ISI Proceedings 2018

[1] C. Achim, R. Rusu-Both, R. I. Chira, and Ieee, "Computerised Application for Lung Cancer Diagnosis Based on Transthoracic Ultrasonography," in 2018 Ieee-Embs Conference on Biomedical Engineering and Sciences, (IEEE EMBS Conference on Biomedical Engineering and Sciences. New York: Ieee, 2018, pp. 211-216.

 

[2] C. Aciu, D. A. Ilutiu-Varvara, D. L. Manea, Y. A. Orban, and F. Babota, "Recycling of plastic waste materials in the composition of ecological mortars," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 274-279.

 

[3] M. Aclan, R. Oezden, and S. Danho, "Investigation of the geometric change of plastic articles made by polyamide," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[4] A. O. Ahgue et al., "A DNA-based chaos algorithm for an efficient image encryption application," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 332-335.

 

[5] K. Al-Akel, C. Veres, V. Gavrilas, and L. O. Marian, "DMAIC IMPORTANCE AND EFFECTIVENESS IN CONTINUOUS IMPROVEMENT MINDSET," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 482-487.

 

[6] D. Al-Janabi and T. S. Letia, "The Development of Complex Data Structures Using Object Enhanced Time Petri Nets," in 2018 22nd International Conference on System Theory, Control and Computing, M. Barbu, R. Solea, and A. Filipescu Eds., (International Conference on System Theory Control and Computing. New York: Ieee, 2018, pp. 709-714.

 

[7] S. Alboaie, D. Cosovan, L. D. Chiorean, and M. F. Vaida, "Lamport n-Time Signature Scheme," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[8] A. Alexan, S. Oniga, and I. A. Pap, "Assisted living personal tracker framework," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[9] C. Alexandra, H. Bogdan, N. Camelia, and K. Zoltan, "Mix design of self-compacting concrete with limestone filler versus fly ash addition," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 301-308.

 

[10] P. Alexandra, T. Bianca, T. Liana-Maria, U. Ioana-Anamaria, R. B. Roxana, and M. Liviu-Cristian, "Intelligent Autonomous Driving," in 2018 22nd International Conference on System Theory, Control and Computing, M. Barbu, R. Solea, and A. Filipescu Eds., (International Conference on System Theory Control and Computing. New York: Ieee, 2018, pp. 53-58.

 

[11] I. M. Alexandru, A. Grama, L. Viman, D. Pitica, and Ieee, "FFT Radix2 Core implemented on FPGA with DSP48 slices," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 109-113.

 

[12] M. Alexandru, D. D. Micu, J. D. Ioan, and R. Andolfato, "Overview on computational methods of Gas Insulated Substation grounding gridanalysis," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 81-86.

 

[13] P. Alexandru, M. Andrei, S. Cristina-Madalina, and O. Stan, "Smart Environmental Monitoring Beacon," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[14] M. Aliz and P. Alexa, Seismic energy dissipation via semi-rigidity (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 319-322.

 

[15] N. Anca-Iulia, C. D. Anca, C. C. Andrei, and Ieee, Propensity of enroling in Electrical and Power Engineering. Case study of Technical University of Cluj-Napoca (2018 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee (in English), 2018.

 

[16] I. Anghel, T. Cioara, D. Moldovan, I. Salomie, and M. M. Tomus, Prediction of Manufacturing Processes Errors: Gradient Boosted Trees Versus Deep Neural Networks (2018 Ieee 16th International Conference on Embedded and Ubiquitous Computing). New York: Ieee (in English), 2018, pp. 29-36.

 

[17] I. Anghel et al., Converting Data Centers in Energy Flexibility Ecosystems (2018 Ieee International Conference on Environment and Electrical Engineering and 2018 Ieee Industrial and Commercial Power Systems Europe). New York: Ieee (in English), 2018.

 

[18] A. Antal, V. Bota, and Ieee, Performance Analysis of a Generic Cooperative HARQ Algorithm over Rayleigh Faded Channels (2018 41st International Conference on Telecommunications and Signal Processing). New York: Ieee (in English), 2018, pp. 741-745.

 

[19] A. Antal, V. Bota, and Ieee, "Performance Analysis of a HARQ Algorithm With Two-Hop Relaying," in 2018 12th International Conference on Communications, (IEEE International Conference on Communications. New York: Ieee, 2018, pp. 171-176.

 

[20] I. Ardelean, S. Miclaus, Ardelean, II, C. Moisescu, and Ieee, Magnetotactic bacteria and biogenic magnetite nanocrystals as potential contrast agents in magnetic resonance imaging (2018 Emf-Med 1st World Conference on Biomedical Applications of Electromagnetic Fields). New York: Ieee (in English), 2018.

 

[21] C. Avram, R. Miron, D. Radu, and A. Astilean, "Two-phase authentication and encryption algorithm for mobile users," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[22] B. Avram-Pop, S. Sabou, and L. A. Zima, The Influence of Culture on the Workforce in Romania (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 5956-5964.

 

[23] F. Babota and R. Darmon, Calculus and Analysis of Corrected Thermal Resistance in a Common Dwelling Building in Romania, with Various Forms of Thermal Insulation Attic Floor (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 155-160.

 

[24] F. Babota, D. L. Manea, C. Aciu, C. Munteanu, N. Cobirzan, and D. R. Tamas-Gavrea, "Determination of optimal dimensions of fixed shadowing systems (pergolas) to reduce energy consumption in buildings in Romania," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 358-363.

 

[25] F. Babota and L. Moga, "Computation and analysis of corrected thermal insulation in a common dwelling building in Romania, in various thermal insulation variants - The slab over the soil," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 352-357.

 

[26] L. A. Bacali, L. M. Nan, and E. S. Lakatos, "CURRENT APPROACHES TO THE ORIENTATION TOWARDS REQUIREMENTS IN THE DEVELOPMENT OF EDUCATIONAL SPACES AND ENVIRONMENT. SITE USAGE REQUIREMENTS," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 217-222.

 

[27] V. Bacu, A. Sabou, T. Stefanur, D. Gorgan, and O. Vaduvescu, "NEARBY Platform for Detecting Asteroids in Astronomical Images Using Cloud-based Containerized Applications," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 371-376.

 

[28] R. Badea, L. Vegh, L. Stanciu, and Ieee, "A Comparison of Image Resizing Performance for Ubiquitous Software Platforms," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 191-194.

 

[29] H. Balan, H. D. Laslo, I. Berinde, and Ieee, "Modeling Three-Phase Short-Circuits in Grids Connected to Windfarms," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[30] H. Balan, H. D. Laslo, T. Varodi, and Ieee, "Testing Digital Relays through Secondary Currents Injection," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[31] C. Balc, A. Cretu, D. Iudean, H. Laslo, S. Enyedi, and R. Munteanu, "Failure Modes and Effects Analysis for an Automatic Level Control System," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[32] D. Banabic and A. Kami, "Applications of the Gurson's model in sheet metal forming," in 5th International Conference on New Forming Technology, vol. 190, F. Vollertsen, T. A. Dean, Y. Qin, and S. J. Yuan Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[33] A. Baracu, R. Muller, R. C. Voicu, M. Pustan, C. Birleanu, and A. Dinescu, Manufacture and investigation of a Vertical MEMS switch (Cas 2018 Proceedings: 2018 International Semiconductor Conference). New York: Ieee (in English), 2018, pp. 299-302.

 

[34] B. Bargauan et al., Energy Management System for the Demand Response in TUCN Buildings (2018 53rd International Universities Power Engineering Conference). New York: Ieee (in English), 2018.

 

[35] C. Barz, C. Lung, O. Chiver, and C. K. Jalba, "The Development of an Intelligent Gripper with Freely Programmable Controls," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 479-482.

 

[36] O. B. Bercea, L. Bacali, E. S. Lakatos, L. A. Bacali, and R. L. Potra, "APPLICATION FOR CERTIFICATION AS A SOCIAL ENTERPRISE IN ROMANIA: ASSESSMENT OF THE ADMINISTRATIVE PROCESS," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 417-423.

 

[37] T. S. Besoiu and A. G. Popa, Progressive collapse resistance of a 13-story RC framed structure subjected to the simultaneous removal of multiple columns (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 167-172.

 

[38] M. Bica and D. Gorgan, "Data Locality Aware Algorithm for Task Execution on Distributed, Cloud Based Environments," in Complex, Intelligent, and Software Intensive Systems, Cisis-2017, vol. 611, L. Barolli and O. Terzo Eds., (Advances in Intelligent Systems and Computing. Berlin: Springer-Verlag Berlin, 2018, pp. 557-566.

 

[39] J. Bilbao, C. Feniser, O. Garcia, C. Rebollar, E. Bravo, and C. Varela, "MANAGEMENT APPLIED DIRECTLY TO UNIVERSITY WORLD: CHANCE TO EMPOWER STUDENTS," in 12th International Technology, Education and Development Conference, L. G. Chova, A. L. Martinez, and I. C. Torres Eds., (INTED Proceedings. Valenica: Iated-Int Assoc Technology Education & Development, 2018, pp. 5998-6001.

 

[40] I. Birlescu et al., "Kinematic Analysis for a Prostate Biopsy Parallel Robot Using Study Parameters," in Computational Kinematics, vol. 50, S. Zeghloul, L. Romdhane, and M. A. Laribi Eds., (Mechanisms and Machine Science. Cham: Springer International Publishing Ag, 2018, pp. 135-142.

 

[41] I. R. Birs, C. I. Muresan, O. Prodan, S. C. Folea, and C. Ionescu, "Structural vibration attenuation using a fractional order PD controller designed for a fractional order process," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 4, pp. 533-538, 2018, doi: 10.1016/j.ifacol.2018.06.150.

 

[42] I. Birs, C. Muresan, S. Folea, O. Prodan, C. Lonescu, and M. Assoc Comp, Fractional Order Modeling and Control of a Carrier Prototype for Targeted Drug Delivery (Iccbb 2018: Proceedings of the 2018 2nd International Conference on Computational Biology and Bioinformatics). New York: Assoc Computing Machinery (in English), 2018, pp. 1-5.

 

[43] I. Birs, C. Muresan, I. Nascu, S. Folea, C. Ionescu, and Ieee, "Experimental results of fractional order PI controller designed for second order plus dead time (SOPDT) processes," in 2018 15th International Conference on Control, Automation, Robotics and Vision, (International Conference on Control Automation Robotics and Vision. New York: Ieee, 2018, pp. 1143-1147.

 

[44] I. Birs, C. Muresan, O. Prodan, S. Folea, C. Ionescu, and Ieee, Analytical modeling and preliminary fractional order velocity control of a small scale submersible (2018 Sice International Symposium on Control Systems). New York: Ieee (in English), 2018, pp. 165-170.

 

[45] L. Bizo, K. Magyari, J. D. Chelaru, and O. Nemes, "Comparative study of structural and optical properties of zirconium-doped indium oxide synthesized by solid state reactions and sot-gel technique," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 167-172.

 

[46] A. Blaga, L. Tamas, and Ieee, "Augmented Reality for Digital Manufacturing," in 2018 26th Mediterranean Conference on Control and Automation, (Mediterranean Conference on Control and Automation. New York: Ieee, 2018, pp. 173-178.

 

[47] B. C. Z. Blaga, M. A. Deac, R. W. Y. Al-doori, M. Negru, and R. Danescu, "Miniature Autonomous Vehicle Development on Raspberry Pi," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 229-236.

 

[48] B. C. Z. Blaga and S. Nedevschi, "A Method for Automatic Pole Detection from Urban Video Scenes using Stereo Vision," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 293-300.

 

[49] G. D. Boca and S. Saracli, The Impact of Knowledge Management and Re-innovation Management (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 6097-6112.

 

[50] M. Bodea, "New weldability model based on the welding parameters and hardness profile," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 115-124.

 

[51] A. Bojita, C. Boianceanu, M. Purcar, C. Florea, D. Simon, and C. S. Plesa, "A simple metal-semiconductor substructure for the advanced thermo-mechanical numerical modeling of the power integrated circuits," (in English), Microelectronics Reliability, Article; Proceedings Paper vol. 87, pp. 142-150, Aug 2018, doi: 10.1016/j.microrel.2018.06.013.

 

[52] S. D. Bolboaca and L. Jantschi, "Helical structure of linear homopolymers," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 35-51.

 

[53] R. A. Boldizsar, M. Ordean, and C. Giurgea, "Designing, Implementing and Testing the Acoustic Component of a Text to Speech System for the Romanian Language," in Informatics in Economy, vol. 273, G. C. Silaghi, R. A. Buchmann, and C. Boja Eds., (Lecture Notes in Business Information Processing. Cham: Springer International Publishing Ag, 2018, pp. 101-114.

 

[54] D. Borza, T. Ileni, and A. Darabant, "A Deep Learning Approach to Hair Segmentation and Color Extraction from Facial Images," in Advanced Concepts for Intelligent Vision Systems, Acivs 2018, vol. 11182, J. BlancTalon, D. Helbert, W. Philips, D. Popescu, and P. Scheunders Eds., (Lecture Notes in Computer Science. Cham: Springer International Publishing Ag, 2018, pp. 438-449.

 

[55] D. Borza, R. Itu, and R. Danescu, Micro Expression Detection and Recognition from High Speed Cameras using Convolutional Neural Networks (Proceedings of the 13th International Joint Conference on Computer Vision, Imaging and Computer Graphics Theory and Applications). Setubal: Scitepress (in English), 2018, pp. 201-208.

 

[56] M. Botez, L. A. Bredean, and M. S. Buru, Reinforced Concrete Slab Subjected to Blast. Numerical Model Validation (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 197-202.

 

[57] C. I. Breban and N. S. Ungureanu, "MANAGEMENT OF READING PROCESS AND DATA PROCESSING ON GAS CONSUMPTION," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 599-602.

 

[58] R. Brehar, F. Vancea, T. Marita, and S. Nedevschi, "A Deep Learning Approach For Pedestrian Segmentation In Infrared Images," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 253-258.

 

[59] K. Brown, C. Feniser, and V. Lally, "BENCHMARKING E-LEARNING IN HIGHER EDUCATION: MEASURING VALUED ACTIVITIES OR VALUING MEASURED ACTIVITIES," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 432-441.

 

[60] K. Brown, C. Feniser, V. Lally, J. Bilbao, and A. Sadeh, "SHARING CULTURES AND SOCIETY IN TECHNOLOGY ENHANCED LEARNING MEDIATED ENVIRONMENTS," in 11th International Conference of Education, Research and Innovation, L. G. Chova, A. L. Martinez, and I. C. Torres Eds., (ICERI Proceedings. Valenica: Iated-Int Assoc Technology Education & Development, 2018, pp. 7369-7373.

 

[61] A. Buchman, C. Lung, and Ieee, "State of charge and state of health estimation of Lithium-Ion batteries," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 382-385.

 

[62] B. Bucur, I. Somfeleam, A. Ghiurutan, C. Lcmnaru, and M. Dinsoreanu, "An early fusion approach for multimodal emotion recognition using deep recurrent networks," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 71-78.

 

[63] V. Bucur, C. Dehelean, and L. Miclea, "Object Storage in the Cloud and Multi-cloud: State of the Art and the research challenges," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[64] A. Buda and A. Colesa, "File System Minifilter Based Data Leakage Prevention System," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[65] A. Bughesiu, "ONOMASTICS AND THE OCCULT: NAMES OF TAROT CARDS," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 714-722.

 

[66] A. Bumb, B. Iancu, and E. Cebuc, "Extending Cooja simulator with real weather and soil data," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[67] C. Butean and B. Heghes, "Flexure behavior of a hybrid reinforced concrete beam. Strain correlation between mechanical gauges and optical measurement," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 233-240.

 

[68] M. Butlewski, W. Czernecka, A. Pajzert, M. Radziejewska, M. Suszynski, and C. Feniser, "ERGONOMIC CRITERIA IN THE OPTIMIZATION OF ASSEMBLY PROCESSES," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 424-431.

 

[69] M. I. Buzdugan and Ieee, Review of Some Effects of Harmonics in Nonsinusoidal Systems (2018 Aeit International Annual Conference). New York: Ieee (in English), 2018.

 

[70] M. I. Buzdugan, R. A. Munteanu, and Ieee, "Influence of Harmonics on Heat Recovery Equipment," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[71] M. Buzdugan and Ieee, Some Effects of Harmonics on Low Voltage Loads (2018 Ieee International Conference and Workshop in Obuda on Electrical and Power Engineering). New York: Ieee (in English), 2018, pp. 73-78.

 

[72] R. Cajo, C. I. Muresan, C. M. Ionescu, R. De Keyser, and D. Plaza, "Multivariable Fractional Order PI Autotuning Method for Heterogeneous Dynamic Systems," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 4, pp. 865-870, 2018, doi: 10.1016/j.ifacol.2018.06.120.

 

[73] A. Calugaru, A. Peculea, V. T. Dadarlat, and E. Cebuc, "Real Time System for Detecting and Tracking People," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[74] G. Carbone, B. Gherman, I. Ulinici, C. Vaida, and D. Pisla, "Design Issues for an Inherently Safe Robotic Rehabilitation Device," in Advances in Service and Industrial Robotics, vol. 49, C. Ferraresi and G. Quaglia Eds., (Mechanisms and Machine Science. Cham: Springer International Publishing Ag, 2018, pp. 1025-1032.

 

[75] P. Cardei, L. C. Vladutoiu, G. Gheorghe, T. L. V. Fechete, and G. Chisiu, "Multidisciplinary Investigations Regarding the Wear of Machine Tools Operating Into the Soil," in 9th International Conference on Tribology, vol. 295, M. B. Karamis, F. Nair, S. Savas, A. Gocer, and M. Hamamci Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[76] V. Cebotari, F. Popa, T. F. Marinca, V. Popescu, and I. Chicinas, "Caracterisation of high manganese silicides prepared by mechanical milling," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 80-88.

 

[77] V. Ceclan and S. Grozav, "Determination of the force required for the hydroforming of al 99,5," in Innovative Technologies in Engineering Production, vol. 244, D. Stancekova et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[78] N. Cennamo et al., "Surface Plasmon Resonance Sensor in Plastic Optical Fibers. Influence of the Mechanical Support Geometry on the Performances," in Sensors, vol. 431, B. Ando, F. Baldini, C. DiNatale, G. Marrazza, and P. Siciliano Eds., (Lecture Notes in Electrical Engineering. New York: Springer, 2018, pp. 135-141.

 

[79] E. Ceuca, V. Trifa, O. Pop, and Ieee, "Design New Custom Interfaces for Selecting Magnetic Components in Switching Power Supplies," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[80] V. I. M. Chereja, A. I. Potarniche, S. A. Ranga, B. S. Kirei, M. D. Topa, and Ieee, "Power Dissipation Estimation of CMOS Digital Circuits at the Gate Level in VHDL," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 63-66.

 

[81] S. Chetan, C. Festila, E. H. Dulf, and R. Both-Rusu, "Analysis of a New Horizontal Axes Wind Turbine with 6/3 Blades," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[82] E. S. Chifu, V. R. Chifu, C. B. Pop, A. Vlad, and I. Salomie, "Machine Learning Based Technique for Detecting Daily Routine and Deviations," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 183-189.

 

[83] V. R. Chifu, C. B. Pop, A. Birladeanu, N. Dragoi, and I. Salomie, "Choice Function-based Constructive Hyper-Heuristic for Generating Personalized Healthy Menu Recommendations," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 111-118.

 

[84] V. Chifu, C. Pop, T. Cioara, I. Anghel, D. Moldovan, and I. Salomie, "Identifying the Polypharmacy Side-Effects in Daily Life Activities of Elders with Dementia," in Intelligent Distributed Computing Xii, vol. 798, J. DelSer, E. Osaba, M. N. Bilbao, J. J. SanchezMedina, M. Vecchio, and X. S. Yang Eds., (Studies in Computational Intelligence. Cham: Springer International Publishing Ag, 2018, pp. 380-389.

 

[85] C. G. Chiorean and S. M. Buru, Second-order flexibility-based model for nonlinear inelastic analysis of composite steel-concrete frameworks with partial composite action and semi-rigid connections (Proceedings of the 12th International Conference on Advances in Steel-Concrete Composite Structures). Valencia: Univ Politecnica Valencia (in English), 2018, pp. 213-220.

 

[86] O. Chiver, L. Neamt, B. Cristian, and E. Pop, "Study on the Autonomous Asynchronous Generator," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 863-866.

 

[87] T. Cioara et al., Enabling New Technologies for Demand Response Decentralized Validation using Blockchain (2018 Ieee International Conference on Environment and Electrical Engineering and 2018 Ieee Industrial and Commercial Power Systems Europe). New York: Ieee (in English), 2018.

 

[88] N. Ciont, N. Har, and M. Iliescu, "ON THE IMPORTANCE OF AGGREGATE MINERALOGY IN ASPHALT PAVEMENT DISTRESS," in Road and Rail Infrastructure V, S. Lakusic Ed., (Road and Rail Infrastructure. Zagreb: Univ Zagreb, Fac Civil Engineering, 2018, pp. 395-401.

 

[89] R. Ciorap, D. Andritoi, M. Ciorap, and M. Munteanu, "Monitoring System for Home-Based Hand Rehabilitation," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 836-839.

 

[90] C. Ciorca, V. Maier, S. G. Pavel, and H. G. Beleiu, "Dimensioning of the Vertical Earth Grounding with Rectangular Contour through Minimizing the Investments Costs," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 154-158.

 

[91] S. M. Ciornei, R. O. Nemes, M. Ruba, C. Husar, H. Hedesiu, and C. Martis, "Real-Time Simulation of a Complete Electric Vehicle Based on NI VeriStand Integration Platform," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 107-112.

 

[92] M. Ciotlaus and G. Kollo, "Ballast bed cleaning and recycling - influence on stability of continuously welded rail track," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 294-300.

 

[93] M. Ciupan, "Finite element analysis of the stress distribution in a representative elementary volume of mineral casting," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[94] T. Colosi, M. Abrudean, V. Muresan, I. Clitan, D. Sas, and M. L. Unguresan, "Extension of Mpdx matrix for 4th order partial differential equations with two independent variables," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[95] C. Constantinescu, C. Munteanu, C. Pacurar, and A. Racasan, "Influence of the Patch Antenna Feeding on their Parameters," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 235-240.

 

[96] A. Contan, C. Dehelean, and L. Miclea, "Test Automation Pyramid from Theory to Practice," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[97] D. Copandean, C. Nandra, D. Gorgan, and O. Vaduvescu, "Asteroids Detection Tehnique: Classic "Blink" An Automated Approch," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[98] C. Copot, C. Muresan, T. M. Thi, C. Ionescu, and Ieee, An application to robot manipulator joint control by using constrained PID based PSO (2018 Ieee 12th International Symposium on Applied Computational Intelligence and Informatics). New York: Ieee (in English), 2018, pp. 279-284.

 

[99] R. C. Cordos and B. L. Blaga, "PERFORMANCE MANAGEMENT AND ETHICS IN ORGANIZATIONS," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 329-334.

 

[100] I. A. Cosma, "Given names of students at the North University Centre of Baia Mare," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 74-91.

 

[101] O. Cosma, P. Pop, M. Oliviu, and I. Zelina, "A Hybrid Iterated Local Search for Solving a Particular Two-Stage Fixed-Charge Transportation Problem," in Hybrid Artificial Intelligent Systems, vol. 10870, F. J. D. Juez et al. Eds., (Lecture Notes in Artificial Intelligence. Cham: Springer International Publishing Ag, 2018, pp. 684-693.

 

[102] S. I. Cosman, V. I. Boanca, C. Oprea, and C. S. Martis, "Design, Building and Testing of a Low Voltage - High Current Drive for SRMs Used for HVAC Applications," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 58-62.

 

[103] S. I. Cosman, M. Dranca, R. Nemes, C. Martis, and Ieee, Design, building and testing a high voltage-low current drive for SRMs used for automotive applications (2018 Ieee International Conference on Environment and Electrical Engineering and 2018 Ieee Industrial and Commercial Power Systems Europe). New York: Ieee (in English), 2018.

 

[104] D. Cosovanu and D. Mandru, "Control System of a Soft Tube-Shaped Actuator based on SMA," in Mechatronics Systems and Materials 2018, vol. 2029, G. Robak, R. Pawliczek, A. Kurek, and T. Lagoda Eds., (AIP Conference Proceedings. Melville: Amer Inst Physics, 2018.

 

[105] M. Costandin, B. Costandin, and P. Dobra, "A New Orthogonalization And Sensor Fusion Algorithm For Attitude Estimation," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[106] M. Costandin, B. Costandin, and P. Dobra, "Non-linear Model, Simulation and Control of A New VTOL Vehicle Concept," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[107] M. Costandin, B. Costandin, P. Dobra, and Ieee, "Nonlinear Model and Trajectory Control of A Novel VTOL Vehicle II," in 2018 International Conference on Unmanned Aircraft Systems, (International Conference on Unmanned Aircraft Systems. New York: Ieee, 2018, pp. 806-815.

 

[108] A. D. Costea, A. Petrovai, S. Nedevschi, and Ieee, "Fusion Scheme for Semantic and Instance-level Segmentation," in 2018 21st International Conference on Intelligent Transportation Systems, (IEEE International Conference on Intelligent Transportation Systems-ITSC. New York: Ieee, 2018, pp. 3469-3475.

 

[109] A. Cotai, T. F. Marinca, and F. Popa, "Fe2O3 hematite quantity increase in quartz sand by heat treatments," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 105-114.

 

[110] F. Covaciu, A. Pisla, G. Carbone, F. Puskas, C. Vaida, and D. Pisla, "VR INTERFACE FOR COOPERATIVE ROBOTS APPLIED IN DYNAMIC ENVIRONMENTS," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[111] C. Cozma, "Anthroponyms belonging to the field of religion in Mihail Sadoveanu's writings," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1180-1194.

 

[112] E. M. Craciun, A. Rabaea, M. F. Popa, and C. I. Mihailov, "CRACK PROPAGATION IN THE HUMAN BONE. MODE I OF FRACTURE," (in English), Analele Stiintifice Ale Universitatii Ovidius Constanta-Seria Matematica, Article; Proceedings Paper vol. 26, no. 2, pp. 59-70, 2018, doi: 10.2478/auom-2018-0018.

 

[113] R. Crisan, G. Harja, I. Nascu, and I. Nicoara, "Hierarchical Control System for Energy Savings in Wastewater Treatment Plant," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[114] S. Crisan, B. Tebrean, T. E. Crisan, and Ieee, Multimodal Liveness Detection System for Hand Vein Biometrics (2018 Ieee International Symposium on Medical Measurements and Applications). New York: Ieee (in English), 2018, pp. 394-399.

 

[115] A. Cristian, R. B. Roxana, D. Eva-Henrietta, and C. R. Ioan, "Lung Cancer Diagnosis based on Ultrasound image processing," in 2018 22nd International Conference on System Theory, Control and Computing, M. Barbu, R. Solea, and A. Filipescu Eds., (International Conference on System Theory Control and Computing. New York: Ieee, 2018, pp. 73-78.

 

[116] P. Cristian et al., "CoolCloudSim: Integrating Cooling System Models in CloudSim," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 387-394.

 

[117] C. Cristoreanu, "The dichotomy sacred-profane as reflected in pupils' choice of usernames in online games," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 92-103.

 

[118] L. Czumbil et al., Numerical Stability Studies for AC and DC Electrical Circuits (2018 53rd International Universities Power Engineering Conference). New York: Ieee (in English), 2018.

 

[119] M. Dancs and G. Onul, "Log cottage - a case study," in 3rd China-Romania Science and Technology Seminar, vol. 399, I. V. Abrudan, T. Shi, S. Lache, Y. Wu, R. Muntean, and G. Oancea Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[120] P. C. Darab, "Strategies for Charging Electric Vehicles in Smart Grid," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 1019-1022.

 

[121] M. Daraban, G. Chindris, A. Taut, L. Viman, and Ieee, "Uncertainty Budget for Hardware-In-the-Loop Test System," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[122] L. Darabant and L. Czumbil, "Modeling the Symmetrization of Single Phase Receivers Using OrCAD A New Approach in Teaching Electrical Engineering," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 840-845.

 

[123] R. Darmon, "Evacuation strategy design for a medium size auditorium using CFD," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 241-248.

 

[124] R. Darmon and F. Babota, The assessment of fire safety measures in service risers (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 243-248.

 

[125] R. Darmon and M. Suciu, "Smoke ventilation strategy for a timber structure building," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 249-255.

 

[126] I. David, "Manifestations of the sacred and the profane in phrases with proper names," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 104-116.

 

[127] R. De Keyser, C. I. Muresan, and C. M. Ionescu, "Autotuning of a Robust Fractional Order PID Controller," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 25, pp. 466-471, 2018, doi: 10.1016/j.ifacol.2018.11.181.

 

[128] R. De Keyser, C. I. Muresan, C. M. Ionescu, and Ieee, Efficient Disturbance Rejection for Dead-Time Processes using Internal Model Control (2018 Sice International Symposium on Control Systems). New York: Ieee (in English), 2018, pp. 213-219.

 

[129] O. Denes, L. Plesa, and D. L. Manea, Ecological thermal insulation materials based on sheep wool (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 249-254.

 

[130] M. M. Dietrich and M. S. Popa, "Measurement loop, automatic tuning and product quality tracking," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[131] F. Dinu, I. Marginean, I. Petran, M. Senila, C. Neagu, and D. Dubina, DEVELOPMENT OF ALTERNATE LOAD PATHS IN STEEL FRAMES WITH COMPOSITE BEAMS SUBJECT TO ACCIDENTAL EXPLOSIONS (Irf2018: Proceedings of the 6th International Conference on Integrity-Reliability-Failure). Porto: Inegi-Inst Engenharia Mecanica E Gestao Industrial (in English), 2018, pp. 581-582.

 

[132] A. K. Diop, S. Meza, M. Gordan, A. Vlaicu, and Ieee, "LDA Based Classification of Video Surveillance Sequences Using Motion Information," in 2018 20th International Conference on Advanced Communication Technology, (International Conference on Advanced Communication Technology. New York: Ieee, 2018, pp. 499-502.

 

[133] M. Dobra, D. L. Sabau, and M. Anton, "Model-based observer design evaluation for x-y positioning systems," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[134] S. Dolean, M. Dinsoreanu, R. C. Muresan, A. Geiszt, R. Potolea, and I. Tincas, "A Scaled-Correlation Based Approach for Defining and Analyzing Functional Networks," in New Frontiers in Mining Complex Patterns, Nfmcp 2017, vol. 10785, A. Appice, C. Loglisci, G. Manco, E. Masciari, and Z. W. Ras Eds., (Lecture Notes in Artificial Intelligence. Cham: Springer International Publishing Ag, 2018, pp. 80-92.

 

[135] D. Domnita and C. Oprisa, "A Genetic Algorithm for Obtaining Memory Constrained Near-Perfect Hashing," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[136] P. Dragan, M. Stanese, and I. Nascu, "Camera-based liquid level measurement using the refractive properties of the medium," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[137] D. Dragomir, E. Campean, G. Pop, M. Dragomir, and I. Ambros, "DESIGNING A TOOLKIT FOR PROCESS IMPROVEMENT IN AN ENGINEERING SERVICES START-UP," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 448-452.

 

[138] M. A. Dranca, M. Chirca, S. I. Cosman, S. Breban, and Ieee, "Design Analysis of a Permanent Magnet Brushless Generator with Two Counter Rotating Rotors for Small-Wind Turbine," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[139] M. A. Dranca, M. M. Radulescu, and Ieee, Comparative Design Analysis of Three-Phase Switched Reluctance Generators for Micro-Wind Power Applications (2018 Xiii International Conference on Electrical Machines). New York: Ieee (in English), 2018, pp. 597-601.

 

[140] M. Dranca, M. Chirca, S. Breban, and Ieee, "Design evaluation of several electric machines topologies for propulsion of a railway vehicle," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[141] R. F. Drenta and V. Birle, "FISCAL MANAGEMENT FROM THE PERSPECTIVE OF PRACTICAL APPROACHING OF FISCAL EQUITY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 377-383.

 

[142] M. Dulau, M. Karoly, and T. M. Dulau, "Fluid temperature control using heat exchanger," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 498-505.

 

[143] E. H. Dulf and L. Kovacs, "Fractional Order Control of the Cyber-Physical Cryogenic Isotope Separation Columns Cascade System," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[144] E. H. Dulf, M. Susca, and L. Kovacs, "Novel Optimum Magnitude Based Fractional Order Controller Design Method," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 4, pp. 912-917, 2018, doi: 10.1016/j.ifacol.2018.06.107.

 

[145] M. F. Enache, D. Al-Janabi, and T. S. Letia, "Railway Modeling with Object Enhanced Time Petri Nets," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[146] S. Enyedi, "Electric Cars - Challenges and Trends," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[147] M. Essaid, L. Idoumghar, J. Lepagnot, M. Brevilliers, D. Foderean, and Ieee, A hybrid differential evolution algorithm for real world problems (2018 Ieee Congress on Evolutionary Computation). New York: Ieee (in English), 2018, pp. 2341-2347.

 

[148] M. Essaid, L. Idoumghar, J. Lepagnot, M. Brevilliers, and D. Fodorean, "A Hybrid Optimization Algorithm for Electric Motor Design," in Computational Science - Iccs 2018, Pt Ii, vol. 10861, Y. Shi et al. Eds., (Lecture Notes in Computer Science. Cham: Springer International Publishing Ag, 2018, pp. 501-517.

 

[149] A. Falaus and L. Todea, "NAMES AND IDENTITY: ABORIGINAL CANADIAN TRADITIONS OF NAME-GIVING," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 147-156.

 

[150] A. Fanca, A. Puscasiu, S. Folea, and H. Valean, "Trauma Accident Detecting and Reporting System," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[151] A. Fanca, A. Puscasiu, D. I. Gota, H. Valean, and Ieee, Evaluating data accuracy of built-in smartphone sensors for mobile applications (2018 26th Telecommunications Forum). New York: Ieee (in English), 2018, pp. 879-882.

 

[152] P. Farago, R. Galatus, M. Cirlugea, and S. Hintea, "Fluorescent Fiber Implementation of an Angle Sensor," in 2018 20th Anniversary International Conference on Transparent Optical Networks, M. Jaworski and M. Marciniak Eds., (International Conference on Transparent Optical Networks-ICTON. New York: Ieee, 2018.

 

[153] P. Farago, R. Galatus, S. Hintea, J. C. Martin, and J. Valles, "Fluorescent Fiber Implementation of a High-resolution Distributed Position Sensor," in Optical Sensing and Detection V, vol. 10680, F. Berghmans and A. G. Mignani Eds., (Proceedings of SPIE. Bellingham: Spie-Int Soc Optical Engineering, 2018.

 

[154] P. Farago, R. Groza, C. Ignat, M. Cirlugea, S. Hintea, and Ieee, A Fuzzy Expert System for Infection Screening Based on Vital Signs and Activity Data (2018 41st International Conference on Telecommunications and Signal Processing). New York: Ieee (in English), 2018, pp. 581-584.

 

[155] C. Farcas, I. Ciocan, A. Tulbure, and Ieee, "Solar Emulator for a Photovoltaic Module," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 314-318.

 

[156] R. G. Farcas, M. Bondrea, A. Porutiu, P. Sestras, and S. Nas, Implementation of a Flooding Study in a Salt Exploitation Perimeter (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 33-38.

 

[157] A. S. Faur, M. S. Popa, B. C. Luca, I. D. Voina, and D. Bizubac, "Research on the influence of a new tap drill geometry on C45, 42CrMo4 and X5CrNi8 steel processing," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[158] A. Fazakas, C. Vonsza, M. Purcar, and Ieee, "Electrolytic Capacitor Polarity Determination based on Electrical Measurements," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 343-348.

 

[159] L. V. Fechete Tutunaru, N. Filip, E. M. Nagy, and M. Matache, "INFLUENCE OF INPUT FLOW OVER GRAIN MILL EFFICIENCY UTILISATION," in Actual Tasks on Agricultural Engineering, vol. 46, N. Bilandzija Ed., (Actual Tasks on Agricultural Engineering-Zagreb. 10000 Zagreb: Agronomski Fakultet Sveucilista U Zagrebu, 2018, pp. 439-446.

 

[160] D. Felecan, "Given names - between sacred and profane. Theoretical approach," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 19-34.

 

[161] N. Felecan, "Sacred and profane in oikonymy. Etymological aspects," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 601-610.

 

[162] O. Felecan, "Sacred and profane aspects in Transylvanian urban toponymy," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 611-621.

 

[163] G. X. Feng, L. Busoniu, T. M. Guerra, S. Mohammad, and Ieee, "Reinforcement Learning for Energy Optimization Under Human Fatigue Constraints of Power-Assisted Wheelchairs," in 2018 Annual American Control Conference, (Proceedings of the American Control Conference. New York: Ieee, 2018, pp. 4117-4122.

 

[164] G. X. Feng, T. M. Guerra, S. Mohammad, and L. Busoniu, "Observer-Based Assistive Control Design Under Time-Varying Sampling for Power Assisted Wheelchairs," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 10, pp. 151-156, 2018, doi: 10.1016/j.ifacol.2018.06.253.

 

[165] C. Feniser et al., "IS FLIPPED CLASSROOM AN EFFECTIVE MODEL TO RESPOND TO THE TRAINING REQUIREMENTS OF OUR CENTURY'S ENGINEERING?," in Edulearn18: 10th International Conference on Education and New Learning Technologies, L. G. Chova, A. L. Martinez, and I. C. Torres Eds., (EDULEARN Proceedings. Valenica: Iated-Int Assoc Technology Education & Development, 2018, pp. 5024-5031.

 

[166] C. Feniser, S. Dusa, and A. Sadeh, Factors That Determine Innovation in the Hospitality Industry from a Managerial Perspective (Proceedings of the International Conference on Tourism Research, Ictr 2018). Nr Reading: Acad Conferences Ltd (in English), 2018, pp. 41-47.

 

[167] R. Fernea, I. Florea, D. L. Manea, P. Pascuta, and D. R. Tamas-Gavrea, "X-ray diffraction study on new organic-natural building materials," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 372-379.

 

[168] R. Fernea, D. R. Tamas-Gavrea, D. L. Manea, L. M. Molnar, C. Munteanu, and A. E. Tiuc, "The influence of the binder and volcanic rocks in natural-organic building materials," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 364-371.

 

[169] R. Fernea, D. R. Tamas-Gavrea, A. E. Tiuc, and D. Manea, The impact of volcanic rocks on sustainable building materials based on hemp and lime (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 261-266.

 

[170] V. Firescu, "NEW ERGONOMICS APPROACHES - OPPORTUNITIES FOR INCREASING ROMANIAN ORGANIZATIONS' PERFORMANCE," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 511-516.

 

[171] R. Fizesan, O. Pop, and Ieee, "PI Timing Measurements in High Speed Flash Memory Embedded Systems," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 284-287.

 

[172] H. Florea, R. Varga, and S. Nedevschi, "Environment Perception Architecture using Images and 3D Data," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 223-228.

 

[173] M. Florin, G. V. Teodor, and G. E. Florina, "REDUCE ANXIETY AND STRESS IN BIATHLON - SKIING' ATHLETES USING MENTAL TRAINING," in Erd 2017 - Education, Reflection, Development, Fifth Edition, vol. 41, V. Chis and I. Albulescu Eds., (European Proceedings of Social and Behavioural Sciences. Nicosia: Future Acad, 2018, pp. 441-448.

 

[174] P. P. Florin, R. Mircea, P. Adrian-Cornel, R. Martis, C. Martis, and Ieee, Comparative analysis for an electric power steering system (2018 Xiii International Conference on Electrical Machines). New York: Ieee (in English), 2018, pp. 590-596.

 

[175] P. P. Florin, R. Mircea, N. Raul, C. Martis, P. Adrian-Cornel, and Ieee, Real-time Model in the Loop analysis of PMSM for electric power steering system based on FPGA implementation (2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee (in English), 2018, pp. 1358-1363.

 

[176] A. Fodor, R. Jano, and Ieee, "Thermal Characterization of Passive Cooling Techniques for High-Power Component Clusters," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 209-212.

 

[177] D. Fodorean, R. C. Nacu, V. Chindris, and Ieee, Development of High-Frequency Modular Power Control Unit for Real-Time Testing of a High-Speed Electric Motor (2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee (in English), 2018, pp. 919-924.

 

[178] A. Fratean and P. Dobra, "The impact of control strategies upon the energy flexibility of nearly zero-energy buildings Energy consumption minimization versus indoor thermal comfort maximization," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[179] A. O. Fulop and L. Tamas, "Lessons Learned from Lightweight CNN Based Object Recognition for Mobile Robots," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[180] C. D. Galatanu, I. Gherasim, D. Beu, D. D. Lucache, and Ieee, Luminance field of the facades: from aggressive to attractive lighting (2018 Ieee International Conference on Environment and Electrical Engineering and 2018 Ieee Industrial and Commercial Power Systems Europe). New York: Ieee (in English), 2018.

 

[181] R. Galatus, P. Farago, and J. Valles, "Optical Data Transmission with Plastic Scintillating Fibers," in Fiber Lasers and Glass Photonics: Materials through Applications, vol. 10683, S. Taccheo, J. I. Mackenzie, and M. Ferrari Eds., (Proceedings of SPIE. Bellingham: Spie-Int Soc Optical Engineering, 2018.

 

[182] V. N. Ganea, "Sacred and profane in the system of surnames on Salautei Valley," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 157-164.

 

[183] V. A. Gavrilas, L. O. Marian, and K. Al-Akel, "SERVICES OFFERED BY THE MEDICINE SUPPLIERS FROM THE PHARMACIST'S POINT OF VIEW," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 230-237.

 

[184] M. T. Ghemis, A. A. Scurt, C. Bob, and C. Bungau, An analysis of sustainability about rehabilitation and reconversion of an old building (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 273-278.

 

[185] M. Gherasim and A. Pisla, "NEURO-LINGUISTIC PROGRAMMING AND MANAGEMENT PERFORMANCE," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 14-18.

 

[186] B. Gherman et al., MODELLING AND SIMULATION OF A ROBOTIC SYSTEM FOR LOWER LIMB REHABILITATION (Proceedings of the Asme International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2018, Vol 5b). New York: Amer Soc Mechanical Engineers (in English), 2018.

 

[187] T. Gherman, D. Petreus, T. Patarau, A. Ignat, and Ieee, "A study of an Electrical Vehicle Battery Charger's DC-DC Stage," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[188] T. Gherman, M. Ricco, J. H. Meng, R. Teodorescu, D. Petreus, and Ieee, "Smart Integrated Charger with Wireless BMS for EVs," in Iecon 2018 - 44th Annual Conference of the Ieee Industrial Electronics Society, (IEEE Industrial Electronics Society. New York: Ieee, 2018, pp. 2151-2156.

 

[189] F. Ghita, R. Martis, F. P. Pop, C. Martis, B. Varaticeanu, and P. Minciunescu, "Soft Magnetic Composites in the design of Permanent Magnet Synchronous Actuators," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 97-102.

 

[190] A. M. Giurgiu and L. O. Marian, "PERFORMANCE MANAGEMENT OR MANAGEMENT PERFORMANCE AT THE CHAMBER OF COMMERCE IN MURES COUNTY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 250-257.

 

[191] M. Gliga, S. Andreica, C. Constantinescu, and C. Munteanu, "Study of Conducted Electromagnetic Emissions in Automotive Applications using an Artificial Network," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 493-497.

 

[192] G. Glodeanu, "Sacred and profane in the names of Mircea Eliade's characters," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1195-1200.

 

[193] S. E. C. Goga and S. Nedevschi, "Fusing semantic labeled camera images and 3D LiDAR data for the detection of urban curbs," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 301-308.

 

[194] A. Grama et al., "Smart Bike Improvement Using Embedded Systems," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[195] L. Grama, C. Rusu, and Ieee, "Adding audio capabilities to TIAGo service robot," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 263-266.

 

[196] M. Granzotto, R. Postoyan, L. Busoniu, D. Nesic, J. Daafouz, and Ieee, "Stability analysis of discrete-time finite-horizon discounted optimal control," in 2018 Ieee Conference on Decision and Control, (IEEE Conference on Decision and Control. New York: Ieee, 2018, pp. 2322-2327.

 

[197] D. O. Graur, R. A. Maris, R. Potolea, M. Dinsoreanu, and C. Lemnaru, "Complex Localization in the Multiple Instance Learning Context," in New Frontiers in Mining Complex Patterns, Nfmcp 2017, vol. 10785, A. Appice, C. Loglisci, G. Manco, E. Masciari, and Z. W. Ras Eds., (Lecture Notes in Artificial Intelligence. Cham: Springer International Publishing Ag, 2018, pp. 93-106.

 

[198] F. Graur, E. Radu, N. Al Hajjar, C. Vaida, and D. Pisla, "Surgical Robotics-Past, Present and Future," in New Trends in Medical and Service Robots: Design, Analysis and Control, vol. 48, M. Husty and M. Hofbaur Eds., (Mechanisms and Machine Science. Cham: Springer International Publishing Ag, 2018, pp. 159-171.

 

[199] E. F. Grosu, F. C. Motica, M. N. Ordean, and V. T. Grosu, "Increase Performances in Ski-Biathlon by Reducing Anxiety Stress Using Mental Training Techniques," in Proceedings of the 14th International Scientific Conference Elearning and Software for Education: Elearning Challenges and New Horizons, Vol 3, I. Roceanu, D. Beligan, T. Chicioreanu, M. Blaga, M. Stanescu, and C. Corciova Eds., (eLearning and Software for Education. Bucharest: Carol I Natl Defence Univ Publishing House, 2018, pp. 268-273.

 

[200] A. Groza, P. Ozturk, R. R. Slavcscu, A. Marginean, and R. Prasath, "Analysing climate change arguments using subjective logic," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 37-44.

 

[201] A. Groza, O. M. Popa, and Ieee, "The impact of summarisation on textual entailment - a case study on global warming arguments," in Proceedings of the 2018 10th International Conference on Electronics, Computers and Artificial Intelligence, (International Conference on Electronics Computers and Artificial Intelligence. New York: Ieee, 2018.

 

[202] R. Groza and P. Farago, "Low power current-mode analog front-end for biomedical applications," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[203] T. Gyorgy, D. Fodorean, and Ieee, Human-in-the-Loop simulation of an electric vehicle drivetrain (2018 Xiii International Conference on Electrical Machines). New York: Ieee (in English), 2018, pp. 1545-1550.

 

[204] O. Hancu, C. R. Rad, C. Lapusan, and C. Brisan, "Aspects concerning the optimal development of robotic systems architecture for waste sorting tasks," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[205] V. Hategan, A. Peculea, V. T. Dadarlat, and E. Cebuc, "Secure and Extensible Smart Home Template," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[206] M. Heilmann, F. Nasaireh, and I. Rasa, "Complements to Voronovskaya's Formula," in Mathematics and Computing, vol. 253, D. Ghosh, D. Giri, R. N. Mohapatra, K. Sakurai, E. Savas, and T. Som Eds., (Springer Proceedings in Mathematics & Statistics. New York: Springer, 2018, pp. 127-134.

 

[207] R. Helbet, A. C. Bechet, D. Stratakis, P. Bechet, and S. Miclaus, "An Analysis of the Spatial-Temporal Variability of the Near Field Components in the Proximity of a TETRA Portable Terminal," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 149-153.

 

[208] S. Herle, "Movement intention detection from SEMG signals using time-domain features and discriminant analysis classifiers," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[209] R. Hristu, B. Paun, L. Eftimie, S. G. Stanciu, D. E. Tranca, and G. A. Stanciu, "Changes in the Collagen Structure of Thyroid Nodule Capsules Determined by Polarization-Resolved Second Harmonic Generation Microscopy," in 2018 20th Anniversary International Conference on Transparent Optical Networks, M. Jaworski and M. Marciniak Eds., (International Conference on Transparent Optical Networks-ICTON. New York: Ieee, 2018.

 

[210] M. Hulea, O. Rosu, R. Miron, and A. Astilean, "Pharmaceutical Cold Chain Management Platform Based on a Distributed Ledger," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[211] A. Ianosi-Andreeva-Dimitrova, P. M. Velich, and D. S. Mandru, "Guidance System for Sight-Impaired People," in Mechatronics Systems and Materials 2018, vol. 2029, G. Robak, R. Pawliczek, A. Kurek, and T. Lagoda Eds., (AIP Conference Proceedings. Melville: Amer Inst Physics, 2018.

 

[212] A. Ignat, E. Lazar, D. Petreus, and Ieee, "Energy Management for an Islanded Microgrid Based on Particle Swarm Optimization," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 213-216.

 

[213] M. M. Ignat, "Sacred and profane in the tradition of giving first names in the Land of Chioar," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 175-185.

 

[214] I. Ilea, L. Bombrun, S. Said, Y. Berthoumieu, and Ieee, "Covariance matrices encoding based on the log-Euclidean and affine invariant Riemannian metrics," in Proceedings 2018 Ieee/Cvf Conference on Computer Vision and Pattern Recognition Workshops, (IEEE Computer Society Conference on Computer Vision and Pattern Recognition Workshops. New York: Ieee, 2018, pp. 506-515.

 

[215] M. A. Ilie, P. Dan, L. Viman, and Ieee, "Impedance Meter based on IQ Demodulators," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[216] A. S. Iliescu, "Sacred vs. profane in nicknames of Romanian politicians," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 186-197.

 

[217] B. Illes et al., "Publication Techniques for Young Scientists in the Field of Microelectronics Engineering," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 142-147.

 

[218] A. Ilovan and B. Iancu, "Penetration Testing Solution for Wireless Networks using mobile devices," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[219] S. Ilut, "Diminutive first names between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 198-208.

 

[220] D. A. Ilutiu-Varvara, C. Aciu, C. M. Marza, I. M. Sas-Boca, and M. Tintelecan, "Assessment of recycling potential of the oily mill scale in the steelmaking industry," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 228-232.

 

[221] R. A. Inte, F. N. Jurca, C. Martis, and Ieee, "Comparative Performance Evaluation of Synchronous Reluctance Machine with Outer Rotor Versus Inner Rotor," in 2018 Ieee International Energy Conference, (IEEE International Energy Conference. New York: Ieee, 2018.

 

[222] R. Inte, F. N. Jurca, and C. Martis, A Study of the Rotor Design Influence in Power Factor Value of ORSynRM (12th International Conference Elektro 2018). New York: Ieee (in English), 2018.

 

[223] C. M. Ionescu, D. Copot, M. Neckebroek, and C. I. Muresan, "Anesthesia regulation: towards completing the picture," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[224] D. Isoc, "Expert System for Predictive Diagnosis (1) Principles and Knowledge Base," in Soft Computing Applications, Sofa 2016, Vol 1, vol. 633, V. E. Balas, L. C. Jain, and M. M. Balas Eds., (Advances in Intelligent Systems and Computing. Cham: Springer International Publishing Ag, 2018, pp. 18-33.

 

[225] D. Isoc, "Expert System for Predictive Diagnosis (2) Implementing, Testing, Using," in Soft Computing Applications, Sofa 2016, Vol 1, vol. 633, V. E. Balas, L. C. Jain, and M. M. Balas Eds., (Advances in Intelligent Systems and Computing. Cham: Springer International Publishing Ag, 2018, pp. 34-46.

 

[226] D. Isoc, "Plagiarism Deterring by Using a Sociocybernetic System," in Teaching and Learning in a Digital World, Vol 1, vol. 715, M. E. Auer, D. Guralnick, and I. Simonics Eds., (Advances in Intelligent Systems and Computing. Cham: Springer International Publishing Ag, 2018, pp. 239-251.

 

[227] D. Isoc, "Training Using Professional Simulators in Engineering Education: A Solution and a Case Study," in Teaching and Learning in a Digital World, Vol 1, vol. 715, M. E. Auer, D. Guralnick, and I. Simonics Eds., (Advances in Intelligent Systems and Computing. Cham: Springer International Publishing Ag, 2018, pp. 208-217.

 

[228] C. Iuga, P. Dragan, and L. Busoniu, "Fall monitoring and detection for at-risk persons using a UAV," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 10, pp. 199-204, 2018, doi: 10.1016/j.ifacol.2018.06.262.

 

[229] B. Iulian et al., "Assesment of the Near Field Level in the Vicinity of an Inverted V Antenna used for HF emission," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[230] A. R. Iusan and N. M. Birlea, "Measuring skin's electrical properties with ECG electrodes The skin's electrical properties under ECG electrodes," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 708-711.

 

[231] L. N. Ivanciu, E. Sipos, and I. N. C. Destech Publications, "Hybrid System for Dropout Risk Evaluation of First Year Students," in 2018 2nd International Conference on Applied Mathematics, Modeling and Simulation, vol. 305, (DEStech Transactions on Computer Science and Engineering. Lancaster: Destech Publications, Inc, 2018, pp. 74-78.

 

[232] R. Jurca, T. Cioara, I. Anghel, M. Antal, C. Pop, and D. Moldovan, "Activities of Daily Living Classification using Recurrent Neural Networks," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[233] B. M. Jurchis, N. Burnete, N. V. Burnete, and C. D. Iclodean, "Particulate matter emission characteristics for a compression ignition engine fueled with a blend of biodiesel and diesel," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[234] D. I. Jurj, D. D. Micu, and A. Muresan, "Overview of Electrical Energy Forecasting Methods and Models in Renewable Energy," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 87-90.

 

[235] A. Kami and D. Banabic, "Experimental Formability Analysis of Bondal Sandwich Sheet," in Proceedings of 21st International Esaform Conference on Material Forming, vol. 1960, L. Fratini, R. DiLorenzo, G. Buffa, and G. Ingarao Eds., (AIP Conference Proceedings. Melville: Amer Inst Physics, 2018.

 

[236] A. Karam, M. Liviu, V. Cristina, and H. Radu, "The contribution of lean manufacturing tools to changeover time decrease in the pharmaceutical industry. A SMED project," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 886-892.

 

[237] A. O. Kilyen and T. S. Letia, "Hybrid robot controller synthesis with GP and UETPN," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[238] A. O. Kilyen and T. S. Letia, "Interactive development of cyber physical systems using UETPN model," in Proceedings of the 2018 Federated Conference on Computer Science and Information Systems, M. Ganzha, L. Maciaszek, and M. Paprzycki Eds., (Federated Conference on Computer Science and Information Systems. New York: Ieee, 2018, pp. 1035-1042.

 

[239] S. A. Kollo, A. Puskas, and G. Kollo, "Calculation methods and technological applications creating sustainable railway tracks satisfying the modem operational demands," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 380-383.

 

[240] L. Kopenetz, M. F. Prada, and R. Fortis, Wooden spatial articulated structures (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 303-308.

 

[241] I. Kovacs, M. Neag, and Ieee, "New dual-loop topology for ring VCOs based on latched delay cells," in 2018 Ieee International Symposium on Circuits and Systems, (IEEE International Symposium on Circuits and Systems. New York: Ieee, 2018.

 

[242] I. Kovacs, M. Topa, E. David, A. Buzo, G. Pelz, and Ieee, Improved Pareto Chart Analysis for Yield Detractors' Identification (2018 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee (in English), 2018.

 

[243] P. Kriz, K. Riha, M. K. Dutta, A. Singh, N. Marius, and Ieee, Determination of a Person's Height from Images Using a Known Object Size (2018 41st International Conference on Telecommunications and Signal Processing). New York: Ieee (in English), 2018, pp. 384-387.

 

[244] B. L. Kurth, M. Maftei, D. Maier, and A. Maier, "A STUDY OF THE KNOWLEDGE OF THE LEGAL OBLIGATION OF PUBLIC AUTHORITIES TO SERVE AS A MODEL IN THE FIELD OF ENERGY EFFICIENCY," in Basiq International Conference: New Trends in Sustainable Business and Consumption 2018, R. Pamfilie, V. Dinu, L. Tachiciu, D. Plesea, and C. Vasiliu Eds., (Proceedings of BASIQ. Bucuresti: Editura Ase, 2018, pp. 490-496.

 

[245] A. Laczko, S. Brisset, and M. Radulescu, "Design of a brushless DC permanent-magnet generator for use in micro-wind turbine applications," (in English), International Journal of Applied Electromagnetics and Mechanics, Article; Proceedings Paper vol. 56, pp. S3-S15, 2018, doi: 10.3233/jae-172279.

 

[246] C. C. Lang and S. Brad, "CONVERGENCE OF LABOUR PRODUCTIVITY INDICATORS, AN IMPORTANT ELEMENT IN PERFORMANCE MANAGEMENT," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 370-376.

 

[247] C. C. Lang and S. Brad, "ELIMINATING THE LIMITS IN DECISION MAKING USING THE ADVANTAGES OF MEDIATION AS AN ALTERNATIVE WAY TO RESOLVE CONFLICTS," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 275-282.

 

[248] C. Lapusan, C. Rad, O. Hancu, and C. Brisan, "Vision-based robotic cell design for automated waste manipulation," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[249] A. V. Lapuste, "System analysis and contributions to the consolidation under exploitation of surface elements," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 406-412.

 

[250] T. Laurain, J. Lauber, Z. Lendek, and R. Palhares, "Air-fuel ratio fuzzy controller handling delay: Comparison with a PI/Smith," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[251] T. Laurain, Z. Lendek, J. Lauber, R. M. Palhares, and Ieee, "Transforming variable transport delays into fixed ones: An application to a conveyor belt problem," in 2018 Annual American Control Conference, (Proceedings of the American Control Conference. New York: Ieee, 2018, pp. 3969-3974.

 

[252] E. Lazar, A. Ignat, D. Petreus, R. Etz, and Ieee, "Energy Management for an Islanded Microgrid Based on Harmony Search Algorithm," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[253] V. A. Lazar et al., "Experimental Characterization of Assisted Human Arm Exercises," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[254] A. Lazarescu, H. Szilagyi, A. Ioani, and C. Baera, "Parameters Affecting the Mechanical Properties of Fly Ash-Based Geopolymer Binders - Experimental Results," in Euroinvent Icir 2018, vol. 374, A. V. Sandu, M. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[255] L. Lefkovits, S. Lefkovits, and S. Emerich, "Biometric Identification Based on Feature Fusion with PCA and SVM," in Tenth International Conference on Machine Vision, vol. 10696, A. Verikas, P. Radeva, D. Nikolaev, and J. Zhou Eds., (Proceedings of SPIE. Bellingham: Spie-Int Soc Optical Engineering, 2018.

 

[256] S. Lefkovits, S. Emerich, and L. Szilagyi, "Biometric System Based on Registration of Dorsal Hand Vein Configurations," in Image and Video Technology, vol. 10799, S. Satoh Ed., (Lecture Notes in Computer Science. Cham: Springer International Publishing Ag, 2018, pp. 17-29.

 

[257] T. R. Lehene, V. Samoila, V. F. Soporan, S. Paduretu, and M. M. Vescan, "Critical Thinking on the Introduction of Digitization Within Engineering Training Systems in the Manufacturing Stage of Cast Parts," in Euroinvent Icir 2018, vol. 374, A. V. Sandu, M. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[258] T. S. Letia and D. Al-Janabi, "Object Enhanced Time Petri Net Models," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[259] T. S. Letia and A. O. Kilyen, "Using Unified Enhanced Time Petri Net Models for Cyber-Physical System Development," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 2, pp. 248-253, 2018, doi: 10.1016/j.ifacol.2018.03.043.

 

[260] M. Lihet and V. Dadarlat, "Honeypot in the cloud Five years of data analysis," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[261] A. Lodin, L. Grama, C. Rusu, and Ieee, "From bulky analog active filters to digital filters," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 271-274.

 

[262] E. F. Luchian, I. A. Ivanciu, A. M. Pop, V. Dobrota, and Ieee, "Context-Based Routing Algorithm for SIP-Based Infotainment in a Smart Vehicle," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 183-186.

 

[263] E. F. Luchian, A. Taut, I. A. Ivanciu, G. Lazar, V. Dobrota, and Ieee, Z-Wave-Based Vehicular Blackbox with Automatic Emergency Assistance (2018 Ieee International Symposium on Local and Metropolitan Area Networks). New York: Ieee (in English), 2018, pp. 85-90.

 

[264] D. Lumelskyj, L. Lazarescu, D. Banabic, and J. Rojek, "Comparison of two methods for detection of strain localization in sheet forming," in Proceedings of 21st International Esaform Conference on Material Forming, vol. 1960, L. Fratini, R. DiLorenzo, G. Buffa, and G. Ingarao Eds., (AIP Conference Proceedings. Melville: Amer Inst Physics, 2018.

 

[265] D. Lumelskyj, L. Lazarescu, D. Banabic, and J. Rojek, "Experimental and numerical investigations on determination of strain localization in sheet forming," in Numisheet 2018: 11th International Conference and Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes, vol. 1063, T. Kuwabara, T. Hama, M. Kuroda, S. Takahashi, and A. Yamanaka Eds., (Journal of Physics Conference Series. Bristol: Iop Publishing Ltd, 2018.

 

[266] C. Lung, A. Buchman, S. Sabou, and Ieee, "Smart city emergency situations management system based on sensors network," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 288-291.

 

[267] A. M. Lungana-Niculescu, A. Colesa, and C. Oprisa, "False Positive Mitigation in Behavioral Malware Detection Using Deep Learning," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 197-203.

 

[268] N. Lungu and S. A. Ciplea, "ULAM-HYERS STABILITY OF FREDHOLM-VOLTERRA INTEGRAL EQUATION FROM ECONOMIC THEORY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 32-36.

 

[269] R. Lungu, F. Lungu, and S. Suteu, "MANAGERIAL PRACTICE FACING THE DEMANDS OF RELIGIOUS MORALITY. ARE THE LATTER A LIMITING FACTOR OR A LEADING TO PERFORMANCE ONE?," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 353-362.

 

[270] R. Ma, E. Breaz, Z. L. Li, P. Briois, and F. Gao, "Co-Oxidation Modeling for a Syngas-Supplied Microtubular Solid Oxide Fuel Cell," (in English), Ieee Transactions on Industry Applications, Article; Proceedings Paper vol. 54, no. 5, pp. 4917-4926, Sep-Oct 2018, doi: 10.1109/tia.2018.2845395.

 

[271] R. Ma et al., "Data-driven Prognostics for PEM Fuel Cell Degradation by Long Short-term Memory Network," in 2018 Ieee Transportation and Electrification Conference and Expo, (IEEE Transportation Electrification Conference and Expo. New York: Ieee, 2018, pp. 102-107.

 

[272] A. P. Madaras, "Sacred names in painting," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 901-916.

 

[273] D. Maier, A. Maier, I. Ceausu, E. Gotesman, and A. Bercovici, The Role of Human Resource Management in Developing a Culture of Innovation in an Organization (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 6274-6281.

 

[274] D. Maier, A. Maier, R. Murswieck, and R. Ionescu, The Beginning of Innovation - Simple Methods and Techniques for Evaluating the Innovative Idea (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 6674-6682.

 

[275] D. Maier, I. Surugiu, R. Bumbac, and A. Maier, "MEANS OF ECONOMIC GROWTH THROUGH INNOVATION," in Basiq International Conference: New Trends in Sustainable Business and Consumption 2018, R. Pamfilie, V. Dinu, L. Tachiciu, D. Plesea, and C. Vasiliu Eds., (Proceedings of BASIQ. Bucuresti: Editura Ase, 2018, pp. 793-799.

 

[276] V. Maier, C. Ciorca, S. G. Pavel, H. G. Beleiu, I. Birou, and Ieee, Design of Vertical Earth Grounding With Rectangular Outline by Minimizing Its Total Metal Mass (2018 14th International Conference on Development and Application Systems). New York: Ieee (in English), 2018, pp. 57-62.

 

[277] L. Marchal, H. Nagy, B. Simon, F. Vivien, and Ieee, "Parallel scheduling of DAGs under memory constraints," in 2018 32nd Ieee International Parallel and Distributed Processing Symposium, (International Parallel and Distributed Processing Symposium IPDPS. New York: Ieee, 2018, pp. 204-213.

 

[278] V. Marian, "Names in Christianity. Theological meaning of people's first names, from birth to afterlife," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 234-248.

 

[279] T. F. Marinca, H. F. Chicinas, B. V. Neamtu, F. Popa, N. A. Sechel, and I. Chicinas, "Reactive mechanical milling of Fe-Ni-Fe2O3 mixtures," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 18-27.

 

[280] C. Marius, C. Beniamin, D. Petru, G. Bogdan, and Ieee, "Sufficient Initial Conditions On a Boundary Value Problem For the Spherical Inverted Pendulum," in 2018 Ieee Conference on Decision and Control, (IEEE Conference on Decision and Control. New York: Ieee, 2018, pp. 2005-2010.

 

[281] T. Marius, S. B. I. Monica, P. Mariana, and I. V. Dana-Adriana, "A new technical version of wiping of the steel wire surface after "Hot Dip" zinc coating," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 93-98.

 

[282] K. A. Markowski, I. Birs, C. I. Muresan, and O. Prodan, "Different fractional order models for an experimental smart beam system," (in English), Bulletin of the Polish Academy of Sciences-Technical Sciences, Article; Proceedings Paper vol. 66, no. 4, pp. 485-493, Aug 2018, doi: 10.24425/124265.

 

[283] R. Martis, F. P. Piglesan, C. Martis, L. Szabo, M. Ruba, and Ieee, Design and Optimization Platform for Synchronous Motors (2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee (in English), 2018, pp. 314-318.

 

[284] K. Marton, L. Parvu, and A. Suciu, "The Impact of Post-processing Functions on Random Number Sequences," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[285] L. Marton, L. Tamas, and Ieee, "Wireless Data Rate Controller Design for Networked Control Applications," in 2018 26th Mediterranean Conference on Control and Automation, (Mediterranean Conference on Control and Automation. New York: Ieee, 2018, pp. 448-453.

 

[286] V. V. Merie, A. Molea, V. N. Burnete, B. V. Neamtu, and G. Negrea, "Structural and optical characterization of titanium nitride thin films deposited by magnetron sputtering," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 134-142.

 

[287] V. V. Merie, M. S. Pustan, G. Negrea, and C. Birleanu, "Atomic force microscopy analyses on metallic thin films for optical MEMS," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 125-133.

 

[288] V. Merie, G. Negrea, M. Pustan, B. Neamtu, and S. Craciun, "Effect of deposition time on tribological and adhesion characteristics of niobium nitride thin films," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[289] L. Mic, R. Fat, M. M. Santa, and T. S. Letia, "Hybrid Control Models for Flexible Manufacturing Systems," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[290] A. V. Miclea, R. Terebes, I. Ilea, and M. Borda, "Hyperspectral Image Classification using Combined Spectral-Spatial Denoising and Deep Learning Techniques," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[291] V. C. Miclea, L. Miclea, S. Nedevschi, and Ieee, "Real-time Stereo Reconstruction Failure Detection and Correction using Deep Learning," in 2018 21st International Conference on Intelligent Transportation Systems, (IEEE International Conference on Intelligent Transportation Systems-ITSC. New York: Ieee, 2018, pp. 1095-1102.

 

[292] B. Mihai and D. Gorgan, "Virtual Machine and Data Placement Based on Physical Particle Optimization Model for Running Remote Sensing Scientific Flows," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 377-384.

 

[293] S. R. Mihai, P. Ioan, C. Neagu, and F. Dinu, NUMERICAL STUDIES ON SEISMIC RESPONSE OF STEEL AND COMPOSITE ECCENTRICALLY BRACED FRAMES (Irf2018: Proceedings of the 6th International Conference on Integrity-Reliability-Failure). Porto: Inegi-Inst Engenharia Mecanica E Gestao Industrial (in English), 2018, pp. 583-584.

 

[294] D. Mitrea, S. Nedevschi, and R. Badea, Automatic Recognition of the Hepatocellular Carcinoma from Ultrasound Images using Complex Textural Microstructure Co-Occurrence Matrices (CTMCM) (Proceedings of the 7th International Conference on Pattern Recognition Applications and Methods). Setubal: Scitepress (in English), 2018, pp. 178-189.

 

[295] I. Mocan, R. Ian, A. Ciurte, R. Danescu, and R. Buiga, "Automatic Detection of Tumor Cells in Microscopic Images of Unstained Blood using Convolutional Neural Networks," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 319-324.

 

[296] B. Mociran and R. Oglejan, "Methods of Interconnecting Designing Programs Simulation and Optimization in Engineering," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 475-478.

 

[297] L. Moga and A. Bucur, "Nano insulation materials for application in nZEB," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 309-316.

 

[298] A. M. Mogosanu, M. X. Calbureanu, and L. G. Kopenetz, Long-term behaviour analysis of masonry heritage buildings from Campulung - Arges affectedly by environment agents and major earthquakes for the last centuries (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 323-328.

 

[299] S. Moica, C. Veres, L. Marian, and Ieee, "Effects of Suggestion System on Continuous Improvement: A Case Study," in 2018 Ieee International Conference on Industrial Engineering and Engineering Management, (International Conference on Industrial Engineering and Engineering Management IEEM. New York: Ieee, 2018, pp. 592-596.

 

[300] D. Moldovan, V. Chifu, C. Pop, T. Cioara, I. Anghel, and I. Salomie, "Chicken Swarm Optimization and Deep Learning for Manufacturing Processes," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[301] D. Moldovan et al., "Big Data Analytics for the Daily Living Activities of the People with Dementia," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 175-181.

 

[302] F. Moldovan and C. Oprisa, "A Framework for Threats Analysis Using Software-Defined Networking," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 451-457.

 

[303] D. Monea, R. Prodan, and V. T. Grosu, "CONTINUOUS EDUCATION AND TRAINING OF ADULT SPORTSMEN - STUDY CASE: THE FOOTBALL REFEREES," in Erd 2017 - Education, Reflection, Development, Fifth Edition, vol. 41, V. Chis and I. Albulescu Eds., (European Proceedings of Social and Behavioural Sciences. Nicosia: Future Acad, 2018, pp. 503-507.

 

[304] S. D. Monica, C. Iulia, and K. Zoltan, "Modeling and simulation of a waste water neutralization system using (M-pdx) Method," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[305] S. D. Monica, C. Iulia, and K. Zoltan, "Numerical simulation of a wastewater neutralization system," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[306] I. C. Morarescu, V. S. Varma, L. Busoniu, and S. Lasaulce, "Space-time budget allocation for marketing over social networks," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 16, pp. 211-216, 2018, doi: 10.1016/j.ifacol.2018.08.036.

 

[307] B. A. Morosanu and C. Lemnaru, "From Image Captioning to Video Summary using Deep Recurrent Networks and Unsupervised Segmentation," in Tenth International Conference on Machine Vision, vol. 10696, A. Verikas, P. Radeva, D. Nikolaev, and J. Zhou Eds., (Proceedings of SPIE. Bellingham: Spie-Int Soc Optical Engineering, 2018.

 

[308] C. Munteanu, D. Bogdan, M. L. Mihaela, N. Cobirzan, D. R. Tamas-Gavrea, and F. Babota, "The acoustic properties of the lecture hall of the Faculty of Building Services in Cluj-Napoca," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 331-338.

 

[309] C. Munteanu, M. L. Mihaela, D. R. Tamas-Gavrea, N. Cobirzan, R. Chiuzbaian, and R. Fernea, "Protection to railway traffic noise in the case of a multilevel residential building from the city of Cluj-Napoca," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 339-346.

 

[310] C. I. Muresan, R. De Keyser, I. Birs, D. Copot, and C. Ionescu, "Benchmark Challenge: a robust fractional order control autotuner for the Refrigeration Systems based on Vapor Compression," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 4, pp. 31-36, 2018, doi: 10.1016/j.ifacol.2018.06.021.

 

[311] C. M. Muresan, "STUDIES AND RESEARCH REGARDING THE MARKETING STRATEGY OF AN ONLINE SALES BRAND," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 678-682.

 

[312] C. M. Muresan, D. S. Stefan, V. Cristescu, V. Negulescu, and A. P. Stoian, "FEATURES OF QUALITY MANAGEMENT IN HEALTH CARE, A DIABETES PROFILED MEDICAL INSTITUTION IN ROMANIA: CASE STUDY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 663-668.

 

[313] M. P. Muresan and S. Nedevschi, "Multimodal sparse LIDAR object tracking in clutter," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 215-221.

 

[314] R. Muresan, "Research into the warm compaction of metal powders," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 152-156.

 

[315] V. Muresan, M. Abrudean, M. L. Unguresan, and T. Colosi, "Modeling and Simulation of the Isotopic Exchange for O-18 Isotope Production," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[316] V. Muresan, M. Abrudean, M. L. Unguresan, T. Colosi, and Ieee, Control of the Isotopic Exchange for O-18 Isotope Production (2018 Ieee 12th International Symposium on Applied Computational Intelligence and Informatics). New York: Ieee (in English), 2018, pp. 389-394.

 

[317] V. Muresan et al., "Control of a Separation Column for O-18 Isotope Production," in 2018 22nd International Conference on System Theory, Control and Computing, M. Barbu, R. Solea, and A. Filipescu Eds., (International Conference on System Theory Control and Computing. New York: Ieee, 2018, pp. 182-187.

 

[318] V. Muresan, D. Moga, D. Petreus, M. Abrudean, N. Stroia, and R. Moga, "Fault Detection and Fault Tolerance Mechanism for DC/DC Converters in Microgrids," (in English), Ifac Papersonline, Proceedings Paper vol. 51, no. 28, pp. 666-671, 2018, doi: 10.1016/j.ifacol.2018.11.781.

 

[319] C. R. Nacu, D. Fodorean, C. Husar, M. Grovu, C. Irimia, and Ieee, Towards autonomous EV by using Virtual Reality and Prescan-Simulink simulation environments (2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee (in English), 2018, pp. 401-406.

 

[320] C. Nafornita et al., "Romania Monitoring Station Network to Support EGNOS Services in Eastern Europe," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 153-160.

 

[321] Z. Nagy, R. Ballok, and A. Dezo, FEM investigation of cold-formed joints for multi-storey steel frames (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 329-334.

 

[322] B. W. Najar, "MANAGEMENT AND INSURANCE OF THE THERAPEUTIC SYSTEMS IN SHELTERS FOR THE PREVENTION OF VIOLENCE IN THE STATE OF ISRAEL," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 245-249.

 

[323] C. Nandra, V. Bacu, and D. Gorgan, "Distributed, Workflow-Driven Rendering of 3D Object Scenes on a Big Data Processing Platform," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[324] I. Nascu, "Hierarchical predictive control of Wastewater Treatment Plants," in 22nd International Conference on Circuits, Systems, Communications and Computers, vol. 210, N. Mastorakis, V. Mladenov, and A. Bulucea Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[325] I. Nascu and Ieee, Multilevel predictive control system for an activated sludge wastewater treatment process (2018 5th International Conference on Mathematics and Computers in Sciences and Industry). New York: Ieee (in English), 2018, pp. 14-19.

 

[326] I. Nascu and E. Pistikopoulos, "Hybrid Multiparametric Model Predictive Control with application to the Neuromuscular Blockade," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[327] I. Nasui-Zah, A. Dziechciarz, C. S. Martis, and Ieee, Synchronous Reluctance Machine modeling for accurate performances evaluation (2018 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee (in English), 2018.

 

[328] I. Nasui-Zah, A. M. Nicorici, and C. Martis, "Saturation and cross-saturation in synchronous reluctance machines," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 347-351.

 

[329] P. A. Natalia, R. Gabriel, and P. D. Adrian, The Influence of Human Capital and Social Responsibility on The Competitiveness of the Companies in the it Industry (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 261-270.

 

[330] L. Neamt et al., "Some Considerations about Overvoltages During and After the Disconnection of a Photovoltaic Park," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 239-242.

 

[331] B. V. Neamtu et al., "A comparative study of the Co-based amorphous alloy prepared by mechanical alloying and rapid quenching," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 157-166.

 

[332] R. O. Neme, S. M. Ciornei, M. Ruba, and C. Martis, Real-Time Simulation of Scaled Propulsion Unit for Light Electric Vehicles (12th International Conference Elektro 2018). New York: Ieee (in English), 2018.

 

[333] R. O. Nemes, M. Ruba, S. Ciornei, H. Hedesiu, C. Martis, and C. Husar, "Real-Time Co-simulation of Electric Power Steering System," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 103-106.

 

[334] R. O. Nemes, M. Ruba, C. Martis, and Ieee, Integration of Real-Time Electric Power Steering System Matlab/Simulink Model into National Instruments VeriStand environment (2018 Ieee 18th International Power Electronics and Motion Control Conference). New York: Ieee (in English), 2018, pp. 700-703.

 

[335] C. Nicolicescu, V. H. Nicoara, F. Popa, and T. F. Marinca, "Obtaining of W/Cu nanocomposite powders by high energy ball milling process," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 173-181.

 

[336] C. Nicolicescu, V. H. Nicoara, F. Popa, and T. F. Marinca, "Wear behavior and microhardness of some W/Cu functionally graded materials obtained by spark plasma sintering," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 182-191.

 

[337] A. M. Nicorici, C. Oprea, and C. Martis, "Performance Evaluation of a 7.5 kW Permanent Magnet Assisted Synchronous Reluctance Machine for Light Electric Vehicles," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 129-132.

 

[338] S. C. Nistor, A. S. Darabant, D. Borza, and Ieee, Micro-Expressions Detection Based on Micro-Motions Dense Optical Flows (2018 26th International Conference on Software, Telecommunications and Computer Networks). New York: Ieee (in English), 2018, pp. 320-326.

 

[339] M. Nutu, R. Martis, H. F. Pop, C. Martis, and Ieee, Principal Component Analysis for Computation of the Magnetization Characteristics of Synchronous Reluctance Machine (2018 Aeit International Annual Conference). New York: Ieee (in English), 2018.

 

[340] I. F. Oarga and I. T. Oarga, "OCCUPATIONAL HEALTH AND SAFETY RISK MANAGEMENT," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 340-344.

 

[341] R. Oezden, M. Aclan, and S. Danho, "Experimental accuracy assessment of different measuring sensors on workpieces with varying properties," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[342] G. V. Olariu and S. Brad, "PERFORMANCE ASSESSMENT AND THE ANALYSIS OF ITS INFLUENCING FACTORS IN ROMANIAN UNIVERSITIES BY USING MALMQUIST DEA: A CASE STUDY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 7-13.

 

[343] G. V. Olariu, S. Brad, and M. Fulea, "THE METHODOLOGY OF THE PERFORMANCE MEASUREMENT BASED ON THE ANALYSIS OF PROCESSES IN HIGHER EDUCATION," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 345-352.

 

[344] A. Onaciu and A. N. Marginean, "Ensemble of Artificial Neural Networks for Aspect Based Sentiment Analysis," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 13-19.

 

[345] V. Onet, "Toponyms in Romanian fairy tales - between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1208-1218.

 

[346] R. Onica, V. Bota, and Ieee, "Carrier Frequency-offset Compensation by Inter-carrier Symbol Precoding at the Transmitter in OFDM Transmissions," in 2018 12th International Conference on Communications, (IEEE International Conference on Communications. New York: Ieee, 2018, pp. 165-170.

 

[347] B. Oniga, S. H. Farr, A. Munteanu, and V. Dadarlat, IoT infrastructure secured by TLS level authentication and PKI identity system (Proceedings of the 2018 Second World Conference on Smart Trends in Systems, Security and Sustainability). New York: Ieee (in English), 2018, pp. 78-83.

 

[348] B. Oniga, A. Munteanu, and V. Dadarlat, "Open-source multi-protocol gateway for Internet of Things," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[349] F. Oniga and S. Nedevschi, "A Fast Ransac Based Approach for Computing the Orientation of Obstacles in Traffic Scenes," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 209-214.

 

[350] Y. A. Orban, D. L. Manea, and C. Aciu, "Study of methods for simulating multiphase construction materials," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 256-261.

 

[351] Y. A. Orban, D. L. Manea, C. Aciu, and A. Mustea, "Virtual manufacturing and mechanical properties of synthetic fiber-reinforced mortars," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 262-267.

 

[352] M. N. Ordean and V. T. Grosu, "Effectiveness of Kyphosis Recovery Procedures and Kyphotic Attitudes - Comparison between Kinetotherapy and Ham with Auditiv Feedback," in Proceedings of the 14th International Scientific Conference Elearning and Software for Education: Elearning Challenges and New Horizons, Vol 3, I. Roceanu, D. Beligan, T. Chicioreanu, M. Blaga, M. Stanescu, and C. Corciova Eds., (eLearning and Software for Education. Bucharest: Carol I Natl Defence Univ Publishing House, 2018, pp. 470-474.

 

[353] M. N. Ordean, V. T. Grosu, A. P. Neamtu, P. Stanescu, and M. Traistaru, "PROCEDURES FOR RECOVER CIPHOSIS -COMPARISON BETWEEN NEUROMUSCULAR ELECTROSTIMULATION AND AUDITIVE FEEDBACK," in Erd 2017 - Education, Reflection, Development, Fifth Edition, vol. 41, V. Chis and I. Albulescu Eds., (European Proceedings of Social and Behavioural Sciences. Nicosia: Future Acad, 2018, pp. 692-698.

 

[354] A. Osan, M. Banica, and V. Nasui, "Processing of convex complex surfaces with toroidal milling versus ball nose end mill," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[355] F. E. Osan, "Reconfiguration of sacred time in the world of brands. Advertising discourse - diachronic perspective," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 953-966.

 

[356] C. C. Otel, L. Lazarescu, V. Muresan, D. Badea, and M. Bucur, "INCREASING THE QUALITY OF TECHNICAL HIGHER EDUCATION IN SATU MARE FROM THE PERSPECTIVE OF THE TEACHING STAFF WORKING AT THE TUC-N BRANCH," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 258-263.

 

[357] C. C. Otel, F. Lungu, and I. O. Costin, "RESEARCHES REGARDING THE PERCEPTION OF STUDENTS AND PROFESSORS CONCERNING THE FIELD OF "ENGINEERING"," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 409-416.

 

[358] M. C. Otoiu, "On the meaning of characters' names in the writings of Chretien de Troyes," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1219-1228.

 

[359] R. Pacurar, A. Pacurar, and S. Pop, "Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[360] S. Paduretu and A. G. Popa, "CURRENT ISSUES IN DESIGNING COURSE CONTENT FOR HIGHER EDUCATION AREA USING ENGLISH AS A MEDIUM OF INSTRUCTION IN THE FIELD OF CIVIL ENGINEERING," in 12th International Technology, Education and Development Conference, L. G. Chova, A. L. Martinez, and I. C. Torres Eds., (INTED Proceedings. Valenica: Iated-Int Assoc Technology Education & Development, 2018, pp. 6112-6116.

 

[361] S. Paduretu and A. G. Popa, "DEVELOPING LANGUAGE SKILLS USING ENGLISH AS THE MEDIUM OF INSTRUCTION IN HIGHER EDUCATION AREA IN THE FIELD OF CIVIL ENGINEERING," in 12th International Technology, Education and Development Conference, L. G. Chova, A. L. Martinez, and I. C. Torres Eds., (INTED Proceedings. Valenica: Iated-Int Assoc Technology Education & Development, 2018, pp. 6079-6084.

 

[362] I. A. Pap, S. Oniga, I. Orha, and A. Alexan, "IoT-Based eHealth Data Acquisition System," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[363] A. Pasca, A. Ciupe, S. Meza, B. Orza, and Ieee, "Acquisition Modeling for Optimal Indoor Panoramic Imagery," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 297-300.

 

[364] R. Pasca, "Biblical first names between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 302-316.

 

[365] A. Pastrav, C. Codau, E. Puschita, P. Dolea, T. Palade, and Ieee, "Conceptual Architecture of a Retrodirective Antenna System with Beamforming Capabilities," in 2018 12th International Conference on Communications, (IEEE International Conference on Communications. New York: Ieee, 2018, pp. 225-230.

 

[366] A. Pastrav, P. Dolea, E. Puschita, C. Codau, T. Palade, and Ieee, "Evaluating the Electromagnetic Pollution in the 700-1000MHz Frequency Range in Urban Areas," in 2018 Ieee Conference on Antenna Measurements & Applications, (IEEE Conference on Antenna Measurements & Applications. New York: Ieee, 2018.

 

[367] A. Pastrav et al., "The Alphasat Experiment at Cluj-Napoca - Preliminary Results," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 229-232.

 

[368] T. Patarau, D. Petreus, R. Etz, E. Lazar, and Ieee, Techno-economic feasibility study on an off-grid renewable energy microgrid for an isolated greenhouse in Romania (2018 Ieee 18th International Power Electronics and Motion Control Conference). New York: Ieee (in English), 2018, pp. 445-450.

 

[369] T. Petrican et al., "Evaluating Forecasting Techniques for Integrating Household Energy Prosumers into Smart Grids," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 79-85.

 

[370] D. P. Petrinca and E. N. Todoran, "Immune System Modeling and Analysis using CARMA," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 409-416.

 

[371] C. M. Petruti, B. A. Puiu, I. A. Ivanciu, and V. Dobrota, "Automatic Management Solution in Cloud Using NtopNG and Zabbix," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[372] C. Pica, R. Munteanu, S. Pavel, and H. Beleiu, "Modeling of Photovoltaic Panels," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 769-773.

 

[373] F. P. Piglesan, R. Martis, C. Martis, C. Faria, F. Chauvicourt, and Ieee, Electromagnetic and NVH study for low power Synchronous Reluctance Machine (2018 Aeit International Annual Conference). New York: Ieee (in English), 2018.

 

[374] C. M. Pintea, O. Matei, R. A. Ramadan, M. Pavone, M. Niazi, and A. T. Azar, "A Fuzzy Approach of Sensitivity for Multiple Colonies on Ant Colony Optimization," in Soft Computing Applications, Sofa 2016, Vol 2, vol. 634, V. E. Balas, L. C. Jain, and M. M. Balas Eds., (Advances in Intelligent Systems and Computing. Cham: Springer International Publishing Ag, 2018, pp. 87-95.

 

[375] A. Pisla, C. Vaida, and F. Covaciu, "Test Bench for Space Remote Docking System," in New Trends in Medical and Service Robots: Design, Analysis and Control, vol. 48, M. Husty and M. Hofbaur Eds., (Mechanisms and Machine Science. Cham: Springer International Publishing Ag, 2018, pp. 243-259.

 

[376] M. A. Platon, M. Stef, C. Popa, A. E. Tiuc, and O. Nemes, "Research on Recycling Mixed Wastes Based on Fiberglass and Organic Resins," in Euroinvent Icir 2018, vol. 374, A. V. Sandu, M. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[377] C. S. Plesa, M. Neag, and C. M. Boianceanu, Over-Temperature Protection for a Switched-Capacitor DC-DC Converter with Controlled Charging Current (Cas 2018 Proceedings: 2018 International Semiconductor Conference). New York: Ieee (in English), 2018, pp. 219-222.

 

[378] A. C. Pop, F. P. Piglesan, R. Martis, I. Vintiloiu, C. Martis, and Ieee, "First Insights on the Electromagnetic Design of Axial-Flux Synchronous-Reluctance Maschine," in Iecon 2018 - 44th Annual Conference of the Ieee Industrial Electronics Society, (IEEE Industrial Electronics Society. New York: Ieee, 2018, pp. 5702-5709.

 

[379] A. C. Pop et al., "Optimal Design of SRMs for Comparable Output with PMSMs," in Iecon 2018 - 44th Annual Conference of the Ieee Industrial Electronics Society, (IEEE Industrial Electronics Society. New York: Ieee, 2018, pp. 5716-5722.

 

[380] A. Pop et al., "Fast Switch into a Trustworthy Virtual Machine for Running Security-Sensitive Applications," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[381] C. V. Pop, D. Fodorean, C. Husar, and C. Irimia, Structural numerical and experimental comparison of an in-wheel motor dedicated for electric scooter application (12th International Conference Elektro 2018). New York: Ieee (in English), 2018.

 

[382] C. Pop et al., "Decentralizing the Stock Exchange using Blockchain An Ethereum-based implementation of the Bucharest Stock Exchange," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 459-466.

 

[383] D. T. Pop, C. Dehelean, and L. Miclea, "Communication systems for people with severe hearing loss," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[384] E. Pop, G. Ilcea, and S. Buzdugan, "USE PROPERTIES OF DISTRIBUTIONS TO MODEL THE SYSTEMS WITH SEVERE NONLINEARITIES," in Cbu International Conference Proceedings 2018: Innovations in Science and Education, vol. 6, P. Hajek and O. Vit Eds., (Proceedings of CBU. Prague 1: Cbu Research Inst S R O, 2018, pp. 1150-1157.

 

[385] M. F. Pop, "Desacralisation of artists' names through the adoption of pseudonyms," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 326-331.

 

[386] O. G. Pop, A. C. Abrudan, A. M. Dogeanu, A. G. Pocola, L. F. Tutunaru, and M. C. Balan, "Dynamic thermal modeling of buildings and application to a hospital," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[387] O. G. Pop, C. A. Iuga, L. F. Tutunaru, and M. C. Balan, "Modeling and Experimental Validation of the Thermal Behavior of PCM using DSC Input Data," in 3rd Joint International Conference on Energy Engineering and Smart Materials, vol. 2004, T. Perova Ed., (AIP Conference Proceedings. Melville: Amer Inst Physics, 2018.

 

[388] P. Pop, O. Matei, and C. Pintea, A two-level diploid genetic based algorithm for solving the family traveling salesman problem (Gecco'18: Proceedings of the 2018 Genetic and Evolutionary Computation Conference). New York: Assoc Computing Machinery (in English), 2018, pp. 340-346.

 

[389] R. Pop, A. Drcgan, F. Macicasan, C. Lemnaru, and R. Potolea, "Enhancements on a Transition-based Approach for AMR Parsing using LSTM Networks," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 55-62.

 

[390] S. Pop, V. Bande, G. Alin, and Ieee, "Resistive Sensors Network Analog Multiplexing," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 19-22.

 

[391] F. Popa et al., "Study on the particle size reduction by milling of quartz sand for magnetic separation," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 95-104.

 

[392] L. G. Popa and M. Brumaru, "Optimizing buildings energy performance through photovoltaic panel integration within a mobile shading system," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 765-772.

 

[393] I. A. Popan, N. Balc, A. Popan, and A. Carean, "Experimental study on reverse engineering in case of composite materials cut by water jet cutting," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[394] C. Popescu, L. Grama, C. Rusu, and Ieee, Automatic Text Summarization by Mean-absolute Constrained Convex Optimization (2018 41st International Conference on Telecommunications and Signal Processing). New York: Ieee (in English), 2018, pp. 706-709.

 

[395] D. E. Popescu, M. F. Prada, A. Dodescu, D. J. Hemanth, and C. Bungau, A Secure Confident Cloud Computing Architecture Solution for a Smart Campus (2018 7th International Conference on Computers Communications and Control). New York: Ieee (in English), 2018, pp. 240-245.

 

[396] R. Prodan, E. F. Grosu, and V. T. Grosu, "TENNIS GAME EXERCISES THAT INFLUENCE THE PSYCHOMOTOR DEVELOPMENT OF PRESCHOOL CHILDREN," in Erd 2017 - Education, Reflection, Development, Fifth Edition, vol. 41, V. Chis and I. Albulescu Eds., (European Proceedings of Social and Behavioural Sciences. Nicosia: Future Acad, 2018, pp. 61-68.

 

[397] A. Puscasiu, A. Fanca, H. Valean, and S. Folea, "Traffic control using distributed greenhouse gases measurements," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[398] M. Pustan, C. Birleanu, C. Dudescu, R. Muller, and A. Baracu, Integrated Thermally Actuated MEMS Switch with the Signal Line for the Out-of-Plane Actuation<bold> </bold> (2018 Symposium on Design, Test, Integration & Packaging of Mems and Moems). New York: Ieee (in English), 2018.

 

[399] M. Pustan, C. Birleanu, A. Trif, S. Garabagiu, D. Marconi, and L. Barbu-Tudoran, Effect of the Deposition Conditions on Titanium Oxide Thin Films Properties (Cas 2018 Proceedings: 2018 International Semiconductor Conference). New York: Ieee (in English), 2018, pp. 83-86.

 

[400] D. A. Rachisan, "Medicinal herbs between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 989-1004.

 

[401] D. A. Rachisan and C. T. Morariu, "Names of celebrations between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1005-1015.

 

[402] S. Rada, D. Cuibus, H. Vermesan, M. Rada, and E. Culea, "Structural and electrochemical properties of recycled active electrodes from spent lead acid battery and modified with different manganese dioxide contents," (in English), Electrochimica Acta, Article; Proceedings Paper vol. 268, pp. 332-339, Apr 2018, doi: 10.1016/j.electacta.2018.02.135.

 

[403] D. Radu, A. Cretu, C. Avram, A. Astilean, and B. Parrein, "Video Content Transmission in a Public Safety System Model based on Flying Ad-Hoc Networks," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[404] D. Radu, A. Cretu, B. Parrein, J. Z. Yi, C. Avram, and A. Astilean, "Flying Ad Hoc Network for Emergency Applications Connected to a Fog System," in Advances in Internet, Data & Web Technologies, vol. 17, L. Barolli, F. Xhafa, N. Javaid, E. Spaho, and V. Kolici Eds., (Lecture Notes on Data Engineering and Communications Technologies. Cham: Springer International Publishing Ag, 2018, pp. 675-686.

 

[405] A. T. Radulescu et al., Academic initiative on proposing a program to monitoring the subsidence phenomenon in underground former mining areas in Maramures, Romania, I (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 93-98.

 

[406] C. M. Radulescu, I. L. Pop, A. M. Hordau, R. F. Hahn, and G. M. T. Radulescu, Quality Function Deployment as Tool of Sustainable Strategies. Case of Agritourism in Maramures-Romania (Vision 2020: Sustainable Economic Development and Application of Innovation Management). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 3103-3116.

 

[407] C. Radulescu et al., Academic initiative on proposing a program to monitoring the subsidence phenomenon in underground former mining areas in Maramure, Romania, II (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 99-104.

 

[408] S. A. Ranga, B. S. Kirei, and M. D. Topa, "An Equivalent Circuit for Flying-Adder Frequency Synthesizer and Its VHDL Implementation," in Proceedings of Elmar-2018: 60th International Symposium Elmar-2018, M. Mustra, M. Grgic, B. ZovkoCihlar, and D. Vitas Eds., (ELMAR Proceedings. New York: Ieee, 2018, pp. 187-190.

 

[409] B. Rares et al., "Experimental Evaluation of AoA Algorithms using NI USRP Software Defined Radios," in 2018 17th Roedunet Ieee International Conference: Networking in Education and Research, P. Gasner and E. Cebuc Eds., (RoEduNet International Conference. New York: Ieee, 2018.

 

[410] O. Ratiu, N. Panagiotopoulos, S. Vos, E. Puschita, and Ieee, "Wireless Transmission of Sensor Data over UWB in Spacecraft Payload Networks," in 2018 6th Ieee International Conference on Wireless for Space and Extreme Environments, (International Conference on Wireless for Space and Extreme Environments. New York: Ieee, 2018, pp. 131-136.

 

[411] S. Redeca and A. Groza, "Designing agents for the Stratego game," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 97-104.

 

[412] G. Rigatos, P. Siano, F. Marignetti, I. Gros, and Ieee, "A nonlinear optimal control approach for PM Linear Synchronous Motors," in 2018 Ieee 16th International Conference on Industrial Informatics, (IEEE International Conference on Industrial Informatics INDIN. New York: Ieee, 2018, pp. 453-458.

 

[413] M. Ruba, R. Nemes, F. P. Piglesan, H. Hedesiu, and C. Martis, Complete elecric power steering system real-time model in the loop simulator (12th International Conference Elektro 2018). New York: Ieee (in English), 2018.

 

[414] M. Ruba, F. P. Piglesan, R. Nemes, H. Hedesiu, and C. Martis, "Comparison of electric power steering assistant motor structures using real-time model in the loop analysis," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[415] C. Rusu, J. Astola, and Ieee, "Minimum Length Solution for One-Dimensional Discrete Phase Retrieval Problem," in 2018 26th European Signal Processing Conference, (European Signal Processing Conference. Los Alamitos: Ieee Computer Soc, 2018, pp. 470-474.

 

[416] D. Sabau and M. Dobra, "System identification and control analysis for CNC machines," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[417] D. Sabau and P. Dobra, "State-feedback control algorithms for a CNC machine," in 2018 22nd International Conference on System Theory, Control and Computing, M. Barbu, R. Solea, and A. Filipescu Eds., (International Conference on System Theory Control and Computing. New York: Ieee, 2018, pp. 615-620.

 

[418] A. Sacui, "Methods for learning names used by individuals with Down syndrome," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 358-371.

 

[419] A. Sadeh, S. Gecht, and C. Feniser, "Factors affecting configuration plans in product development," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[420] A. Salomia, A. Ciupe, S. Meza, B. Orza, and G. Trifan, "Assistive AR Technology for Hearing Impairments in Driving Lessons," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[421] I. M. Sas-Boca, D. I. Frunza, D. A. Ilutiu-Varvara, and I. Toma, "The properties of bimetallic multi-layer (C45 and S235JR) and the multi-layer steel made by forging," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 11-17.

 

[422] I. M. Sas-Boca, M. Tintelecan, M. Pop, and D. A. Ilutiu-Varvara, "Severe reduction in section of copper wire using the technology of wire cold cassette roller dies," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 73-78.

 

[423] G. Sebestyen, A. Hangan, Z. Czako, and G. Kovacs, "A Taxonomy and Platform for Anomaly Detection," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[424] E. Semenciuc, A. Pastrav, T. Palade, and E. Puschita, "SDWN for End-to-End QoS Path Selection in a Wireless Network Ecosystem," in Future Access Enablers for Ubiquitous and Intelligent Infrastructures, Fabulous 2017, vol. 241, O. Fratu, N. Militaru, and S. Halunga Eds., (Lecture Notes of the Institute for Computer Sciences Social Informatics and Telecommunications Engineering. New York: Springer, 2018, pp. 134-140.

 

[425] M. Senila and I. Petran, Plastic hinges in steel and composite eccentrically braced frames with long links (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 357-362.

 

[426] F. M. Serdean, V. V. Merie, A. V. Crisan, C. Birleanu, and H. G. Crisan, "The influence of deposition time and testing temperature on mechanical proprieties of niobium nitride thin films," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[427] F. M. Serdean, V. V. Merie, G. Negrea, and H. G. Crisan, "Adhesion analysis for niobium nitride thin films deposited by reactive magnetron sputtering," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 212-218.

 

[428] F. Simonca, M. Susca, and P. Dobra, "Optimization for CNC pathing," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[429] M. M. Siserman, "Names of herbal products: between sacred and profane," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 926-937.

 

[430] M. M. Siserman and S. Siserman, "Names of churches (patron saints) in Maramure," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 938-952.

 

[431] V. Sita, C. Avram, M. Dobra, and A. Astilean, "Delay Time Petri Nets based Decision Model to Decrease the Risk of False Security Alarms," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[432] R. R. Slavescu and L. Szakacs, "Towards Improving Location Identification by Deep Learning on Images," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 345-351.

 

[433] V. F. Soporan, V. Samoila, T. R. Lehene, S. Paduretu, M. D. Crisan, and M. M. Vescan, "Method of Analysis of the Topic of Doctoral Thesis in the Field of Castings Production. Case Study on the Situation in Romania," in Euroinvent Icir 2018, vol. 374, A. V. Sandu, M. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[434] A. Stan and M. Giurgiu, "A COMPARISON BETWEEN TRADITIONAL MACHINE LEARNING APPROACHES AND DEEP NEURAL NETWORKS FOR TEXT PROCESSING IN ROMANIAN," in Proceedings of the 13th International Conference Linguistic Resources and Tools for Processing the Romanian Language, V. Pais, D. Gifu, D. Trandabat, D. Cristea, and D. Tufis Eds., (Linguistic Resources and Tools for Romanian Language Processing. Iasi: Editura Univ Alexandru Ioan Cuza Iasi, 2018, pp. 33-42.

 

[435] I. Stan, D. Toderici, and R. Potolea, "Segment Trees based Traffic Congestion Avoidance in Connected Cars Context," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 137-143.

 

[436] O. Stan and L. Miclea, "Local EHR management based on FHIR," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[437] S. Stefanescu and A. Botezan, "Over Grid Connection of Large Photovoltaic Power Plants in Romania," in 2018 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. Fosalau, C. G. Haba, and B. C. Neagu Eds., (International Conference and Exposition on Electrical and Power Engineering. New York: Ieee, 2018, pp. 1070-1073.

 

[438] T. Stefanut, V. Bacu, C. Nandra, D. Balasz, D. Gorgan, and O. Vaduvescu, "NEARBY Platform: Algorithm for Automated Asteroids Detection in Astronomical Images," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 365-369.

 

[439] E. M. Stetco, O. A. Pop, A. Grama, D. Csipkes, E. Ceuca, and Ieee, "Design and Simulation of a Sixth Order Band-Pass Gm-C Filter," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 201-204.

 

[440] E. M. Stetco, O. A. Pop, A. Grama, D. Csipkes, and Ieee, "Design, Modelling and Simulation of a Fifth Order Low-Pass Gm-C Filter," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[441] C. E. Stoenoiu, "INCREASING PERFORMANCE THROUGHT COST MANAGEMENT," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 238-244.

 

[442] I. Stoian, D. Capatana, O. Ghiran, M. Gordan, and C. Florea, "Fast Alternative to Gradient Computation in the DCT Block Domain for Local Binary Patterns Computation," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[443] I. Stoian, I. Kovacs, S. Ignat, O. Ghiran, G. Oltean, and M. Gordan, "Multisensorial Data Fusion and Correlation for Dams Structural Health Monitoring (Multi Scale, Uncertainty-Sensitive Heterogeneous Data Integration)," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[444] N. Stoicuta, O. Stoicuta, T. Pana, and Ieee, "On-line Electrical Parameters Estimation of an Induction Motor," in 2018 International Conference on Applied and Theoretical Electricity, (International Conference on Applied and Theoretical Electricity. New York: Ieee, 2018.

 

[445] A. R. Stroia, "(De)sacralization of terrorism: aspects of names of diseases in journalistic cliches," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1071-1085.

 

[446] D. Sucala, S. A. Ciplea, and I. N. Sucala, "MANAGEMENT OF HISTORICAL BUILDING REHABILITATION," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 51-62.

 

[447] V. M. Suciu, S. I. Salcu, L. N. Pintilie, P. D. Teodosescu, Z. Mathe, and Ieee, "Theoretical efficiency analysis of a buck-boost converter for wide voltage range operation A PSIM model and simulation approach," in Proceedings of the 2018 10th International Conference on Electronics, Computers and Artificial Intelligence, (International Conference on Electronics Computers and Artificial Intelligence. New York: Ieee, 2018.

 

[448] M. Susca, P. Dobra, C. Festila, and F. Simonca, "General-Purpose Model of a Three-Phase Asynchronous Machine for Simulation," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[449] J. Suto, S. Oniga, and P. P. Sitar, Music Stimuli Recognition from Electroencephalogram Signal with Machine Learning (2018 7th International Conference on Computers Communications and Control). New York: Ieee (in English), 2018, pp. 260-264.

 

[450] L. Szabo, Novel Variable Reluctance Generators Used in Small Wind Turbines The Modular Approach (2018 19th International Carpathian Control Conference). New York: Ieee (in English), 2018, pp. 591-596.

 

[451] L. Szabo, "On the Use of Rotary-Linear Generators in Floating Hybrid Wind and Wave Energy Conversion Systems," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[452] L. Szabo and Ieee, Advancements in Electrical Machines Design Brought by the Modular Construction (2018 X International Conference on Electrical Power Drive Systems). New York: Ieee (in English), 2018.

 

[453] N. C. Szekely, M. Bojan, S. I. Salcu, P. D. Teodosescu, and Ieee, "LED performance analysis under various current waveforms," in Proceedings of the 2018 10th International Conference on Electronics, Computers and Artificial Intelligence, (International Conference on Electronics Computers and Artificial Intelligence. New York: Ieee, 2018.

 

[454] M. Talu, M. Bica, and S. Talu, "3D solid modelling and optimal design of a particular toroidal LPG storage tank," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[455] M. Talu, M. Bica, and S. Talu, "The optimal design of a 3D pentagonal toroid with circular cross-section used in manufacturing of LPG storage tanks," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[456] M. Talu and S. Talu, "3D Geometrical Solutions for Toroidal LPG Fuel Tanks Used in Automotive Industry," in Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm, vol. 151, S. Balakrishnan, S. Talu, F. AbedMeraim, and M. Bhardwaj Eds., (Advances in Intelligent Systems Research. Paris: Atlantis Press, 2018, pp. 189-193.

 

[457] M. Talu, S. Talu, D. Vintila, and L. Grigorie, "Numerical Analysis of the Pressure Drop in Industrial Pipes with Non-Uniform Roughness and Helical Ribs in the Case of Laminar Flow," in Proceedings of the 2018 International Conference on Computer Modeling, Simulation and Algorithm, vol. 151, S. Balakrishnan, S. Talu, F. AbedMeraim, and M. Bhardwaj Eds., (Advances in Intelligent Systems Research. Paris: Atlantis Press, 2018, pp. 194-198.

 

[458] S. Talu, R. Dallaev, D. Sobola, and I. Destech Publicat, "Evaluation of Surface Characteristics of Highly Oriented Pyrolitic Graphite," in 2018 2nd International Conference on Advances in Management Science and Engineering, vol. 292, (DEStech Transactions on Social Science Education and Human Science. Lancaster: Destech Publications, Inc, 2018, pp. 150-154.

 

[459] S. Talu, D. Sobola, N. Papez, R. Dallaev, P. Sedlaak, and I. Destech Publicat, "Efficient Processing of Data Acquired Using Microscopy Techniques," in 2018 2nd International Conference on Advances in Management Science and Engineering, vol. 292, (DEStech Transactions on Social Science Education and Human Science. Lancaster: Destech Publications, Inc, 2018, pp. 202-207.

 

[460] S. Talu, D. Sobola, S. Solaymani, R. Dallaev, J. Brustlova, and I. Destech Publicat, "Scale-depended Choice of Scanning Rate for AFM Measurements," in 2018 International Conference on Communication, Network and Artificial Intelligence, (DEStech Transactions on Computer Science and Engineering. Lancaster: Destech Publications, Inc, 2018, pp. 453-459.

 

[461] I. Tamas, I. Salomie, and M. Antal, "Atomic invariants verification and deadlock detection at compile-time," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 435-441.

 

[462] D. R. Tamas-Gavrea, C. Munteanu, R. Fernea, F. Babota, and L. Muresan, "Study on the acoustic rehabilitation of a church," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 384-391.

 

[463] D. R. Tamas-Gavrea, C. Munteanu, R. Fernea, A. E. Tiuc, I. Hancu, and F. Babota, Acoustic analysis of the Orthodox Church "The descent of the Holy Spirit" from Cluj-Napoca (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L (in English), 2018, pp. 363-368.

 

[464] M. O. Tatar and M. Gyarmati, "Locomotion unit for mobile robots," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[465] M. O. Tatar, B. Petre, and E. Teutan, "Design and Development of the Hybrid Mobile Robots," in 2018 Ieee International Conference on Automation, Quality and Testing, Robotics, L. Miclea and I. Stoian Eds., (IEEE International Conference on Automation Quality and Testing Robotics. New York: Ieee, 2018.

 

[466] I. Tataru, O. Corbu, and I. Bucur, "Mixed Wooden-Concrete Piles: A Solution for Structures Located Near Saltwater Lakes," in Euroinvent Icir 2018, vol. 374, A. V. Sandu, M. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[467] A. Taut, G. Chindris, M. Daraban, M. Taut, and Ieee, "Resonant Power Converters used for Wireless Power Transfer," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[468] M. A. Taut, G. Chindris, D. Pitica, and Ieee, "PID Algorithm used for DC Motor Control," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 365-372.

 

[469] M. A. Taut, G. Chindris, A. C. Taut, D. Pitica, and Ieee, "Model-in-the-Loop for Determining the Speed and Position of a DC Motor," in 2018 41st International Spring Seminar on Electronics Technology, (International Spring Seminar on Electronics Technology ISSE. Cham: Springer International Publishing Ag, 2018.

 

[470] B. Tebrean, S. Crisan, T. E. Crisan, and Ieee, Modeling of a Controlled Drug Delivery Capsule (2018 Ieee International Symposium on Medical Measurements and Applications). New York: Ieee (in English), 2018, pp. 400-405.

 

[471] G. Thalmaier, I. Vida-Simiti, and N. A. Sechel, "Influence of the palladium coating on the hydrogen embrittlement of Ni61Nb33Zr6 amorphous tapes obtained by melt spinning," in Powder Metallurgy and Advanced Materials, vol. 8, T. F. Marinca, B. V. Neamtu, and F. Popa Eds., (Materials Research Proceedings. Millersville: Materials Research Forum Llc, 2018, pp. 89-94.

 

[472] C. Timbus, V. Miclea, and C. Lemnaru, "Semantic segmentation-based traffic sign detection and recognition using deep learning techniques," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 325-331.

 

[473] S. Timoftei, "Industrial robot in fine art: can an industrial robot draw a binary image?," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[474] C. Tiple et al., The Role of Speech-To-Text Systems in Improving Communication in Laryngectomized Patients in Romania (Proceedings of National Ent, Head and Neck Surgery Conference). Bologna: Filodiritto Publisher (in English), 2018, pp. 502-508.

 

[475] L. Todea and R. Demarcsek, "EXPLORING RELIGIOUS REPRESENTATIONS IN PROFESSIONAL COMMUNICATION," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1086-1094.

 

[476] V. B. Tomoiaga, M. S. Popa, S. Sattel, G. Contiu, O. V. Veres, and M. Bozga, "Influence of the cutting edge microgeometry in drilling operation of 42CrMo4 and X5CrNi18-10," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[477] M. Trif, C. Lapusan, C. Rad, O. Hancu, and C. Brisan, "Aspects concerning the modular development of a robotic system used in waste sorting," in 8th International Conference on Advanced Concepts in Mechanical Engineering, vol. 444, I. Doroftei, A. Popescu, and C. Bujoreanu Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[478] M. Tripa et al., "About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[479] E. Tugui, M. Barnaure, and M. Coman, "Earth buildings in Romania. Tradition and perspectives," in 3rd China-Romania Science and Technology Seminar, vol. 399, I. V. Abrudan, T. Shi, S. Lache, Y. Wu, R. Muntean, and G. Oancea Eds., (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[480] A. Tulbure, S. Doaga, C. Farcas, I. Ciocan, and Ieee, "Test Bench Concept for Clutch Drive of Automatic DCT Gearboxes," in 2018 Ieee 24th International Symposium for Design and Technology in Electronic Packaging, (International Symposium for Design and Technology in Electronic Packaging. New York: Ieee, 2018, pp. 331-334.

 

[481] R. C. Turcanu, "When God and the Devil are involved in marketing: Christian vs. pagan, divine vs. devilish in names of basic / semi-luxury foods and remedies (Considerations on naming foods, drinks and remedies in contemporary language use and/or languages for special purposes.)," in Name and Naming: Sacred and Profane in Onomastics, O. Felecan Ed., (International Conference on Onomastics Name and Naming. Cluj-Napoca: Editura Mega, 2018, pp. 1095-1126.

 

[482] C. I. Ucenic, "DEFINING THE VOICE OF CUSTOMER THROUGH GEMBA," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 478-481.

 

[483] C. I. Ucenic, "QUALITY FUNCTION DEPLOYMENT FOR A ROMANIAN COMPANY," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 609-613.

 

[484] C. Vaida, I. Birlescu, N. Plitea, N. Crisan, and D. Pisla, "Design of a Needle Insertion Module for Robotic Assisted Transperineal Prostate Biopsy," in New Trends in Medical and Service Robots: Design, Analysis and Control, vol. 48, M. Husty and M. Hofbaur Eds., (Mechanisms and Machine Science. Cham: Springer International Publishing Ag, 2018, pp. 1-15.

 

[485] F. I. Vancea and S. Nedevschi, "Semantic information based vehicle relative orientation and taillight detection," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 259-264.

 

[486] G. Varga, S. Ravai-Nagy, F. Szigeti, and Iop, "Examination of surface roughness of holes of plastic parts drilled under cryogenic cooling conditions," in Xxiii International Conference on Manufacturing, vol. 448, (IOP Conference Series-Materials Science and Engineering. Bristol: Iop Publishing Ltd, 2018.

 

[487] V. C. Vasile et al., "EGNOS Performance Improvements Using Monitoring Stations in Romania," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 307-312.

 

[488] V. C. Vasile, C. Nafornita, M. Borda, and Ieee, "Comparative Study of Satellite Navigation Systems," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 318-323.

 

[489] M. A. Vasiu, L. M. Marghescu, I. Barbantan, and R. Potolea, "Cross Documents Concept Augmentation," in 2018 Ieee 14th International Conference on Intelligent Computer Communication and Processing, R. R. Slavescu Ed., (IEEE International Conference on Intelligent Computer Communication and Processing ICCP. New York: Ieee, 2018, pp. 29-36.

 

[490] L. Vegh and Ieee, "Cyber-Physical Systems Security through Multi-Factor Authentication and Data Analytics," in 2018 Ieee International Conference on Industrial Technology, (IEEE International Conference on Industrial Technology. New York: Ieee, 2018, pp. 1369-1374.

 

[491] C. L. Vele, Transformational Leadership and Employee Creativity: A Case Study of Romanian Companies (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 5695-5703.

 

[492] C. L. Vele, R. Toader, D. Ighian, G. Boca, and C. Toader, A Model for Analysis of Employees' Creativity (Innovation Management and Education Excellence through Vision 2020, Vols I -Xi). Norristown: Int Business Information Management Assoc-Ibima (in English), 2018, pp. 3224-3232.

 

[493] C. Veres, L. O. Marian, S. Moica, K. Al-Akel, and D. Hosu, "INDUSTRY 4.0 IMPLEMENTATION MODEL: TAKING STEPS TOWARDS DIGITIZATION," in Performance Management or Management Performance?, I. Abrudan Ed., (Review of Management and Economic Engineering International Management Conference. Cluj-Napoca: Todesco Publishing House, 2018, pp. 503-510.

 

[494] C. Veres, L. Marian, S. Moica, and K. Al-Akel, "Case study concerning 5S method impact in an automotive company," in 11th International Conference Interdisciplinarity in Engineering, Inter-Eng 2017, vol. 22, L. Moldovan and A. Gligor Eds., (Procedia Manufacturing. Amsterdam: Elsevier Science Bv, 2018, pp. 900-905.

 

[495] I. D. Voina, S. Sattel, G. Contiu, A. Faur, and B. Luca, "Reamers cutting edge preparation for improvement the GGG 40 machining," in 22nd International Conference on Innovative Manufacturing Engineering and Energy - Imane&E 2018, vol. 178, L. Slatineanu et al. Eds., (MATEC Web of Conferences. Cedex A: E D P Sciences, 2018.

 

[496] M. V. Zaharia, F. Gillon, M. M. Radulescu, and R. Khlissa, "Fast determination of the optimal control parameters of a switched reluctance machine using space mapping technique," (in English), International Journal of Applied Electromagnetics and Mechanics, Article; Proceedings Paper vol. 56, pp. S83-S96, 2018, doi: 10.3233/jae-172281.

 

[497] D. M. Zhou, F. Gao, A. Al-Durra, E. Breaz, A. Ravey, and A. Miraoui, "Development of a Multiphysical 2-D Model of a PEM Fuel Cell for Real-Time Control," (in English), Ieee Transactions on Industry Applications, Article; Proceedings Paper vol. 54, no. 5, pp. 4864-4874, Sep-Oct 2018, doi: 10.1109/tia.2018.2839082.

 

[498] D. Zinca and Ieee, "Experiments with Protocols and Frameworks used in IoT," in 2018 12th International Conference on Communications, (IEEE International Conference on Communications. New York: Ieee, 2018, pp. 277-280.

 

[499] D. Zinca, V. A. Negrean, and Ieee, "Development of a Road Tax Payment Application using the Ethereum Platform," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 211-214.

 

[500] D. Zinca, M. O. Popa, and Ieee, "Development of a ZettaJS driver for the ESP8266 IoT hardware," in 2018 13th International Symposium on Electronics and Telecommunications, (International Symposium on Electronics and Telecommunications. New York: Ieee, 2018, pp. 217-220.