescu, G. Borodi, E. Culea, and R. Tetean, "Synthesis, structural and magnetic characterization of iron-zinc-borate glass ceramics containing nanocrystalline zinc ferrite," Journal of Materials Science: Materials in Electronics, vol. 23, no. 2, pp. 582-588, 2012.

[565]    A. E. I. Pastrav, E. Puschita, and T. Palade, "HCCA support in IEEE 802.11 networks QoS and QoE performance evaluation C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 139-142, 15 November 2012 through 16 November 2012 2012.

[566]    T. Patarau, D. Petreus, R. Etz, M. Cirstea, and S. Daraban, "Digital control of bidirectional DC-DC converters in Smart Grids C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 1553-1558, 24 May 2012 through 26 May 2012 2012.

[567]    A. G. Perde, D. V. Bonca, A. Lang, M. Rusu, C. Nunu, and L. Morar, "Assessment and quality assurance in educational institutions," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 219-222, 2012.

[568]    A. E. Pereanu, I. Tomuţa, and S. E. Leucuţa, "Formulation of bioadhesive hydrophilic matrix tablets with famotidine using different combinations of polymers," Farmacia, vol. 60, no. 4, pp. 457-474, 2012.

[569]    B. Pernici et al., "Setting energy efficiency goals in data centers: The GAMES approach C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 1st International Workshop on Energy Efficient Data Centers, E2DC 2012, vol. 7396 LNCS, pp. 1-12, 8 May 2012 through 8 May 2012 2012.

[570]    D. Petcu et al., "Experiences in building a Grid-based platform to serve Earth observation training activities," Computer Standards and Interfaces, vol. 34, no. 6, pp. 493-508, 2012.

[571]    A. Peter et al., "Dual efficiency of nano-structured TiO 2/zeolyte systems in removal of copper (II) and lead (II) ions from aqueous solution under visible light C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 139-143, 29 September 2011 through 1 October 2011 2012.

[572]    A. Peter, L. Mihaly-Cozmuta, A. Mihaly-Cozmuta, C. Nicula, E. Indrea, and H. Tutu, "Calcium- and ammonium ion-modification of zeolite amendments affects the metal-uptake of Hieracium piloselloides in a dose-dependent way," Journal of Environmental Monitoring, vol. 14, no. 10, pp. 2807-2814, 2012.

[573]    A. Peter, C. Nicula, A. Mihaly-Cozmuta, L. Mihaly-Cozmuta, and E. Indrea, "Chemical and sensory changes of different dairy products during storage in packages containing nanocrystallised TiO 2," International Journal of Food Science and Technology, vol. 47, no. 7, pp. 1448-1456, 2012.

[574]    A. Peter, L. Roatis, C. Nicula, A. Mihaly-Cozmuta, and L. Mihaly-Cozmuta, "Combined use of paper or ldpe and natural extracts from satureja hortensis and allium sativum for the preservation of the summer salame," Carpathian Journal of Food Science and Technology, vol. 4, no. 2, pp. 18-27, 2012.

[575]    D. Petreus, S. Daraban, I. Ciocan, T. Patarau, and C. Morel, "Single-stage low cost grid connected inverter in photovoltaic energy applications C3 - 15th International Power Electronics and Motion Control Conference and Exposition, EPE-PEMC 2012 ECCE Europe," 15th International Power Electronics and Motion Control Conference and Exposition, EPE-PEMC 2012 ECCE Europe, pp. DS3d.51-DS3d.56, 4 September 2012 through 6 September 2012 2012.

[576]    M. A. Petric and B. Zlatanov, "Best proximity points and fixed points for p-summing maps," Fixed Point Theory and Applications, vol. 2012, 2012.

[577]    T. Petrisor et al., "Magnetic pinning effects of epitaxial La xSr 1-xMnO 3 nanostructured thin films on YBa 2Cu 3O 7-δ layers," Journal of Applied Physics, vol. 112, no. 5, 2012.

[578]    A. Petrovan, M. Lobonţiu, and R. N. Sandor, "Product development ontology. a case study," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 393-398, 2012.

[579]    G. Petrovay and C. Mircea, "Assessment of fire damage of an old RC structure C3 - Concrc - Proceedings of Concrete Solutions, 4th International Conference on Concrete Repair," 4th International Conference on Concrete Repair, pp. 511-516, 26 September 2011 through 28 September 2011 2012.

[580]    A. Petruş, C. Berekmeri, and D. Hedesiu, "Stakeholders identification and analysis processes in the project life cycle stages," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 223-228, 2012.

[581]    V. Petrus, A. C. Pop, C. S. Martis, V. Iancu, and J. Gyselinck, "Direct instantaneous torque control of SRMs versus current profiling - Comparison regarding torque ripple and copper losses C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 366-372, 24 May 2012 through 26 May 2012 2012.

[582]    A. Pintea and G. Tarta, "Comparison between the linear and nonlinear responses of cable structures II - Dynamic loading C3 - Procedia Engineering," 23rd Czech and Slovak International Conference on Steel Structures and Bridges 2012, vol. 40, pp. 375-380, 26 September 2012 through 28 September 2012 2012.

[583]    C. M. Pintea, G. C. Crişan, and M. Manea, "Parallel ACO with a ring neighborhood for dynamic TSP," Journal of Information Technology Research, vol. 5, no. 4, pp. 1-13, 2012.

[584]    C. M. Pintea, C. Pascan, and M. Hajdu-Macelaru, "Comparing several heuristics for a packing problem," International Journal of Advanced Intelligence Paradigms, vol. 4, no. 3-4, pp. 268-277, 2012.

[585]    I. Piscan, N. Predincea, and N. Pop, "Finite element analysis and design exploration of a bolted joint C3 - Advanced Materials Research," 2012 2nd International Conference on Advanced Material Research, ICAMR 2012, vol. 463-464, pp. 1601-1604, 7 January 2012 through 8 January 2012 2012.

[586]    A. Pisla, T. Itul, D. Pisla, and A. Szilaghyi, "Considerations upon the influence of manufacturing and assembly errors on the kinematic and dynamic behavior in a flight simulator stewart-gough platform C3 - Mechanisms and Machine Science," 1st Workshop on Mechanisms, Transmissions and Applications, MeTrApp 2011, vol. 3, pp. 215-223, 6 October 2011 through 8 October 2011 2012.

[587]    D. Pisla, B. Gherman, C. Vaida, and N. Plitea, "Kinematic modelling of a 5-DOF hybrid parallel robot for laparoscopic surgery," Robotica, vol. 30, no. 7, pp. 1095-1107, 2012.

[588]    D. Pitic, M. Drǎgan, D. Brǎtean, and Ş. L. Pitic, "Identifying the differences between bachelor and master students' perception regarding the educational service quality at the German study line," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 233-236, 2012.

[589]    L. Pitic, S. Brad, and M. Fulea, "Structured approach for evaluating the opportunity, selecting and applying business process innovation," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 399-402, 2012.

[590]    O. Y. Plotinskaya, V. Y. Prokofiev, G. Damian, F. Damian, and B. Lehmann, "The Cisma deposit, Baiut district, Eastern Carpathians, Romania: Sphalerite composition and formation conditions," Carpathian Journal of Earth and Environmental Sciences, vol. 7, no. 2, pp. 265-273, 2012.

[591]    D. Pojar, P. Jeong, and S. Nedevschi, "Robust visual odometry using stereo reconstruction error model C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 149-154, 30 August 2012 through 1 September 2012 2012.

[592]    D. Pojar and S. Nedevschi, "Improving stereo vision odometry for mobile robots in outdoor dynamic environments C3 - ICINCO 2012 - Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics," 9th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2012, vol. 2, pp. 476-480, 28 July 2012 through 31 July 2012 2012.

[593]    V. Polec, V. Maier, S. G. Pavel, and H. G. Beleiu, "Analytical identification of the influence coefficient of the receivers equivalent number and applications C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 207-212, 25 October 2012 through 27 October 2012 2012.

[594]    Z. A. Polgar, M. P. Stef, Z. I. Kiss, A. Hosu, and V. Bota, "Improving link reliability through network coding in cooperative cellular networks," Radioengineering, vol. 21, no. 2, pp. 673-682, 2012.

[595]    O. Ponta, E. Vanea, A. Cheniti, P. Berce, and S. Simon, "Structural and surface characterization of nanostructured spray dried titanosilicate microspheres," Materials Chemistry and Physics, vol. 135, no. 2-3, pp. 863-869, 2012.

[596]    A. A. Pop, F. Gillon, and M. M. Radulescu, "Modeling and permanent-magnet shape optimization of an axial-flux machine C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 357-363, 2 September 2012 through 5 September 2012 2012.

[597]    A. C. Pop, V. Petrus, C. S. Martis, V. Iancu, and J. Gyselinck, "Comparative study of different torque sharing functions for losses minimization in Switched Reluctance Motors used in electric vehicles propulsion C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 356-365, 24 May 2012 through 26 May 2012 2012.

[598]    A. V. Pop, M. Imecs, I. L. Incze, and C. A. Negrea, "Modeling and simulation of current-controlled PWM strategy with regular sampling for constant switching frequency C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 446-450, 25 October 2012 through 27 October 2012 2012.

[599]    A. V. Pop, I. I. Incze, M. Imecs, C. A. Negrea, and C. Szabo, "Current-controlled PWM strategy with carrier wave for constant switching frequency C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 347-351, 24 May 2012 through 27 May 2012 2012.

[600]    A. Pop and M. S. Pop, "Semiprimary n-semigroups," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 127-132, 2012.

[601]    C. B. Pop, I. Anghel, T. Cioara, I. Salomie, and I. Vartic, "A swarm-inspired data center consolidation methodology C3 - ACM International Conference Proceeding Series," 2nd International Conference on Web Intelligence, Mining and Semantics, WIMS 2012, 13 June 2012 through 15 June 2012 2012.

[602]    C. B. Pop et al., "Biologically-inspired clustering of semantic Web services. Birds or ants intelligence?," Concurrency Computation Practice and Experience, vol. 24, no. 6, pp. 619-633, 2012.

[603]    C. B. Pop, V. R. Chifu, I. Salomie, T. Kovacs, A. N. Niculici, and D. S. Suia, "Business process optimization using bio-inspired methods - Ants or bees intelligence? C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 65-71, 30 August 2012 through 1 September 2012 2012.

[604]    C. B. Pop, V. R. Chifu, I. Salomie, A. Negrean, and H. Jeflea, "Hybrid genetic algorithm for selecting the optimal or near-optimal solution in semantic web service composition C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 57-64, 30 August 2012 through 1 September 2012 2012.

[605]    C. I. Pop, C. Festila, E. H. Dulf, and M. Gligan, "Tracking and disturbance rejection in the 13C cryogenic separation column," Control Engineering and Applied Informatics, vol. 14, no. 1, pp. 48-57, 2012.

[606]    C. I. Pop, C. M. Ionescu, and R. De Keyser, "Time delay compensation for the secondary processes in a multivariable carbon isotope separation unit," Chemical Engineering Science, vol. 80, pp. 205-218, 2012.

[607]    C. I. Pop et al., "An alternative EPSAC based control strategy for multivariable time delay processes C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 150-155, 24 May 2012 through 27 May 2012 2012.

[608]    C. I. Pop, C. Ionescu, R. de Keyser, and E. H. Dulf, "Robustness evaluation of fractional order control for varying time delay processes," Signal, Image and Video Processing, vol. 6, no. 3, pp. 453-461, 2012.

[609]    F. C. Pop, M. Cremene, M. F. Vaida, and A. Serbǎnescu, "A SOA approach for medical services optimization using evolutionary Algorithms C3 - Proceedings of the IASTED International Conference on Telehealth, Telehealth 2012," IASTED International Conference on Telehealth, Telehealth 2012, pp. 760-766, 15 February 2012 through 17 February 2012 2012.

[610]    L. Pop, M. Bosca, and E. Culea, "Spectroscopic and magnetic behavior of Gd and Nd ions in lead-germanate glasses," Journal of Alloys and Compounds, vol. 525, pp. 58-62, 2012.

[611]    O. T. Pop, D. Barbosu, and D. Miclaus, "The Voronovskaja type theorem for an extension of Szász-Mirakjan operators," Demonstratio Mathematica, vol. 45, no. 1, pp. 107-115, 2012.

[612]    P. C. Pop, I. Kara, and A. H. Marc, "New mathematical models of the generalized vehicle routing problem and extensions," Applied Mathematical Modelling, vol. 36, no. 1, pp. 97-107, 2012.

[613]    P. C. Pop and O. Matei, "A genetic programming approach for solving the linear ordering problem C3 - Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)," 7th International Conference on Hybrid Artificial Intelligent Systems, HAIS 2012, vol. 7209 LNAI, no. PART 2, pp. 331-338, 28 March 2012 through 30 March 2012 2012.

[614]    P. C. Pop and C. P. Sitar, "New models of the generalized fixed-charge network design problem," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 143-150, 2012.

[615]    S. Pop, V. Bande, D. Pitica, and I. Ciascai, "Dynamic measurement circuit for the resistive transducers C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 259-262, 25 October 2012 through 28 October 2012 2012.

[616]    V. Pop, "Stability of some functional equations defined by quasiarithmetic means," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 151-156, 2012.

[617]    V. Pop, R. Hulea, and M. Pop, "Parametric studies in plates with holes for stress concentration factor C3 - Advances in Civil Engineering and Building Materials - Selected Peer Reviewed Papers from 2012 2nd International Conference on Civil Engineering and Building Materials, CEBM 2012," 2nd International Conference on Civil Engineering and Building Materials, CEBM 2012, pp. 835-839, 17 November 2012 through 18 November 2012 2012.

[618]    D. Popa, "Selections of set-valued maps satisfying functional inclusions on square-symmetric grupoids," Springer Optimization and Its Applications, vol. 52, pp. 261-272, 2012.

[619]    D. C. Popa, V. I. Gliga, L. Szabó, and V. Iancu, "Tubular transverse flux variable reluctance motor in modular construction C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 572-577, 24 May 2012 through 26 May 2012 2012.

[620]    D. Popa and I. Raşa, "Hyers-Ulam stability of the linear differential operator with nonconstant coefficients," Applied Mathematics and Computation, vol. 219, no. 4, pp. 1562-1568, 2012.

[621]    D. Popa and I. Raşa, "The Fréchet functional equation with application to the stability of certain operators," Journal of Approximation Theory, vol. 164, no. 1, pp. 138-144, 2012.

[622]    F. Popa, I. Chicinaś, O. Isnard, and V. Pop, "Heat-treatment influence on Ni-Fe-Cu-Mo nanocrystalline alloy obtained by mechanical alloying," Journal of Thermal Analysis and Calorimetry, vol. 110, no. 1, pp. 295-299, 2012.

[623]    M. Popa, A. Mesaros, R. A. Mereu, I. Perhaita, L. Ciontea, and T. Petrisor, "Thermal decomposition and kinetics of the precursors for obtaining zno and teah modified ZnO nanopowders," Studia Universitatis Babes-Bolyai Chemia, no. 4, pp. 167-173, 2012.

[624]    G. L. Popescu, "The influence of environmental temperature on the exhaust gases opacity from a single cylinder diesel engine powered by fuel obtained from polyethylene," INMATEH - Agricultural Engineering, vol. 37, no. 2, pp. 79-86, 2012.

[625]    S. G. Popescu and A. A. Petruş, "Risk analysis methods in project management. Critical analysis," Quality - Access to Success, vol. 13, no. 127, pp. 73-76, 2012.

[626]    S. Popescu, M. Dragomir, D. Pitic, and E. Brad, "Method for competitive environmental planning," Environmental Engineering and Management Journal, vol. 11, no. 4, pp. 823-828, 2012.

[627]    V. Popescu, M. Bace, and S. Nedevschi, "Probabilistic approach for automated reasoning for lane identification in intelligent vehicles C3 - Proceedings - 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011," 13th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, SYNASC 2011, pp. 255-258, 26 September 2011 through 29 September 2011 2012.

[628]    V. Popescu, R. Danescu, and S. Nedevschi, "On-road position estimation by probabilistic integration of visual cues C3 - IEEE Intelligent Vehicles Symposium, Proceedings," 2012 IEEE Intelligent Vehicles Symposium, IV 2012, pp. 583-589, 3 June 2012 through 7 June 2012 2012.

[629]    V. Popescu and S. Nedevschi, "Cut-in maneuver recognition and behavior generation using Bayesian networks and fuzzy logic C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 123-130, 30 August 2012 through 1 September 2012 2012.

[630]    F. Popişter, D. Popescu, and D. Hurgoiu, "A new method for using reverse engineering in case of ceramic tiles," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 409-412, 2012.

[631]    A. Porfire, L. Rus, A. L. Vonica, and I. Tomuta, "High-throughput NIR-chemometric methods for determination of drug content and pharmaceutical properties of indapamide powder blends for tabletting," Journal of Pharmaceutical and Biomedical Analysis, vol. 70, pp. 301-309, 2012.

[632]    A. Porfire, I. Tomuta, L. Tefas, S. E. Leucuta, and M. Achim, "Simultaneous quantification of l-α-phosphatidylcoline and cholesterol in liposomes using near infrared spectrometry and chemometry," Journal of Pharmaceutical and Biomedical Analysis, vol. 63, pp. 87-94, 2012.

[633]    D. Porojan, I. Bâldea, M. Achim, and R. Cosgarea, "Phenytoin induces in vitro melanocyte proliferation," International Journal of Dermatology, vol. 51, no. 11, pp. 1379-1384, 2012.

[634]    M. Purcar, V. Topa, A. Avram, and R. Chereches, "CAD/CAE integration of the 3D electrode shape change modeling for electrochemical processes," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 519-524, 2012.

[635]    M. Purcar, V. Topa, C. Munteanu, R. Chereches, A. Avram, and L. Grindei, "Optimisation of the layer thickness distribution in electrochemical processes using the level set method," IET Science, Measurement and Technology, vol. 6, no. 5, pp. 376-385, 2012.

[636]    E. Puschita, P. Kántor, G. Manuliac, T. Palade, and J. Bitó, "Enabling frame-based adaptive video transmission in a multilink environment," Advances in Electrical and Computer Engineering, vol. 12, no. 2, pp. 9-14, 2012.

[637]    E. Puschita, A. E. I. Pastrav, A. Moldovan, and T. Palade, "QoS support for resource management in unified network C3 - Mendel," 18th International Conference on Soft Computing, MENDEL 2012, pp. 576-581, 27 June 2012 through 29 June 2012 2012.

[638]    M. Pustan, C. Birleanu, and C. Dudescu, "Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading C3 - DTIP 2012 - Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS," 2012 Symposium on Design, Test, Integration and Packaging of MEMS/MOEMS, DTIP 2012, pp. 87-92, 25 April 2012 through 27 April 2012 2012.

[639]    M. Pustan, C. Birleanu, C. Dudescu, and O. Belcin, "Mechanical and tribological characterizations for reliability design of micromembranes C3 - 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2012," 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2012, 16 April 2012 through 18 April 2012 2012.

[640]    M. Pustan, R. Muller, and J. C. Golinval, "Nanomechanical and nanotribological characterization of microelectromechanical system," Journal of Optoelectronics and Advanced Materials, vol. 14, no. 3-4, pp. 401-412, 2012.

[641]    M. Pustan, V. Rochus, and J. C. Golinval, "Mechanical and tribological characterization of a thermally actuated MEMS cantilever," Microsystem Technologies, vol. 18, no. 3, pp. 247-256, 2012.

[642]    A. N. Racasan, C. Pacurar, C. Munteanu, V. Topa, D. D. Micu, and C. Hebedean, "Modeling and mitigation techniques of the magnetic integrated structures parasitic capacitance C3 - Proceedings of the Universities Power Engineering Conference," 2012 47th International Universities Power Engineering Conference, UPEC 2012, 4 September 2012 through 7 September 2012 2012.

[643]    A. Racasan, C. Munteanu, V. Tapa, C. Pacurar, and C. Hebedean, "Minimization of the equivalent parallel capacitance in planar magnetic EMI filters C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 519-524, 25 October 2012 through 27 October 2012 2012.

[644]    A. Racasan, C. Munteanu, V. Topa, C. Pacurar, and C. Hebedean, "Minimization of the equivalent parallel capacitance in planar magnetic integrated structures C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 219-224, 24 May 2012 through 26 May 2012 2012.

[645]    C. R. Rad, V. Maties, O. Hancu, and C. Lapusan, "Hardware-in-the-Loop (HIL) simulation used for testing actuation system of a 2-DOF parallel robot C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 334-343, 6 June 2012 through 8 June 2012 2012.

[646]    M. Rada, E. Culea, S. Rada, A. Bot, N. Aldea, and V. Rednic, "Anomalies of some physical properties and electrochemical performance of lithium-lead-germanate glasses," Journal of Non-Crystalline Solids, vol. 358, no. 23, pp. 3129-3136, 2012.

[647]    S. Rada, P. Pascuta, L. Rus, M. Rada, and E. Culea, "Spectroscopic properties and ab initio calculations on the structure of erbium-zinc-borate glasses and glass ceramics," Journal of Non-Crystalline Solids, vol. 358, no. 1, pp. 30-35, 2012.

[648]    D. Radu, C. Avram, A. Aştilean, B. Parrein, and J. Yi, "Acoustic noise pollution monitoring in an urban environment using a VANET network C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 244-248, 24 May 2012 through 27 May 2012 2012.

[649]    D. Radu, D. Petru, T. Mirela, and S. Ioan-Valentin, "Experimental tuning of DC motors," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 353-356, 2012.

[650]    P. Radu and L. Gheorghe, "Implementation of an automatic control system of technological process for disinfection of drinking water from treatment plants C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 144-149, 24 May 2012 through 27 May 2012 2012.

[651]    S. A. Radu and D. F. Frǎţilǎ, "Simulation and experimental research on the vacuum casting of non-metallic complex parts using flexible molds," Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science, vol. 13, no. 4, pp. 343-350, 2012.

[652]    M. M. Radulescu, "Foreword," Power Systems, vol. 57, pp. v-vi, 2012.

[653]    J. Rajmond and P. Dan, "Investigating capacitor lifetimes under thermal stress C3 - 2012 4th Electronic System-Integration Technology Conference, ESTC 2012," 2012 4th Electronic System-Integration Technology Conference, ESTC 2012, 17 September 2012 through 20 September 2012 2012.

[654]    J. Rajmond and P. Dan, "Thermal modeling of through hole capacitors C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 227-232, 25 October 2012 through 28 October 2012 2012.

[655]    D. Raluca and B. Monica, "TLS protocol: Improvement using proxies C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 151-154, 15 November 2012 through 16 November 2012 2012.

[656]    B. Ranjbar-Sahraei, F. Shabaninia, A. Nemati, and S. D. Stan, "A novel robust decentralized adaptive fuzzy control for swarm formation of multiagent systems," IEEE Transactions on Industrial Electronics, vol. 59, no. 8, pp. 3124-3134, 2012.

[657]    A. Rarau and K. Pusztai, "An experience with using Z for mobile computing C3 - Proceedings of the 6th IASTED International Conference on Software Engineering and Applications, SEA 2002," 6th IASTED International Conference on Software Engineering and Applications, SEA 2002, pp. 423-427, 4 November 2002 through 6 November 2002 2012.

[658]    I. Rasa, "Estimates for the semigroup associated with Bernstein-Schnabl operators," Carpathian Journal of Mathematics, vol. 28, no. 1, pp. 157-162, 2012.

[659]    I. Raşa, "Power Series of Bernstein Operators and Approximation of Resolvents," Mediterranean Journal of Mathematics, vol. 9, no. 4, pp. 635-644, 2012.

[660]    C. Razvan and L. Iulian, "A car component subjected to multiple sources of random vibrations," Romanian Journal of Acoustics and Vibration, vol. 9, no. 2, pp. 117-122, 2012.

[661]    T. Ristoiu et al., "Electrical properties of ceria/carbonate nanocomposites," Journal of Alloys and Compounds, vol. 532, pp. 109-113, 2012.

[662]    D. Rodila, V. Bacu, and D. Gorgan, "Comparative parallel execution of SWAT hydrological model on multicore and grid architectures," International Journal of Web and Grid Services, vol. 8, no. 3, pp. 304-320, 2012.

[663]    D. Rodila and D. Gorgan, "Geospatial and grid interoperability through OGC services gridification," IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 5, no. 6, pp. 1650-1658, 2012.

[664]    D. Roşca, "Generalized orthonormal piecewise constant wavelet bases with 1-4 splitting," International Journal of Wavelets, Multiresolution and Information Processing, vol. 10, no. 1, 2012.

[665]    D. Roşca and G. Plonka, "An Area Preserving Projection from the Regular Octahedron to the Sphere," Results in Mathematics, vol. 62, no. 3-4, pp. 429-444, 2012.

[666]    C. Rosioru, S. Talu, M. Talu, S. Giovanzana, and C. Craciun, "Morphometric assessments for the healthy rat hepatocytes," Annals of the Romanian Society for Cell Biology, vol. 17, no. 1, pp. 74-79, 2012.

[667]    H. Rotaru et al., "Cranioplasty with custom-made implants: Analyzing the cases of 10 patients," Journal of Oral and Maxillofacial Surgery, vol. 70, no. 2, pp. e169-e176, 2012.

[668]    M. Ruba and D. Fodorean, "Analysis of fault-tolerant multiphase power converter for a nine-phase permanent magnet synchronous machine," IEEE Transactions on Industry Applications, vol. 48, no. 6, pp. 2092-2101, 2012.

[669]    M. Ruba, L. Szabo, and D. Fodorean, "Design and analysis of low voltage high current SRM for small automotive applications C3 - SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion," 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion, SPEEDAM 2012, pp. 341-346, 20 June 2012 through 22 June 2012 2012.

[670]    A. M. Rus and L. Morar, "Software - an opportunity for the travel industry companies," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 413-416, 2012.

[671]    A. M. Rus, L. Morar, and D. Curtean, "The strategic management and the travel companies," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 259-262, 2012.

[672]    D. C. Rus, N. S. Preda, R. Teodorescu, and M. Imecs, "Compensation methods applied in current control schemes for large AC drive systems C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 350-355, 24 May 2012 through 26 May 2012 2012.

[673]    L. M. Rus et al., "Solid form of indapamide recrystallized from acetonitrile/diethyl ether solvent mixture C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 39-42, 29 September 2011 through 1 October 2011 2012.

[674]    L. M. Rus et al., "Compatibility studies of indapamide/pharmaceutical excipients used in tablet preformulation," Farmacia, vol. 60, no. 1, pp. 92-101, 2012.

[675]    C. Rusu and J. Astola, "About positive trigonometric polynomials and 1-D discrete phase retrieval problem C3 - European Signal Processing Conference," 20th European Signal Processing Conference, EUSIPCO 2012, pp. 1169-1173, 27 August 2012 through 31 August 2012 2012.

[676]    C. Rusu, A. R. Figueiras-Vidal, and C. F. N. Cowan, "Cost function adaptation revisited C3 - International Conference on Signal Processing Proceedings, ICSP," 2012 11th International Conference on Signal Processing, ICSP 2012, vol. 1, pp. 123-126, 21 October 2012 through 25 October 2012 2012.

[677]    C. Rusu, S. Roncagliolo, A. Figueroa, V. Rusu, and D. Gorgan, "Evaluating the usability and the communicability of grid computing applications C3 - ACHI 2012 - 5th International Conference on Advances in Computer-Human Interactions," 5th International Conference on Advances in Computer-Human Interactions, ACHI 2012, pp. 204-207, 30 January 2012 through 4 February 2012 2012.

[678]    E. Sabǎu, N. Bâlc, P. Bere, and O. Nemeş, "New materials from waste glass fibre," Studia Universitatis Babes-Bolyai Chemia, no. 4, pp. 201-208, 2012.

[679]    A. Sabou, C. M. Mocan, and D. Gorgan, "Particle based modelling and processing of high resolution and large textile surfaces C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 355-360, 30 August 2012 through 1 September 2012 2012.

[680]    M. Safriuc and C. Ciupan, "Traffic warning system using visible light communication," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 417-420, 2012.

[681]    I. Salomie, V. R. Chifu, C. B. Pop, and R. Suciu, "Firefly-based business process optimization C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 49-56, 30 August 2012 through 1 September 2012 2012.

[682]    P. Salvatore, C. Massari, V. Marino, M. Fulea, and S. Brad, "Supporting technology innovation processes in manufacturing small and medium enterprises," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 421-426, 2012.

[683]    T. Sanislav and L. Miclea, "An agent-oriented approach for cyber-physical system with dependability features C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 356-361, 24 May 2012 through 27 May 2012 2012.

[684]    T. Sanislav and L. Miclea, "Cyber-physical systems - Concept, challenges and research areas," Control Engineering and Applied Informatics, vol. 14, no. 2, pp. 28-33, 2012.

[685]    M. Saplontai, N. Balc, V. Saplontai, I. Cojocaru, R. Toth, and M. Moldovan, "Synthesis and characterization of nano hydroxyapatite used for immobilizing heavy metals," Revista de Chimie, vol. 63, no. 12, pp. 1228-1230, 2012.

[686]    I. L. Scurtu, N. Plitea, N. Crisan, and D. Pisla, "Kinematics and workspace of a new surgical robot with five degrees of freedom C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 406-411, 24 May 2012 through 27 May 2012 2012.

[687]    G. Sebestyen, M. Bulgaru, and L. Grindei, "Pro-inova: Virtual platform for innovation management in doctoral schools C3 - CSEDU 2012 - Proceedings of the 4th International Conference on Computer Supported Education," 4th International Conference on Computer Supported Education, CSEDU 2012, vol. 1, pp. 112-117, 16 April 2012 through 18 April 2012 2012.

[688]    G. Sebestyen and A. Hangan, "Genetic approach for real-time scheduling on multiprocessor systems C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 267-272, 30 August 2012 through 1 September 2012 2012.

[689]    G. Sebestyen, A. Hangan, and A. Suciu, "Simulation-based schedulability tests for multiprocessor real-time systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 216-221, 24 May 2012 through 27 May 2012 2012.

[690]    G. Sebestyen-Pal and G. D. Rus, "Simulation-based evaluation of robot and wireless sensor network interaction C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 210-215, 24 May 2012 through 27 May 2012 2012.

[691]    M. Şenilǎ, E. A. Levei, L. R. Şenilǎ, G. M. Oprea, and C. M. Roman, "Mercury in soil and perennial plants in a mining-affected urban area from Northwestern Romania," Journal of Environmental Science and Health - Part A Toxic/Hazardous Substances and Environmental Engineering, vol. 47, no. 4, pp. 614-621, 2012.

[692]    P. O. P. Septimiu, P. Dan, and C. Ioan, "Identifying and removing systematic error due to resistance tolerance from measurement system of inclinometer," Journal of Electrical and Electronics Engineering, vol. 5, no. 1, pp. 199-202, 2012.

[693]    R. E. Sestraş, L. Jäntschi, and S. D. Bolboacǎ, "Poisson parameters of antimicrobial activity: A quantitative structure-activity approach," International Journal of Molecular Sciences, vol. 13, no. 4, pp. 5207-5229, 2012.

[694]    R. Sestraş, L. Jäntschi, and S. Bolboacǎ, "Quantum mechanics study on a series of steroids relating separation with structure," Journal of Planar Chromatography - Modern TLC, vol. 25, no. 6, pp. 528-533, 2012.

[695]    M. Simina, L. Molnar, D. Manea, and I. Ardelean, "Monitoring the Air Influence on Cement-Lime Mortar Hydration Using Low-Field Nuclear Magnetic Resonance Relaxometry," Applied Magnetic Resonance, vol. 43, no. 3, pp. 443-450, 2012.

[696]    A. Sîntǎmǎrian, "Some new sequences that converge to a generalized Euler constant," Applied Mathematics Letters, vol. 25, no. 6, pp. 941-945, 2012.

[697]    E. Sipos, L. Cica, and C. Miron, "Software minimization of ternary functions using Matlab C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 284-289, 24 May 2012 through 27 May 2012 2012.

[698]    M. Sirbu and L. Grama, "Location of WLAN devices based on OFDM signals time synchronization C3 - 2012 9th International Conference on Communications, COMM 2012 - Conference Proceedings," 2012 9th International Conference on Communications, COMM 2012, pp. 251-254, 21 June 2012 through 23 June 2012 2012.

[699]    I. V. Sita, "Building control, monitoring, safety and security using collaborative systems C3 - Proceedings of the 2012 4th International Conference on Intelligent Networking and Collaborative Systems, INCoS 2012," 2012 4th International Conference on Intelligent Networking and Collaborative Systems, INCoS 2012, pp. 662-667, 19 September 2012 through 21 September 2012 2012.

[700]    I. V. Sita, "Collaborative systems for building automation C3 - Proceedings of the 2012 4th International Conference on Intelligent Networking and Collaborative Systems, INCoS 2012," 2012 4th International Conference on Intelligent Networking and Collaborative Systems, INCoS 2012, pp. 485-486, 19 September 2012 through 21 September 2012 2012.

[701]    I. V. Sita, "Design and development of building management systems using KNX devices," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 525-528, 2012.

[702]    I. V. Sita, "Train comfort, access and security using KNX and LOGO! controllers C3 - Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS," 2012 Electrical Systems for Aircraft, Railway and Ship Propulsion, ESARS 2012, 16 October 2012 through 18 October 2012 2012.

[703]    L. G. Socaciu, "Thermal energy storage with phase change material," Leonardo Electronic Journal of Practices and Technologies, vol. 11, no. 20, pp. 75-98, 2012.

[704]    L. E. Somesan, K. Hameyer, E. Pǎdurariu, I. A. Viorel, and C. Marţiş, "Sizing-designing procedure of the permanent magnet flux-switching machine based on a simplified analytical model C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 653-658, 24 May 2012 through 26 May 2012 2012.

[705]    L. Somesan, E. Padurariu, I. A. Viorel, and L. Szabo, "Design of a permanent magnet flux-switching machine C3 - Proceedings of 9th International Conference, ELEKTRO 2012," 9th International Conference on ELEKTRO 2012, pp. 256-259, 21 May 2012 through 22 May 2012 2012.

[706]    E. S. P. Souca and C. Ciupan, "Considerations regarding the essential components used in the construction of small wind turbines," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 403-408, 2012.

[707]    A. Stan, P. Bell, and S. King, "A grapheme-based method for automatic alignment of speech and text data C3 - 2012 IEEE Workshop on Spoken Language Technology, SLT 2012 - Proceedings," 2012 IEEE Workshop on Spoken Language Technology, SLT 2012, pp. 286-290, 2 December 2012 through 5 December 2012 2012.

[708]    C. Stan, T. Minea, T. M. Cristescu, L. Buimaga-Iarinca, and C. P. Cristescu, "Structure functions and multifractal detrended fluctuation analysis applied to the coding sequences: Case study - Escherichia Coli," UPB Scientific Bulletin, Series A: Applied Mathematics and Physics, vol. 74, no. 1, pp. 109-114, 2012.

[709]    O. Stan, D. Sauciuc, and L. Miclea, "Electronic healthcare record according to general clinical observation file C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 503-507, 24 May 2012 through 27 May 2012 2012.

[710]    I. Stefan and L. Miclea, "The usage of contextual information to develop data test vectors C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 302-306, 24 May 2012 through 27 May 2012 2012.

[711]    I. Ştefan, G. Moiş, S. Enyedi, and L. Miclea, "A load balancing algorithm for multi-agent systems," Studies in Computational Intelligence, vol. 402, pp. 103-114, 2012.

[712]    R. Stefan, E. Culea, and P. Pascuta, "The effect of copper ions addition on structural and optical properties of zinc borate glasses," Journal of Non-Crystalline Solids, vol. 358, no. 4, pp. 839-846, 2012.

[713]    R. Stefan, P. Pascuta, A. Popa, O. Raita, E. Indrea, and E. Culea, "XRD and EPR structural investigation of some zinc borate glasses doped with iron ions," Journal of Physics and Chemistry of Solids, vol. 73, no. 2, pp. 221-226, 2012.

[714]    A. Şteopan, M. Steopan, and A. Nicu, "Competitive design and mockup of a modular pipe cleaning mobile equipment C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 396-399, 24 May 2012 through 27 May 2012 2012.

[715]    M. Steopan, R. Curta, and G. Muresan, "Using CAM software to improve factory floor productivity C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 372-375, 24 May 2012 through 27 May 2012 2012.

[716]    M. Steopan, T. Györke, F. Popister, and S. Gal, "Competitive design of an anthropomorphic gripper C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 455-460, 24 May 2012 through 27 May 2012 2012.

[717]    D. Stet, L. Czumbil, D. D. Micu, and O. Miron, "Corossion evaluation and mitigation on metallic pipelines C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 554-559, 25 October 2012 through 27 October 2012 2012.

[718]    D. Ştȩt, L. Czumbil, D. D. Micu, V. Ţopa, and L. Ancas, "Stream gas pipeline in proximity of high voltage power lines. Part i - Soil resistivity evaluation C3 - Proceedings of the Universities Power Engineering Conference," 2012 47th International Universities Power Engineering Conference, UPEC 2012, 4 September 2012 through 7 September 2012 2012.

[719]    D. Stet, D. Doru Micu, L. Czumbil, L. Darabant, and A. Ceclan, "Simulation of interferences between power lines and gas pipelines in unbalanced phase currents state," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 4, pp. 1178-1189, 2012.

[720]    F. Stoicuta, I. Ivanciu, E. Minzat, A. B. Rus, and V. Dobrota, "An OpenNetInf-based cloud computing solution for cross-layer QoS: Monitoring part using iOS terminals C3 - 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012 - Conference Proceedings," 2012 10th International Symposium on Electronics and Telecommunications, ISETC 2012, pp. 167-170, 15 November 2012 through 16 November 2012 2012.

[721]    O. Stoicuta and T. Pana, "Speed and rotor flux observer for sensorless induction motor drives C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 68-73, 24 May 2012 through 27 May 2012 2012.

[722]    F. A. Stremţan and I. Lupea, "Assessing the sound absorption of micro-perforated panels by using the transfer function and the impedance tube," Romanian Journal of Acoustics and Vibration, vol. 9, no. 2, pp. 95-100, 2012.

[723]    A. Suciu, R. A. Toma, and K. Marton, "Parallel implementation of the TestU01 statistical test suite C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 317-322, 30 August 2012 through 1 September 2012 2012.

[724]    C. Suciu, G. Arghir, and P. Bere, "Hard chemical constituent evidence in ferromanganese alloyed powder FeMn80C20," Studia Universitatis Babes-Bolyai Chemia, no. 3, pp. 259-266, 2012.

[725]    M. Suciu, "About the study of bending beam on elastic environment by transfer-matrix method C3 - Applied Mechanics and Materials," 7th International Conference on Optimization of the Mechanical Engineering, Manufacturing Systems, Robotics and Aerospace, OPTIROB 2012, vol. 186, pp. 149-155, 21 June 2012 through 23 June 2012 2012.

[726]    M. Suciu, "About the study of the springs loaded with uniform radial charge density by Transfer-Matrix Method C3 - Advanced Materials Research," 2012 2nd International Conference on Advanced Material Research, ICAMR 2012, vol. 463-464, pp. 3-6, 7 January 2012 through 8 January 2012 2012.

[727]    M. Suciu, "Bending study for axially symmetric tapping plates with uniform load at all crown by Transfer-Matrix Method C3 - Advanced Materials Research," 2012 2nd International Conference on Advanced Material Research, ICAMR 2012, vol. 463-464, pp. 16-19, 7 January 2012 through 8 January 2012 2012.

[728]    M. Suciu, "Study of circular tapping plates, with a circumferential vertical load at the interior boundary by Transfer-Matrix Method C3 - Advanced Materials Research," 2012 2nd International Conference on Advanced Material Research, ICAMR 2012, vol. 463-464, pp. 155-159, 7 January 2012 through 8 January 2012 2012.

[729]    M. Suciu, M. Cremene, F. C. Pop, and D. Dumitrescu, "Equitable solutions in QoS-aware service optimization C3 - GECCO'12 - Proceedings of the 14th International Conference on Genetic and Evolutionary Computation Companion," 14th International Conference on Genetic and Evolutionary Computation, GECCO'12, pp. 1537-1538, 7 July 2012 through 11 July 2012 2012.

[730]    M. Suciu, B. Gherman, C. Vaida, N. Plitea, A. Stoica, and D. Pisla, "On the kinematics of a hybrid parallel robot used in minimally invasive surgery C3 - Mechanisms and Machine Science," 1st Workshop on Mechanisms, Transmissions and Applications, MeTrApp 2011, vol. 3, pp. 255-262, 6 October 2011 through 8 October 2011 2012.

[731]    R. C. Suciu et al., "TiO 2 thin film deposition by chemical methods C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 159-162, 29 September 2011 through 1 October 2011 2012.

[732]    F. Surdu, B. K. Ágoston, and C. S. Marţiş, "Study on the behavior of a vehicle charging system with Reverse claw-pole generator C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 557-564, 24 May 2012 through 26 May 2012 2012.

[733]    F. Surdu, B. K. Ágoston, C. S. Marţiş, and R. Trifa, "Theoretical analysis of the reversed claw poles alternator performances C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 1475-1481, 2 September 2012 through 5 September 2012 2012.

[734]    F. Surdu, K. A. Biro, and C. S. Marţi̧s, "Magneto-Thermal analysis of reversed claw-poles machine," Journal of Electrical and Electronics Engineering, vol. 5, no. 1, pp. 241-246, 2012.

[735]    V. Surducan, E. Surducan, R. Ciupa, and C. Neamtu, "Microwave generator for scientific and medical applications C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 89-92, 29 September 2011 through 1 October 2011 2012.

[736]    L. A. Suta, M. Scuturici, S. Miguet, L. Tougne, and M. F. Vaida, "Local blur assessment in natural images C3 - VISAPP 2012 - Proceedings of the International Conference on Computer Vision Theory and Applications," International Conference on Computer Vision Theory and Applications, VISAPP 2012, vol. 1, pp. 123-128, 24 February 2012 through 26 February 2012 2012.

[737]    L. Şuta, F. Bessy, C. Veja, and M. F. Vaida, "Active contours: Application to plant recognition C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 181-187, 30 August 2012 through 1 September 2012 2012.

[738]    L. Szabó, I. Benţia, D. C. Popa, and M. Ruba, "Contributions to the two degrees of freedom modular variable reluctance motors used in advanced manufacturing systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 514-518, 24 May 2012 through 27 May 2012 2012.

[739]    L. Szabo, I. Bentia, and M. Ruba, "A rotary-linear switched reluctance motor for automotive applications C3 - Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012," 2012 20th International Conference on Electrical Machines, ICEM 2012, pp. 2615-2621, 2 September 2012 through 5 September 2012 2012.

[740]    L. Szabó, I. Benţia, and M. Ruba, "Dual motion switched reluctance motor for advanced industrial applications C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 544-549, 24 May 2012 through 26 May 2012 2012.

[741]    L. Szabo and M. Ruba, "Segmental stator switched reluctance machine for safety-critical applications," IEEE Transactions on Industry Applications, vol. 48, no. 6, pp. 2223-2229, 2012.

[742]    A. Szakács, Z. Pécskay, L. Silye, K. Balogh, D. Vlad, and A. Fülöp, "On the age of the Dej Tuff, Transylvanian Basin (Romania)," Geologica Carpathica, vol. 63, no. 2, pp. 139-148, 2012.

[743]    Z. Szakács, "Energy band structures for electrons on the triangular lattice with uniform magnetic field C3 - AIP Conference Proceedings," Physics Conference TIM 2011, vol. 1472, pp. 89-94, 24 November 2011 through 27 November 2011 2012.

[744]    A. Szilaghyi, A. Stoica, D. Pisla, C. Vaida, and N. Plitea, "Kinematics analysis of a parallel surgical robot," Latest Advances in Robot Kinematics, pp. 333-340, 2012.

[745]    R. Sznajder, M. S. Gowda, and M. M. Moldovan, "More results on Schur complements in Euclidean Jordan algebras," Journal of Global Optimization, vol. 53, no. 1, pp. 121-134, 2012.

[746]    D. Szocs, T. Pan, A. Fenean, and I. Vese, "Inertial acceleration application for wheel slip measurement of mobile robots C3 - 11th International Conference on Modeling and Applied Simulation, MAS 2012, Held at the International Multidisciplinary Modeling and Simulation Multiconference, I3M 2012," 11th International Conference on Modeling and Applied Simulation, MAS 2012, Held at the International Multidisciplinary Modeling and Simulation Multiconference, I3M 2012, pp. 161-168, 19 September 2012 through 21 September 2012 2012.

[747]    D. Szocs, T. Pana, A. Fenesan, and I. Vese, "Error and drift attenuation for wheel slip measurement of a prototype electric vehicle C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 64-69, 25 October 2012 through 27 October 2012 2012.

[748]    E. Szopos, M. Neag, I. Sǎrǎcuţ, H. Hedeşiu, and L. Feştilǎ, "A method for designing FIR filters with arbitrary magnitude characteristic used for modeling human audiogram," Advances in Electrical and Computer Engineering, vol. 12, no. 2, pp. 51-56, 2012.

[749]    Ş. Ţǎlu and S. Giovanzana, "Image analysis of the normal human retinal vasculature using fractal geometry," Human and Veterinary Medicine, vol. 4, no. 1, pp. 14-18, 2012.

[750]    L. Tamas and L. C. Goron, "3D map building with mobile robots C3 - 2012 20th Mediterranean Conference on Control and Automation, MED 2012 - Conference Proceedings," 2012 20th Mediterranean Conference on Control and Automation, MED 2012, pp. 134-139, 3 July 2012 through 6 July 2012 2012.

[751]    L. Tamas and A. Majdik, "Heterogeneous feature based correspondence estimation C3 - IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems," 2012 IEEE International Conference on Multisensor Fusion and Integration for Intelligent Systems, MFI 2012, pp. 89-94, 13 September 2012 through 15 September 2012 2012.

[752]    G. Tarţa and A. Pintea, "Seismic evaluation of multi-storey moment-resisting steel frames with stiffness irregularities using standard and advanced pushover methods C3 - Procedia Engineering," 23rd Czech and Slovak International Conference on Steel Structures and Bridges 2012, vol. 40, pp. 445-450, 26 September 2012 through 28 September 2012 2012.

[753]    V. F. Tarţa, I. Chicinaş, T. F. Marinca, B. V. Neamţu, and F. Popa, "Effect of sintering parameters on the stability of phases of the ZnFe 2O4/α-Fe nanocomposite C3 - Solid State Phenomena," 4th International Conference on Advanced Materials and Structures, AMS 2011, vol. 188, pp. 31-36, 27 October 2011 through 28 October 2011 2012.

[754]    V. F. Tarţa, I. Chicinaş, T. F. Marinca, B. V. Neamţu, F. Popa, and C. V. Pricǎ, "Synthesis of the nanocrystalline/nanosized NiFe2O4 powder by ceramic method and mechanical milling C3 - Solid State Phenomena," 4th International Conference on Advanced Materials and Structures, AMS 2011, vol. 188, pp. 27-30, 27 October 2011 through 28 October 2011 2012.

[755]    M. O. Tǎtar, C. Cirebea, and D. Mândru, "The development of an in-pipe minirobot for various pipe sizes C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 443-448, 24 May 2012 through 27 May 2012 2012.

[756]    A. Taut and O. Pop, "A Matlab tool for simulations of power resonant converters C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 295-298, 25 October 2012 through 28 October 2012 2012.

[757]    P. D. Teodosescu, M. Bojan, D. Fodor, and R. Marschalko, "Research concerning appropriate PFC methods for classic CFL lighting devices C3 - 15th International Power Electronics and Motion Control Conference and Exposition, EPE-PEMC 2012 ECCE Europe," 15th International Power Electronics and Motion Control Conference and Exposition, EPE-PEMC 2012 ECCE Europe, pp. DS3c.111-DS3c.117, 4 September 2012 through 6 September 2012 2012.

[758]    P. D. Teodosescu, M. Bojan, A. A. Pop, and R. Marschalko, "Buck-boost corrector implementing for compact fluorescent lamp applications C3 - Proceedings of the International Conference on Optimisation of Electrical and Electronic Equipment, OPTIM," 2012 13th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM 2012, pp. 833-838, 24 May 2012 through 26 May 2012 2012.

[759]    R. Terebes, M. Borda, C. Germain, and O. Lavialle, "A novel shock filter for image restoration and enhancement C3 - European Signal Processing Conference," 20th European Signal Processing Conference, EUSIPCO 2012, pp. 255-259, 27 August 2012 through 31 August 2012 2012.

[760]    R. Terec, V. Chindriş, L. Szabó, and P. Rafajdus, "Position sensing system for switched reluctance motor control C3 - Proceedings of 9th International Conference, ELEKTRO 2012," 9th International Conference on ELEKTRO 2012, pp. 266-269, 21 May 2012 through 22 May 2012 2012.

[761]    E. Teutan, M. Bara, and I. Ardelean, "Generating of digitised with the aid of Tetrobot module," Mechanika, vol. 18, no. 6, pp. 666-670, 2012.

[762]    G. Thalmaier et al., "Thermal stability of Ni40Ti40Nb20 and Ni32Ti48Nb20 tapes obtained by rapid solidification technique C3 - Solid State Phenomena," 4th International Conference on Advanced Materials and Structures, AMS 2011, vol. 188, pp. 41-45, 27 October 2011 through 28 October 2011 2012.

[763]    A. Ţigǎnaş, "Fostering public attendance within territorial marketing field - A local diagnosis aimed at providing image strategy improvements to the romanian city of Cluj-Napoca," Public Policy and Administration, vol. 11, no. 4, pp. 619-628, 2012.

[764]    I. Tilea and C. Munteanu, "Overvoltage analysis in inverter driven induction motors C3 - EPE 2012 - Proceedings of the 2012 International Conference and Exposition on Electrical and Power Engineering," 2012 7th International Conference and Exposition on Electrical and Power Engineering, EPE 2012, pp. 509-512, 25 October 2012 through 27 October 2012 2012.

[765]    I. Timiş, "Stability of Jungck-type iterative procedure for some contractive type mappings via implicit relations," Miskolc Mathematical Notes, vol. 13, no. 2, pp. 555-567, 2012.

[766]    I. Timiş, "Stability of the picard iterative procedure for mappings which satisfy implicit relations," Communications on Applied Nonlinear Analysis, vol. 19, no. 4, pp. 37-44, 2012.

[767]    R. Tirnovan and S. Giurgea, "Efficiency improvement of a PEMFC power source by optimization of the air management," International Journal of Hydrogen Energy, vol. 37, no. 9, pp. 7745-7756, 2012.

[768]    V. Tisan, A. Dascalescu, M. Coman, and V. Oros, "Rutem - Regional center for training in environmental protection, management and monitoring," Journal of Environmental Protection and Ecology, vol. 13, no. 2 A, pp. 1082-1085, 2012.

[769]    A. B. Tiuc, T. Rusu, S. Ionescu, and O. Nemeş, "Determination of the sound absorption properties of some new composite materials obtained from wastes," Revista Romana de Materiale/ Romanian Journal of Materials, vol. 42, no. 4, pp. 405-414, 2012.

[770]    G. Toader, I. Costin, and S. Toader, "Invariance in some families of means," Springer Optimization and Its Applications, vol. 52, pp. 709-717, 2012.

[771]    F. Toadere, "Analyzing the functionality of a scanner C3 - Proceedings of SPIE - The International Society for Optical Engineering," 6th International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM-N 2012, vol. 8411, 23 August 2012 through 26 August 2012 2012.

[772]    F. Toadere, "Comparative resolution analysis between the functionality of the human eye and of the achromatic doublet C3 - Proceedings of SPIE - The International Society for Optical Engineering," 6th International Conference on Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies, ATOM-N 2012, vol. 8411, 23 August 2012 through 26 August 2012 2012.

[773]    F. Toadere, "Process simulation in digital camera system C3 - Proceedings of SPIE - The International Society for Optical Engineering," Optics, Photonics, and Digital Technologies for Multimedia Applications II, vol. 8436, 17 April 2012 through 18 April 2012 2012.

[774]    F. Toadere and N. Tosa, "Functioning of the protective UV filters based on gold nanoparticles C3 - AIP Conference Proceedings," Processes in Isotopes and Molecules, PIM 2011, vol. 1425, pp. 93-97, 29 September 2011 through 1 October 2011 2012.

[775]    M. Todea, B. Frentiu, R. F. V. Turcu, P. Berce, and S. Simon, "Surface structure changes on aluminosilicate microspheres at the interface with simulated body fluid," Corrosion Science, vol. 54, no. 1, pp. 299-306, 2012.

[776]    V. Todica, M. F. Vaida, and M. Cremene, "Formal verification in web services composition C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 195-200, 24 May 2012 through 27 May 2012 2012.

[777]    R. Todoran and D. Todoran, "Determination optical functions and energetic properties for chalcopyrite minerals C3 - AIP Conference Proceedings," Physics Conference TIM 2011, vol. 1472, pp. 198-203, 24 November 2011 through 27 November 2011 2012.

[778]    V. Tompa, D. Hurgoiu, C. Neamţu, and D. Popescu, "Remote control and monitoring of an autonomous mobile robot C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 438-442, 24 May 2012 through 27 May 2012 2012.

[779]    I. Tomuta, C. Alecu, D. Dudas, and S. E. Leucuta, "Optimization of metoprolol tartrate modified-release matrix tablet formulation using Eudragit NE as binder for metoprolol fluid bed granulation," Asian Journal of Pharmaceutics, vol. 6, no. 2, pp. 101-106, 2012.

[780]    I. Tomuţǎ and S. E. Leucuţa, "Development and in vitro evaluation of multiparticulate sustained release carbamazepine formulation," Acta Poloniae Pharmaceutica - Drug Research, vol. 69, no. 5, pp. 951-964, 2012.

[781]    M. D. Topa, N. Toma, B. S. Kirei, I. Saracut, and A. Farina, "Experimental acoustic evaluation of an auditorium," Advances in Acoustics and Vibration, 2012.

[782]    V. Topa, A. S. Demeter, L. Hotoiu, D. Deconinck, and J. Deconinck, "A transient multi-ion transport model for galvanized steel corrosion protection," Electrochimica Acta, vol. 77, pp. 339-347, 2012.

[783]    V. Topa, M. Purcar, A. Avram, C. Munteanu, R. Chereches, and L. Grindei, "Simulation of the electrode shape change in electrochemical machining based on the level set method," EPJ Applied Physics, vol. 58, no. 1, 2012.

[784]    V. Topa, M. Purcar, C. Munteanu, L. Grindei, C. Pacurar, and O. Garvasiuc, "Shape optimization approach based on the extended finite element method," COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 31, no. 2, pp. 477-497, 2012.

[785]    R. Trifa, C. Martis, K. Biro, and A. M. Gazdac, "Design and analysis of a permanent magnet synchronous machine for automotive electromechanical braking system," Przeglad Elektrotechniczny, vol. 88, no. 7 B, pp. 141-144, 2012.

[786]    M. R. C. Trusca, S. Albert, F. Farcas, M. L. Soran, and M. Abrudean, "Power consumption monitoring in ITIM Datacenter C3 - Proceedings - 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012," 2012 5th Romania Tier 2 Federation Grid, Cloud and High Performance Computing Science, RQ-LCG 2012, pp. 93-95, 25 October 2012 through 27 October 2012 2012.

[787]    M. R. C. Truşcǎ, Ş. Albert, F. Fǎrcaş, M. L. Soran, and M. Abrudean, "Implementation of an additional monitoring device to prevent failures of the cooling systems C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 319-322, 24 May 2012 through 27 May 2012 2012.

[788]    M. Trusca, D. Petreus, R. A. Munteanu, I. V. Sita, and P. Dobra, "Wireless low cost embedded solution for electrical motors control C3 - EDERC 2012 - Proceedings of the 5th European DSP in Education and Research Conference," 5th European DSP in Education and Research Conference, EDERC 2012, pp. 144-148, 13 September 2012 through 14 September 2013 2012.

[789]    M. Tulbure and R. Both, "Models for the AC locomotives regenerative braking C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 525-530, 24 May 2012 through 27 May 2012 2012.

[790]    M. L. Ungureşan, A. Mǎicǎneanu, F. V. Dulf, E. H. Dulf, and D. M. Gligor, "Application of linear regression analysis for iron and copper removal process using natural zeolites," Journal of Thermal Analysis and Calorimetry, vol. 110, no. 3, pp. 1293-1297, 2012.

[791]    M. C. Ureche, A. Basarab, M. F. Vaida, and D. Kouame, "Evaluation of monogenic phase apport in ultrasound-MRI image registration C3 - Proceedings of the IASTED International Conference on Telehealth, Telehealth 2012," IASTED International Conference on Telehealth, Telehealth 2012, pp. 793-799, 15 February 2012 through 17 February 2012 2012.

[792]    M. Vaandrager, R. Babuška, L. Buşoniu, and G. A. D. Lopes, "Imitation learning with non-parametric regression C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 91-96, 24 May 2012 through 27 May 2012 2012.

[793]    M. B. Vac Soporan, V. F. Soporan, E. A. Cociş, G. Bǎtrînescu, and O. Nemeş, "Gas analysis of municipal landfill emissions," Studia Universitatis Babes-Bolyai Chemia, no. 3, pp. 23-30, 2012.

[794]    I. Vagelas, N. Gougoulias, L. Giurgulescu, and I. Papageorgiou, "Potential antifungal activity of olive mill wastewater against postharvest diseases of pears," Carpathian Journal of Food Science and Technology, vol. 4, no. 1, pp. 31-36, 2012.

[795]    I. Vagelas, N. Gougoulias, L. Giurgulescu, and A. Raluca, "Study on red wines contamination with different types of moulds," Carpathian Journal of Food Science and Technology, vol. 4, no. 1, pp. 17-21, 2012.

[796]    C. Vaida, N. Plitea, D. Lese, and D. Pisla, "A parallel reconfigurable robot with six degrees of freedom C3 - Applied Mechanics and Materials," Joint International Conference of the XI International Conference on Mechanisms and Mechanical Transmissions, MTM and the International Conference on Robotics, Robotics'12, vol. 162, pp. 204-213, 6 June 2012 through 8 June 2012 2012.

[797]    D. Vais, "Exporting hard modernity: Construction projects from Ceauescu's Romania in the Third World," Journal of Architecture, vol. 17, no. 3, pp. 433-451, 2012.

[798]    G. Vais, "The house of books - The metamorphosis of the library space (middle ages)," Philobiblon, vol. 17, no. 1, pp. 50-63, 2012.

[799]    D. Vana and T. Niciporuc, "Quality driven best practices in online content management systems," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 287-290, 2012.

[800]    B. O. Varga, "Energy management of electric and hybrid vehicles dependent on powertrain configuration," Central European Journal of Engineering, vol. 2, no. 2, pp. 253-263, 2012.

[801]    M. Varga, M. A. Badiu, and V. Bota, "Link adaptation algorithm for distributed coded transmissions in relay-aided OFDMA systems C3 - 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012 - Proceedings," 2012 35th International Conference on Telecommunications and Signal Processing, TSP 2012, pp. 201-206, 3 July 2012 through 4 July 2012 2012.

[802]    R. Varga, A. Costea, I. Szakats, and S. Nedevschi, "Efficient real-time contour matching C3 - Proceedings - 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012," 2012 IEEE 8th International Conference on Intelligent Computer Communication and Processing, ICCP 2012, pp. 193-199, 30 August 2012 through 1 September 2012 2012.

[803]    A. Vatavu, R. Danescu, and S. Nedevschi, "Real-time dynamic environment perception in driving scenarios using difference fronts C3 - IEEE Intelligent Vehicles Symposium, Proceedings," 2012 IEEE Intelligent Vehicles Symposium, IV 2012, pp. 717-722, 3 June 2012 through 7 June 2012 2012.

[804]    A. Vatavu and S. Nedevschi, "Real-time modeling of dynamic environments in traffic scenarios using a stereo-vision system C3 - IEEE Conference on Intelligent Transportation Systems, Proceedings, ITSC," 2012 15th International IEEE Conference on Intelligent Transportation Systems, ITSC 2012, pp. 722-727, 16 September 2012 through 19 September 2012 2012.

[805]    A. Vatavu and S. Nedevschi, "Vision based real-time modeling of dynamic unstructured environments in driving scenarios C3 - ICINCO 2012 - Proceedings of the 9th International Conference on Informatics in Control, Automation and Robotics," 9th International Conference on Informatics in Control, Automation and Robotics, ICINCO 2012, vol. 2, pp. 141-149, 28 July 2012 through 31 July 2012 2012.

[806]    I. C. Vese, F. Marignetti, and M. M. Radulescu, "State of the art of control techniques for direct-drive linear motion systems with tubular linear permanent-magnet motors," International Review of Electrical Engineering, vol. 7, no. 6, pp. 6020-6025, 2012.

[807]    I. C. Vese, M. M. Radulescu, I. C. Marginean, and D. P. Teodosescu, "Hardware-in-the-loop simulation and implementation of direct thrust-force control of two phase tubular permanent-magnet actuator C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 156-160, 24 May 2012 through 27 May 2012 2012.

[808]    C. Vicas, M. Lupsor, M. Socaciu, S. Nedevschi, and R. Badea, "Influence of expert-dependent variability over the performance of noninvasive fibrosis assessment in patients with chronic hepatitis C by means of texture analysis," Computational and Mathematical Methods in Medicine, vol. 2012, 2012.

[809]    I. Vida-Simiti, N. Jumate, V. Moldovan, G. Thalmaier, and N. Sechel, "Characterization of Gradual Porous Ceramic Structures Obtained by Powder Sedimentation," Journal of Materials Science and Technology, vol. 28, no. 4, pp. 362-366, 2012.

[810]    I. Vida-Simiti, N. Jumate, G. Thalmaier, N. Sechel, and V. Moldovan, "Study of gradual porous metallic membranes obtained by powder sedimentation," Journal of Porous Materials, vol. 19, no. 1, pp. 21-27, 2012.

[811]    I. Vida-Simiti, N. Jumate, G. Thalmaier, and V. Moldovan, "Sintering of sedimented nickel powder gradual porous structures," Powder Metallurgy, vol. 55, no. 2, pp. 154-161, 2012.

[812]    I. Vida-Simiti, D. Nemes, N. Jumate, G. Thalmaier, and N. Sechel, "Self-ordered nanoporous alumina templates formed by anodization of aluminum in oxalic acid," Jom, vol. 64, no. 10, pp. 1143-1147, 2012.

[813]    I. Vidrasan and T. Letia, "Conversion of delay time Petri net models into SCADE projects C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 118-122, 24 May 2012 through 27 May 2012 2012.

[814]    C. Vigu, L. Budai, D. I. Gota, and M. Abrudean, "Hydropower production schedule optimization using genetic algorithms C3 - 2012 IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012 - Proceedings," 2012 18th IEEE International Conference on Automation, Quality and Testing, Robotics, AQTR 2012, pp. 240-243, 24 May 2012 through 27 May 2012 2012.

[815]    T. Vlad, D. Piticǎ, L. Man, and J. Rajmond, "Optimized methods for theoretical and practical training C3 - Proceedings of the International Spring Seminar on Electronics Technology," 35th International Spring Seminar on Electronics Technology: Power Electronics, ISSE 2012, pp. 459-464, 9 May 2012 through 13 May 2012 2012.

[816]    T. Vlad, D. Pitica, and J. Rajmond, "Implementation of interactive communicational elements on e-learning educational platforms C3 - 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012 - Conference Proceedings," 2012 IEEE 18th International Symposium for Design and Technology of Electronics Packages, SIITME 2012, pp. 347-350, 25 October 2012 through 28 October 2012 2012.

[817]    L. Vlǎdǎreanu, A. Curaj, and R. I. Munteanu, "Complex walking robot kinematics analysis and plc multi-tasking control," Revue Roumaine des Sciences Techniques Serie Electrotechnique et Energetique, vol. 57, no. 1, pp. 90-99, 2012.

[818]    L. Vlase, M. Parvu, E. A. Parvu, and A. Toiu, "Phytochemical analysis of Allium fistulosum L. and A. Ursinum L," Digest Journal of Nanomaterials and Biostructures, vol. 8, no. 1, pp. 457-467, 2012.

[819]    L. Vlase, A. Popa, M. Neag, D. Muntean, and S. E. Leucuta, "Pharmacokinetic interaction between ivabradine and phenytoin in healthy subjects," Clinical Drug Investigation, vol. 32, no. 8, pp. 533-538, 2012.

[820]    D. C. Vodnar, "Inhibition of Listeria monocytogenes ATCC 19115 on ham steak by tea bioactive compounds incorporated into chitosan-coated plastic films," Chemistry Central Journal, vol. 6, no. 1, 2012.

[821]    D. C. Vodnar and C. Socaciu, "Green tea increases the survival yield of Bifidobacteria in simulated gastrointestinal environment and during refrigerated conditions," Chemistry Central Journal, vol. 6, no. 1, 2012.

[822]    A. G. Voina, P. G. Pop, and M. F. Vaida, "An evaluation of motif detection tools C3 - Proceedings of the 9th IASTED International Conference on Biomedical Engineering, BioMed 2012," 9th IASTED International Conference on Biomedical Engineering, BioMed 2012, pp. 605-611, 15 February 2012 through 17 February 2012 2012.

[823]    A. G. Voina, P. G. Pop, and M. F. Vaida, "DNA motifs detection algorithms in long sequences C3 - IEEE 12th International Conference on BioInformatics and BioEngineering, BIBE 2012," 12th IEEE International Conference on BioInformatics and BioEngineering, BIBE 2012, pp. 169-174, 11 November 2012 through 13 November 2012 2012.

[824]    F. Xhafa, L. Barolli, D. Rodila, and B. Abdallah, "Welcome message from the ePaMus 2012 workshop organizers C3 - Proceedings - 2012 6th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2012," 2012 6th International Conference on Complex, Intelligent, and Software Intensive Systems, CISIS 2012, 4 July 2012 through 6 July 2012 2012.

[825]    Z. Yang, Q. Wang, M. F. Danca, and J. Zhang, "Complex dynamics of compound bursting with burst episode composed of different bursts," Nonlinear Dynamics, vol. 70, no. 3, pp. 2003-2013, 2012.

[826]    A. Zagos and S. Brad, "Improvements in patent portfolio valuation with bibliometric indicators," Quality - Access to Success, vol. 13, no. SUPPL.5, pp. 451-454, 2012.