ISI Proceedings 2016

[1]    I. M. Alexandru, L. Viman, D. Pitica, and Ieee, Implementation of a Microwave Elliptical low pass Filter with radial Stubs (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 59-62.

[2]    H. Alharthi, S. Hazra, D. Banabic, and R. Dashwood, "Analytical methodology for the determination of the flow curves of aluminum and steel alloys using the hydraulic bulge tests," in Proceedings of the 19th International Esaform Conference on Material Forming, vol. 1769, F. Chinesta, E. Cueto, and E. AbissetChavanne, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2016.

[3]    L. Anastasiu, Amier, and Academia, "MITIGATING THE RISKS IN CIVIL ENGINEERING PROJECTS USING MULTI-CRITERIA METHODS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 463-+.

[4]    D. M. Andres, D. L. Manea, R. Fechete, and E. Jumate, "Clay Mortar Performance Improvement by Modifying the Physical Characteristics of Wheat Straw," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 335-342.

[5]    D. M. Andres, D. L. Manea, R. Fechete, and E. Jumate, "Green Plastering Mortars Based on Clay and Wheat Straw," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 327-334.

[6]    D. Angel, C. Cristiana, N. Ilinca, B. Florin, S. Mihnea, and Sgem, "COMFORT EVALUATION USING A THERMAL MANIKIN. COMPARISON TO SUBJECTIVE PERCEPTION," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 283-290.

[7]    D. Angel, C. Cristiana, N. Ilinca, B. Florin, S. Mihnea, and Sgem, "LIFE SUPPORT SYSTEMS ON SPACE STATIONS - CURRENT PROBLEMS AND POSSIBLE SOLUTIONS," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 195-202.

[8]    I. Anghel, T. Cioara, and I. Salomie, "Context-Aware and Reinforcement Learning-Based Load Balancing System for Green Clouds," in Resource Management for Big Data Platforms: Algorithms, Modelling, and High-Performance Computing Techniques, F. Pop, J. Kolodziej, and B. DiMartino, Eds. (Computer Communications and Networks Series, Cham: Springer International Publishing Ag, 2016, pp. 129-144.

[9]    I. Anghel, T. Cioara, and I. Salomie, "ICT Architecture for Supporting Elder Employees to Make Conscious Decisions Under Time Pressure," in State-of-the-Art and Future Directions of Smart Learning, Y. Li et al., Eds. (Lecture Notes in Educational Technology, Singapore: Springer-Verlag Singapore Pte Ltd, 2016, pp. 251-255.

[10]    A. Antal, V. Bota, and Ieee, On the Performance of Hybrid-ARQ Algorithms on Rayleigh-Faded Wireless Channels (2016 International Conference on Communications). New York: Ieee, 2016, pp. 217-222.

[11]    M. Antal, C. Pop, D. Valea, T. Cioara, I. Anghel, and I. Salomie, "Optimizing Data Centres Operation to Provide Ancillary Services On-Demand," in Economics of Grids, Clouds, Systems, and Services, Gecon 2015, vol. 9512, J. Altmann, G. C. Silaghi, and O. F. Rana, Eds. (Lecture Notes in Computer Science, Cham: Springer Int Publishing Ag, 2016, pp. 133-146.

[12]    A. Apatean, A. Rogozan, and A. Bensrhair, "Image Features Extraction, Selection and Fusion for Computer Vision," in Image Feature Detectors and Descriptors: Foundations and Applications, vol. 630, A. I. Awad and M. Hassaballah, Eds. (Studies in Computational Intelligence, Berlin: Springer-Verlag Berlin, 2016, pp. 75-107.

[13]    A. L. Apreutesei et al., "Radiation Reduction Capabilities of Some Woven Fabrics with Metallic Yarns Attached to Mobile Phones Emitting in 2G-and 3G-Communication Standards," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 387-391.

[14]    M. Arghir and I. L. Lapusan, "Study on mechanics of bodies under the action of sound pollution in industrial halls. Part II: Analysis of sound pressure inside the hall," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[15]    C. G. Bacila, R. C. Bacila, Amier, and Academia, "GREEN MARKETING - A BASIC COMPONENT OF SUSTAINABLE DEVELOPMENT," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 442-455.

[16]    I. H. Baciu, S. Pop, V. Bande, and Ieee, Analysing of Half-Bridge Inverter Using the Simulink Platform (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 151-154.

[17]    C. Baera, D. Snoeck, H. Szilagyi, C. Mircea, N. De Belie, and Sgem, "DYNAMIC LOADING PERFORMANCE OF FIBRE ENGINEERED CEMENTITIOUS MATERIALS WITH SELF-HEALING CAPACITY (SHFECM)," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 91-98.

[18]    H. Balan, M. I. Buzdugan, T. Varodi, R. A. Munteanu, and Ieee, "Monitoring power breakers using vibro acoustic techniques," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[19]    H. Balan, L. Neamt, M. I. Buzdugan, T. Varodi, and E. Pop, "Fault current limiter with solid-state circuit breakers," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[20]    A. A. Balog, N. Cobirzan, R. C. Suciu, E. Mosonyi, and C. Aciu, "Mineralogical Assessment Regarding the Sustainability of Mortars Exposed to Sodium Sulfate Attack," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 298-303.

[21]    D. Banabic, "Multiscale Modelling in Sheet Metal Forming Preface," in Multiscale Modelling in Sheet Metal Forming, D. Banabic, Ed. (ESAFORM Bookseries on Material Forming, Cham: Springer International Publishing Ag, 2016, pp. VII-X.

[22]    D. Banabic, D. S. Comsa, P. Eyckens, A. Kami, and M. Gologanu, "Advanced Models for the Prediction of Forming Limit Curves," in Multiscale Modelling in Sheet Metal Forming, D. Banabic, Ed. (ESAFORM Bookseries on Material Forming, Cham: Springer International Publishing Ag, 2016, pp. 205-300.

[23]    D. Banabic, D. S. Comsa, and J. Gawad, "Plastic Behaviour of Sheet Metals," in Multiscale Modelling in Sheet Metal Forming, D. Banabic, Ed. (ESAFORM Bookseries on Material Forming, Cham: Springer International Publishing Ag, 2016, pp. 1-46.

[24]    S. Banuleasa, R. Munteanu, A. Rusu, and G. Tont, "IoT System for Monitoring Vital Signs of Elderly Population," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 59-64.

[25]    D. Banyai, I. Sfarlea, and D. Opruta, "Experimental research on variable hydraulic resistors of servo-hydraulic valves," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 44-51.

[26]    I. Barbantan and R. Potolea, Learning Diagnosis from Electronic Health Records (Kdir: Proceedings of the 8th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management - Vol. 1). Setubal: Scitepress, 2016, pp. 344-351.

[27]    N. Barkoczi, L. Bacali, M. Lobontiu, Amier, and Academia, "THEORETICAL ASPECTS OF USING AHP METHOD IN FORECASTING THE NUMBER OF NEW TECHNOLOGY POTENTIAL ADOPTERS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 435-441.

[28]    C. Barz, O. Chiver, E. Zoltan, M. Horgos, and D. Preradovic, "Automation with MFD Titan for Lighting Control," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 466-471.

[29]    C. Barz, S. I. Deaconu, T. Latinovic, A. Berdie, A. Pop-Vadean, and M. Horgos, "PLCs used in smart home control," in International Conference on Applied Sciences 2015, vol. 106, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[30]    C. Barz, M. Ilia, T. Ilut, A. Pop-Vadean, P. P. Pop, and F. Dragan, "Weintek interfaces for controlling the position of a robotic arm," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[31]    C. Barz, C. Todea, T. Latinovic, D. M. Preradovic, S. Deaconu, and A. Berdie, "Intelligent traffic control system using PLC," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[32]    P. Bechet, S. Miclaus, A. Miclaus, C. Balint, and Ieee, "Experimental Analysis of Noise Level and Channels Availability for High Frequency OFDM Data Transmission in NVIS Propagation Conditions," in Proceedings of the 2016 International Symposium on Electromagnetic Compatibility - Emc Europe(EMC Europe, New York: Ieee, 2016, pp. 844-849.

[33]    V. Berinde and M. Pacurar, Iterative Approximation of Fixed Points of Single-valued Almost Contractions (Fixed Point Theory and Graph Theory: Foundations and Integrative Approaches). London: Academic Press Ltd-Elsevier Science Ltd, 2016, pp. 29-97.

[34]    V. Berinde, A. Petrusel, I. A. Rus, and M. A. Serban, "The Retraction-Displacement Condition in the Theory of Fixed Point Equation with a Convergent Iterative Algorithm," in Mathematical Analysis, Approximation Theory and Their Applications, vol. 111, T. M. Rassias and V. Gupta, Eds. (Springer Optimization and Its Applications, Cham: Springer International Publishing Ag, 2016, pp. 75-106.

[35]    V. Berinde and I. A. Rus, Caristi-Browder Operator Theory in Distance Spaces (Fixed Point Theory and Graph Theory: Foundations and Integrative Approaches). London: Academic Press Ltd-Elsevier Science Ltd, 2016, pp. 1-28.

[36]    D. Beu, C. Ciugudeanu, R. Gyulai, and Sgem, "LIGHT GUIDING OPTICAL LAMELLAE SYSTEM SIMULATIONS," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 143-150.

[37]    D. Beu, C. Ciugudeanu, M. Maierean, C. Galatanu, and Sgem, "INTRODUCING A NEW PROFESSION: LIGHTING SPECIALIST," in Ecology, Economics, Education and Legislation Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 863-869.

[38]    C. Birleanu, M. Pustan, and Ieee, The Effect of Film Thickness on the Tribo-mechanical Properties of the Chrome-Gold Thin Film (2016 Symposium on Design, Test, Integration and Packaging of Mems/Moems). New York: Ieee, 2016.

[39]    C. Birleanu et al., "Temperature effect on the mechanical properties of gold nano films with different thickness," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[40]    I. R. Birs, C. I. Muresan, S. Folea, O. Prodan, L. Kovacs, and Ieee, "Vibration suppression with fractional-order (PID mu)-D-lambda controller," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 413-418.

[41]    I. R. Birs, I. Nascu, C. Darab, and Ieee, "Modelling and calibration of a conventional activated sludge wastewater treatment plant," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 257-262.

[42]    I. Birsan, C. Munteanu, M. Horgos, and T. Ilut, "Analysis of the grounding system for a mobile communication site placed on HV power line mast," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[43]    C. Boanta, C. Brisan, and Ieee, "Topology Based Enhancement of the Workspace of a Reconfigurable Parallel Haptic Interface," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 191-196.

[44]    G. D. Boca, L. Mukaj, and M. Vishkurti, A Comprehensive Model of factors for Sustainable Leadership (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 2074-2084.

[45]    G. D. Boca, L. Mukaj, and M. Vishkurti, A Guide of Culture Model for ascension on Education Pyramid (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 790-806.

[46]    S. D. Bolboaca and L. Jantschi, Counting Distance and Szeged (on Distance) Polynomials in Dodecahedron Nano-assemblies (Distance, Symmetry, and Topology in Carbon Nanomaterials). Dordrecht: Springer, 2016, pp. 391-408.

[47]    R. A. Boldizsar, M. Ordean, and C. Giurgea, "ON THE SOUND PROCESSING COMPONENT OF A TEXT TO SPEECH SYSTEM FOR THE ROMANIAN LANGUAGE," in International Conference on Informatics in Economy, Ie 2016: Education, Research & Business Technologies, C. Boja et al., Eds. (International Conference on Informatics in Economy, Bucharest: Bucharest Univ Economic Studies-Ase, 2016, pp. 456-461.

[48]    A. Bona, C. Lemnaru, and R. Potolea, Syllabification with Frequent Sequence Patterns A Language Independent Approach (Kdir: Proceedings of the 8th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management - Vol. 1). Setubal: Scitepress, 2016, pp. 352-359.

[49]    M. V. Bondrea, S. Nas, R. Farcas, M. Dirja, P. Sestras, and Sgem, "CONSTRUCTION SURVEY AND PRECISION ANALYSIS USING RTK TECHNOLOGY AND A TOTAL STATION AT AXIS STAKE-OUT ON A CONSTRUCTION SITE," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 155-161.

[50]    D. Borza and R. Danescu, Eye Shape and Corners Detection in Periocular Images Using Particle Filters (2016 12th International Conference on Signal-Image Technology & Internet-Based Systems). New York: Ieee, 2016, pp. 15-22.

[51]    M. Boscoianu, L. Bacali, E. Calefariu, Amier, and Academia, "TOWARDS AN INTELLIGENT ACADEMIC REVOLUTION - THE NEW ROLE OF CHANGE LEADERSHIP IN TURBULENT AND CRISIS PERIODS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 233-239.

[52]    V. Bota, M. Varga, and Ieee, On the BER and Spectral Efficiency Performances of Coded QAM Configurations that Map Non-Coded Bits (2016 International Conference on Communications). New York: Ieee, 2016, pp. 223-228.

[53]    S. Brad, B. Mocan, E. Brad, and M. Fulea, "TRIZ to support blue-design of products," in Structured Innovation with Triz in Science and Industry: Creating Value for Customers and Society, vol. 39, I. Belski, Ed. (Procedia CIRP, Amsterdam: Elsevier Science Bv, 2016, pp. 125-131.

[54]    S. Brad, M. Murar, and E. Brad, "Methodology for lean design of disruptive innovations," in 26th Cirp Design Conference, vol. 50, L. Wang and T. Kjellberg, Eds. (Procedia CIRP, Amsterdam: Elsevier Science Bv, 2016, pp. 153-159.

[55]    I. Brandusoiu, G. Toderean, H. Beleiu, and Ieee, Methods for Churn Prediction in the Pre-Paid Mobile Telecommunications Industry (2016 International Conference on Communications). New York: Ieee, 2016, pp. 97-100.

[56]    R. Brehar, C. Vancea, F. Oniga, M. Negru, and S. Nedevschi, "A Study of the Impact of HOG and LBP Based Temporal Association On Far Infrared Pedestrian Detection," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 263-268.

[57]    V. P. Bresfelean, L. Mocean, M. Hajdu-Macelaru, and Sgem, "EDUCATIONAL PORTALS. CURRENT STUDIES AND STEPS FOR CREATING THE ETRAJECTORY PORTAL," in Sgem 2016, Bk 1: Psychology and Psychiatry, Sociology and Healthcare, Education Conference Proceedings, Vol Iii(International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Sofia: Stef92 Technology Ltd, 2016, pp. 271-278.

[58]    V. M. Brezoczki, "The dynamics of the fungal aerospores Alternaria sp and Cladosporium sp in Parisian atmospheric air, in France," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[59]    I. Bud, S. Duma, D. Gusat, I. Pasca, and A. Bud, "Environmental risks of abandoning a mining project already started: Romaltyn Mining Baia Mare," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[60]    I. Bud, S. Duma, D. Gusat, Pasca, II, A. Bud, and Sgem, "CONSIDERATIONS ABOUT MODIFIED CELLULOSE NANOFIBERS (NFC) APPLICATIONS IN DEWATERING FINE MATERIAL FROM TAILING PONDS. STUDIES ON PHYSICAL MODELS," in 16th International Multidisciplinary Scientific Geoconference, Sgem 2016: Science and Technologies in Geology, Exploration and Mining, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 173-180.

[61]    I. Bud, S. Duma, D. Gusat, Pasca, II, A. Bud, and Sgem, "THE USE OF COMPUTER MODEL IN GEOMETRIZATION OF TAILING POND WITH IRREGULARLY SHAPED FOOTPRINT. CASE STUDY: AURUL TAILING POND, BAIA MARE," in 16th International Multidisciplinary Scientific Geoconference, Sgem 2016: Science and Technologies in Geology, Exploration and Mining, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 935-941.

[62]    K. Budai, I. Barbantan, M. Dinsoreanu, and R. Potolea, "Learning Relations using Semantic-based Vector Similarity," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 69-75.

[63]    L. Busoniu, E. Pall, R. Munos, and Ieee, "Discounted near-optimal control of general continuous-action nonlinear systems using optimistic planning," in 2016 American Control Conference(Proceedings of the American Control Conference, New York: Ieee, 2016, pp. 203-208.

[64]    G. Cabau, M. Buhu, and C. Oprisa, "Malware Classification Based on Dynamic Behavior," in Proceedings of 2016 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, J. Davenport et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 315-318.

[65]    G. Cabau, M. Buhu, C. Oprisa, and Ieee, "Malware Classification Using Filesystem Footprints," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 103-108.

[66]    R. D. Cadar, R. M. Boitor, M. Petrelli, and Sgem, "TRAVEL BEHAVIOR ASSESSMENT FOR IMPROVED URBAN MOBILITY," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 771-778.

[67]    S. Cadar et al., "Temperature and Power Consumption for Tungsten Coil in the Drying Process of Liquid Samples," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 348-352.

[68]    S. Cadar, E. Radu, T. Patarau, D. Petreus, F. S. Maxime, and Ieee, Simulation & Modelling of a Tungsten Filament with COMSOL for Electrothermal Process (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 165-170.

[69]    G. Calatan, A. Hegyi, C. Dico, and C. Mircea, "Determining the Optimum Addition of Vegetable Materials in Adobe," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 259-265.

[70]    S. Campean, L. Morar, E. M. Campean, I. Ulici, Amier, and Academia, "THE NEED ANALYSIS OF THE CITIZENS IN RELATION TO PUBLIC ADMINISTRATION," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 224-232.

[71]    C. M. Campian, V. C. Iuhos, and Sgem, "STUDIES ON IMPROVING THE STRUCTURAL BEHAVIOUR OF STEEL LATTICE TOWERS FOR HIGH VOLTAGE OVERHEAD POWER LINES," in Ecology, Economics, Education and Legislation Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 751-758.

[72]    C. Campian, N. Chira, V. Iuhos, M. Pop, and N. Vatin, "Structural upgrading of steel columns for overhead power lines," in 15th International Scientific Conference Underground Urbanisation as a Prerequisite for Sustainable Development, vol. 165, S. Alpatov, O. Prentkovskis, R. L. Sterling, and D. Kaliampakos, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 876-882.

[73]    C. Campian, V. Iuhos, M. Pop, N. Chira, and Sgem, "RETOFITTING OF EXISTING INDUSTRIAL BUILDINGS," in Ecology, Economics, Education and Legislation Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 695-702.

[74]    C. Campian and M. Pop, "Methods for elimination of dampness in Building walls," in International Conference on Innovative Research - Icir Euroinvent 2016, vol. 133, A. V. Sandu, M. M. B. Abdullah, P. Vizureanu, S. Z. AbdRahim, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[75]    C. Cara, A. Groza, S. Zaporojan, and I. Calmicov, "Assisting Drivers During Overtaking Using Car-2-Car Communication and Multi-Agent Systems," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 293-299.

[76]    N. Cennamo, R. Galatus, F. Mattiello, R. Sweid, and L. Zeni, "Design of surface plasmon resonance sensor in plastic optical fibers based on nano-antenna arrays," in Proceedings of the 30th Anniversary Eurosensors Conference - Eurosensors 2016, vol. 168, I. Barsony, Z. Zolnai, and G. Battistig, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 880-883.

[77]    E. Ceuca, I. Pocan, O. Pop, and Ieee, "Electromagnetic Compatibility Analysis of the Assembly e-bike - Power Electronic Converter with Recovery Function," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 398-401.

[78]    F. Chauvicourt et al., Review of Multidisciplinary Homogenization Techniques applied to Electric Machines (2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies). New York: Ieee, 2016.

[79]    F. Chetan, T. Rusu, I. Porumb, M. Coman, P. I. Moraru, and Sgem, "INFLUENCE OF THE SOIL TILLAGE SYSTEM ON MORPHOPRODUCTIVE ELEMENTS, NODULATION AND SOYBEAN YIELDS," in Water Resources, Forest, Marine and Ocean Ecosystems Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 173-184.

[80]    S. Chetan, C. Festila, E. H. Dulf, and Ieee, "Photovoltaic Panel Structural Models for Control," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 293-298.

[81]    I. Chian, V. Muresan, T. Colosi, M. L. Unguresan, and Ieee, "Control Structure Design for an O-18 Isotope Separation Column," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 507-512.

[82]    V. R. Chifu, I. Salomie, L. Petrisor, E. S. Chifu, and D. Moldovan, "Hybrid Immune Based Method for Generating Healthy Meals for Older Adults," in Proceedings of 2016 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, J. Davenport et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 248-255.

[83]    M. Chirca, C. Oprea, P. D. Teodosescu, S. Breban, and Ieee, "Optimal Design of a Radial Flux Spoke-Type Interior Rotor Permanent Magnet Generator for Micro-Wind Turbine Applications," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[84]    S. Chirila, C. Lemnaru, and M. Dinsoreanu, "Semantic-based IoT device discovery and recommendation mechanism," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 111-116.

[85]    O. Chiver, L. Neamt, and E. Pop, "Transient Analysis of Wound Rotor Synchronous Motor Synchronisation Using Finite Elements Method," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 225-228.

[86]    O. Chiver, L. Neamt, E. Pop, C. Barz, A. V. Pop, and Ieee, Identification of parameters of single-phase PM synchronous Motor (2016 Ieee 16th International Conference on Environment and Electrical Engineering). New York: Ieee, 2016.

[87]    S. Ciceo et al., Model-Based Design and Testing for Electric Vehicle Driveability Analysis (2016 Ieee 16th International Conference on Environment and Electrical Engineering). New York: Ieee, 2016.

[88]    G. Ciobanu and E. N. Todoran, "Continuation Semantics for Dynamic Hierarchical Systems," in 2015 17th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, L. Kovacs et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 281-288.

[89]    G. Ciobanu and E. N. Todoran, "Continuation Semantics of a Language Inspired by Membrane Computing with Symport/Antiport Interactions," in Proceedings of 2016 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, J. Davenport et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 335-342.

[90]    I. Ciocan, C. Farcas, A. Grama, A. Tulbure, and Ieee, An Improved Method for the Electrical Parameters Identification of a Simplified PSpice Supercapacitor Model (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 171-174.

[91]    D. I. Ciolea, T. Rusu, E. Dunca, M. Lazar, S. Popescu, and Sgem, "RESEARCH ON THE OBTAINING OF ENERGY IN THE SEWAGE SLUDGE AND EXPLOITING THE RESIDUE TO THE STERILE DEPOSIT," in Ecology, Economics, Education and Legislation Conference Proceedings, Sgem 2016, Vol I(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 585-592.

[92]    N. Ciont, N. Pop, M. Iliescu, and Sgem, "STRUCTURAL ANALYSIS OF COLD IN-PLACE RECYCLED ASPHALT MIXTURES, WITH ADDED GLASS FIBRE," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 133-140.

[93]    B. Cioruta, M. Coman, and Sgem, "ASPECTS REGARDING THE LIMITED POPULATION GROWTH MODELS CHARACTERIZED BY THE LOGISTIC EQUATION APPLETS," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol I(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 429-436.

[94]    S. A. Ciplea, L. Anastasiu, D. Sucala, M. N. Roman, Amier, and Academia, "A CASE STUDY FOR COSTS OPTIMIZATION IN A CONSTRUCTION COMPANY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 276-282.

[95]    C. Ciugudeanu and D. Beu, "Passive Tubular Daylight Guidance System Survey," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 690-696.

[96]    C. Ciugudeanu, D. Beu, and E. Rastei, "Living Building Laboratory - Educational Building Project in Cluj-Napoca," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 125-131.

[97]    A. Ciupe, C. Florea, B. Orza, A. Vlaicu, and B. Petrovan, "A Bag of Words Model for Improving Automatic Stress Classification," in Proceedings of the Second International Afro-European Conference for Industrial Advancement, vol. 427, A. Abraham, K. WegrzynWolska, A. E. Hassanien, V. Snasel, and A. M. Alimi, Eds. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 339-349.

[98]    I. Clitan, M. Abrudean, V. Muresan, and D. Sas, "Optimizing the Casting Length of Single Diameter Steel Billets Based on Minimum Cost," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 73-78.

[99]    T. Colosi, M. Abrudean, M. L. Unguresan, V. Muresan, and Ieee, "Applications of (M-pdx) Method in the Numerical Simulation of Distributed and Lumped Parameter Processes, for Isotopic Separation Columns," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 519-523.

[100]    M. Coman, B. Cioruta, R. Ghisa, and Sgem, "PERIODIC EVALUATION OF THE QUALITY STATE OF POLLUTED SOILS IN THE HERJA MINING AREA, ROMANIA," in Water Resources, Forest, Marine and Ocean Ecosystems Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 243-248.

[101]    M. Coman, A. Muntean, T. Rusu, B. Cioruta, and Sgem, "REGARDING NUTRITIVE ELEMENTS IN THE SOIL OF A REHABILITATED FORMER MINING TAILINGS DUMPSITE," in Water Resources, Forest, Marine and Ocean Ecosystems Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 265-272.

[102]    D. S. Comsa, L. Lazarescu, and D. Banabic, "Assessing the Formability of Metallic Sheets by Means of Localized and Diffuse Necking Models," in Proceedings of the 19th International Esaform Conference on Material Forming, vol. 1769, F. Chinesta, E. Cueto, and E. AbissetChavanne, Eds. (AIP Conference Proceedings, Melville: Amer Inst Physics, 2016.

[103]    C. Constantinescu, P. C. Muresan, and G. M. Simon, "JackEx: the new digital manufacturing resource for optimization of Exoskeleton-based factory environments," in 26th Cirp Design Conference, vol. 50, L. Wang and T. Kjellberg, Eds. (Procedia CIRP, Amsterdam: Elsevier Science Bv, 2016, pp. 508-511.

[104]    H. Constantinescu, O. Gherman, C. Negrutiu, and S. P. Ioan, "Mechanical Properties of Hardened High Strength Concrete," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 219-226.

[105]    H. Constantinescu, O. Gherman, M. Pastrav, and Sgem, "EXPERIMENTAL STUDY REGARDING DEFLECTION IN SHEAR OF HIGH STRENGTH CONCRETE BEAMS," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 99-104.

[106]    D. Copot, C. Ionescu, I. Nascu, R. de Keyser, and Ieee, "Online weight estimation in a robotic gripper arm," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 151-156.

[107]    D. Copot, A. Maxim, R. De Keyser, C. Ionescu, and Ieee, "Multivariable control of sextuple tank system with non-minimum phase dynamics," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 399-404.

[108]    D. Copot, C. Muresan, R. De Keyser, C. Ionescu, and Ieee, "Fractional order modeling of diffusion processes: a new approach for glucose concentration estimation," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 407-412.

[109]    S. Corde, V. R. Chifu, I. Salomie, E. St Chifu, and A. Iepure, "Bird Mating Optimization Method for One-to-N Skill Matching," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 155-162.

[110]    R. C. Cordos, B. Lucian, Amier, and Academia, "RESEARCH REGARDING ETHICS IN EUROPEAN ORGANIZATIONS IN A TIME OF CRISIS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 313-318.

[111]    B. Coseriu, M. Negru, and S. Nedevschi, "Contrast Restoration of Foggy Images on the ZYNQ Embedded Platform," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 207-214.

[112]    A. D. Costea, S. Nedevschi, and Ieee, "Fast Traffic Scene Segmentation using Multi-range Features from Multi-resolution Filtered and Spatial Context Channels," in 2016 Ieee Intelligent Vehicles Symposium(IEEE Intelligent Vehicles Symposium, New York: Ieee, 2016, pp. 328-334.

[113]    A. D. Costea, S. Nedevschi, and Ieee, "Semantic Channels for Fast Pedestrian Detection," in 2016 Ieee Conference on Computer Vision and Pattern Recognition(IEEE Conference on Computer Vision and Pattern Recognition, New York: Ieee, 2016, pp. 2360-2368.

[114]    C. Costea, L. Neamt, O. Chiver, C. Cola, and V. Sambor, "Distributed processing of data streams on the edge devices," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 1-4.

[115]    C. Costea, A. Petrovan, L. Neamt, and O. Chiver, "On performing semantic queries in small devices," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[116]    A. Cretu, R. Munteanu, D. Iudean, V. Vladareanu, C. Festila, and Ieee, "Markov Analysis of an Induction Motor," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 13-18.

[117]    A. Cretu, R. Munteanu, D. Iudean, V. Vladareanu, P. Karaisas, and Ieee, "Reliability Assessment of Linear Generator Type Wave Energy Converters," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[118]    A. N. Crisan and L. A. Crisan, "APPLIED STUDY ON THE DEVELOPMENT OF COMMUNICATION SKILLS THROUGH THE CASE STUDY METHOD IN TECHNICAL SUBJECTS," in Edulearn16: 8th International Conference on Education and New Learning Technologies, L. G. Chova, A. L. Martinez, and I. C. Torres, Eds. (EDULEARN Proceedings, Valenica: Iated-Int Assoc Technology Education a& Development, 2016, pp. 7675-7680.

[119]    A. N. Crisan and L. A. Crisan, "IMPROVING EVALUATION STRATEGIES IN TECHNICAL DISCIPLINES. A CASE STUDY," in Edulearn16: 8th International Conference on Education and New Learning Technologies, L. G. Chova, A. L. Martinez, and I. C. Torres, Eds. (EDULEARN Proceedings, Valenica: Iated-Int Assoc Technology Education a& Development, 2016, pp. 9028-9033.

[120]    G. C. Crisan, C. M. Pintea, P. Pop, and O. Matei, "An Analysis of the Hardness of Novel TSP Iberian Instances," in Hybrid Artificial Intelligent Systems, vol. 9648, F. MartinezAlvarez, A. Troncoso, H. Quintian, and E. Corchado, Eds. (Lecture Notes in Artificial Intelligence, Berlin: Springer-Verlag Berlin, 2016, pp. 353-364.

[121]    C. Cristea, M. Cristea, I. Birou, Amier, and Academia, "THE EFFECTS OF WORKING CAPITAL MANAGEMENT ON COMPANY PROFITABILITY IN THE ROMANIAN CONSTRUCTION INDUSTRY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 255-260.

[122]    S. Csaba, E. H. Dulf, and Ieee, Mathematical Model Development for Faults Simulation in Current-source PWM Inverters (2016 Ieee 11th International Symposium on Applied Computational Intelligence and Informatics). New York: Ieee, 2016, pp. 203-208.

[123]    L. Czumbil, D. D. Micu, D. Stet, A. Ceclan, and Ieee, A Neural Network Approach for the Inductive Coupling between Overhead Power Lines and Nearby Metallic Pipelines (2016 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee, 2016.

[124]    G. D'Avenio, G. Wang, Y. Li, D. Rafiroiu, G. De Angelis, and M. Grigioni, "PIV and CFD Insight into the Hinge and Near-Hinge Flow Fields of Bileaflet Mechanical Heart Valves," in Xiv Mediterranean Conference on Medical and Biological Engineering and Computing 2016, vol. 57, E. Kyriacou, S. Christofides, and C. S. Pattichis, Eds. (IFMBE Proceedings, New York: Springer, 2016, pp. 688-693.

[125]    C. Damian, R. Tirnovan, P. Dumitru, and M. Osan, "Protection of Encapsulated Medium Voltage Cells Against Electric Arc," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 816-820.

[126]    C. Dan, R. Morar, and I. Destech Publicat, "Determining Insulation Condition of 110kV Instrument Transformers Using Gas Chromatography," in 2016 International Conference on Electrical Engineering and Automation(DEStech Transactions on Engineering and Technology Research, Lancaster: Destech Publications, Inc, 2016.

[127]    C. Dan, R. Morar, and I. Destech Publicat, "Partial Discharge Measurements on 110kV Current Transformers. Case Study. Results," in 2016 International Conference on Electrical Engineering and Automation(DEStech Transactions on Engineering and Technology Research, Lancaster: Destech Publications, Inc, 2016.

[128]    A. D. Danciu, S. I. Gutiu, C. Moga, and Sgem, "BI-DIMENSIONAL ANALYSIS OF A 90 M ARCH WITH DIFFERENT HANGER ARRANGEMENTS," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 477-484.

[129]    R. Danescu, A. Petrovai, R. Itu, and S. Nedevschi, "Generic Obstacle Detection for Mobile Devices Using a Dynamic Intermediate Representation," in Proceedings of the Second International Afro-European Conference for Industrial Advancement, vol. 427, A. Abraham, K. WegrzynWolska, A. E. Hassanien, V. Snasel, and A. M. Alimi, Eds. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 629-639.

[130]    L. Dascalescu, T. Zeghloul, and A. Iuga, Electrostatic Separation of Metals and Plastics From Waste Electrical and Electronic Equipment (Weee Recycling: Research, Development, and Policies). Amsterdam: Elsevier Science Bv, 2016, pp. 75-106.

[131]    R. De Keyser, C. I. Muresan, and Ieee, "Analysis of a new Continuous-to-Discrete-Time Operator for the Approximation of Fractional Order Systems," in 2016 Ieee International Conference on Systems, Man, and Cybernetics(IEEE International Conference on Systems Man and Cybernetics Conference Proceedings, New York: Ieee, 2016, pp. 3211-3216.

[132]    T. Deac, L. Fechete-Tutunaru, and F. Gaspar, "Environmental impact of sawdust briquettes use - experimental approach," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 178-183.

[133]    G. F. Deak, R. Miron, C. C. Avram, A. Astilean, and Ieee, "Fuzzy Based Analysis Method of High-Density Surface Electromyography Maps for Physical Training Assessment," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 335-340.

[134]    C. Deccan and S. Nedevschi, "Stereoscopic Scene Flow estimation with global motion prior," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 199-206.

[135]    R. Demarcsek and L. Todea, "Some of the challenges of teaching multilevel classes and suggestions for how to deal with the situation," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[136]    F. Domnita, C. Muntea, D. Ilutiu-Varvara, T. Rus, D. Beu, and Sgem, "SIMPLIFIED METHODOLOGY FOR EVALUATION THE ENERGY EFFICIENCY OF LED LUMINAIRES," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol I(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 631-638.

[137]    I. Domuta, T. P. Palade, and Ieee, "Adaptive Kalman Filter for Target Tracking in the UWB Networks," in Proceedings of the 2016 13th Workshop on Positioning, Navigation and Communications(Workshop on Positioning Navigation and Communication, New York: Ieee, 2016.

[138]    V. Dorca, S. Popescu, R. Munteanu, A. Chioreanu, C. Peleskei, and Ieee, "Agile Approach with Kanban in Information Security Risk Management," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 19-24.

[139]    P. Dorin, P. Toma, E. Radu, L. Eniko, and Ieee, "Supplying a Renewable Energy Single Phase Microgrid from a Biomass Generator Using a Three Phase Induction Machine," in 2016 10th International Conference on Compatibility, Power Electronics and Power Engineering(Compatibility Power Electronics and Power Engineering, New York: Ieee, 2016, pp. 208-213.

[140]    M. Dragomir, D. Banyai, D. Dragomir, F. Popescu, and A. Criste, "Efficiency and resilience in product design by using morphological charts," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 206-210.

[141]    M. Dragomir, G. Pop, D. Dragomir, Amier, and Academia, "ISO 9001 FROM THE 2008 TO THE 2015 VERSION. UNDERSTANDING THE CHANGES TO GAIN PERSPECTIVE," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 283-289.

[142]    M. A. Dranca, M. M. Radulescu, and Ieee, "Dynamic Behaviour of a Three-Phase Low-Speed Switched Reluctance Micro-Wind Generator," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[143]    R. F. Drenta and G. Lobontiu, "THE CHARACTERISTICS OF INNOVATION AND THE TECHNOLOGICAL DIFFUSION," in Strategica: Opportunities and Risks in the Contemporary Business Environment, C. Bratianu, A. Zbuchea, F. Pinzaru, R. D. Leon, and E. M. Vatamanescu, Eds. (Strategica, Bucharest: Tritonic Publ House, 2016, pp. 575-585.

[144]    P. Dubravka, P. Rafajdus, P. Makys, L. Szabo, and Ieee, Control Techniques for Torque Ripple Minimization in Switched Reluctance Drives under Faults (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 619-626.

[145]    L. I. Dulau, M. Abrudean, and D. Bica, "Optimal Location of a Distributed Generator for Power Losses Improvement," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 734-739.

[146]    L. I. Dulau, M. Abrudean, and D. Bica, "Smart Grid Economic Dispatch," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 740-745.

[147]    M. Dulau and T. M. Dulau, "Multivariable System with Level Control," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 614-622.

[148]    E. H. Dulf, C. I. Muresan, R. Both-Rusu, and F. V. Dulf, "Robust Auto-tuning Fractional Order Control of an Aerodynamical System," in Proceedings of the 2016 International Conference on Mechatronics, Control and Automation Engineering, vol. 58, S. H. Sadeghian, U. Mehta, and P. Rajbongshi, Eds. (AER-Advances in Engineering Research, Paris: Atlantis Press, 2016, pp. 42-45.

[149]    E. H. Dulf, D. Timis, L. C. Iacob, C. I. Muresan, R. Both-Rusu, and Ieee, "Fault Tolerant Distributed Control System with Robust Fractional Order Controllers," in 2016 Ieee International Conference on Systems, Man, and Cybernetics(IEEE International Conference on Systems Man and Cybernetics Conference Proceedings, New York: Ieee, 2016, pp. 2501-2504.

[150]    A. Dziechciarz and C. Martis, Magnetic Equivalent Circuit of Synchronous Reluctance Machine (2016 Elektro 11th International Conference). Zilina: Univ Zilina, Fac Electrical Engineering, 2016, pp. 500-503.

[151]    A. Dziechciarz, C. Oprea, C. Martis, and Ieee, "Multi-Physics Design of Synchronous Reluctance Machine for High Speed Applications," in Proceedings of the Iecon 2016 - 42nd Annual Conference of the Ieee Industrial Electronics Society(IEEE Industrial Electronics Society, New York: Ieee, 2016, pp. 1704-1709.

[152]    S. Emerich, E. Lupu, B. Belean, and S. Crisan, "Image Analysis and Coding Based on Ordinal Data Representation," in Image Feature Detectors and Descriptors: Foundations and Applications, vol. 630, A. I. Awad and M. Hassaballah, Eds. (Studies in Computational Intelligence, Berlin: Springer-Verlag Berlin, 2016, pp. 281-303.

[153]    S. Emerich, R. Malutan, E. Lupu, and L. Lefkovits, "Patch Based Descriptors for Iris Recognition," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 187-191.

[154]    S. Enyedi, J. Stefan, L. Miclea, I. Stoian, D. Capatina, and Ieee, "Connected Visualization Service in a Water Management System," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 125-129.

[155]    Z. Erdei, M. Horgos, A. Grib, D. M. Preradovic, and V. Rodic, "MCCB warm adjustment testing concept," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[156]    A. Fanca, A. Puscasiu, and H. Valean, "Accident Reporting and Guidance System with automatic detection of the accident," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 150-155.

[157]    P. Farago, M. Cirlugea, and S. Hintea, An Electronically Programmable Current Balancing Instrumentation Amplifier for Biomedical Monitoring (2016 39th International Conference on Telecommunications and Signal Processing). New York: Ieee, 2016, pp. 269-273.

[158]    D. Farcas, Amier, and Academia, "ABOUT COMPETITION, COMPETITIVE ADVANTAGE AND CRITICAL SUCCESS FACTORS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 421-426.

[159]    R. Farcas, S. Nas, A. Porutiu, and Sgem, "GENERAL CONSIDERATIONS REGARDING THE HYDROSTATIC SITUATION IN THE AREA SURROUNDING A BRINE LAKE," in Water Resources, Forest, Marine and Ocean Ecosystems Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 149-156.

[160]    R. Fat, L. Mic, A. O. Kilyen, M. M. Santa, T. S. Letia, and Ieee, "Model and Method for the Stock Market Forecast," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 329-333.

[161]    A. Faur and A. Puskas, SIMPLIFICATIONS FOR CONSIDERING THE CONTRIBUTION OF THE REINFORCEMENT IN THE COMPRESSION ZONE FOR DESIGNING MORE EFFICIENT RC FRAME ELEMENTS (Ii International Conference on Concrete Sustainability - Iccs16). 08034 Barcelona: Int Center Numerical Methods Engineering, 2016, pp. 1387-1398.

[162]    C. Feniser, G. Burz, Amier, and Academia, "THE CAUSES OF REDUCED INNOVATION IN ROMANIA: EXTRACTIVE INSTITUTIONS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 327-338.

[163]    C. Festila, R. Rusu-Both, E. H. Dulf, M. Secara, and Ieee, The Linear and Nonlinear Behavior Analysis for RC-Filters (2016 Ieee 11th International Symposium on Applied Computational Intelligence and Informatics). New York: Ieee, 2016, pp. 365-370.

[164]    D. S. Filip, D. Petreus, and Ieee, "Simulation of an inductive coupled power transfer system," in Proceedings of the Iecon 2016 - 42nd Annual Conference of the Ieee Industrial Electronics Society(IEEE Industrial Electronics Society, New York: Ieee, 2016, pp. 4553-4558.

[165]    A. Fodor, G. Chindris, D. Pitica, and Ieee, Enhancing Thermal Capabilities of Component Packaging (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 142-145.

[166]    A. Fodor, G. Chindris, D. Pitica, and R. Jano, "Task allocation for thermal optimization in multicore systems," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 349-352.

[167]    F. Fodor, C. Brisan, V. Chiroiu, and Ieee, "The Development of a Pneumatically Actuated Driving Simulator," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 185-190.

[168]    D. Fodorean, C. Husar, C. Irimia, and Ieee, Noise and Vibration Behavior Evaluation of DC Motor and PMSM in Electric Traction Application (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 1184-1189.

[169]    D. Fodorean and L. Idoumghar, "Hybrid Optimization Design of a High-Speed Permanent Magnet Machine Used for EV Traction," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 245-250.

[170]    D. Fodorean, M. M. Sarrazin, C. S. Martis, J. Anthonis, and H. Van der Auweraer, "Electromagnetic and Structural Analysis for a Surface-Mounted PMSM Used for Light-EV," Ieee Transactions on Industry Applications, vol. 52, no. 4, pp. 2892-2899, Jul-Aug 2016.

[171]    A. Fratean, P. Dobra, M. Rad, and Ieee, "Demand scheduling and predictive control opportunities for local energy production arbitrage Smart buildings applications as a component of smart cities," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 91-96.

[172]    A. Fratean, P. Dobra, and F. Simonca, "The opportunity of energy arbitrage by using predictive control in a solar passive house," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 596-601.

[173]    R. Frohlich et al., "Region Based Fusion of 3D and 2D Visual Data for Cultural Heritage Objects," in 2016 23rd International Conference on Pattern Recognition(International Conference on Pattern Recognition, Los Alamitos: Ieee Computer Soc, 2016, pp. 2404-2409.

[174]    T. Gabor, V. Dan, A. E. Tiuc, I. M. Sur, and I. N. Badila, "MODELLING AND SIMULATION OF HEAT TRANSFER PROCESSES FOR HEAT EXCHANGERS USED IN WASTEWATER TREATMENT," Environmental Engineering and Management Journal, vol. 15, no. 5, pp. 1027-1033, May 2016.

[175]    R. Galatus and J. Valles, "Optimized Design of High-Order Series Coupler Yb3+/Er3+-Codoped Phosphate Glass Microring Resonator Filters," in Optical Modelling and Design Iv, vol. 9889, F. Wyrowski, J. T. Sheridan, and Y. Meuret, Eds. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2016.

[176]    F. Gaspar, T. Deac, L. V. F. Tutunaru, and D. Moldovanu, "Experimental study on the sun tracking ability of a spherical solar collector," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 220-227.

[177]    I. Gavrea and M. Ivan, "On the Asymptotic Behavior of Sequences of Positive Linear Approximation Operators," in Mathematical Analysis, Approximation Theory and Their Applications, vol. 111, T. M. Rassias and V. Gupta, Eds. (Springer Optimization and Its Applications, Cham: Springer Int Publishing Ag, 2016, pp. 267-280.

[178]    V. A. Gavrilas, L. O. Marian, Amier, and Academia, "COMPARATIVE STUDY OF THE MARKETING METHODS USED BY THE MAIN MEDICINE DISTRIBUTORS FROM ROMANIA," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 269-275.

[179]    O. Gavris, L. Anastasiu, S. Ciplea, S. Hopirtean, Amier, and Academia, "E-LEARNING - A mETHOD TO REDUCE THE IMPACT OF CRISIS IN HIGHER EDUCATION," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 471-+.

[180]    B. Genge, P. Haller, A. Beres, H. Sandor, and I. Kiss, Using Software-Defined Networking to Mitigate Cyberattacks in Industrial Control Systems (Securing Cyber-Physical Systems). Boca Raton: Crc Press-Taylor & Francis Group, 2016, pp. 305-329.

[181]    B. Gherman, D. Pisla, G. Kacso, and N. Plitea, "Kinematic Behaviour of a Novel Medical Parallel Robot for Needle Placement," in Advances in Robot Design and Intelligent Control, vol. 371, T. Borangiu, Ed. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 329-338.

[182]    O. E. Gherman, H. Constantinescu, M. C. Gherman, and Sgem, "MECHANICAL PROPERTIES OF HIGH STRENGTH STEEL FIBER REINFORCED CONCRETE," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 629-636.

[183]    M. Ghindea, A. Catarig, and R. Ballok, Numerical Analysis of Beam-To-Column Connections Behavior (Modern Technologies for the 3rd Millennium). 40128 Bologna: Medimond S R L, 2016, pp. 105-110.

[184]    I. Giurca, I. Aschilean, G. S. Naghiu, and G. Badea, "Selecting the Technical Solutions for Thermal and Energy Rehabilitation and Modernization of Buildings," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 789-796.

[185]    C. Giurgea, F. Bode, L. Nascutiu, and C. Dudescu, "Considerations regarding the optically transparent rigid model for PIV investigations. A case study. Part 2: Notes on the failure of the model," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 235-243.

[186]    A. M. Giurgiu, I. Manciu, and I. Lese, "Technological Development - a Tool for Social and Economic Impact of the Chamber of Commerce and Industry of Mures County," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 1092-1099.

[187]    A. M. Giurgiu, L. O. Marian, I. Manciu, I. M. Lese, Amier, and Academia, "EUROPEAN PROJECTS- THE CHAMBER OF COMMERCE RESPONSE IN A TIME OF CRISIS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 82-90.

[188]    O. Giurgiu, A. Plesa, and L. Socaciu, "Plate heat exchangers - flow analysis through mini channels," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 244-251.

[189]    M. Gologanu, D. S. Comsa, A. Kami, and D. Banabic, "Modelling the Voids Growth in Ductile Fracture," in Multiscale Modelling in Sheet Metal Forming, D. Banabic, Ed. (ESAFORM Bookseries on Material Forming, Cham: Springer International Publishing Ag, 2016, pp. 135-203.

[190]    M. Gologanu, A. Kami, D. S. Comsa, and D. Banabic, "Calibration of Gurson-type models for porous sheet metals with anisotropic non-quadratic plasticity," in Numisheet 2016: 10th International Conference and Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes, Pts a and B, vol. 734, R. P. R. Cardoso, J. W. Yoon, R. E. Dick, E. S. Neto, J. DeSa, and O. B. Adetoro, Eds. (Journal of Physics Conference Series, Bristol: Iop Publishing Ltd, 2016.

[191]    M. Gordan et al., "A Fuzzy Logic Approach for the Fast Approximate Computation of Image Transforms from Block JPEG DCT Coefficients," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 359-364.

[192]    A. Goron and C. I. Chesnevar, HLMC: a Hybrid Logic Tool for Model Checking in Verification of Administrative Processes (9th International Conference on Theory and Practice of Electronic Governance). New York: Assoc Computing Machinery, 2016, pp. 376-377.

[193]    A. T. Grajdeanu, C. Raducan, C. S. Plesa, B. S. Kirei, M. Neag, and Ieee, Comparison of Four Design Environments Employed to Analyze a Switched-Capacitor DC-DC Converter (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 190-193.

[194]    A. Grama, M. Dan, E. Lazar, and Ieee, "Photovoltaic Panel Model Using Matlab," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 322-327.

[195]    V. T. Grosu, E. F. Grosu, and T. Dobrescu, "GENERAL AND HAND-EYES COORDONATION IN MENTAL TRAINING OF ALPINE SKIERS," in Elearning Vision 2020!, Vol Iii, I. Roceanu et al., Eds. (eLearning and Software for Education, Bucharest: Carol I Natl Defence Univ Publishing House, 2016, pp. 361-369.

[196]    V. T. Grosu, E. F. Grosu, and C. E. Moraru, "Motor Coordination and Reactivity Influenced by Mental Training in Alpine Skiing," in Wlc 2016: World Lumen Congress. Logos Universality Mentality Education Novelty 2016, vol. 15, A. Sandu, T. Ciulei, and A. Frunza, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2016, pp. 436-443.

[197]    A. Groza and M. M. Nagy, "Harmonization of conflicting medical opinions using argumentation protocols and textual entailment - a case study on Parkinson disease," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 163-170.

[198]    A. Groza and O. M. Popa, "Mining Arguments from Cancer Documents Using Natural Language Processing and Ontologies," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 77-84.

[199]    R. Groza, M. Cirlugea, and Ieee, Current-mode Configurable Analog Block (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 177-+.

[200]    K. Guelton, S. S. Ge, A. Sala, B. Grabot, and Z. Lendek, "4th IFAC Conference on Intelligent Control and Automation SciencesICONS 2016 Reims, France, 1-3 June 2016," Ifac Papersonline, vol. 49, no. 5, p. 1, 2016.

[201]    S. I. Gutiu, C. Moga, A. D. Danciu, and Sgem, "ELASTIC AND PLASTIC DESIGN OF COMPOSITE STEEL-CONCRETE GIRDERS WITH CIRCULAR HOLES," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 549-556.

[202]    S. I. Gutiu, C. Moga, A. D. Danciu, M. Suciu, and Sgem, "CONSTRUCTIVE SOLUTIONS FOR MEDIUM SPAN FOOTBRIDGES," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 517-524.

[203]    S. I. Gutiu, P. Moga, C. Moga, and A. D. Danciu, "The new arch bridge in the city of Sibiu, Romania," in Bridges in Danube Basin 2016 - New Trends in Bridge Engineering and Efficient Solution for Large and Medium Span Bridges, vol. 156, J. Bujnak and J. Vican, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 132-139.

[204]    T. Gyorgy, K. A. Biro, and Ieee, Co-Evolutionary Optimization Design of a Three-Phase Induction Machine with External Rotor (2016 Xxii International Conference on Electrical Machines). New York: Ieee, 2016, pp. 1394-1398.

[205]    G. Harja, G. Vlad, J. Nascu, and Ieee, "MPC advanced control of dissolved oxygen in an activated sludge wastewater treatment plant," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 269-274.

[206]    O. L. Hasna and R. Potolea, The Longest Common Subsequence Distance using a Complexity Factor (Kdir: Proceedings of the 8th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management - Vol. 1). Setubal: Scitepress, 2016, pp. 336-343.

[207]    S. Herle and Ieee, "Design of a reference signal generator for an upper limb prosthesis myoelectric controller," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 179-184.

[208]    N. I. Hodasz, V. I. Bradila, I. Nascu, Z. Lendek, and Ieee, "Modeling and parameter estimation for an activated sludge wastewater treatment process," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 309-314.

[209]    V. Hodor, D. Birle, L. Nascutiu, and M. Diudea, "CFD prediction with LES for psycho acoustic relevance in ventilation," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 252-259.

[210]    A. Holzinger, M. Plass, K. Holzinger, G. C. Crisan, C. M. Pintea, and V. Palade, "Towards interactive Machine Learning (iML): Applying Ant Colony Algorithms to Solve the Traveling Salesman Problem with the Human-in-the-Loop Approach," in Availability, Reliability, and Security in Information Systems, Cd-Ares 2016, Paml 2016, vol. 9817, F. Buccafurri, A. Holzinger, P. Kieseberg, A. M. Tjoa, and E. Weippl, Eds. (Lecture Notes in Computer Science, Cham: Springer Int Publishing Ag, 2016, pp. 81-95.

[211]    M. Hulea, R. Miron, T. Letia, and Ieee, "Modular Hybrid Control System with Petri-Nets Enhanced Components for Hydro Power Plant Control," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 299-303.

[212]    A. Ianosi, A. Dimitrova, S. Noveanu, O. M. Tatar, and D. S. Mandru, "Shoulder-elbow exoskeleton as rehabilitation exerciser," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[213]    A. Ianosi-Andreeva-Dimitrova, D. S. Mandru, S. Noveanu, and M. O. Tatar, "A Brain-Computer Interface for the Control of a Finger Rehabilitation Glove," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 344-347.

[214]    E. Iatan, M. Iliescu, F. Bode, I. Nastase, R. M. Damian, and M. Sandu, "Numerical study for open-channel flow over rows of hemispheres," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 260-265.

[215]    S. Igor, M. Secara, C. Festila, and Ieee, "Algorithms and Control Structures for Industrial Robots TX90 Model," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 203-206.

[216]    I. Ilea, L. Bombrun, C. Germain, Y. Berthoumieu, and Ieee, TEXTURE IMAGE CLASSIFICATION WITH RIEMANNIAN FISHER VECTORS ISSUED FROM A LAPLACIAN MODEL (2016 Ieee 12th Image, Video, and Multidimensional Signal Processing Workshop). New York: Ieee, 2016.

[217]    I. Ilea et al., "TEXTURE IMAGE CLASSIFICATION WITH RIEMANNIAN FISHER VECTORS," in 2016 Ieee International Conference on Image Processing(IEEE International Conference on Image Processing ICIP, New York: Ieee, 2016, pp. 3543-3547.

[218]    I. Ilea et al., "An M-estimator for robust centroid estimation on the manifold of covariance matrices: performance analysis and application to image classification," in 2016 24th European Signal Processing Conference(European Signal Processing Conference, New York: Ieee, 2016, pp. 2196-2200.

[219]    A. I. Ilies, R. Jano, G. Chindris, and Ieee, "Thermal Management of System-on-Chip Devices Used in Satellite Systems under Low Temperature Conditions," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 91-96.

[220]    N. M. Ilies, V. S. Farcas, R. V. Cot, and I. M. Moldovan, "The Control of Natural Disaster Caused by Slopes Sliding by Means of Stepped Buildings," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 391-398.

[221]    D. A. Ilutiu-Varvara, "An Assessment of Pollution with Polychlorinated Dibenzodioxins (PCDDs) and Polychlorinated Dibenzofuranes (PCDFs) at Steelmaking," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 445-451.

[222]    D. A. Ilutiu-Varvara et al., "An Assessment of Pollution with Volatile Organic Compounds in the Electric Arc Furnaces," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 452-456.

[223]    I. Indre and C. Lemnaru, "Detection and Prevention System against Cyber Attacks and Botnet Malware for Information Systems and Internet of Things," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 175-182.

[224]    R. A. Inte and F. N. Jurca, "A Novel Synchronous Reluctance Motor with Outer Rotor for an Electric Bike," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 213-218.

[225]    C. M. Ionescu et al., "Robust Autotuning MPC for a class of process control applications," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 369-374.

[226]    C. M. Ionescu, C. I. Muresan, D. Copot, and R. De Keyser, "Constrained Multivariable Predictive Control of a Train of Cryogenic C-13 Separation Columns," Ifac Papersonline, vol. 49, no. 7, pp. 1103-1108, 2016.

[227]    A. Iosub et al., Distribution fitting Approach to Application Fitness Assessment (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 11-+.

[228]    V. C. Iuhos and C. M. Campian, "Specific Issues on the Design and Expertise of Steel Columns for Overhead Lines," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 115-121.

[229]    I. A. Ivanciu, E. F. Luchian, V. Dobrota, E. Riviere, and Ieee, "OpenStack-based Clouds as Holons: A Functional Perspective," in 2016 22nd Ieee International Symposium on Local and Metropolitan Area Networks(IEEE International Workshop on Local and Metropolitan Area Networks, New York: Ieee, 2016.

[230]    C. I. Iviuresan, I. R. Birs, S. Folea, E. H. Dulf, O. Prodan, and Ieee, "Experimental Results of a Fractional Order PD lambda Controller for Vibration Suppresion," in 2016 14th International Conference on Control, Automation, Robotics and Vision(International Conference on Control Automation Robotics and Vision, New York: Ieee, 2016.

[231]    R. Jano, A. Fodor, A. I. Ilies, and Ieee, "Simulation and Educational Tool for Fault Modelling in Logic Circuits," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 476-479.

[232]    L. Jantschi, S. D. Bolboaca, and D. Janezic, Cyclic Carbon Polyynes (Distance, Symmetry, and Topology in Carbon Nanomaterials). Dordrecht: Springer, 2016, pp. 423-436.

[233]    C. Jora and C. Chira, "Evolutionary Community Detection in Complex and Dynamic Networks," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 127-134.

[234]    F. N. Jurca, M. Ruba, C. Martis, and Ieee, Design and Control of Synchronous Reluctances Motors for Electric Traction Vehicle (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 1144-1148.

[235]    P. Kapalo, F. Domnita, L. Meciarova, and Sgem, "EXAMINING THE IMPACT OF INDOOR AIR ON OFFICE ROOMS OCCUPANTS - CASE STUDY," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 367-372.

[236]    J. Kessler, N. Bale, A. Gebhardt, and K. Abbas, "Basic Research on Lattice Structures Focused on the strut shape and welding beads," in Laser Assisted Net Shape Engineering 9 International Conference on Photonic Technologies Proceedings of the Lane 2016, vol. 83, M. Schmidt, F. Vollertsen, and C. B. Arnold, Eds. (Physics Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 833-838.

[237]    B. S. Kirei, M. Topa, S. Hintea, and Ieee, A General Procedure for Datapath and Control Design and Its Description in SystemVerilog (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 129-132.

[238]    S. A. Kollo, G. Kollo, and A. Puskas, "Nexus of the Load Bearing Capacity of Rails and the Stiffness of the Optimized Sleepers," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 312-318.

[239]    S. A. Kollo, G. Kollo, and A. Puskas, THE OPTIMIZATION OF RAILWAY CONCRETE SLEEPERS FOR INCREASING OF DURABILITY AND SUSTAINABILITY (Ii International Conference on Concrete Sustainability - Iccs16). 08034 Barcelona: Int Center Numerical Methods Engineering, 2016, pp. 156-167.

[240]    S. A. Kollo, A. Puskas, G. Kollo, and Sgem, "THE RAIL SECTOR REPRESENTS A REVOLUTION IN 21ST CENTURY GREEN TRANSPORTATION," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 195-201.

[241]    I. Kovacs, A. Iosub, M. Topa, A. Buzo, G. Pelz, and Ieee, A Novel Entropy-Based Sensitivity Analysis Approach for Complex Systems (Proceedings of 2016 Ieee Symposium Series on Computational Intelligence). New York: Ieee, 2016.

[242]    S. Kula, S. Cosman, and Ieee, Switched Reluctance Motor Model Implemented on PXI FPGA Target (2016 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee, 2016.

[243]    A. A. Laczko, S. Brisset, M. M. Radulescu, and Ieee, Modeling approaches to brushless DC permanent-magnet generator for use in micro-wind turbine applications (2016 Xxii International Conference on Electrical Machines). New York: Ieee, 2016, pp. 445-451.

[244]    C. C. Lang, S. Brad, Amier, and Academia, "THE PRESSURE OF ECONOMIC CRISES UPON THE NECESSITY OF REDEFINING THE LABOUR PRODUCTIVITY INDICATOR," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 339-346.

[245]    S. Lange, L. Tachiciu, I. C. Pirnea, and A. Maier, "A CASE STUDY ON EFFECTIVENESS OF ORGANISATIONAL STRUCTURES UNDER THE EFFECT OF GLOBALIZATION," in Basiq International Conference: New Trends in Sustainable Business and Consumption 2016, R. Pamfilie, V. Dinu, L. Tachiciu, D. Plesea, and C. Vasiliu, Eds. (Proceedings of BASIQ, Bucuresti: Editura Ase, 2016, pp. 167-174.

[246]    C. Lapusan, R. Balan, O. Hancu, and A. Plesa, "Development of a Multi-Room Building Thermodynamic Model Using Simscape Library," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 320-328.

[247]    C. Lapusan, O. Hancu, C. Rad, L. Dache, V. Maties, and Ieee, "Integrated learning platform based on Lego NXT and Matlab for teaching mechatronics," in 2016 8th International Conference on Electronics, Computers and Artificial Intelligence(International Conference on Electronics Computers and Artificial Intelligence, New York: Ieee, 2016.

[248]    I. L. Lapusan and M. Arghir, "Study on mechanics of bodies under the action of sound pollution in industrial halls. Part I: Setting away from local sources," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[249]    T. S. Latinovic, D. M. Preradovic, C. R. Barz, M. T. Latinovic, P. P. Petrica, and A. Pop-Vadean, "Big Data in industry," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[250]    G. I. Latiu, O. A. Cret, and L. Vacariu, "Automated Graphical User Interface Testing Framework-Evoguitest-Based on Evolutionary Algorithms," in Computational Intelligence, Ijcci 2013, vol. 613, K. Madani, A. Dourado, A. Rosa, J. Filipe, and J. Kacprzyk, Eds. (Studies in Computational Intelligence, Berlin: Springer-Verlag Berlin, 2016, pp. 39-63.

[251]    E. Lazar, D. Petreus, R. Etz, T. Patarau, and Ieee, "Optimal Scheduling of an Islanded Microgrid Based on Minimum Cost," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 290-295.

[252]    Z. Lendek and J. Lauber, "Local stability of discrete-time TS fuzzy systems," Ifac Papersonline, vol. 49, no. 5, pp. 7-12, 2016.

[253]    Z. Lendek, J. Lauber, and Ieee, "Local quadratic and nonquadratic stabilization of discrete-time TS fuzzy systems," in 2016 Ieee International Conference on Fuzzy Systems(IEEE International Fuzzy Systems Conference Proceedings, New York: Ieee, 2016, pp. 2182-2187.

[254]    S. Leptidis, D. G. Papageorgiou, C. Medrea, and I. Chicinas, "Failure analysis of an EDM machined mold-printing die used for the production of truck spare parts," Engineering Failure Analysis, vol. 61, pp. 62-68, Mar 2016.

[255]    I. A. Letia and A. Goron, "Verifying Compliance for Business Process Logs with a Hybrid Logic Model Checker," in Combinations of Intelligent Methods and Applications, vol. 46, I. Hatzilygeroudis, V. Palade, and J. Prentzas, Eds. (Smart Innovation Systems and Technologies, Berlin: Springer-Verlag Berlin, 2016, pp. 61-78.

[256]    T. S. Letia and A. O. Kilyen, "Method for Approaching the Cyber-Physical Systems," in Proceedings of the 2016 Federated Conference on Computer Science and Information Systems, vol. 8, M. Ganzha, L. Maciaszek, and M. Paprzycki, Eds. (ACSIS-Annals of Computer Science and Information Systems, New York: Ieee, 2016, pp. 757-766.

[257]    T. S. Letia, A. O. Kilyen, and Ieee, "Fuzzy Logic Enhanced Time Petri Net Models for Hybrid Control Systems," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 227-232.

[258]    C. Liu et al., "FPGA based Real-time Simulation of High Frequency Soft-switching Circuit using Time-domain Analysis," in Proceedings of the Iecon 2016 - 42nd Annual Conference of the Ieee Industrial Electronics Society(IEEE Industrial Electronics Society, New York: Ieee, 2016, pp. 5832-5837.

[259]    E. Luchian, P. Docolin, V. Dobrota, and Ieee, Advanced Monitoring of the OpenStack NFV Infrastructure: A Nagios Approach Using SNMP (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 51-54.

[260]    E. Luchian, C. Filip, A. B. Rus, I. A. Ivanciu, V. Dobrota, and Ieee, Automation of the Infrastructure and Services for an OpenStack Deployment Using Chef Tool (2016 15th Roedunet Conference - Networking in Education and Research). New York: Ieee, 2016.

[261]    S. Lukacs, A. Colesa, G. Sebestyen, and Ieee, "BITMIX: A Hardware Accelerated Randomized Symmetric Encryption Method," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 37-42.

[262]    C. Lung, S. Sabou, A. Buchman, and Ieee, Wireless sensor networks as part of emergency situations management system (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 240-243.

[263]    N. Lungu, S. A. Ciplea, Amier, and Academia, "A NEW MODEL FOR PRICE FLUCTUATION IN A SINGLE COMMODITY MARKET USING MATHEMATICAL THEORY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 172-178.

[264]    R. Lungu, F. Lungu, Amier, and Academia, "CRISIS MANAGEMENT FROM THE SPIRITUAL OUTLOOK OF THE THREE MAJOR WORLD RELIGIONS. ARE THERE ANY PRACTICAL LESSONS TO BE LEARNED?," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 427-434.

[265]    F. L. Lupaescu, I. A. Ivanciu, E. Luchian, V. Dobrota, and Ieee, A Firewall Application for Performance Evaluation of the Pyretic Controller in Software-Defined Networks (2016 15th Roedunet Conference - Networking in Education and Research). New York: Ieee, 2016.

[266]    L. M. Lupan, D. L. Manea, and L. M. Moga, "Improving Thermal Performance of the Wall Panels Using Slotted Steel Stud Framing," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 351-357.

[267]    D. Lutas, A. Colesa, S. Lukacs, and A. Lutas, "Secure Virtual Machine for Real Time Forensic Tools on Commodity Workstations," in Innovative Security Solutions for Information Technology and Communications, vol. 10006, I. Bica and R. Reyhanitabar, Eds. (Lecture Notes in Computer Science, Cham: Springer Int Publishing Ag, 2016, pp. 193-208.

[268]    C. L. Madalin, M. Calin, and P. Marius, "Numerical Simulations of the Electromagnetic Field Shielding Performances for Reducing the Induced Faults in the Coils of a Three-Phase Miniature Circuit Breaker," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 97-101.

[269]    C. L. Madalin, M. Calin, and P. I. Marius, "Induced Fault Current Simulation of a Three Phase Miniature Circuit Breaker Simulation of fault and comparison to tripping curve of the MCB," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 92-96.

[270]    D. Maier, M. Maftei, T. Keppler, and A. Maier, Study on the Organizational Resistance to Innovation (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 3611-+.

[271]    D. Maier, M. Olaru, A. Maier, and T. Eidenmuller, Importance of Innovation in the Context of Changes Arising from Economic Globalization (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 3102-+.

[272]    V. Maier, S. G. Pavel, H. G. Beleiu, I. Birou, and V. Farcas, "Nomograms for Sizing the Vertical Earth Grounding," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 483-486.

[273]    V. Maier, S. G. Pavel, H. G. Beleiu, C. Buda, and Ieee, Survey Regarding Additional Indicators for Voltage Sags (2016 13th International Conference on Development and Application Systems). New York: Ieee, 2016, pp. 103-107.

[274]    V. Maier, S. G. Pavel, H. G. Beleiu, and V. Farcas, "Additional Indicators for Short Time Overvoltages and Voltage Impulses," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 827-831.

[275]    R. Malutan, R. Terebes, M. Cislariu, C. Germain, I. Ilea, and Ieee, ICA Based PolSAR Image Denoising (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 349-352.

[276]    I. Manciu, L. O. Marian, A. M. Redes, I. M. Lese, Amier, and Academia, "GROUNDING DECISIONS IN TIME OF CRISIS - Case studies on SMEs," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 74-81.

[277]    S. Mandici, S. Nedevschi, and Ieee, Real-Time Multi-Resolution Digital Elevation Map Creation using the Sensor Model of a Stereovision Sensor (2016 Ieee 19th International Conference on Intelligent Transportation Systems). New York: Ieee, 2016, pp. 608-615.

[278]    R. Manescu, "Heat Exchanger Versus Storage Tank for Hot Tap Water Preparation in District Heating Systems," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 720-725.

[279]    R. Manescu and V. Sita, "Heating efficiency with multiple boilers. Case study for single, two and three boiler operation," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 79-83.

[280]    A. Marcel et al., "Thermal Aware Workload Consolidation in Cloud Data Centers," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 377-384.

[281]    A. N. Marginean and K. Eniko, "Towards Lexicalization of DBpedia Ontology with Unsupervised Learning and Semantic Role Labeling," in Proceedings of 2016 18th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, J. Davenport et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 256-263.

[282]    A. Marginean, A. Petrovai, R. R. Slavescu, M. Negru, and S. Nedevschi, "Enhancing Digital Maps to Support Reasoning on Traffic Sign Compliance," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 277-284.

[283]    R. Martis, R. Siecoban, C. Martis, L. Szabo, and Ieee, Common and Normal Mode Currents in PMSM PWM Drives (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 494-498.

[284]    R. Martis, R. Siecoban, L. Szabo, and C. Martis, "Vibro-Acoustic Behavior vs. Conductive Interferences in PMSM drives," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 326-330.

[285]    O. Matei and D. Contras, "Automated Product Design and Development Using Evolutionary Ontology," in Artificial Intelligence Perspectives in Intelligent Systems, Vol 1, vol. 464, R. Silhavy, R. Senkerik, Z. K. Oplatkova, P. Silhavy, and Z. Prokopova, Eds. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 47-57.

[286]    O. Matei, G. Di Orio, J. Jassbi, J. Barata, and C. Cenedese, "Collaborative Data Mining for Intelligent Home Appliances," in Collaboration in a Hyperconnected World, vol. 480, H. Afsarmanesh, L. M. CamarinhaMatos, and A. L. Soares, Eds. (IFIP Advances in Information and Communication Technology, Berlin: Springer-Verlag Berlin, 2016, pp. 313-323.

[287]    K. Mathe et al., "Vision-based Control of a Quadrotor for an Object Inspection Scenario," in 2016 International Conference on Unmanned Aircraft Systems(International Conference on Unmanned Aircraft Systems, New York: Ieee, 2016, pp. 849-857.

[288]    V. Maties, "The National Mechatronic Platform. The basis of the educational programs in the knowledge society," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[289]    N. Medan and M. Banica, "Taguchi versus Full Factorial Design to Determine the Influence of Process Parameters on the Impact Forces Produced by Water Jets Used in Sewer Cleaning," in 20th Innovative Manufacturing Engineering and Energy Conference, vol. 161, S. Maropoulos, P. Kyratsis, K. Kakoulis, N. Taousanidis, G. Oancea, and O. Dodun, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[290]    V. V. Merie, C. Birleanu, M. S. Pustan, G. Negrea, and I. M. Pintea, "Analysis on temperature effect on the mechanical and tribological properties of titanium nitride thin films," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[291]    V. V. Merie, G. Negrea, and E. Modi, "The influence of substrate temperature on the tribo-mechanical properties of chromium nitride thin films," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[292]    A. D. Mezei and L. Tamas, "Active Perception for Object Manipulation," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 269-274.

[293]    A. Miclaus, R. Jano, G. Chindris, and Ieee, "Implementation of a Car Model for Indirect Tire Pressure Monitoring System," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 316-321.

[294]    V. C. Miclea and S. Nedevschi, "Optimizing Census-based Semi Global Matching by Genetic Algorithms," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 193-198.

[295]    D. D. Micu et al., "On a Demand Response Pilot Demonstration in the Technical University of Cluj-Napoca," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 785-791.

[296]    D. Micu, T. Micu, and Ieee, The Potential of a Punctual Charge in the Presence of two Conductive Surfaces (2016 International Symposium on Fundamentals of Electrical Engineering). New York: Ieee, 2016.

[297]    G. Mihai, A. M. Aron, V. Haralambie, A. Paljanos, and Ieee, A Study of Mobile Phone SAR Levels Modification in Different Experimental Configurations under 2G and 3G Communication Standards (2016 International Conference on Communications). New York: Ieee, 2016, pp. 491-494.

[298]    A. M. Mihu, I. M. Sas-Boca, I. Marian, D. A. Ilutiu-Varvara, and L. Nistor, "The Influence of Process Parameters on Non-Conventional Technology in Drawing Cassette Roller Die (Part 1)," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 28-33.

[299]    A. M. Mihu et al., "Finite Element Analysis of Drawing Wire in Cassette Roller Die (Part 2)," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 34-39.

[300]    C. Militaru, A. D. Mezei, L. Tamas, and Ieee, "Object Handling in Cluttered Indoor Environment with a Mobile Manipulator," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 487-492.

[301]    A. T. Mircea, Study upon Applying Multi-Criteria Analysis to the Selection of Building Materials (Vision 2020: Innovation Management, Development Sustainability, and Competitive Economic Growth, 2016, Vols I - Vii). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 1354-1360.

[302]    C. G. R. Mircea, A. Faur, A. Harcsa, M. Mulea, and C. Baera, Cyclic response of large lightly reinforced concrete walls made of plain and fibre concrete (Concrete Solutions). Boca Raton: Crc Press-Taylor & Francis Group, 2016, pp. 539-546.

[303]    A. Miron, A. Cziker, M. Chindris, D. Sacerdotianu, and Ieee, "Impact of distributed generation on weak distribution networks. Study case on a Romanian microgrid," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[304]    B. Mocan, V. V. Bintintan, S. Brad, C. Ciuce, M. Mocan, and M. Murar, "Development of a Robotic Driven Handheld Laparoscopic Instrument for Non-invasive Intraoperative Detection of Small Endoluminal Digestive Tumors," in New Trends in Medical and Service Robots: Human Centered Analysis, Control and Design, vol. 39, P. Wenger, C. Chevallereau, D. Pisla, H. Bleuler, and A. Rodic, Eds. (Mechanisms and Machine Science, Berlin: Springer-Verlag Berlin, 2016, pp. 197-210.

[305]    B. Mocan, M. Fulea, and S. Brad, "Designing a Multimodal Human-Robot Interaction Interface for an Industrial Robot," in Advances in Robot Design and Intelligent Control, vol. 371, T. Borangiu, Ed. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 255-263.

[306]    C. Moga, S. I. Gutiu, A. D. Danciu, M. Suciu, and Sgem, "CONCRETE SHRINKAGE STRESSES AND THERMAL EFFECTS IN THE COMPOSITE GIRDERS ACCORDING TO EUROCODES," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 501-508.

[307]    D. Moga, D. Petreus, V. Muresan, N. Stroia, and G. Cosovici, "Optimal generation scheduling in islanded microgrids," Ifac Papersonline, vol. 49, no. 27, pp. 135-139, 2016.

[308]    D. Moga, D. Petreus, N. Stroia, and Ieee, "Web based solution for remote monitoring of an islanded microgrid," in Proceedings of the Iecon 2016 - 42nd Annual Conference of the Ieee Industrial Electronics Society(IEEE Industrial Electronics Society, New York: Ieee, 2016, pp. 4258-4262.

[309]    P. Moga, S. I. Gutiu, F. Anghel, C. Moga, and A. D. Danciu, "Footbridge over the Some River in Cluj-Napoca, Romania," in Bridges in Danube Basin 2016 - New Trends in Bridge Engineering and Efficient Solution for Large and Medium Span Bridges, vol. 156, J. Bujnak and J. Vican, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 249-256.

[310]    G. Mois, S. Folea, T. Sanislav, L. Miclea, and Ieee, "Low-Power PSoC-Based Environmental Monitoring System," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 109-112.

[311]    A. Moldovan, A. Stan, and M. Giurgiu, "Improving Sentence-level Alignment of Speech with Imperfect Transcripts using Utterance Concatenation and VAD," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 171-174.

[312]    D. Moldovan, C. Pop, M. Antal, T. Cioara, I. Anghel, and I. Salomie, "SWAG: Semantic Web Application Generator - A Library for Using Ontologies as Web Services," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 103-110.

[313]    I. M. Moldovan, N. M. Ilies, S. V. Moldovan, and Sgem, "SUBURBIA - FROM TRANZITION ARCHITECTURE TO CONTEMPORARY RESIDENTIAL DEVELOPMENTS IN ROMANIA," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 639-646.

[314]    I. M. Moldovan, S. V. Moldovan, and N. M. Ilies, "Rural Romanian housing degradation - effect of land restitution and unemployment rates," in 5th International Conference - Agriculture for Life, Life for Agriculture, vol. 10, S. M. Cimpeanu, G. G. Fintineru, and B. Silviu, Eds. (Agriculture and Agricultural Science Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 438-443.

[315]    I. M. Moldovan, S. V. Moldovan, N. M. Ilies, and Sgem, "INVISIBLE ARCHITECTURE - SUSTAINABLE UNDERGROUND ARCHITECTURE," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 555-560.

[316]    I. Moldovan and A. Mathe, "A Study on a Two-Way Post-Tensioned Concrete Waffle Slab," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 227-234.

[317]    I. Moldovan, A. Mathe, A. L. Catarig, and L. C. Letia, Emphasis on Prestress Losses of a Post-Tensioned Concrete Waffle Slab (Modern Technologies for the 3rd Millennium). 40128 Bologna: Medimond S R L, 2016, pp. 141-146.

[318]    L. M. Molnar and D. L. Manea, "New Types of Plastering Mortars Based on Marble Powder Slime," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 251-258.

[319]    C. Muntea, F. Domnita, and Sgem, "HEATING, VENTILATION AND AIR CONDITIONING OF BUILDINGS MONUMENT," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 593-600.

[320]    A. Muresan, C. F. Buldus, and V. Grosu, "The Control of Explosive Force Training in Volleyball Using MGM 15 Jumping Mat," in Wlc 2016: World Lumen Congress. Logos Universality Mentality Education Novelty 2016, vol. 15, A. Sandu, T. Ciulei, and A. Frunza, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2016, pp. 641-651.

[321]    C. I. Muresan, R. De Keyser, C. M. Ionescu, and Ieee, Autotuning Method for a Fractional Order Controller for a Multivariable 13C Isotope Separation Column (2016 European Control Conference). New York: Ieee, 2016, pp. 358-363.

[322]    C. I. Muresan, S. Folea, E. H. Dulf, O. Prodan, and Ieee, Design and Experimental Validation of an Optimal Fractional Order Controller for Vibration Suppression (2016 International Conference on Control, Decision and Information Technologies). New York: Ieee, 2016, pp. 129-133.

[323]    C. M. Muresan, L. Bacali, Amier, and Academia, "ASPECTS REGARDING THE USE OF MARKETING RESEARCH AS A SUPPORT FOR THE INVESTMENT DECISIONS," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 161-171.

[324]    M. P. Muresan, S. Nedevschi, and R. Danescu, "Patch warping and local constraints for improved block matching stereo correspondence," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 321-327.

[325]    V. Muresan, M. Abrudean, M. L. Unguresan, I. Clitan, T. Colosi, and Ieee, Control of the O-18 Isotope Separation Process (2016 Ieee 11th International Symposium on Applied Computational Intelligence and Informatics). New York: Ieee, 2016, pp. 283-288.

[326]    V. Muresan, M. Abrudean, M. L. Unguresan, I. Clitan, T. Colosi, and Ieee, "Modeling of the O-18 Isotope Separation Process," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 513-518.

[327]    V. Muresan et al., "Temperature Modeling and Control in a Tunnel Heat-Treatment Furnace," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 245-250.

[328]    V. Muresan et al., Modeling and Control of the Temperature for Cytostatic Solutions Used in Surgical Procedures (2016 International Conference on Control, Decision and Information Technologies). New York: Ieee, 2016, pp. 706-711.

[329]    G. S. Naghiu, I. Giurca, I. Aschilean, and G. Badea, "Comparative Analysis on the Solutions of Hydrogen Production Using Solar Energy with and without Connection to the Power Network," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 781-788.

[330]    G. S. Naghiu, I. Giurca, J. Aschilean, and G. Badea, "Multicriterial Analysis on Selecting Solar Radiation Concentration Ration for Photovoltaic Panels Using Electre-Boldur Method," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 773-780.

[331]    H. Nagy, M. Ruba, H. Hedesiu, and C. Martis, "Rapid Control Prototyping of a Speed Control Strategy for a Switched Reluctance Machine," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 664-668.

[332]    H. Nagy, M. Ruba, H. Hedesiu, C. Martis, and Ieee, "FPGA Based Real-Time Simulation of a Switched Reluctance Machine Drive Unit," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 449-453.

[333]    C. Nandra and D. Gorgan, "DEFINING EARTH DATA BATCH PROCESSING TASKS BY MEANS OF A FLEXIBLE WORKFLOW DESCRIPTION LANGUAGE," in Xxiii Isprs Congress, Commission Iv, vol. 3, L. Halounova et al., Eds. (International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences, no. 4) Gottingen: Copernicus Gesellschaft Mbh, 2016, pp. 59-66.

[334]    I. Nap, Amier, and Academia, "A SUPPLY CHAIN RISK MANAGEMENT STUDY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 403-409.

[335]    S. Nas, R. Farcas, and A. Porutiu, Considerations Regarding the Stability of Landmarks Used to Determine the Vertical Movements from a Rock Salt Exploitation Field (Modern Technologies for the 3rd Millennium). 40128 Bologna: Medimond S R L, 2016, pp. 43-47.

[336]    I. Nascu, "Modelling and optimization of an activated sludge wastewater treatment process," in 26th European Symposium on Computer Aided Process Engineering, vol. 38A, Z. Kravanja and M. Bogataj, Eds. (Computer Aided Chemical Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 1159-1164.

[337]    L. Nascutiu, C. Giurgea, M. Damian, F. Bode, O. Budiu, and O. Andercou, "Considerations regarding the optically transparent rigid model for PIV investigations. A case study. Part1: Model manufacturing," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 358-365.

[338]    L. Neamt, O. Chiver, Z. Erdei, C. Barz, and Ieee, Considerations about Medium Voltage SF6 Switch Disconnector Framework Design based on 3D Electrostatic FEA (2016 Ieee 16th International Conference on Environment and Electrical Engineering). New York: Ieee, 2016.

[339]    I. Negrean, C. Schonstein, K. Kacso, and Ieee, "Study about the Dynamics of a Translational Robot Axis based on Ball Screw Transmission," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 207-212.

[340]    C. Negru et al., "Cost-aware Cloud Storage Service Allocation for Distributed Data Gathering," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 31-35.

[341]    C. Negrutiu, J. P. Sosa, H. Constantinescu, and B. Heghes, "Crack Analysis of Reinforced High Strength Concrete Elements in Simulated Aggressive Environments," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 4-12.

[342]    J. D. Nkapkop, J. Y. Effa, A. Toma, F. Cociota, M. Borda, and Ieee, Chaos-based image encryption using the RSA keys management for an efficient web communication (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 59-62.

[343]    M. Olaru, J. Schmid, A. Sarbu, and D. Maier, "A STUDY OF THE IMPACT OF INVESTMENTS IN ECONOMIC VALUE OF THE FIRM IN INTERNATIONAL COMPETITION," in Basiq International Conference: New Trends in Sustainable Business and Consumption 2016, R. Pamfilie, V. Dinu, L. Tachiciu, D. Plesea, and C. Vasiliu, Eds. (Proceedings of BASIQ, Bucuresti: Editura Ase, 2016, pp. 210-217.

[344]    M. Padurariu et al., Automatic Control of an OpenFlow-Based Network Using Lua Scripts and SPLAY (2016 International Conference on Communications). New York: Ieee, 2016, pp. 299-302.

[345]    A. Paljanos, C. Munteanu, and J. Karpowicz, "Methodological Challenges in Near-Field Exposure Assessment of Personnel Operating Military Radio Equipment Using Personal Exposimeters: Possible Difficulties in Compliance Analysis," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 287-293.

[346]    E. Pall, L. Tamas, L. Busoniu, and Ieee, Analysis and a home assistance application of online AEMS2 planning (2016 Ieee/Rsj International Conference on Intelligent Robots and Systems). New York: Ieee, 2016, pp. 5013-5019.

[347]    A. Pastrav, E. Puschita, T. Palade, and Ieee, GPStation-6 Employment for GNSS TEC Monitoring in SIRIUS Project (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 63-66.

[348]    S. G. Pavel, H. G. Beleiu, I. Birou, C. Pica, C. Buda, and Ieee, DMS Steady State Function Validation by Comparative Study (2016 13th International Conference on Development and Application Systems). New York: Ieee, 2016, pp. 108-112.

[349]    W. Peng, J. Gyselinck, A. Dziechciarz, C. Martis, and Ieee, Magnetic Equivalent Circuit Modelling of Reluctance Machines (2016 Eleventh International Conference on Ecological Vehicles and Renewable Energies). New York: Ieee, 2016.

[350]    G. Peppas et al., "Lightning Protection of Pipeline Systems," in 2016 33rd International Conference on Lightning Protection(International Conference on Lightning Protection, New York: Ieee, 2016.

[351]    D. Petreus, S. Daraban, and Ieee, "Modular Energy Conversion System Using a Novel Control Structure Based on a Simple Analogue System," in 2016 18th European Conference on Power Electronics and Applications(European Conference on Power Electronics and Applications, New York: Ieee, 2016.

[352]    D. Petreus, T. Patarau, R. Truta, C. Orian, R. Etz, and Ieee, Single-Phase Inverter for Solar Energy Conversion Controlled with DSpace DS1104 (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 256-261.

[353]    T. Petrina, "Fire Resistance of Steel Beam to Column End Plate Connections," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016, Wmcaus 2016, vol. 161, M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, and A. Segalini, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 143-149.

[354]    T. Petrina, "Steel Connections Deterioration Coefficient Introduction for Post-Earthquake Fire Analysis," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016, Wmcaus 2016, vol. 161, M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, and A. Segalini, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 137-142.

[355]    T. Petrina, "Steel Connections Post-Earthquake Fire Tests Setup," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016, Wmcaus 2016, vol. 161, M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, and A. Segalini, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 133-136.

[356]    T. Petrina and Iop, "Fire Behaviour of Structural Steel - Code vs. Tests," in World Multidisciplinary Earth Sciences Symposium, vol. 44(IOP Conference Series-Earth and Environmental Science, Bristol: Iop Publishing Ltd, 2016.

[357]    T. Petrina and Iop, "Post-Earthquake Fire Tests - Part 1: Report," in World Multidisciplinary Earth Sciences Symposium, vol. 44(IOP Conference Series-Earth and Environmental Science, Bristol: Iop Publishing Ltd, 2016.

[358]    T. Petrina and Iop, "Post-Earthquake Fire Tests - Part 2: Failure Modes," in World Multidisciplinary Earth Sciences Symposium, vol. 44(IOP Conference Series-Earth and Environmental Science, Bristol: Iop Publishing Ltd, 2016.

[359]    A. Petrovai, R. G. Danescu, M. Negru, C. C. Vancea, and S. Nedevschi, "A Stereovision based Rear-End Collision Warning System on Mobile Devices," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 285-292.

[360]    C. M. Pintea and C. Ticala, "Medical Image Processing: A Brief Survey and a New Theoretical Hybrid ACO Model," Combinations of Intelligent Methods and Applications (Cima 2014), vol. 46, pp. 117-134, 2016.

[361]    D. Pisla et al., "BIO-PROS-2: an innovative parallel robotic structure for transperineal prostate biopsy," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 157-162.

[362]    D. Pisla et al., "Optimal Planning of Needle Insertion for Robotic-Assisted Prostate Biopsy," in Advances in Robot Design and Intelligent Control, vol. 371, T. Borangiu, Ed. (Advances in Intelligent Systems and Computing, Berlin: Springer-Verlag Berlin, 2016, pp. 339-346.

[363]    A. Plesa, O. Giurgiu, and D. Banyai, "Auto radiators - Study regarding air flow along the channels," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 390-398.

[364]    C. S. Plesa, M. Neag, C. Boianceanu, A. Negoita, and Ieee, Design Methodology for Over-Temperature Protection of an LDO Voltage Regulator by Using Electro-Thermal Simulations (2016 22nd International Workshop on Thermal Investigations of Ics and Systems). New York: Ieee, 2016, pp. 46-51.

[365]    Z. A. Polgar and A. C. Hosu, Advanced Mobile Router Platform with Load Balancing Capabilities in Heterogeneous Networks (2016 39th International Conference on Telecommunications and Signal Processing). New York: Ieee, 2016, pp. 133-139.

[366]    Z. A. Polgar and A. C. Hosu, Load Balancing Mechanism in Heterogeneous Networks for Intelligent Transportation Systems Based on Network Level Context Information (2016 39th International Conference on Telecommunications and Signal Processing). New York: Ieee, 2016, pp. 20-26.

[367]    C. B. Pop, V. R. Chifu, I. S. A. Cozac, M. Antal, and C. Pop, "Optimizing the Data Center Energy Consumption Using a Particle Swarm Optimization-Based Approach," in Economics of Grids, Clouds, Systems, and Services, Gecon 2015, vol. 9512, J. Altmann, G. C. Silaghi, and O. F. Rana, Eds. (Lecture Notes in Computer Science, Cham: Springer Int Publishing Ag, 2016, pp. 176-189.

[368]    C. B. Pop, V. R. Chifu, I. Salomie, C. Prigoana, T. Boros, and D. Moldovan, "Generating Healthy Menus for Older Adults using a Hybrid Honey Bees Mating Optimization Approach," in 2015 17th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, L. Kovacs et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 452-459.

[369]    C. V. Pop and D. Fodorean, "Modelling of an In-Wheel Motor with Integrated Magnetic Gear for Electric Vehicle Applications," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 240-244.

[370]    C. V. Pop, D. Fodorean, and Ieee, In-Wheel Motor with Integrated Magnetic Gear for Extended Speed Applications (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 407-412.

[371]    F. P. Pop, R. Martis, A. Daramus, C. Martis, A. C. Pop, and I. Vintiloiu, "Design and Analysis of Slot-Pole Combination for Synchronous Reluctance Machine with Concentrated Windings for Automotive Applications," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 229-234.

[372]    F. Pop et al., Evaluation of Conducted Disturbances from LED Lamps According to EN 55015 (2016 International Conference on Communications). New York: Ieee, 2016, pp. 509-512.

[373]    M. Pop, N. Ciont, M. Iliescu, and Sgem, "ASSESSING THE INFLUENCE OF DIFFERENT ADDITIVES ON THE RECYCLING CAPABILITIES OF ASPHALT MIXTURES," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 19-26.

[374]    M. Pop, M. Dobra, C. Domuta, M. Hulea, A. Astilean, and Ieee, "Two stage scheduling method of touristic transport in multimodal networks," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 315-319.

[375]    M. Pop, Z. Kiss, and P. Pernes, "Joint Configuration of Composite Beams to Reinforced Concrete Wall," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 108-114.

[376]    O. Pop, R. Fizesan, A. Taut, E. Ceuca, and Ieee, "Influence of Switching Frequency on Active and Reactive Load Power of Resonant Converters," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 328-331.

[377]    P. G. Pop, "In-memory Dedicated Dot-Plot Analysis for DNA Repeats Detection," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 317-320.

[378]    P. P. Pop, A. Pop-Vadean, C. Barz, and T. Latinovic, "Transdisciplinary research in theatrical literature through technological integration and interfacing information," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[379]    P. P. Pop, A. Pop-Vadean, C. Barz, T. Latinovic, and O. Chiver, "Research on models of biological systems that can be integrated into mechatronic systems," in International Conference on Applied Sciences 2015, vol. 106, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[380]    S. Pop, V. Bande, I. H. Baciu, and Ieee, Wireless Diagnosis and Monitoring System of Sensor Network from Civil Structures (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 102-105.

[381]    A. Pop-Vadean, P. P. Pop, C. Barz, and C. Lung, "RF waves - Measuring their energy (dBm) in three points into Baia Mare, Romania," in International Conference on Applied Sciences 2015, vol. 106, L. D. Lemle and Y. Jiang, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[382]    D. C. Popa and D. Fodorean, "Electrical Machines Solutions for Air Conditioning System in Automotive Industry," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 261-266.

[383]    D. C. Popa, A. C. Pop, C. Martis, I. Vintiloiu, and Ieee, Design of Induction Motor for Electric Power-Assisted Steering Systems (2016 Xxii International Conference on Electrical Machines). New York: Ieee, 2016, pp. 1566-1571.

[384]    M. Popa, Z. Kiss, H. Constantinescu, and G. Bolca, "Case Study: Designing a 40 Storey High Office Building Using Two Variants, With Regular Concrete Columns and With Compound Ultra-High Performance Concrete Columns and Regular Concrete Columns," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 40-47.

[385]    S. Popa, C. Striletchi, M. F. Vaida, and Ieee, Implications of a Consistency-Oriented Sync API in an ERP to Cloud Integration Library - A Case Study (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 43-46.

[386]    S. Popa, M. F. Vaida, and Ieee, A Practical Abstraction of ERP to Cloud Integration Complexity: The Easy Way (2016 15th Roedunet Conference - Networking in Education and Research). New York: Ieee, 2016.

[387]    B. Porumb, M. Balan, and R. Porumb, "Potential of indirect evaporative cooling to reduce the energy consumption in fresh air conditioning applications," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 433-441.

[388]    B. Porumb, P. Unguresan, L. F. Tutunaru, A. Serban, and M. Balan, "A review of indirect evaporative cooling operating conditions and performances," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 452-460.

[389]    B. Porumb, P. Unguresan, L. F. Tutunaru, A. Serban, and M. Balan, "A review of indirect evaporative cooling technology," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 461-471.

[390]    R. Porumb, B. Porumb, and M. Balan, "Baseline evaluation of potential to use solar radiation in air conditioning applications," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 442-451.

[391]    M. Purcar, C. Munteanu, A. Avram, and A. Bojita, "A Two Layer Ground Computational Model for the Numerical Simulations of the Earthing Systems," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 398-402.

[392]    M. Purcar, C. Munteanu, A. Avram, F. Miron, and Ieee, "CAD/CAE Modeling of Electromagnetic Field Distribution in HV Substations and Investigation of the Human Exposure," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[393]    A. Puscasiu, A. Fanca, H. Valean, and Ieee, "Tracking and Localization System using Android Mobile Phones," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 353-358.

[394]    A. Puskas and L. Moga, "Sustainability of Masonry and Reinforced Concrete Frame Structures. Case Studies," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 304-311.

[395]    M. Pustan, C. Dudescu, C. Birleanu, F. Rusu, R. Chiorean, and S. Craciun, "Effect of geometrical dimensions on the tribomechanical response of a gold micromembrane with bent beam hinges," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[396]    M. Pustan, C. Dudescu, C. Birleanu, F. Rusu, and Ieee, "Dynamic response of a polysilicon microbridge driven by different electrostatic forces," in 2016 39th International Semiconductor Conference(International Semiconductor Conference, New York: Ieee, 2016, pp. 95-100.

[397]    A. Racasan et al., "Analysis, Identification and Minimization the Parasitic Effects of the Multilayer Spiral Inductors," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 392-397.

[398]    M. Rad, F. Simonca, A. Fratean, P. Dobra, and Ieee, "Embedded speed control of BLDC motors using LPC1549 microcontroller," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 321-325.

[399]    A. Radulescu, G. M. T. Radulescu, M. Radulescu, O. Stefan, C. Radulescu, and Sgem, "CONSIDERATIONS REGARDING THE SUBSTANTIATION OF THE "KINEMATIC SURVEYING" CONCEPT," in 16th International Multidisciplinary Scientific Geoconference, Sgem 2016: Science and Technologies in Geology, Exploration and Mining, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 63-68.

[400]    A. Radulescu, G. M. T. Radulescu, O. Stefan, M. Radulescu, C. Radulescu, and Sgem, ""EMERGENCY SPATIAL SYSTEM" CROSS-BORDER PREDICTION SYSTEM FOR NATURAL DISASTERS BASED ON EXPLOITATION OF SATELLITE TECHNOLOGIES IN HUNGARY, SLOVAKIA, ROMANIA AND UKRAINE," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 17-24.

[401]    A. Radulescu, G. M. T. Radulescu, O. Stefan, V. Radulescu, C. Radulescu, and S. Nas, The Danger Created by the Recent Tilting of the Smoke Chimney Located on the Former Industrial Platform in the City of Baia Mare (Modern Technologies for the 3rd Millennium). 40128 Bologna: Medimond S R L, 2016, pp. 61-66.

[402]    C. M. Radulescu, O. Stefan, G. M. T. Radulescu, A. Radulescu, and M. Radulescu, "Management of Stakeholders in Urban Regeneration Projects. Case Study: Baia-Mare, Transylvania," Sustainability, vol. 8, no. 3, p. 22, Mar 2016, Art. no. 238.

[403]    C. Radulescu et al., Increasing the Competitiveness of Romanian Universities by Merging (2016 2nd International Conference on Modern Education and Social Science). Lancaster: Destech Publications, Inc, 2016, pp. 113-119.

[404]    C. Radulescu et al., The Access to Performance in Romanian Academic System Possibilities for Increasing the Competitiveness of Universities in Romania (2016 2nd International Conference on Modern Education and Social Science). Lancaster: Destech Publications, Inc, 2016, pp. 104-112.

[405]    G. M. T. Radulescu, O. Stefan, V. Radulescu, C. Radulescu, A. Radulescu, and S. Nas, Considerations Regarding the Analysis of the Some Effects of Preserved Underground Mines on the Surface in Northwest Romania (Modern Technologies for the 3rd Millennium). 40128 Bologna: Medimond S R L, 2016, pp. 67-72.

[406]    M. Radulescu, C. Radulescu, A. Radulescu, G. M. T. Radulescu, S. Nas, and Sgem, "ISSUES ON THE CONTRIBUTION OF GEOGRAPHIC INFORMATION SYSTEM IN THE HANDLING OF EMERGENCIES CAUSED BY NATURAL DISASTERS," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 295-+.

[407]    M. Radulescu, C. Radulescu, A. Radulescu, G. M. T. Radulescu, O. Stefan, and Sgem, "CONSIDERATIONS ON THE CONTRIBUTION OF GIS IN URBAN REGENERATION MANAGEMENT OF BROWNFIELD SITES," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 135-142.

[408]    G. Ramona, D. Moga, V. Cojocaru, N. Cennamo, L. Zeni, and Sgem, "FUZZY CONTROL SYSTEM BASED ON SPR-POF FIBER SENSOR FOR CHLORINE MONITORING IN WATER," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 895-899.

[409]    O. Ratiu, A. Rusu, A. Pastrav, T. Palade, E. Puschita, and Ieee, "Implementation of an UWB-based Module Designed for Wireless Intra-Spacecraft Communications," in 2016 Ieee International Conference on Wireless for Space and Extreme Environments(International Conference on Wireless for Space and Extreme Environments, New York: Ieee, 2016, pp. 146-151.

[410]    G. C. Rogozan, V. Micle, and I. M. Sur, "MAPS OF HEAVY METALS IN CLUJ COUNTY SOILS DEVELOPED USING THE REGRESSION-KRIGING METHOD," Environmental Engineering and Management Journal, vol. 15, no. 5, pp. 1035-1039, May 2016.

[411]    V. A. Roib, "Simulation Model for Calculating the Route Time of a Vehicle," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 576-581.

[412]    K. Ronay and C. D. Dumitru, "An Approach to Intelligent Road Lighting System with Renewable Energy Based Power Supply," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 836-839.

[413]    K. Ronay and C. D. Dumitru, "Technical and Economical Analysis of a Solar Power System Supplying a Residential Consumer," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 829-835.

[414]    R. B. Roxana and D. Eva-Henrietta, "Auto-tuning Fractional Order Control of a Laboratory Scale Equipment," in Proceedings of the 2016 International Conference on Mechatronics, Control and Automation Engineering, vol. 58, S. H. Sadeghian, U. Mehta, and P. Rajbongshi, Eds. (AER-Advances in Engineering Research, Paris: Atlantis Press, 2016, pp. 46-50.

[415]    R. B. Roxana, N. Joan, and Ieee, "Advanced Control of a Wastewater Treatment Plant," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 304-307.

[416]    M. Ruba and D. Fodorean, "Development of a Complete Motor-Drive Solution for Light EV Based on a SRM," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 197-204.

[417]    M. Ruba, D. Fodorean, and Ieee, "Motor-drive solution for light electric vehicles based on a switched reluctance machine," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 443-448.

[418]    M. Ruba, N. Hunor, H. Hedesiu, and C. Martis, "Real-Time FPGA Model in the Loop Analysis of Permanent Magnet Synchronous Machine for LEV," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 219-224.

[419]    M. Ruba, N. Hunor, H. Hedesiu, C. Martis, and Ieee, "FPGA based processor in the loop analysis of variable reluctance machine with speed control," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 455-460.

[420]    M. Ruba, F. Jurca, C. Martis, and Ieee, Analysis of synchronous relucrance machine for light electric vehicle applications (2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion). New York: Ieee, 2016, pp. 1138-1143.

[421]    C. Rusu, J. Astola, and Ieee, "Positive Trigonometric Polynomials and One-Dimensional Discrete Phase Retrieval Problem," in 2016 24th European Signal Processing Conference(European Signal Processing Conference, New York: Ieee, 2016, pp. 433-437.

[422]    C. Rusu, L. Grama, J. Astola, and Ieee, On Some Properties of Positive Trigonometric Polynomials Related to One-Dimensional Discrete Phase Retrieval Problem (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 289-292.

[423]    C. Rusu, T. L. Tiuca, S. Noveanu, and D. Mandru, "A KBE tool for solving the mechanisms kinematics," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[424]    F. M. Rusu, V. V. Merie, I. M. Pintea, and A. Molea, "Adhesion analysis for chromium nitride thin films deposited by reactive magnetron sputtering," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[425]    R. Rusu-Both, E. H. Dulf, C. Festila, and Ieee, "Fractional Order Model Reference Boiler Control for a Isotope Separation Column," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 419-422.

[426]    R. Salha and F. V. Tosa, "Looking for Oil-free Building Materials Clay Pipes to Replace Polymer Pipes," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 343-350.

[427]    T. Sanislav, K. Merza, G. Mois, L. Miclea, and Ieee, "Cyber-Physical System Dependability Enhancement through Data Mining," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 119-123.

[428]    D. M. Sas, K. Zoltan, and Ieee, "Preliminaries in (M-pdx) Method associated with Cohen equations," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 501-506.

[429]    A. M. Sava, L. Bacali, M. Boscoianu, Amier, and Academia, "RESEARCH REGARDING THE MEASUREMENT PRACTICES OF DISTRIBUTION PERFORMANCE AS A COMPONENT OF MARKETING PERFORMANCE," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 456-462.

[430]    S. Sebastian, L. Claudiu, and Ieee, Obstacle avoidace algorithm (2016 Ieee 22nd International Symposium for Design and Technology and Electronic Packaging). New York: Ieee, 2016, pp. 262-265.

[431]    S. B. Sebesi, H. L. Groza, A. Ianosi, A. Dimitrova, and D. Mandru, "Specific issues of the design for the elderly," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[432]    G. Sebestyen, A. Hangan, and Ieee, "Bloom Filters for Information Retrieval in the Context of IoT," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 347-352.

[433]    G. Sebestyen, I. Stoica, and A. Hangan, "Human Activity Recognition and Monitoring for Elderly People," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 341-347.

[434]    E. Semenciuc, A. Pastrav, T. Palade, E. Puschita, and Ieee, Performance Evaluation of a Cloud-Based QoS Support Mechanism (2016 International Conference on Communications). New York: Ieee, 2016, pp. 243-246.

[435]    M. Senila, A. Sigauan, I. Marginean, and F. Dinu, NUMERICAL MODELS FOR STEEL AND COMPOSITE ECCENTRICALLY BRACED FRAMES UNDER SEISMIC ACTIONS (Irf2016: 5th International Conference Integrity-Reliability-Failure). Porto: Inegi-Inst Engenharia Mecanica E Gestao Industrial, 2016, pp. 1453-1454.

[436]    M. Senila, A. Sigauan, and I. Petran, Comparison between behavior of steel and composite Eccentrically Braced Frames with long links (Recent Progress in Steel and Composite Structures). Boca Raton: Crc Press-Taylor & Francis Group, 2016, pp. 237-243.

[437]    P. Sestras, M. V. Bondrea, T. Salagean, M. Dirja, S. M. Cimpeanu, and Sgem, "ENGINEERING SURVEY FOR EXCAVATED VOLUME CALCULATION IN A CONSTRUCTION SITE USING A TOTAL STATION," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 247-254.

[438]    R. Siecoban, R. Martis, C. Martis, C. Husar, L. Coadalata, and C. Irimia, "Multiphysics Design, Analysis and Optimisation Platform of PMSM for Automotive Applications," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 251-255.

[439]    M. Simion, L. Socaciu, and P. Unguresan, "Factors which influence the thermal comfort inside of vehicles," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 472-480.

[440]    F. Simonca, M. Rad, P. Dobra, and F. Adrian, "Design Of A Low Cost CAD-CAM Convertor For CNC Applications," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 602-606.

[441]    I. Smical, A. Muntean, and V. Micle, "INFLUENCE OF SOME NATURAL ORGANIC ADDITIVES ON THE QUALITY OF VEGETAL COMPOST," Environmental Engineering and Management Journal, vol. 15, no. 5, pp. 1041-1048, May 2016.

[442]    L. Socaciu, O. Giurgiu, D. Banyai, and M. Simion, "PCM selection using AHP method to maintain thermal comfort of the vehicle occupants," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 489-497.

[443]    T. M. Soimosan, R. A. Felseghi, and Sgem, "EFFICIENT SOLAR TECHNIQUE FOR BUILDINGS CONNECTED TO THE DISTRICT HEATING SYSTEM. INDICATORS OF PERFORMANCE," in Energy and Clean Technologies Conference Proceedings, Sgem 2016, Vol Iii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 251-258.

[444]    V. F. Soporan, M. Crisan, T. Lehene, and A. L. Pop, "Methodology for appreciation the manufacturing castings from perspective of circular economy," in International Conference on Innovative Research - Icir Euroinvent 2016, vol. 133, A. V. Sandu, M. M. B. Abdullah, P. Vizureanu, S. Z. AbdRahim, and I. Sandu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[445]    E. St Chifu, T. St Letia, and V. R. Chifu, "Unsupervised Aspect Level Sentiment Analysis Using Self-organizing Maps," in 2015 17th International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, L. Kovacs et al., Eds. (International Symposium on Symbolic and Numeric Algorithms for Scientific Computing, New York: Ieee, 2016, pp. 468-475.

[446]    A. Stan, C. Valentini-Botinhao, B. Orza, M. Giurgiu, and Ieee, BLIND SPEECH SEGMENTATION USING SPECTROGRAM IMAGE-BASED FEATURES AND MEL CEPSTRAL COEFFICIENTS (2016 Ieee Workshop on Spoken Language Technology). New York: Ieee, 2016, pp. 597-602.

[447]    O. Stan, C. Avram, I. Stefan, A. Astilean, and Ieee, "Integrated Innovative Solutions to Improve Healthcare Scheduling," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 131-136.

[448]    I. Stefan, S. Enyedi, L. Miclea, D. Capatina, I. Stoian, and Ieee, "Security Concerns regarding a Federative Web Service," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 137-141.

[449]    O. Stefan, A. Radulescu, G. M. T. Radulescu, C. Radulescu, M. Radulescu, and S. Nas, Rapid Impact Assessment Matrix(RIAM) as a method of selection of the optimal Urban Regeneration variant, Case Study: Brownfields of Baia Mare City, Romania (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 1356-1369.

[450]    O. Stefan, A. Radulescu, G. M. T. Radulescu, O. Radulescu, M. Radulescu, and S. Nas, Program for monitoring subsidence phenomena of areas located above former mines in Maramure, Romania (Innovation Management and Education Excellence Vision 2020: from Regional Development Sustainability to Global Economic Growth, Vols I - Vi). Norristown: Int Business Information Management Assoc-Ibima, 2016, pp. 1330-1346.

[451]    O. Stefan and Sgem, "TOPOGRAPHIC ANALYSIS OF THE STABILITY OF THE UNDERGROUND DEPOSIT "HOPE"," in Informatics, Geoinformatics and Remote Sensing Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 649-655.

[452]    S. Stefanescu and A. Botezan, "Overview of the Protection Lightning Standards Suite EN/IEC 62305," in Proceedings of the 2016 International Conference and Exposition on Electrical and Power Engineering, M. Gavrilas, C. G. Haba, O. Ivanov, and B. C. Neagu, Eds. (International Conference and Exposition on Electrical and Power Engineering, New York: Ieee, 2016, pp. 504-509.

[453]    M. Stet, "Economic, Social and Environmental Effects of Electric Traction," in Wlc 2016: World Lumen Congress. Logos Universality Mentality Education Novelty 2016, vol. 15, A. Sandu, T. Ciulei, and A. Frunza, Eds. (European Proceedings of Social and Behavioural Sciences, Nicosia: Future Acad, 2016, pp. 1001-1006.

[454]    I. Stoian, D. Capatina, O. Ghiran, L. C. Miclea, S. Enyedi, and Ieee, "SCADA Plug-in Modules and Instruments for Federative Organisation," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 557-562.

[455]    O. Stoicuta, T. Pana, and Ieee, "Asymptotic Stability Study of Induction Motor Sensorless Vector Control Systems with MRAS observer," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 245-250.

[456]    O. Stoicuta, T. Pana, C. Mandrescu, and Ieee, "The Control System Analysis of the Coal Flow on the Scrapers Conveyor in a Longwall Mining System," in 2016 International Conference on Applied and Theoretical Electricity(International Conference on Applied and Theoretical Electricity, New York: Ieee, 2016.

[457]    C. Striletchi, M. Vaida, L. Chiorean, S. Popa, and Ieee, A cross-platform solution for software plagiarism detection (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 141-144.

[458]    N. Stroia et al., "Internet Based SCADA Platform for Monitoring Strategic Hydrotechnical Structures," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 545-549.

[459]    T. Sumalan, R. Arsinte, E. Lupu, and Ieee, "Design Aspects of an Embedded Remote Controlled Vehicle based on Intel Galileo Platform," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 175-178.

[460]    M. Susca and P. Dobra, "Notch Filter Sensitivity Analysis With Root Locus Considering Parameter Uncertainty," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 387-391.

[461]    J. Suto, S. Oniga, and P. P. Sitar, Comparison of Wrapper and Filter Feature Selection Algorithms on Human Activity Recognition (2016 6th International Conference on Computers Communications and Control). New York: Ieee, 2016, pp. 124-129.

[462]    J. Sykora, V. Bota, Y. Zhang, and S. Ruiz, "Cooperative Strategies and Networks," in Cooperative Radio Communications for Green Smart Environments, vol. 47, N. Cardona, Ed. (River Publishers Series in Communications, Aalborg: River Publishers, 2016, pp. 271-303.

[463]    L. Szabo, D. Fodorean, A. Vasilache, and Ieee, Bearing Fault Detection of Electrical Machines Used in Automotive Applications (2016 Xxii International Conference on Electrical Machines). New York: Ieee, 2016, pp. 2184-2190.

[464]    L. Szabo, D. Pitica, O. Pop, and Ieee, "The Voltage Response of Lead-acid Battery Through Pulses Charging with Variable Frequency and Duty Cycle," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 254-256.

[465]    J. Szalai and F. E. Mozes, "Intelligent Digital Signal Processing and Feature Extraction Methods," in New Approaches in Intelligent Image Analysis: Techniques, Methodologies and Applications, vol. 108, R. Kountchev and K. Nakamatsu, Eds. (Intelligent Systems Reference Library, Berlin: Springer-Verlag Berlin, 2016, pp. 59-91.

[466]    T. Szasz, A. Basarab, M. F. Vaida, D. Kouame, and Ieee, "ELASTIC-NET BASED BEAMFORMING IN MEDICAL ULTRASOUND IMAGING," in 2016 Ieee 13th International Symposium on Biomedical Imaging(IEEE International Symposium on Biomedical Imaging, New York: Ieee, 2016, pp. 477-480.

[467]    H. Szilagyi, C. Baera, O. Corbu, A. Puskas, and Sgem, "RESEARCH AND VALORIZATION OF VOLCANIC TUFF AGGREGATES IN LIGHTWEIGHT CONCRETE," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 197-202.

[468]    H. Szilagyi, C. Baera, A. Lazarescu, A. Ioani, and Sgem, "GEOPOLYMER - THE ALTERNATIVE, GREEN BUILDING MATERIAL," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 113-120.

[469]    I. Tamas and I. Salomie, "Artemis - an extensible natural language framework for data querying and manipulation," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 85-91.

[470]    M. O. Tatar, F. Haiduc, A. Szalontai, A. Pop, and Ieee, "Design and Development of the Synchronous Mobile Robots," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 197-202.

[471]    M. O. Tatar and A. Pop, "Development of an in pipe inspection minirobot," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[472]    R. Terebes et al., PolSAR Image Denoising using Directional Diffusion (2016 12th Ieee International Symposium on Electronics and Telecommunications). New York: Ieee, 2016, pp. 339-342.

[473]    A. E. Tiuc, V. Dan, H. Vermesan, T. Gabor, and M. Proorocu, "RECOVERY OF SAWDUST AND RECYCLED RUBBER GRANULES AS SOUND ABSORBING MATERIALS," Environmental Engineering and Management Journal, vol. 15, no. 5, pp. 1093-1101, May 2016.

[474]    A. E. Tiuc, H. Vermesan, T. Gabor, and O. Vasile, "Improved sound absorption properties of polyurethane foam mixed with textile waste," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 559-565.

[475]    T. L. Tiuca, C. Rusu, S. Noveanu, and D. Mandru, "General KBE model with inheritance and multi CAD support," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[476]    L. Todea and R. Demarcsek, "Anglicisms in the Romanian business and technology vocabulary," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[477]    R. Todoran, D. Todoran, E. M. Anitas, and Z. Szakacs, "Optical luminescence studies of diffusion times at the potassium ethyl xanthate adsorption layer on the surface of sphalerite minerals," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[478]    P. Toma, P. Dorin, E. Radu, L. Eniko, and Ieee, "Small Signal Induction Generator Model Connected in a Frequency-Droop Controlled Renewable Energy Microgrid," in 2016 39th International Spring Seminar on Electronics Technology(International Spring Seminar on Electronics Technology ISSE, New York: Ieee, 2016, pp. 296-300.

[479]    F. V. Tosa and R. Salha, "The Behavior of Different Precast Concrete Structures Under Seismic Action," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 235-242.

[480]    I. Ulici et al., "CRISIS MANAGEMENT AND AUTOMOTIVE INDUSTRY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 17-25.

[481]    M. Ungureanu, I. Craciun, M. Banica, and A. Dascalescu, "Study for elevator cage position during the braking period," in International Conference on Innovative Ideas in Science, vol. 144, L. D. Lemle, Ed. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[482]    M. Ungureanu, N. Pop, and N. Ungureanu, "Innovation and Technology Transfer for Business Development," in International Conference on Manufacturing Engineering and Materials, Icmem 2016, vol. 149, S. Hloch and G. Krolczyk, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 495-500.

[483]    P. Unguresan, D. Petreus, A. Pocola, and M. Balan, "Potential of solar ORC and PV systems to provide electricity under Romanian climatic conditions," in Eenviro-Yrc 2015 - Bucharest, vol. 85, R. M. Damian, Ed. (Energy Procedia, Amsterdam: Elsevier Science Bv, 2016, pp. 584-593.

[484]    G. M. Urian and A. Haupt-Karp, "Reduced Carbon Footprint with Composite Structures," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 282-289.

[485]    C. Vaida et al., "Development of a Control System for a HEXA Parallel Robot," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 213-218.

[486]    C. Vaida, D. Pisla, J. Schadlbauer, M. Husty, and N. Plitea, "Kinematic Analysis of an Innovative Medical Parallel Robot Using Study Parameters," in New Trends in Medical and Service Robots: Human Centered Analysis, Control and Design, vol. 39, P. Wenger, C. Chevallereau, D. Pisla, H. Bleuler, and A. Rodic, Eds. (Mechanisms and Machine Science, Berlin: Springer-Verlag Berlin, 2016, pp. 85-99.

[487]    R. Vaida, L. Bacali, E. S. Lakatos, N. Barkoczi, Amier, and Academia, "CONSUMER NEUROSCIENCE-RESEARCH INSTRUMENTS AND SHORT HISTORY," in From Management of Crisis to Management in a Time of Crisis(Review of Management and Economic Engineering International Management Conference, Cluj-Napoca: Todesco Publishing House, 2016, pp. 200-205.

[488]    C. C. Vancea, V. C. Miclea, S. Nedevschi, and Ieee, "Improving stereo reconstruction by sub-pixel correction using histogram matching," in 2016 Ieee Intelligent Vehicles Symposium(IEEE Intelligent Vehicles Symposium, New York: Ieee, 2016, pp. 335-341.

[489]    C. C. Vancea and S. Nedevshi, "FPGA-based stereo vision hardware for generating dense disparity maps," in 2016 Ieee 12th International Conference on Intelligent Computer Communication and Processing, R. Potolea and R. R. Slavescu, Eds. (IEEE International Conference on Intelligent Computer Communication and Processing ICCP, New York: Ieee, 2016, pp. 225-232.

[490]    S. Varga and C. G. Chiorean, "Seismic Assessment of Reinforced Concrete Frameworks Through Advanced Pushover Analysis and Nonlinear Response of A SDOF Oscillator," in World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium 2016, Wmcaus 2016, vol. 161, M. Drusa, I. Yilmaz, M. Marschalko, E. Coisson, and A. Segalini, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 332-336.

[491]    I. V. Vasile, R. Potolea, and M. Dinsoreanu, Unsupervised Classification of Opinions (Kdir: Proceedings of the 8th International Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management - Vol. 1). Setubal: Scitepress, 2016, pp. 360-366.

[492]    L. Vegh, "A Different Perspective on Cyber-Physical Systems Security," in 2016 20th International Conference on System Theory, Control and Computing, E. Petre and M. Brezovan, Eds. (International Conference on System Theory Control and Computing, New York: Ieee, 2016, pp. 435-440.

[493]    L. Vegh, L. Miclea, and Ieee, "Complex Event Processing for Attack Detection in a Cyber-Physical System," in Proceeding of 2016 Ieee International Conference on Automation, Quality and Testing, Robotics(IEEE International Conference on Automation Quality and Testing Robotics, New York: Ieee, 2016, pp. 113-118.

[494]    L. Vegh, L. Miclea, and Ieee, Secure and Efficient Communication in Cyber-Physical Systems through Cryptography and Complex Event Processing (2016 International Conference on Communications). New York: Ieee, 2016, pp. 273-276.

[495]    M. Vlad, V. Marusceac, and Sgem, "USING RECYCLED SYNTHETIC MATERIALS AS REINFORCEMENTS FOR MODERN LIGHTWEIGHT STRUCTURAL ELEMENTS," in Nano, Bio and Green - Technologies for a Sustainable Future Conference Proceedings, Sgem 2016, Vol Ii(International Multidisciplinary Scientific GeoConference-SGEM, Sofia: Stef92 Technology Ltd, 2016, pp. 405-412.

[496]    M. Vladimir and V. Mihai, "Economical solutions for short-span bridges using reinforced glue laminated timber and steel," in Bridges in Danube Basin 2016 - New Trends in Bridge Engineering and Efficient Solution for Large and Medium Span Bridges, vol. 156, J. Bujnak and J. Vican, Eds. (Procedia Engineering, Amsterdam: Elsevier Science Bv, 2016, pp. 227-232.

[497]    I. Vlasin, "INTEGRATED TRANSCULTURAL PERSPECTIVE TO OVERTAKE RELATIVITY IN EDUCATION," in Elearning Vision 2020!, Vol Iii, I. Roceanu et al., Eds. (eLearning and Software for Education, Bucharest: Carol I Natl Defence Univ Publishing House, 2016, pp. 59-66.

[498]    I. Vlasin and C. B. Chirila, "ONLINE CONTEST BASED ON INTEGRATION OF ACTIVITIES, ADAPTABILITY AND STUDENTS COOPERATION USING ILIAS LMS," in Elearning Vision 2020!, Vol Iii, I. Roceanu et al., Eds. (eLearning and Software for Education, Bucharest: Carol I Natl Defence Univ Publishing House, 2016, pp. 67-74.

[499]    I. Vlasin, S. Greta, L. Dache, and V. Maties, "Integrative platform based on the mechatronics model for educational technologies focused on competence," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[500]    G. R. Voichita, E. Voiculescu, N. Cennamo, L. Luongo, L. Zeni, and Ieee, Augmented workplace for SPR sensor application (2016 Ieee Sensors Applications Symposium). New York: Ieee, 2016, pp. 236-239.

[501]    R. C. Voicu et al., "Design, Simulation and Testing of Polymeric Microgrippers with V-shaped Electrothermal Actuators and Encapsulated Heaters," in 2016 39th International Semiconductor Conference(International Semiconductor Conference, New York: Ieee, 2016, pp. 89-92.

[502]    O. I. Vulcu and M. Arghir, "Impact of maintenance in the automotive field. Experimental study of mechanical vibration," in 7th International Conference on Advanced Concepts in Mechanical Engineering, vol. 147, I. Doroftei, A. Popescu, and C. Bujoreanu, Eds. (IOP Conference Series-Materials Science and Engineering, Bristol: Iop Publishing Ltd, 2016.

[503]    E. Wagner, "A New Method of Diminishing Errors of Form Generated by the Imprecision of CNC Machines," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 13-19.

[504]    Y. M. Wu, E. Breaz, F. Gao, and A. Miraoui, "A Modified Relevance Vector Machine for PEM Fuel-Cell Stack Aging Prediction," Ieee Transactions on Industry Applications, vol. 52, no. 3, pp. 2573-2581, May-Jun 2016.

[505]    M. Wuilpart, B. Vanus, A. Andrasan, A. Gusarov, P. Moreau, and P. Megret, "Study of a fibre-optics current sensor for the measurement of plasma current in ITER," in Sixth European Workshop on Optical Fibre Sensors, vol. 9916, E. Lewis, Ed. (Proceedings of SPIE, Bellingham: Spie-Int Soc Optical Engineering, 2016.

[506]    J. Xu, L. Busoniu, T. van den Boom, and B. De Schutter, "Receding-Horizon Control for Max-Plus Linear Systems with Discrete Actions Using Optimistic Planning," in 2016 13th International Workshop on Discrete Event Systems, C. G. Cassandras, A. Giua, and Z. W. Li, Eds. (International Workshop on Discrete Event Systems, New York: Ieee, 2016, pp. 398-403.

[507]    J. Xu, T. van den Boom, L. Busoniu, B. de Schutter, and Ieee, "Model Predictive Control for Continuous Piecewise Affine Systems Using Optimistic Optimization," in 2016 American Control Conference(Proceedings of the American Control Conference, New York: Ieee, 2016, pp. 4482-4487.

[508]    R. Zagon and K. Zoltan, "Shear Behaviour of UHPC Concrete Beams," in 9th International Conference Interdisciplinarity in Engineering, Inter-Eng 2015, vol. 22, L. Moldovan, Ed. (Procedia Technology, Amsterdam: Elsevier Science Bv, 2016, pp. 122-126.

[509]    M. V. Zaharia, F. Gillon, M. M. Radulescu, and Ieee, Design optimization of a switched reluctance machine-based integrated starter/alternator for automotive applications (2016 Xxii International Conference on Electrical Machines). New York: Ieee, 2016, pp. 1577-1583.

[510]    M. Zaharia, C. Popescu, and C. Feniser, "The Structure of Active Population by Educational Levels before and after the Economic Crisis. Was it Influenced by the Crisis?," in 13th International Symposium in Management: Management During and after the Economic Crisis, vol. 221, G. Prostean, R. Seifert, and R. Pettinger, Eds. (Procedia Social and Behavioral Sciences, Amsterdam: Elsevier Science Bv, 2016, pp. 317-325.