ISI Proceedings 2017

[1]    M. Abdullah et al., "Performance and Characterization of Geopolymer Concrete Reinforced with Short Steel Fiber," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[2]    S. Alboaie, L. Alboaie, I. Bogdan, M. F. Vaida, and Ieee, "Operations On Encrypted Data In An ORM Made For Encrypted Choreographies," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[3]    I. M. Alexandrescu, R. Cotetiu, and D. Daraba, "Correlations of the instantaneous carrying force and pressure distribution in the case of the narrow sliding radial bearing under hard shocks," in 13th International Conference on Tribology, vol. 174, M. Ripa, R. G. Ripeanu, and T. Cicone, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[4]    C. Andronache, D. Racolta, and G. Ardelean, "Magnetic Properties of x(Fe2O3)center dot(100-x) P2O5 center dot Li2O and x( Fe2O3)center dot(100-x) P2O5 center dot Ca0 Glass Systems," in Tim17 Physics Conference, vol. 1916, D. Vizman and A. Popescu, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[5]    M. Antal, A. Burnete, C. Pop, T. Cioara, I. Anghel, and I. Salomie, "Self-Adaptive Task Scheduler for Dynamic Allocation in Energy Efficient Data Centers," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 535-541.

[6]    M. Antal, C. Pop, T. Cioara, I. Anghel, I. Tamas, and I. Salomie, "Proactive Day-Ahead Data Center Operation Scheduling for Energy Efficiency Solving a MIOCP using a Multi-Gene Genetic Algorithm," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 527-534.

[7]    R. Arsinte, T. Sumalan, E. Lupu, and Ieee, On the Use of Virtual Instrumentation Concepts in the Test of Embedded Signal Processing Applications (2017 International Symposium on Signals, Circuits and Systems). New York: Ieee, 2017.

[8]    I. Aschilean, G. Badea, I. Giurca, G. S. Naghiu, and F. G. Iloaie, "Choosing the optimal technology to rehabilitate the pipes in water distribution systems using the AHP method," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 19-26.

[9]    I. Aschilean, G. Badea, I. Giurca, G. S. Naghiu, and F. G. Iloaie, "Determining priorities concerning water distribution network rehabilitation," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 27-34.

[10]    C. Avram, S. Folea, D. Radu, and A. Astilean, WIRELESS RADIATION MONITORING SYSTEM (Proceedings - 31st European Conference on Modelling and Simulation Ecms 2017). Nottingham: European Council Modelling & Simulation, 2017, pp. 416-422.

[11]    F. Babota, R. Iernutan, L. M. Moga, C. Munteanu, and F. L. Tamas, Determining the Optimal Dimensions of Fixed Shadowing Systems in View of Diminishing the Energy Consumption of the Buildings in Romania (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 117-122.

[12]    C. Babut, N. Ungureanu, and M. Ungureanu, "Research on fire hose couplings damages," in International Conference on Applied Sciences, vol. 163, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[13]    V. Bacu, C. Nandra, T. Stefanut, and D. Gorgan, "SWAT model calibration over Cloud infrastructures using the BigEarth platform," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 453-460.

[14]    G. Badea, G. S. Naghiu, I. Giurca, I. Aschilean, and E. Megyesi, "Hydrogen production using solar energy - technical analysis," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 418-425.

[15]    D. Baldean, N. V. Burnete, D. Moldovanu, F. Gaspar, A. I. Borzan, and M. A. Crisan, Experimental Research Regarding the Possibility of Biofuel Fumigation Supply Method on a Single Cylinder Compression Ignited Engine (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 264-273.

[16]    D. Baldean, M. A. Crisan, and A. I. Borzan, Contributions in Experimental Research Concerning Diesel Fuel Supply and Lubrication in the Case of Comparative Study Between Euro V and IV Common Rail Engines (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 253-263.

[17]    I. Barabas, A. Todorut, and N. Cordos, Estimation of Boiling Points of Brake Fluids (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer International Publishing Ag, 2017, pp. 209-216.

[18]    I. Barabas, A. Todorut, N. Cordos, A. Molea, and Iop, "Current challenges in autonomous driving," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[19]    N. Barkoczi and G. Lobontiu, "Theoretical aspects of the acceptance of new technologies on the smartphone market," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[20]    C. Barz, T. Latinovic, S. Deaconu, D. Preradovic, P. P. Pop, and A. Pop-Vadean, "Using Moeller PLC in automation of an artesian fountains," in International Conference on Applied Sciences, vol. 163, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[21]    M. Belmeguenai et al., "Characterization of the Interfacial Dzyaloshinskii-Moriya Interaction in Pt/Co2FeAl0.5Si0.5 Ultrathin Films by Brillouin Light Scattering," Ieee Transactions on Magnetics, vol. 53, no. 11, p. 5, Nov 2017, Art. no. 1000405.

[22]    A. D. Berdie, M. Osaci, I. Muscalagiu, and C. Barz, "A combined approach of AHP and TOPSIS methods applied in the field of integrated software systems," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[23]    A. Beres, Semantic Cyber-physical Cloud Systems (2017 5th International Symposium on Digital Forensic and Security). New York: Ieee, 2017.

[24]    T. Besoiu, A. Popa, and Iop, "Infill Walls Contribution on the Progressive Collapse Resistance of a Typical Mid-rise RC Framed Building," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - Wmcaus, vol. 245(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[25]    C. Birleanu, M. Pustan, C. Dudescu, V. Merie, and I. Pintea, "Analysis of the bending stiffness and adhesion effect in RF-MEMS structures," in 13th International Conference on Tribology, vol. 174, M. Ripa, R. G. Ripeanu, and T. Cicone, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[26]    I. R. Birs, S. Folea, D. Copot, O. Prodan, C. I. Muresan, and Iop, "Comparative analysis and exprimental results of advanced control strategies for vibration suppression in aircraft wings," in 13th European Workshop on Advanced Control and Diagnosis, vol. 783(Journal of Physics Conference Series, Bristol: Iop Publishing Ltd, 2017.

[27]    I. Birs, S. Folea, F. Ionescu, O. Prodan, and C. Muresan, "Preliminary results and simulation of an active pendulum system for a three floor building," in X International Conference on Structural Dynamics, vol. 199, F. Vestroni, F. Romeo, and V. Gattulli, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 1647-1652.

[28]    B. C. Z. Blaga and S. Nedevschi, "Online Cross-Calibration of Camera and LIDAR," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 295-301.

[29]    R. E. Bohiltea et al., Clinical Implementation of Ultrasound Gynecological Examination Report (software REGU) Based on International Consensuses of Tumor Study Groups (5th Romanian Congress of the Romanian Society of Ultrasound in Obstetrics and Gynecology). Bologna: Filodiritto Publisher, 2017, pp. 99-104.

[30]    A. C. Bojan, A. G. Popa, and A. Puskas, "Alternative Solution for Thermal Rehabilitation of Buildings with Polystyrene Panels," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 712-717.

[31]    D. Borza, R. Itu, and R. Danescu, "Real-Time Micro-Expression Detection From High Speed Cameras," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 357-361.

[32]    V. M. Brezoczki and G. M. Filip, "The heavy metal ions (Cu2+, Zn2+, Cd+) toxic compounds influence on triticale plants growth," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[33]    I. Bud, S. Duma, D. Gusat, I. Pasca, and A. Bud, "Critical study of current situation of Vranicioara tailing pond on Cavnicului Valley, risks and consequences," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[34]    E. R. Buhus, L. Grama, and C. Serbu, "A Facial Recognition Application Based on Incremental Supervised Learning," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 279-286.

[35]    N. V. Burnete, N. Burnete, B. Jurchis, C. Iclodean, and Iop, "Influences of diesel pilot injection on ethanol autoignition - a numerical analysis," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[36]    N. V. Burnete, C. Iclodean, D. Moldovanu, and N. Filip, Direct Injection of Diesel and Ethanol in a Diesel Engine - A Numerical Analysis (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 379-386.

[37]    N. V. Burnete, C. Iclodean, G. Popescu, and N. Filip, The Effects of a Diesel-Ethanol Blend Without Additives on Diesel Engine Operation (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 387-394.

[38]    M. I. Buzdugan, H. Balan, and Ieee, Power System Harmonics Issues in Some End User Facilities (2017 52nd International Universities Power Engineering Conference). New York: Ieee, 2017.

[39]    R. D. Cadar, R. M. Boitor, and M. Petrelli, "Urban Mobility and Road User Behavior Assessment," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 116-122.

[40]    G. Calatan, A. Hegyi, C. Dico, and C. Mircea, "Experimental Research on the Recyclability of the Clay Material used in the Fabrication of Adobe Bricks Type Masonry Units," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 363-369.

[41]    I. A. Chereches, A. I. Borzan, D. L. Baldean, and Iop, "Contribution of developing advanced engineering methods in interdisciplinary studying the piston rings from 1.6 spark ignited Ford engine at Technical University of Cluj-Napoca," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[42]    E. S. Chifu, V. R. Chifu, I. Popa, and I. Salomie, "A System for Detecting Professional Skills from Resumes Written in Natural Language," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 189-196.

[43]    V. R. Chifu, E. St Chifu, C. B. Pop, I. Salomie, and A. Niculici, "Optimizing the Generation of Personalized Healthy Menus for Elderly People Using a Crab Breeding Inspired Method," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 155-162.

[44]    V. F. Chiorean and Iop, "Determination of Matric Suction and Saturation Degree for Unsaturated Soils, Comparative Study - Numerical Method versus Analytical Method," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - Wmcaus, vol. 245(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[45]    O. Chiver et al., "Single-phase PM synchronous motor simulation with Matlab/Simulink," in International Conference on Applied Sciences, vol. 163, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[46]    S. Cimpian, A. Lazar, F. Macicasan, and C. Lemnaru, "A Transition-based Approach for AMR Parsing using LSTM Networks," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 103-110.

[47]    T. Cioara et al., Adaptive Workspace Interface for Facilitating the Knowledge Transfer from Retired Elders to Start-up Companies (Ambient Assisted Living and Enhanced Living Environments: Principles, Technologies and Control). Oxford: Butterworth-Heinemann, 2017, pp. 287-309.

[48]    G. Ciobanu and E. N. Todoran, "Continuation Passing Semantics for Membrane Systems," in Membrane Computing, vol. 10105, A. Leporati, G. Rozenberg, A. Salomaa, and C. Zandron, Eds. (Lecture Notes in Computer Science, Cham: Springer International Publishing Ag, 2017, pp. 165-176.

[49]    N. Ciont, M. Iliescu, and R. D. Cadar, "Employing a Traffic Data Processing Software to Efficiently Design Road Pavements," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 868-875.

[50]    M. Ciotlaus, G. Kollo, D. Moldovan, and L. Muntean, "Slope Stability of Railway Embankments," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 52-59.

[51]    M. Ciotlaus, D. Moldovan, A. Clitan, and L. Muntean, "Choosing an Environmentally-Friendly Public Transportation System Using Multiple-Criteria Analysis. Case Study: Bistrita Nasaud, Romania," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 396-403.

[52]    A. P. Circu, A. C. Nagy, D. V. Moldovan, V. C. Ciubotaru, and L. E. Muntean, Flexural Tensile Strength Testing of Stabilized Soil Samples (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 143-146.

[53]    A. F. Clitan, M. L. Dragomir, C. Madalina, I. M. Beca, and G. Hoda, "Improving Traffic Conditions on a Set of Three Intersections Using Microscopic Simulation Models," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 139-145.

[54]    I. Clitan, V. Muresan, M. Abrudean, A. Clitan, and R. Miron, "Position control of an industrial robot using fractional order controller," in 2016 International Conference on Robotics and Machine Vision, vol. 10253, A. V. Bernstein, A. Olaru, and J. Zhou, Eds. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2017.

[55]    C. Codau et al., "Experimental Evaluation of the IEEE 802.11ac Standard Using NI USRP 2954R," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[56]    N. Cohirzan, M. Voinea, L. Kopenetz, C. Munteanu, A. A. Balog, and F. Tamas, "Assessment of Cost and Embodied Carbon for Masonry Structures Located in Low and High Seismic Zones," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 418-424.

[57]    L. M. Conecici, C. Munteanu, and I. M. Purcar, "Study of the shielding performances of different materials regarding Electromagnetic Field Interference," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[58]    D. Copandean, O. Vaduvescu, and D. Gorgan, "Automated Prototype for Asteroids Detection," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 377-382.

[59]    D. Copot, C. Muresan, R. De Keyser, and C. Ionescu, "Patient specific model based induction of hypnosis using fractional order control," Ifac Papersonline, vol. 50, no. 1, pp. 15097-15102, 2017.

[60]    N. Cordos, A. Todorut, I. Barabas, and Iop, "Evaluation of the tire pressure influence on the lateral forces that occur between tire and road," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[61]    N. Cordos, A. Todorut, I. Barabas, and R. D. Muresan, Evaluation of the Behavior in Cornering for Different Classes of Passenger Cars by Numerical Modeling (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 83-89.

[62]    S. Cosman, C. Martis, R. Martis, and Ieee, Coupled Electric - Thermal Model for SR-Drives (2017 15th International Conference on Electrical Machines, Drives and Power Systems). New York: Ieee, 2017, pp. 370-373.

[63]    A. D. Costea, S. Nedevschi, and Ieee, "Traffic Scene Segmentation based on Boosting over Multimodal Low, Intermediate and High Order Multi-range Channel Features," in 2017 28th Ieee Intelligent Vehicles Symposium(IEEE Intelligent Vehicles Symposium, New York: Ieee, 2017, pp. 74-81.

[64]    A. D. Costea, R. Varga, S. Nedevschi, and Ieee, "Fast Boosting based Detection using Scale Invariant Multimodal Multiresolution Filtered Features," in 30th Ieee Conference on Computer Vision and Pattern Recognition(IEEE Conference on Computer Vision and Pattern Recognition, New York: Ieee, 2017, pp. 993-1002.

[65]    O. Cozar, N. Cioica, C. Cota, E. M. Nagy, and R. Fechete, "Plasticizers Effect on Native Biodegradable Package Materials," in Tim15-16 Physics Conference, vol. 1796, D. Vizman and A. Popescu, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[66]    C. Craciun and I. Salomie, "Bayesian Analysis of Resource Allocation Policies in Data Centers in Terms of Virtual Machine Migrations," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 511-518.

[67]    I. Craciun, M. Ungureanu, and D. Stoicovici, "An analysis of the oscillatory movements of the suspension ropes for an elevator with parabolic speed modeling and continuous deceleration," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[68]    S. Crisan, "A Novel Perspective on Hand Vein Patterns for Biometric Recognition: Problems, Challenges, and Implementations," in Biometric Security and Privacy: Opportunities & Challenges in the Big Data Era, R. Jiang, S. AlMaadeed, A. Bouridane, D. Crookes, and A. Beghdadi, Eds. (Signal Processing for Security Technologies, Cham: Springer International Publishing Ag, 2017, pp. 21-49.

[69]    C. Cristea and M. Cristea, "A multi-criteria decision making approach for supplier selection in the flexible packaging industry," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[70]    C. Cristea and M. Cristea, "A multi-criteria decision making approach for the selection of a flexible packaging equipment," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[71]    C. Croitoru, F. Bode, I. Nastase, M. Sandu, A. Vasilescu, and L. Tacutu, "General ventilation system optimization study for environment improvement of sludge dewatering area from a wastewater treatment plant," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 640-649.

[72]    C. Dan and R. Morar, "Determining insulation condition of 110kV instrument transformers. Linking PD measurement results from both gas chromatography and electrical method," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[73]    C. Dan and R. Morar, "Partial discharge measurements on 110kV current transformers. Setting the control value. Case study," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[74]    P. Danca, F. Bode, I. Nastase, and A. Meslem, "On the possibility of CFD modeling of the indoor environment in a vehicle," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 656-663.

[75]    D. Daraba, I. M. Alexandrescu, and C. Daraba, "Research on the injectors remanufacturing," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[76]    L. Darabant, D. Stet, M. Cretu, G. Cosovici, and Ieee, "ORCAD Implementation of a Frequency Response Function using Equivalent Circuits," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 103-106.

[77]    R. Darmon and M. Suciu, Smoke Control Design in Large Spaces (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 153-158.

[78]    Z. Diaconeasa et al., "New insights regarding the selectivity and the uptake potential of nanoceria by human cells," Colloids and Surfaces a-Physicochemical and Engineering Aspects, vol. 532, pp. 132-139, Nov 2017.

[79]    F. Dragan, V. V. Lupu, A. Pallag, C. Barz, and K. Fodor, "Rational consumption of nutrients at school-aged children," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[80]    L. Dragan, "Some considerations about the use of different sensors, in coordinate measuring of the small parts," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[81]    M. A. Dranca, M. V. Zaharia, M. M. Radulescu, and Ieee, "Modelling and Transient Analysis of a Three-Phase Low-Speed Switched Reluctance Micro-Wind Generator," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 196-200.

[82]    M. Dranca, M. Chirca, V. Zaharia, A. Zaharia, S. Breban, and Ieee, Permanent Magnet Generator for Counter-Rotating Vertical Axis Micro-Wind Turbine (2017 52nd International Universities Power Engineering Conference). New York: Ieee, 2017.

[83]    L. I. Dulau, D. Bica, K. Ronay, and Ieee, "Impact of Photovoltaic Power Plants on Power System Losses," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 727-730.

[84]    M. Dulau, A. Gligor, and T. M. Dulau, "Fractional Order Controllers versus Integer Order Controllers," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 538-545.

[85]    S. Emerich, R. Malutan, S. Crisan, and L. Lefkovits, "Iris Indexing Based on Local Intensity Order Pattern," in Ninth International Conference on Machine Vision, vol. 10341, A. Verikas, P. Radeva, D. P. Nikolaev, W. Zhang, and J. Zhou, Eds. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2017.

[86]    S. Epple, R. Jung, K. Jalba, and V. Nasui, "Real time capable control design with increased life expectancy for research purposes," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[87]    S. Epple, R. Jung, K. Jalba, and V. Nasui, "Software architecture for a multi-purpose real-time control unit for research purposes," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[88]    Z. Erdei, M. Horgos, C. Lung, A. Pop-Vadean, and R. Muresan, "Frequency behavior of the residual current devices," in International Conference on Applied Sciences, vol. 163, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[89]    Z. Erdei, M. Horgos, and O. Zetea, "Simulation of defects on contactor coil," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[90]    A. Falaus, "The current challenges of teaching ESP," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[91]    B. P. Fazakas, O. C. Iuonas, C. Porumb, B. Iancu, and Ieee, "Collaborative Learning Tools For Formal And Informal Engineering Education," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[92]    R. Fernea, D. R. Tamas-Gavrea, D. L. Manea, J. C. Rosca, C. Aciu, and C. Munteanu, "Multicriterial Analysis of Several Acoustic Absorption Building Materials Based on Hemp," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 1005-1012.

[93]    G. Ferrari and L. Boca, "METAPHORS IN FOREIGN LANGUAGE TEACHING: ENGLISH AND ROMANIAN BUSINESS METAPHORS," in Edu World 7th International Conference, vol. 23, E. Soare and C. Langa, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2017, pp. 986-991.

[94]    G. M. Filip and V. M. Brezoczki, "Particulate matter urban air pollution from traffic car," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[95]    N. Filip and C. Golgot, Traffic Optimization in Urban Area - Roundabout Versus Lights Case Studies (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 694-701.

[96]    D. Fodorean and Ieee, Study of electric propulsion by using virtual reality software (2017 52nd International Universities Power Engineering Conference). New York: Ieee, 2017.

[97]    D. Fratila and H. Rotaru, "Additive manufacturing - a sustainable manufacturing route," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[98]    S. Gaga and S. Nedevschi, "An approach for segmenting 3D LiDAR data using Multi-Volume grid structures," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 309-315.

[99]    R. Galatus, B. Feier, C. Cristea, N. Cennamo, and L. Zeni, "SPR Based Hybrid Electro-Optic Biosensor for beta-Lactam Antibiotics Determination in Water," in Remote Sensing and Modeling of Ecosystems for Sustainability Xiv, vol. 10405, W. Gao, N. B. Chang, and J. Wang, Eds. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2017.

[100]    I. Ganea, "Influence of the solid dielectric over the electric field from the ozone cell gap with double dielectric barrier," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[101]    I. Ganea and R. Morar, "Factors that increase the electric field of the dielectric barrier ozone generators," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[102]    M. Georgescu, V. Ungureanu, D. Grecea, I. Petran, and Iop, "Conversion of a Temporary Tent with Steel Frame into a Permanent Warehouse," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - Wmcaus, vol. 245(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[103]    C. M. Gheorghe, C. M. Iurian, E. F. Luchian, I. A. Ivanciu, V. Dobrota, and Ieee, "Applications of the Cisco APIC-EM Software-Defined Networking Controller for a Virtualized Testbed," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[104]    F. Girbacia, R. Boboc, B. Gherman, T. Girbacia, and D. Pisla, "Planning of Needle Insertion for Robotic-Assisted Prostate Biopsy in Augmented Reality Using RGB-D Camera," in Advances in Robot Design and Intelligent Control, vol. 540, A. Rodic and T. Borangiu, Eds. (Advances in Intelligent Systems and Computing, Cham: Springer International Publishing Ag, 2017, pp. 515-522.

[105]    F. Girbacia, D. Pisla, S. Butnariu, B. Gherman, T. Girbacia, and N. Plitea, "An Evolutionary Computational Algorithm for Trajectory Planning of an Innovative Parallel Robot for Brachytherapy," in New Advances in Mechanisms, Mechanical Transmissions and Robotics, vol. 46, B. Corves, E. C. Lovasz, M. Husing, I. Maniu, and C. Gruescu, Eds. (Mechanisms and Machine Science, Cham: Springer Int Publishing Ag, 2017, pp. 427-435.

[106]    I. Giurca, G. Badea, I. Aschilean, G. S. Naghiu, and E. Megyesi, "Selecting the number and size of boilers used within the heating units of the residential complexes," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 134-141.

[107]    A. Gligor, C. D. Dumitru, K. Ronay, and R. Muntean, "Microcontroller Based Prototype for Reactive Power Compensation in Local Distribution Networks," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 746-753.

[108]    L. Grama, E. R. Buhus, C. Rusu, and Ieee, Acoustic Classification using Linear Predictive Coding for Wildlife Detection Systems (2017 International Symposium on Signals, Circuits and Systems). New York: Ieee, 2017.

[109]    G. Hajmasan, A. Mondoc, and O. Cret, Dynamic Behavior Evaluation for Malware Detection (2017 5th International Symposium on Digital Forensic and Security). New York: Ieee, 2017.

[110]    O. L. Hasna and R. Potolea, "Time series - a taxonomy based survey," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 231-238.

[111]    A. Hegyi, C. Dico, H. Constantinescu, and C. Baera, "Influence of Hot-Dip Galvanizing of Reinforcement on the Kinetics and Thermodynamics of Corrosion Process in Concrete," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 226-233.

[112]    V. Hodor, D. Birle, L. Nascutiu, and I. Deac, "Aeroacoustics - Noise prediction by using "LES" for signal processing," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 322-329.

[113]    V. Hotea, J. Juhasz, and F. Cadar, "Grain refinement of 7075Al alloy microstructures by inoculation with Al-Ti-B master alloy," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[114]    C. Iclodean, B. Varga, N. Burnete, D. Cimerdean, B. Jurchi, and Iop, "Comparison of Different Battery Types for Electric Vehicles," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[115]    N. M. Ilies, A. P. Circu, A. C. Nagy, V. C. Ciubotaru, and Z. Kisfaludi-Bak, "Comparative Study on Soil Stabilization with Polyethylene Waste Materials and Binders," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 444-451.

[116]    M. Iliescu and R. Ciocan, "Modern Technologies Innovation In Use For Quality Control On Construction Site," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 999-1004.

[117]    M. Iliescu, S. I. Gutiu, and C. Moga, "Technological Problems regarding the Design and Execution of the new Bridge over Cibin River in the City of Sibiu and the Bridge Impact in Reducing Pollution in the City Center Area," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 20-27.

[118]    D. A. Ilutiu-Varvara, C. Aciu, E. M. Pica, and C. Sava, "Research on the Chemical Characterization of the Oily Mill Scale for Natural Resources Conservation," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 439-443.

[119]    D. A. Ilutiu-Varvara, C. M. Marza, F. V. Domnita, I. M. Sas-Boca, and M. Tintelecan, "An Assessment of the Metallic Iron Content from Metallurgical Wastes - Essential Factor for Sustainable Development in the Steelmaking Industry," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 357-362.

[120]    R. A. Inte, F. N. Jurca, and Ieee, Torque ripple reduction of outer rotor synchronous reluctance machine with concentrated winding (2017 19th International Conference on Electrical Drives and Power Electronics). New York: Ieee, 2017, pp. 248-252.

[121]    R. Itu, D. Borza, and R. Danescu, "Automatic extrinsic camera parameters calibration using Convolutional Neural Networks," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 273-278.

[122]    C. K. Jalba, A. Muminovic, C. Barz, and V. Nasui, "Automated assembling of single fuel cell units for use in a fuel cell stack," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[123]    C. K. Jalba, A. Muminovic, S. Epple, C. Barz, and V. Nasui, "Integration of disabled people in an automated work process," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[124]    C. K. Jalba, A. Muminovic, S. Epple, C. Barz, and V. Nasui, "Optical Gripper," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[125]    G. Jasko, I. Giosan, and S. Nedevschi, "Animal Detection from Traffic Scenarios Based on Monocular Color Vision," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 363-368.

[126]    M. Joldos and C. Chira, "A Parallel Evolutionary Approach to Community Detection in Complex Networks," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 247-254.

[127]    E. Jumate, D. L. Manea, D. Moldovan, and R. Fechete, "The Effects of Hydrophobic Redispersibele Powder Polymer in Portland Cement Based Mortars," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 316-323.

[128]    F. N. Jurca, C. Martis, and Ieee, Analysis of Outer Rotor Synchronous Reluctance Motor for Low-Speed Applications (2017 19th International Conference on Electrical Drives and Power Electronics). New York: Ieee, 2017, pp. 242-247.

[129]    B. Jurchis, N. Burnete, C. Iclodean, N. V. Burnete, and Iop, "Study of emissions for a compression ignition engine fueled with a mix of DME and diesel," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[130]    J. Kessler, N. Balc, A. Gebhardt, and K. Abbas, "Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[131]    A. O. Kilyen and T. S. Letia, "Platform for Unified Enhanced Time Petri Net Models," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 223-230.

[132]    S. A. Kollo, A. Puskas, and G. Kolla, "Influence of the Maintenance Work and Support Conditions on the Optimization Process of Railway Concrete Sleepers," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 68-75.

[133]    D. Lates, M. Casvean, and S. Moica, "Fabrication Methods of Compliant Mechanisms," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 221-225.

[134]    V. Laurentiu, P. Cardei, V. Vladut, and F. Lucian, "MODERN TRENDS IN DESIGNING AND SELECTING THE MACHINE/EQUIPMENT FOR DEEP SOIL TILLAGE," in 16th International Scientific Conference: Engineering for Rural Development, L. Malinovska and V. Osadcuks, Eds. (Engineering for Rural Development, Jelgava: Latvia Univ Agriculture, Faculty Engineering, Inst Mechanics, 2017, pp. 1415-1420.

[135]    P. Lazar et al., "Corrosion Evaluation of Some Phosphated Thin Layers on Reinforcing Steel," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[136]    A. V. Lazarescu, H. Szilagyi, C. Baera, and A. Ioani, "The Effect of Alkaline Activator Ratio on the Compressive Strength of Fly Ash-Based Geopolymer Paste," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[137]    L. Lefkovits, S. Lefkovits, S. Emerich, and M. F. Vaida, "Random Forest Feature Selection Approach for Image Segmentation," in Ninth International Conference on Machine Vision, vol. 10341, A. Verikas, P. Radeva, D. P. Nikolaev, W. Zhang, and J. Zhou, Eds. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2017.

[138]    S. Lefkovits, L. Lefkovits, and S. Emerich, Detecting the Eye and its Openness with Gabor Filters (2017 5th International Symposium on Digital Forensic and Security). New York: Ieee, 2017.

[139]    G. Lobontiu, M. Banica, and S. Ravai-Nagy, "Empirical evidences of owners' managerial behaviour - the case of small companies," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[140]    E. F. Luchian, A. Taut, I. A. Ivanciu, G. Lazar, and V. Dobrota, "Mobile Wireless Sensor Network Gateway: A Raspberry Pi implementation with a VPN backend to OpenStack," in 2017 25th International Conference on Software, Telecommunications and Computer Networks, D. Begusic, N. Rozic, J. Radic, and M. Saric, Eds. (International Conference on Software in Telecommunications and Computer Networks, New York: Ieee, 2017, pp. 271-275.

[141]    D. Lumelskyj, J. Rojek, D. Banabic, and L. Lazarescu, "Detection of strain localization in Nakazima formability test - experimental research and numerical simulation," in 17th International Conference on Sheet Metal, vol. 183, L. Fratini, Ed. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 89-94.

[142]    A. Lutas, D. Ticle, and O. Cret, Hypervisor based Memory Introspection: Challenges, Problems and Limitations (Icissp: Proceedings of the 3rd International Conference on Information Systems Security and Privacy). Setubal: Scitepress, 2017, pp. 285-294.

[143]    D. Maier, S. J. Irmer, I. Ceausu, R. Gavril, and A. Maier, Human Resource Management and Innovation Performance in Organizations (Sustainable Economic Growth, Education Excellence, and Innovation Management through Vision 2020, Vols I-Vii). Norristown: Int Business Information Management Assoc-Ibima, 2017, pp. 3480-+.

[144]    D. Maier, A. M. Verjel, A. Bercovici, and A. Maier, Innovation Management System - a Necessity for Business Performance (Sustainable Economic Growth, Education Excellence, and Innovation Management through Vision 2020, Vols I-Vii). Norristown: Int Business Information Management Assoc-Ibima, 2017, pp. 2881-+.

[145]    V. Maier, S. G. Pavel, H. G. Beleiu, S. C. Pica, and Ieee, "Vertical Earth Grounding Design Using Optimal Criteria," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 539-544.

[146]    R. Malutan, S. Emerich, S. Crisan, O. Pop, and L. Lefkovits, Dorsal Hand Vein Recognition Based on Riesz Wavelet Transform and Local Line Binary Pattern (2017 3rd International Conference on Frontiers of Signal Processing). New York: Ieee, 2017, pp. 146-150.

[147]    M. Marian, Z. Vosgan, O. M. Rosca, and L. Mihalescu, "Allelopathy relationship between plants and their use in organic farming," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[148]    K. A. Markowski, C. I. Muresan, and Ieee, Smart Beam System: Identification and Minimal Realization Using Digraphs Theory (2017 22nd International Conference on Methods and Models in Automation and Robotics). New York: Ieee, 2017, pp. 351-355.

[149]    K. Marton, B. Raluca, A. Suciu, and Ieee, "Counting Bits in Parallel," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[150]    V. Marusceac and M. Vlad, "Different Approach to Classic Structural Reinforcements Using Recycled Synthetic Materials," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 273-279.

[151]    C. M. Marza, G. D. Corsiuc, D. A. Ilutiu-Varvara, and E. Ceuca, "Case Study Regarding the Conversion Efficiency of Small Horizontal Axis Turbines," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 641-648.

[152]    O. Matei, T. Rusu, A. Petrovan, and G. Mihut, "A Data Mining System for Real Time Soil Moisture Prediction," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 837-844.

[153]    A. Mathe, I. Moldovan, A. Catarig, and N. Chira, Assessment of Passive Seismic Protection of Steel Structures (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 197-202.

[154]    N. Medan, M. Lobontiu, and M. Banica, "Full factorial DOE to determine the influence of the process parameters in cleaning water jets used in sewer cleaning," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[155]    V. C. Miclea, S. Nedevschi, and Ieee, "Semantic Segmentation-based Stereo Reconstruction with Statistically Improved Long Range Accuracy," in 2017 28th Ieee Intelligent Vehicles Symposium(IEEE Intelligent Vehicles Symposium, New York: Ieee, 2017, pp. 1795-1802.

[156]    I. O. Miron, D. L. Manea, D. M. Cantor, and C. Aciu, "Organic Thermal Insulation Based on Wheat Straw," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 674-681.

[157]    C. S. Miron-Borzan, M. C. Dudescu, and P. Berce, "Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[158]    L. Mocean, V. P. Bresfelean, and M. H. Macelaru, "A Proposal of an Academic Library Management System Based on an RDF Repository," in Business Information Systems Workshops, Bis 2016, vol. 263, W. Abramowicz, R. Alt, and B. Franczyk, Eds. (Lecture Notes in Business Information Processing, Cham: Springer International Publishing Ag, 2017, pp. 44-56.

[159]    C. Moga, S. I. Gutiu, and A. D. Danciu, "Material Consumption Reduction by using Steel Girders with Corrugated Webs," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 234-241.

[160]    L. Moga, C. Munteanu, I. Moga, F. Babota, and F. Tamas, Is a Green Roof an Effective Solution for Reducing Energy Consumption? (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 203-208.

[161]    C. Mojolic, R. Hulea, and B. R. Parv, "Automatic Design Optimization Tool for Passive Structural Control Systems," in Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2016, vol. 1863, T. Simos and C. Tsitouras, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[162]    C. Mojolic and T. Petrina, "Conceptual Optimization of Seismic Isolated Long Span Structures," in Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2016, vol. 1863, T. Simos and C. Tsitouras, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[163]    D. V. Moldovan, A. C. Nagy, L. E. Muntean, and M. Ciotlaus, "Study on the Stability of a Road Fill Embankment," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 60-67.

[164]    D. Moldovan, T. Cioara, I. Anghel, and I. Salomie, "Machine Learning for Sensor-Based Manufacturing Processes," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 147-154.

[165]    S. A. Moldovan, M. Cosma, and V. Nasui, "Establish the CNC machining strategy in relation with geometric complexity of the parts made from aluminum alloy extruded profile," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[166]    S. A. Moldovan, M. Cosma, and V. Nasui, "Experimental research about positioning correction of CNC machine with X-axis up to 12000 millimeters using laser measurement equipment," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[167]    A. Molea, P. Visuian, I. Barabas, R. C. Suciu, N. V. Burnete, and Iop, "Key fuel properties and engine performances of diesel-ethanol blends, using tetrahydrofuran as surfactant additive," in International Congress of Automotive and Transport Engineering - Mobility Engineering and Environment, vol. 252(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[168]    D. M. Muntean, V. Ungureanu, I. Petran, M. Georgescu, and Iop, "Large Prefabricated Concrete Panels Collective Dwellings from the 1970s: Context and Improvements," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - Wmcaus, vol. 245(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[169]    C. Munteanu, L. Moga, F. L. Tamas, D. R. Tamas-Gavrea, M. Suciu, and F. Babota, Study on the Acoustic Quality of the "Betania" Church from Cluj-Napoca (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 215-220.

[170]    C. Munteanu, D. R. Tamas-Gavrea, N. Cobirzan, C. Aciu, R. Fernea, and L. D. Demeter, "Study on the Acoustic Rehabilitation of an Educational Building," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 131-138.

[171]    I. C. Muresan and R. Balc, "Extended End-plate Connection Subjected to Monotonic Loading: Experimental Analysis and FEM Simulation," in Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2016, vol. 1863, T. Simos and C. Tsitouras, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[172]    I. C. Muresan and R. Balc, "Parametric Study of Extended End-plate Connection Using Finite Element Modeling," in Proceedings of the International Conference on Numerical Analysis and Applied Mathematics 2016, vol. 1863, T. Simos and C. Tsitouras, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[173]    M. P. Muresan, S. Nedevschi, and I. Giosan, "Real-Time Object Detection Using a Sparse 4-Layer LIDAR," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 317-322.

[174]    A. Mustea and D. L. Manea, "Influence of Polypropylene Fibers upon the Mechanical Characteristics of Reinforced Composite Mortars," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 338-345.

[175]    A. C. Nagy, D. V. Moldovan, M. Ciotlaus, and L. E. Muntean, "Evaluation of Experimental and Numerical Simulation of Triaxial Geogrid Reinforcement on the Strength of Road Structures," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 472-479.

[176]    S. Nas, R. Galgau, M. Bondrea, and A. Porutiu, Topographic Monitoring of Landmarks Placed In the Constructions' Foundations within the Area of Influence of a Closed Salt Mine (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 49-54.

[177]    V. Neagu and Ieee, "The Effects of Foam on Non-Contacting Radar-based Level Measurement," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 497-502.

[178]    E. Nedelcu, R. Portase, R. Tolas, R. Muresan, M. Dinsoreanu, and R. Potolea, "Artifact Detection in EEG using Machine Learning," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 77-83.

[179]    S. C. Nistor, A. C. Marina, A. S. Darabant, and D. Borza, "Automatic gender recognition for "in the wild" facial images using convolutional neural networks," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 287-291.

[180]    G. Oltean, L. N. Ivanciu, M. Gordan, I. Stoian, I. Kovacs, and Ieee, "Predictive model for the horizontal displacement of a dam using autoregressive neural network," in 2017 Ieee 21st International Conference on Intelligent Engineering Systems(IEEE International Conference on Intelligent Engineering Systems, New York: Ieee, 2017, pp. 33-38.

[181]    B. Oniga, V. Dadarlat, E. De Poorter, and A. Munteanu, "Analysis, design and implementation of secure LoRaWAN sensor networks," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 421-428.

[182]    R. Pacurar, A. Pacurar, and N. Balc, "Research on the mechanical behaviour of an airplane component made by selective laser melting technology," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[183]    S. Paduretu and A. G. Popa, "NEW CHALLENGES FOR A WIDER PERSPECTIVE ON ENGLISH AS A MEDIUM OF INSTRUCTION IN THE FIELD OF CIVIL ENGINEERING," in Inted2017: 11th International Technology, Education and Development Conference, L. G. Chova, A. L. Martinez, and I. C. Torres, Eds. (INTED Proceedings, Valenica: Iated-Int Assoc Technology Education a& Development, 2017, pp. 4440-4445.

[184]    G. A. Papiu and N. Suciu, "Arts and technology - Mosaic new techniques and procedures," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[185]    E. Papp, D. Racolta, L. Aur, and Z. Szakacs, "The Influence of the Elementary Charge on the Canonical Quantization of LC-Circuits," in Tim15-16 Physics Conference, vol. 1796, D. Vizman and A. Popescu, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2017.

[186]    P. Parau, C. Lemnaru, M. Dinsoreanu, and R. Potolea, OPINION LEADER DETECTION (Sentiment Analysis in Social Networks). San Francisco: Morgan Kaufmann Pub Inc, 2017, pp. 157-170.

[187]    A. Pastrav, E. Puschita, T. Palade, and Ieee, "Ionospheric Propagation Monitoring and TEC Measurements Using GPStation-6 GNSS Receiver," in 2017 11th European Conference on Antennas and Propagation(Proceedings of the European Conference on Antennas and Propagation, New York: Ieee, 2017, pp. 3887-3891.

[188]    L. Peculea, D. Andronache, and M. Bocos, "INDEPENDENT LEARNING AND REFLECTIVE THINKING OF THE FUTURE TEACHERS," in Edu World 7th International Conference, vol. 23, E. Soare and C. Langa, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2017, pp. 798-806.

[189]    T. Petrican, C. Stan, M. Antal, I. Salomie, T. Cioara, and I. Anghel, "Ontology-Based Skill Matching Algorithms," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 205-211.

[190]    A. Petrovai, A. D. Costea, S. Nedevschi, and Ieee, "Semi-Automatic Image Annotation of Street Scenes," in 2017 28th Ieee Intelligent Vehicles Symposium(IEEE Intelligent Vehicles Symposium, New York: Ieee, 2017, pp. 448-455.

[191]    C. M. Pintea, A. Calinescu, P. C. Pop, and C. Sabo, "Towards a Secure Two-Stage Supply Chain Network: A Transportation-Cost Approach," in International Joint Conference Soco'16- Cisis'16-Iceute'16, vol. 527, M. Grana, J. M. LopezGuede, O. Etxaniz, A. Herrero, H. Quintian, and E. Corchado, Eds. (Advances in Intelligent Systems and Computing, Cham: Springer International Publishing Ag, 2017, pp. 547-554.

[192]    C. Plesa, R. Morar, T. Plesa, M. Vadan, and Ieee, "The Original Patented Corona Multithreaded Electrode, for Rotating Cylinder Electroseparators," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 231-236.

[193]    C. Plesa, R. Morar, and M. L. Vadan, "Comparative analysis of the electroseparation results for the Aghires quartz sand in order to enrich it, using two types of active electrodes," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[194]    A. Pocola, A. Serban, and M. Balan, "Complex and efficient waste heat recovery system in aluminum foundry," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 504-509.

[195]    A. Pop and G. Iepure, "Research and development regarding the retaining mechanism of lead ions in industrial wastewaters using natural matter with remarkable properties," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[196]    C. B. Pop, V. R. Chifu, I. Salomie, D. S. Racz, and R. M. Bonta, "Hybridization of the Flower Pollination Algorithm-A Case Study in the Problem of Generating Healthy Nutritional Meals for Older Adults," in Nature-Inspired Computing and Optimization: Theory and Applications, S. Patnaik, X. S. Yang, and K. Nakamatsu, Eds. (Modeling and Optimization in Science and Technologies, Cham: Springer International Publishing Ag, 2017, pp. 151-183.

[197]    C. V. Pop, O. Birte, D. Fodorean, and Ieee, Noise and Vibrations Analysis of a Permanent Magnet Synchronous Machine for Light Electric Vehicle (2017 52nd International Universities Power Engineering Conference). New York: Ieee, 2017.

[198]    C. Pop et al., "Semantic Data Factory: A Framework for Using Domain Knowledge in Software Application Development," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 21-28.

[199]    M. Pop, O. Corbu, and P. Pernes, "Steel - Concrete Materials Performance in Composite Joints Configuration," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[200]    O. Pop and I. A. Letia, "On Explaining Inconsistencies in Multi-Context Streams as Support for the Human User," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 47-53.

[201]    O. Pop, L. F. Tutunaru, and M. Balan, "Numerical model for solidification and melting of PCM encapsulated in spherical shells," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 336-343.

[202]    P. P. Pop, A. Pop-Vadean, C. Barz, and T. Latinovic, "Transdisciplinary integration and interfacing software in mechatronic system for carbon sequestration and harvesting energy in the agricultural soils for rewarding farmers through green certificates," in International Conference on Applied Sciences, vol. 163, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[203]    P. P. Pop, A. Pop-Vadean, C. Barz, T. Latinovic, and O. Chiver, "System monitoring feedback in cinemas and harvesting energy of the air conditioning condenser," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[204]    A. Pop-Vadean, P. P. Pop, T. Latinovic, C. Barz, and C. Lung, "Harvesting energy an sustainable power source, replace batteries for powering WSN and devices on the IoT," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[205]    F. Popa, T. F. Marinca, H. F. Chicinas, O. Isnard, I. Chicinas, and Iop, "Ni-Mn-Sn Heusler: milling and annealing effect on structural and magnetic properties," in 8th Joint European Magnetic Symposia, vol. 903(Journal of Physics Conference Series, Bristol: Iop Publishing Ltd, 2017.

[206]    I. A. Popan, A. I. Popan, S. C. Cosma, and A. Carean, "Analyses of process parameters influence on the drilling process by using carbide drills for steel St52-3," in 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 - Cosme'16, vol. 94, G. Oancea and M. V. Dragoi, Eds. (MATEC Web of Conferences, Cedex A: E D P Sciences, 2017.

[207]    R. Porumb, B. Porumb, and M. Balan, "Numerical investigation on solar absorption chiller with LiBr-H2O operating conditions and performances," in Sustainable Solutions for Energy and Environment, Eenviro 2016, vol. 112, A. Anton et al., Eds. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2017, pp. 108-117.

[208]    D. M. Preradovic, L. S. Micic, and C. Barz, "Software for improving the quality of project management, a case study: international manufacture of electrical equipment," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[209]    A. Puskas, O. Corbu, and S. A. Kollo, Testing on Concrete Surface Repair with Tri Component Epoxy Resin System (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 239-244.

[210]    M. Pustan, C. Birleanu, C. Dudescu, and F. Rusu, "Investigation on the contact behaviour of MEMS micromembrane with serpentine hinges," in 13th International Conference on Tribology, vol. 174, M. Ripa, R. G. Ripeanu, and T. Cicone, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[211]    A. M. Rad, T. H. Popa, V. D. Mihon, B. Iancu, and Ieee, "Problem-Based Learning And Project-Based Learning Concepts And Their Applications To Engineering Education," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[212]    K. Ronay, D. Bica, and C. Munteanu, "Micro-Grid Development Using Artificial Neural Network for Renewable Energy Forecast and System Control," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 818-823.

[213]    R. B. Roxana, D. Eva-Henrietta, and Iop, "Fault-tolerant Control of a Cyber-physical System," in 2017 International Conference on Artificial Intelligence Applications and Technologies, vol. 261(IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[214]    M. Ruba, S. Ciornei, H. Hedesiu, C. Martis, and Ieee, "Complete FPGA Based Real-Time Motor Drive Simulator With Bidirectional Battery And Ultracapacitor Power Supply," in 2017 10th International Symposium on Advanced Topics in Electrical Engineering(International Symposium on Advanced Topics in Electrical Engineering, New York: Ieee, 2017, pp. 186-191.

[215]    I. D. Rus, P. Marc, M. Dinsoreanu, R. Potolea, and R. C. Muresan, "Classification of EEG signals in an Object Recognition task," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 391-395.

[216]    C. Rusu, J. Astola, and Ieee, Convergence Analysis of Error-Reduction Algorithm for Solving of the Extended One-Dimensional Discrete Phase Retrieval Problem (2017 International Symposium on Signals, Circuits and Systems). New York: Ieee, 2017.

[217]    R. Rusu-Both, Dynamic Mathematical Modelling and Advanced Control Strategies for Complex Hydrogenation Process (New Advances in Hydrogenation Processes - Fundamentals and Applications). Rijeka: Intech Europe, 2017, pp. 327-351.

[218]    C. Sabo, P. C. Pop, H. Valean, and D. Danciulescu, "An Innovative Approach to Manage Heterogeneous Information Using Relational Database Systems," in Intelligent Systems Design and Applications, vol. 557, A. M. Madureira, A. Abraham, D. Gamboa, and P. Novais, Eds. (Advances in Intelligent Systems and Computing, Cham: Springer International Publishing Ag, 2017, pp. 1-10.

[219]    V. Samuila, V. F. Soporan, G. Contiu, S. Paduretu, T. R. Lehene, and M. M. Vescan, "Hierarchical modeling of professional skills in the field of castings manufacture engineering," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[220]    H. Sandor and G. Sebestyen-Pal, Optimal Security Design in the Internet of Things (2017 5th International Symposium on Digital Forensic and Security). New York: Ieee, 2017.

[221]    I. M. Sas-Boca, M. Tintelecan, M. Pop, D. A. Ilutiu-Varvara, and A. M. Mihu, "The Wire Drawing Process Simulation and the Optimization of Geometry Dies," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 187-192.

[222]    M. Senila, A. Handabut, A. Crisan, and I. Petran, Experimental Studies Regarding the Influence of the Connection between Steel and Concrete in Case of Eccentrically Braced Frames (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 245-250.

[223]    R. R. Slavescu and C. Cenan, "On a Diacritics Due Part-of-Speech Tagging Ambiguity in Romanian," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 119-123.

[224]    T. M. Soimosan and R. A. Felseghi, "Comparative Thermo-Energetic Analysis of the District Heating Systems that Harness Renewable Energy Sources," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 754-761.

[225]    M. Stet, "Characteristics of the Romanian energy market," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[226]    D. Stoicovici, M. Banica, M. Ungureanu, and M. Stoicovici, "The impact of collaborations between universities and private organizations on cluster development and competitiveness in Romania," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[227]    F. Suciu, A. Dascalescu, and M. Ungureanu, "From design to manufacturing of asymmetric teeth gears using computer application," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[228]    R. Szabo and A. Groza, "Analysing debates on climate change with textual entailment and ontologies," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 39-46.

[229]    F. L. Tamas, L. M. Moga, C. Munteanu, D. Taus, and F. Babota, The Multi-Criteria Analysis of the Waterproof Rehabilitation Methods of the Buildings' Infrastructure (Modern Technologies for the 3rd Millennium). Pianoro: Editografica S R L, 2017, pp. 267-272.

[230]    G. Tamas, D. Fodorean, and Ieee, Model in the Loop Simulation of an Electric Propulsion System Using Virtual Reality (2017 52nd International Universities Power Engineering Conference). New York: Ieee, 2017.

[231]    L. Tausan, "THE STUDENT-CENTRED PARADIGM AND THE OPTIMIZATION OF THE LEARNING PROCESS," in Edu World 7th International Conference, vol. 23, E. Soare and C. Langa, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2017, pp. 380-388.

[232]    M. Tintelecan, I. M. Sas-Boca, and D. A. Ilutiu-Varvara, "The Influence of the Dies Geometry on the Drawing Force for Steel Wires," in 10th International Conference Interdisciplinarity in Engineering, Inter-Eng 2016, vol. 181, L. Moldovan and A. Gligor, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2017, pp. 193-199.

[233]    C. Toader and R. Toader, REPLICATION MODEL FOR DETERMINISTIC SYSTEMS WITH REMOTE EXECUTION (Proceedings of the 16th International Conference on Informatics in Economy). Bucharest: Bucharest Univ Economic Studies-Ase, 2017, pp. 46-51.

[234]    L. Todea and R. Demarcsek, "Needs analysis for language course design. A case study for engineering and business students," in Innovative Ideas in Science 2016, vol. 200, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[235]    A. Todorut, N. Cordos, I. Barabas, and S. Mihet, Evaluation by Experimental Methods of the Parameters that Influence the Behavior of Various Passenger Cars Classes in the Braking Process (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer Int Publishing Ag, 2017, pp. 75-82.

[236]    D. Toniuc and A. Groza, "Climebot: an argumentative agent for climate change," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 63-70.

[237]    M. Ungureanu, N. S. Ungureanu, and I. Craciun, "Study on friction behaviour of brake shoe materials for mining hoist," in 13th International Conference on Tribology, vol. 174, M. Ripa, R. G. Ripeanu, and T. Cicone, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[238]    N. S. Ungureanu, A. Petrovan, M. Ungureanu, and M. Alexandrescu, "Functioning condition monitoring of industrial equipment," in 13th International Conference on Tribology, vol. 174, M. Ripa, R. G. Ripeanu, and T. Cicone, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[239]    D. Vais, The (in)Famous Anca Petrescu Authorship and authority in Romanian Communist architecture, 1977-1989 (Ideological Equals: Women Architects in Socialist Europe 1945-1989). Abingdon: Routledge, 2017, pp. 139-154.

[240]    F. I. Vancea, A. D. Costea, and S. Nedevschi, "Vehicle taillight detection and tracking using deep learning and thresholding for candidate generation," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 267-272.

[241]    B. O. Varga, N. Burnete, and C. Iclodean, Validation Procedure for Worldwide Harmonized Light Vehicles Test Cycle via Hardware in the Loop - Real Time Testing (Conat 2016: International Congress of Automotive and Transport Engineering). Cham: Springer International Publishing Ag, 2017, pp. 128-135.

[242]    R. Varga and S. Nedevschi, "Lazy Feature Extraction and Boosted Classifiers for Object Detection," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 325-330.

[243]    M. M. Vescan, V. F. Soporan, D. M. Crisan, T. R. Lehene, S. Paduretu, and V. Samuila, "Engineering of the institutionalization of the circular economy at the level of casting production," in International Conference on Innovative Research - Icir Euroinvent 2017, vol. 209, A. V. Sandu, M. M. A. Abdullah, P. Vizureanu, C. M. R. Ghazali, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2017.

[244]    C. Vicas, I. Rusu, N. Al Hajjar, and M. Lupsor-Platon, "Deep Convolutional Neural Nets for Objective Steatosis Detection from Liver Samples," in 2017 13th Ieee International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2017, pp. 385-390.

[245]    A. Voina et al., "Implementation of a SDR-based Redundant Access Network using NI USRP-RIO," in 2017 16th Roedunet Conference: Networking in Education and Research(RoEduNet International Conference, New York: Ieee, 2017.

[246]    A. Ward, I. Grout, L. Grindei, and D. Mandru, "FINAL YEAR UNDERGRADUATE STUDENT PROJECTS AS A VEHICLE FOR RAISING STUDENT AWARENESS OF DISABILITIES," in Inted2017: 11th International Technology, Education and Development Conference, L. G. Chova, A. L. Martinez, and I. C. Torres, Eds. (INTED Proceedings, Valenica: Iated-Int Assoc Technology Education a& Development, 2017, pp. 748-755.

[247]    D. M. Zhou, Y. M. Wu, F. Gao, E. Breaz, A. Ravey, and A. Miraoui, "Degradation Prediction of PEM Fuel Cell Stack Based on Multiphysical Aging Model With Particle Filter Approach," Ieee Transactions on Industry Applications, vol. 53, no. 4, pp. 4041-4052, Jul-Aug 2017.