# Jurnale ISI 2015

[1] U. Abel, V. Gupta, and M. Ivan, "A generalization of a combinatorial identity by Chang and Xu," Bulletin of Mathematical Sciences, vol. 5, pp. 511-516, Oct 2015.

[2] U. Abel, M. Ivan, and R. Paltanea, "The Durrmeyer variant of an operator defined by DD Stancu," Applied Mathematics and Computation, vol. 259, pp. 116-123, May 2015.

[3] S. Achimas, M. Borzan, F. Mocean, D. Pintea, and A. Trif, "MECHANICAL MODEL OF THE CUTTING PROCESS IN STEEL FACING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 73-80, Mar 2015.

[4] C. Aciu, D. L. Manea, C. Puia, and O. Cadar, "MORTARS FOR THE ENHANCEMENT OF THE INDOOR ENVIRONMENTAL QUALITY," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 45-54, Dec 2015.

[5] A. M. Acu, D. Barbosu, and D. F. Sofonea, "NOTE ON A q-ANALOGUE OF STANCU-KANTOROVICH OPERATORS," Miskolc Mathematical Notes, vol. 16, pp. 3-15, 2015.

[6] A. T. Alexandru, "Addendum modification of spur gears with equalized efficiency at the points where the meshing stars and ends," Mechanika, pp. 480-485, 2015.

[7] A. Andreica and C. Chira, "Evolution and dynamics of node-weighted networks for cellular automata computation," Logic Journal of the Igpl, vol. 23, pp. 400-409, Jun 2015.

[8] A. Andreica and C. Chira, "Best-order crossover for permutation-based evolutionary algorithms," Applied Intelligence, vol. 42, pp. 751-776, Jun 2015.

[9] T. A. Antal, "PROGRAMMING CANVAS X Pro 16 USING SCRIPTING TECHNOLOGIES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 151-156, Jun 2015.

[10] G. Arghir, "CONSTRUCTION OF THE REAL WING CLOSE TO THE IDEAL WING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 7-10, Mar 2015.

[11] A. Arman, S. Talu, C. Luna, A. Ahmadpourian, M. Naseri, and M. Molamohammadi, "Micromorphology characterization of copper thin films by AFM and fractal analysis," Journal of Materials Science-Materials in Electronics, vol. 26, pp. 9630-9639, Dec 2015.

[12] A. Badiu, I. Badiu, and M. Dragomir, "STUDIES REGARDING THE USE OF RECLAIMED WOOD IN THE MANUFACTURE OF MODERN FURNITURE - PART I," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 225-230, Jun 2015.

[13] A. Badiu, I. Badiu, and M. Dragomir, "STUDIES REGARDING THE USE OF RECLAIMED WOOD IN THE MANUFACTURE OF MODERN FURNITURE - PART II," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 231-238, Jun 2015.

[14] E. N. Bakatula, C. J. Straker, E. M. Cukrowska, I. M. Weiersbye, L. Mihaly-Cozmuta, and H. Tutu, "A zeoponic system modified with Penicillium simplicissimum for the removal of trace elements from aqueous solutions and gold mine leachates," Journal of Geochemical Exploration, vol. 156, pp. 34-43, Sep 2015.

[15] I. Barabas, "Liquid densities and excess molar volumes of ethanol plus biodiesel binary system between the temperatures 273.15 K and 333.15 K," Journal of Molecular Liquids, vol. 204, pp. 95-99, Apr 2015.

[16] D. Barbosu and C. V. Muraru, "Approximating B-continuous functions using GBS operators of Bernstein-Schurer-Stancu type based on q-integers," Applied Mathematics and Computation, vol. 259, pp. 80-87, May 2015.

[17] B. Belean, M. Borda, J. Ackermann, I. Koch, and O. Balacescu, "Unsupervised image segmentation for microarray spots with irregular contours and inner holes," Bmc Bioinformatics, vol. 16, Dec 2015.

[18] B. Belean, R. Terebes, and A. Bot, "Low-complexity PDE-based approach for automatic microarray image processing," Medical & Biological Engineering & Computing, vol. 53, pp. 99-110, Feb 2015.

[19] M. Belmeguenai, M. S. Gabor, T. Petrisor, F. Zighem, S. M. Cherif, and C. Tiusan, "Capping layer-tailored interface magnetic anisotropy in ultrathin Co2FeAl films," Journal of Applied Physics, vol. 117, Jan 2015.

[20] M. Belmeguenai, M. S. Gabor, Y. Roussigne, F. Zighem, S. M. Cherif, and C. Tiusan, "Perpendicular Magnetic Anisotropy in Co-2 FeAl Thin Films: Effect of Annealing Temperature," Ieee Transactions on Magnetics, vol. 51, Nov 2015.

[21] M. Belmeguenai, H. Tuzcuoglu, M. Gabor, T. Petrisor, C. Tiusan, D. Berling, et al., "Magnetic and structural properties of Co2FeAl thin films grown on Si substrate," Journal of Magnetism and Magnetic Materials, vol. 373, pp. 140-143, Jan 2015.

[22] S. Berezina, A. A. Il'Icheva, L. I. Podzorova, and S. Talu, "Surface micromorphology of dental composites CE-TZP - Al2O3 with Ca+2 modifier," Microscopy Research and Technique, vol. 78, pp. 840-846, Sep 2015.

[23] V. Berinde and M. A. Petric, "Fixed point theorems for cyclic non-self single-valued almost contractions," Carpathian Journal of Mathematics, vol. 31, pp. 289-296, 2015.

[24] C. Birleanu and M. Pustan, "Analysis of the adhesion effect in RF-MEMS switches using atomic force microscope," Analog Integrated Circuits and Signal Processing, vol. 82, pp. 571-581, Mar 2015.

[25] M. M. Birou, "A class of Markov type operators which preserve e(j), j >= 1," Applied Mathematics and Computation, vol. 250, pp. 1-11, Jan 2015.

[26] I. Blebea and C. G. Sopoian, "DETERMINATION OF RELIABILITY PARAMETERS IN COMPLEX TECHNICAL SYSTEMS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 157-164, Jun 2015.

[27] L. Bolundut, E. Culea, G. Borodi, R. Stefan, C. Munteanu, and P. Paseuta, "Influence of Sm3+:Ag codoping on structural and spectroscopic properties of lead tellurite glass ceramics," Ceramics International, vol. 41, pp. 2931-2939, Mar 2015.

[28] B. Bot, S. Emerich, S. Martoiu, and B. Belean, "FSL-based Hardware Implementation for Parallel Computation of cDNA Microarray Image Segmentation," International Journal of Advanced Computer Science and Applications, vol. 6, pp. 20-27, Jul 2015.

[29] A. I. Botean, D. S. Mandru, and M. Hardau, "PLAN MODEL TO ANALYZE THE STATE OF STRESSES AND STRAINS OF THE HUMAN PROXIMAL FEMORAL BONE," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 199-204, Jun 2015.

[30] A. Botezan, R. Tirnovan, R. Munteanu, A. Graur, and D. Rafiroiu, "Hysteresis Current Control of the Single-Phase Voltage Source Inverter Using eMEGAsim Real-Time Simulator," Advances in Electrical and Computer Engineering, vol. 15, pp. 99-104, 2015.

[31] G. Buda, A. Samuila, M. Bilici, S. Atroune, and L. Dascalescu, "Set-Point Identification and Robustness Testing of a Triboelectrostatic Separation Process for Mixed Granular Plastics," Ieee Transactions on Industry Applications, vol. 51, pp. 1153-1160, Mar-Apr 2015.

[32] Z. Buna, I. Badiu, and A. Eles, "ON USING PARAMETRIC MODELING IN FURNITURE DESIGN," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 239-244, Jun 2015.

[33] A. Buzatu, G. Damian, H. G. Dill, N. Buzgar, and A. I. Apopei, "Mineralogy and geochemistry of sulfosalts from Baia Sprie ore deposit (Romania) - New bismuth minerals occurrence," Ore Geology Reviews, vol. 65, pp. 132-147, Mar 2015.

[34] M. Calixto, J. Guerrero, and D. Rosca, "Wavelet transform on the torus: A group theoretical approach," Applied and Computational Harmonic Analysis, vol. 38, pp. 32-49, Jan 2015.

[35] A. Capata, "OPTIMALITY CONDITIONS FOR VECTOR EQUILIBRIUM PROBLEMS WITH SET-VALUED MAPPINGS AND CONE CONSTRAINTS," Mathematica Slovaca, vol. 65, pp. 683-696, Jun 2015.

[36] A. Capata, "OPTIMALITY CONDITIONS FOR STRONG VECTOR EQUILIBRIUM PROBLEMS UNDER A WEAK CONSTRAINT QUALIFICATION," Journal of Industrial and Management Optimization, vol. 11, pp. 563-574, Apr 2015.

[37] A. Cernat, M. Tertis, R. S. Andulescu, F. Bedioui, A. Cristea, and C. Cristea, "Electrochemical sensors based on carbon nanomaterials for acetaminophen detection: A review," Analytica Chimica Acta, vol. 886, pp. 16-28, Jul 2015.

[38] K. M. Chao, A. E. James, A. G. Nanos, J. H. Chen, S. D. Stan, I. Muntean, et al., "Cloud E-learning for Mechatronics: CLEM," Future Generation Computer Systems-the International Journal of Escience, vol. 48, pp. 46-59, Jul 2015.

[39] R. I. Chelcea, R. S. Sipos, R. Fechete, D. Moldovan, I. Sus, Z. Pavai, et al., "ONE-DIMENSIONAL LAPLACE SPECTROSCOPY USED FOR THE ASSESSMENT OF PORE-SIZE DISTRIBUTION ON THE OVARIECTOMIZED RATS FEMUR," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 57-70, Mar 2015.

[40] I. Chicinas, T. F. Marinca, F. Popa, and B. V. Neamtu, "Rhometal interface in pseudo-core shell powders like Permalloy/Rhometal type," Applied Surface Science, vol. 358, pp. 627-633, Dec 2015.

[41] A. Chioreanu, S. Brad, C. Porumb, and S. Porumb, "E-maintenance ontology-based approach for heterogeneous distributed robotic production capabilities," International Journal of Computer Integrated Manufacturing, vol. 28, pp. 200-212, Feb 2015.

[42] M. Cimpan and M. Arghir, "CORRECTIVE ACTION TO ELIMINATE THE DYNAMIC FAULTS OF ROTATING MACHINERY," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 81-86, Mar 2015.

[43] N. Cioica, R. Fechete, R. Chelcea, C. Cota, M. Todica, C. V. Pop, et al., "WATER ABSORPTION AND DEGRADATION OF PACKAGES BASED ON NATIVE CORN STARCH WITH PLASTICIZERS," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 45-55, Mar 2015.

[44] N. Cioica, R. Fechete, C. Filip, I. B. Cozar, C. Cota, and E. M. Nagy, "NMR AND SEM INVESTIGATION OF EXTRUDED NATIVE CORN STARCH WITH PLASTICIZERS," Romanian Journal of Physics, vol. 60, pp. 512-520, 2015.

[45] E. Ciupan, F. Lungu, and C. Ciupan, "ANN Training Method with a Small Number of Examples Used for Robots Control," International Journal of Computers Communications & Control, vol. 10, pp. 643-653, Oct 2015.

[46] A. Ciurte, S. Nedevschi, and I. Rasa, "Systems of nonlinear algebraic equations with unique solution," Numerical Algorithms, vol. 68, pp. 367-376, Feb 2015.

[47] D. Cocorean, C. Vaida, N. Plitea, and D. Pisla, "MODULAR DESIGN OF A PARALLEL ROBOTIC STRUCTURE FOR BRACHYTHERAPY," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 245-250, Jun 2015.

[48] A. C. Coman, D. A. Todea, F. Popa, T. Radu, O. Cadar, and C. Borzan, "Multilateral characterization of masks and tubes surfaces in contact with respiratory system through ventilation," Journal of Optoelectronics and Advanced Materials, vol. 17, pp. 1563-1571, Sep-Oct 2015.

[49] R. Comes and C. Neamtu, "DESIGN A LOW-COST EYEWEAR DISPLAY ADAPTED TO ADDITIVE MANUFACTURING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 563-566, Nov 2015.

[50] N. Cordos, M. Marinica, A. Todorut, and M. Balcau, "POSSIBILITIES OF CREATING AN ACCIDENTOLOGY DATABASE," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 205-212, Jun 2015.

[51] S. C. Cosma, A. V. Miron, and A. Radu, "ZYGOMATIC IMPLANTS MANUFACTURED BY SLM," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 251-256, Jun 2015.

[52] A. Cotetiu, R. Cotetiu, and N. Ungureanu, "COMPARATIVE STUDY BETWEEN THE ALTERNATIVE USED BY THE IMP TYPE PECUSSION DRILLS AND THE VERSION USING FLUID ELEMENTS REGARDING THE SUPPLYING, COMMAND AND AUTOMATIC ADJUSTMENT SYSTEMS OF THE INJECTION WATER PRESSURE," Archives of Mining Sciences, vol. 60, pp. 879-888, 2015.

[53] A. M. Cozmuta, A. Peter, L. M. Cozmuta, C. Nicula, L. Crisan, L. Baia, et al., "Active Packaging System Based on Ag/TiO2 Nanocomposite Used for Extending the Shelf Life of Bread. Chemical and Microbiological Investigations," Packaging Technology and Science, vol. 28, pp. 271-284, Apr 2015.

[54] A. M. Cozmuta, A. Turila, R. Apjok, A. Ciocian, L. M. Cozmuta, A. Peter, et al., "Preparation and characterization of improved gelatin films incorporating hemp and sage oils," Food Hydrocolloids, vol. 49, pp. 144-155, Jul 2015.

[55] I. Craciun, D. Inoan, D. Popa, and L. Tudose, "Generalized Golden Ratios defined by means," Applied Mathematics and Computation, vol. 250, pp. 221-227, Jan 2015.

[56] I. Craciun, F. Rusu, and L. Tudose, "AESTHETIC OPTIMIZATION OF A BASIC SHAPE," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 257-262, Jun 2015.

[57] M. Cretu, A. Darabant, and R. V. Ciupa, "Magnetic Stimulation of the Spinal Cord: Evaluating the Characteristics of an Appropriate Stimulator," Artificial Organs, vol. 39, pp. 841-848, Oct 2015.

[58] M. Cretu and D. D. Micu, "Improved coil design for repetitive magnetic stimulation of the spinal cord," Compel-the International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 34, pp. 1043-1053, 2015.

[59] C. Croitoru, I. Nastase, F. Bode, A. Meslem, and A. Dogeanu, "Thermal comfort models for indoor spaces and vehicles-Current capabilities and future perspectives," Renewable & Sustainable Energy Reviews, vol. 44, pp. 304-318, Apr 2015.

[60] A. Cuibus, C. Cosma, L. E. Muntean, and Z. Kiss, "EXPERIMENTAL STUDIES ON THE RADIOACTIVITY AND EXHALATION RATE OF SEVERAL CONCRETE MIXTURES WITH ADDITIONS," Romanian Journal of Physics, vol. 60, pp. 1183-1192, 2015.

[61] E. N. Culea, P. Pascuta, M. Pustan, D. R. Tamas-Gavrea, L. Pop, and I. Vida-Simiti, "Effects of Eu:Ag codoping on structural, magnetic and mechanical properties of lead tellurite glass ceramics," Journal of Non-Crystalline Solids, vol. 408, pp. 18-25, Jan 2015.

[62] R. Curta, Z. Buna, M. Dragomir, R. Comes, and D. Banyai, "METHODOLOGY AND CASE STUDY IN THE FURNITURE INDUSTRY USING PHOTOGRAMMETRY AND 5 AXIS MACHINING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 53-58, Mar 2015.

[63] R. Curtean, R. Gavrila, and I. Lupea, "ESTIMATION OF HARMONIC RESPONSE CONSIDERING THE TRANSFER FUNCTION RESULTED FROM FEA ANALYSIS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 567-570, Nov 2015.

[64] C. Czech, P. Guarneri, N. Thyagaraja, and G. Fadel, "Systematic Design Optimization of the Metamaterial Shear Beam of a Nonpneumatic Wheel for Low Rolling Resistance," Journal of Mechanical Design, vol. 137, Apr 2015.

[65] D. Dadarlat, M. Streza, O. Onija, C. Prejmerean, L. Silaghi-Dumitrescu, N. Cobirzan, et al., "Complementary photothermal techniques for complete thermal characterization of porous and semi-transparent solids," Journal of Thermal Analysis and Calorimetry, vol. 119, pp. 301-308, Jan 2015.

[66] M. B. Decebal and L. A. Pop, "SOME ASPECTS ON LEGAL OBLIGATIONS AND RIGHTS DECONTAMINATING AND CLEANING ACTIVE AREAS OF BAD PRIVATISED STATE ENTERPRISES," Journal of Environmental Protection and Ecology, vol. 16, pp. 1534-1542, 2015.

[67] A. Dehelean, A. Popa, S. Rada, and E. Culea, "EPR and magnetic characterization of Fe2O3-TeO2 and CuO-TeO2 glasses obtained by melt quenching and sol-gel processes," Journal of Magnetism and Magnetic Materials, vol. 381, pp. 131-137, May 2015.

[68] O. A. Detesan, "THE GEOMETRIC AND KINEMATIC MODEL OF RTTRR SMALL-SIZED MODULAR ROBOT," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 513-518, Nov 2015.

[69] O. A. Detesan, "THE NUMERICAL SIMULATION OF TRR SMALL-SIZED ROBOT," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 519-524, Nov 2015.

[70] T. Dippong, E. A. Levei, G. Borodi, F. Goga, and L. B. Tudoran, "Influence of Co/Fe ratio on the oxide phases in nanoparticles of CoxFe3-xO4," Journal of Thermal Analysis and Calorimetry, vol. 119, pp. 1001-1009, Feb 2015.

[71] T. Dippong, E. A. Levei, L. Diamandescu, I. Bibicu, C. Leostean, G. Borodi, et al., "Structural and magnetic properties of CoxFe3-xO4 versus Co/Fe molar ratio," Journal of Magnetism and Magnetic Materials, vol. 394, pp. 111-116, Nov 2015.

[72] J. Domokos, O. Buza, and G. Toderean, "Romanian phonetic transcription dictionary for speeding up language technology development," Language Resources and Evaluation, vol. 49, pp. 311-325, Jun 2015.

[73] D. Dubina, V. Ungureanu, and L. Gilia, "Experimental investigations of cold-formed steel beams of corrugated web and built-up section for flanges," Thin-Walled Structures, vol. 90, pp. 159-170, May 2015.

[74] E. H. Dulf, F. V. Dulf, and C. I. Muresan, "Fractional Model of the Cryogenic (C-13) Isotope Separation Column," Chemical Engineering Communications, vol. 202, pp. 1600-1606, 2015.

[75] F. V. Dulf, D. C. Vodnar, E. H. Dulf, and M. I. Tosa, "Total Phenolic Contents, Antioxidant Activities, and Lipid Fractions from Berry Pomaces Obtained by Solid-State Fermentation of Two Sambucus Species with Aspergillus niger," Journal of Agricultural and Food Chemistry, vol. 63, pp. 3489-3500, Apr 2015.

[76] A. Duluard, C. Bellouard, Y. Lu, M. Hehn, D. Lacour, F. Montaigne, et al., "Enhanced magnetoresistance by monoatomic roughness in epitaxial Fe/MgO/Fe tunnel junctions," Physical Review B, vol. 91, May 2015.

[77] D. Elenkova, J. Zaharieva, M. Getsova, I. Manolov, M. Milanova, S. Stach, et al., "Morphology and Optical Properties of SiO2-Based Composite Thin Films with Immobilized Terbium(III) Complex with a Biscoumarin Derivative," International Journal of Polymer Analysis and Characterization, vol. 20, pp. 42-56, Jan 2015.

[78] R. Enache and A. Crisan, "Teacher skills developed in training programs," Journal of Educational Sciences & Psychology, vol. 5, pp. 18-23, 2015.

[79] V. Estrada-Manzo, Z. Lendek, T. M. Guerra, and P. Pudlo, "Controller Design for Discrete-Time Descriptor Models: A Systematic LMI Approach," Ieee Transactions on Fuzzy Systems, vol. 23, pp. 1608-1621, Oct 2015.

[80] R. Etz, D. Petreus, T. Frentiu, T. Patarau, and C. Orian, "An Indirect Method and Equipment for Temperature Monitoring and Control," Advances in Electrical and Computer Engineering, vol. 15, pp. 87-94, 2015.

[81] P. Farago, C. Farago, G. Oltean, and S. Hintea, "An Electronically Tunable Transconductance Amplifier for Use in Auditory Prostheses," Advances in Electrical and Computer Engineering, vol. 15, pp. 95-100, 2015.

[82] V. Farcas, N. Ilies, and R. Cot, "CO2 AND ENERGY FOOTPRINT OF DIFFERENT RETAINING WALLS SOLUTIONS. MASONRY RETAINING WALL vs. CANTILEVER RETAINING WALL," Environmental Engineering and Management Journal, vol. 14, pp. 1323-1326, Jun 2015.

[83] S. C. Folea and G. Mois, "A Low-Power Wireless Sensor for Online Ambient Monitoring," Ieee Sensors Journal, vol. 15, pp. 742-749, Feb 2015.

[84] T. Frentiu, S. Butaciu, E. Darvasi, M. Ponta, M. Senila, D. Petreus, et al., "Analytical characterization of a method for mercury determination in food using cold vapour capacitively coupled plasma microtorch optical emission spectrometry - compliance with European legislation requirements," Analytical Methods, vol. 7, pp. 747-752, 2015.

[85] T. Frentiu, S. Butaciu, M. Ponta, M. Senila, E. Darvasi, M. Frentiu, et al., "Determination of Total Mercury in Fish Tissue Using a Low-Cost Cold Vapor Capacitively Coupled Plasma Microtorch Optical Emission Microspectrometer: Comparison with Direct Mercury Determination by Thermal Decomposition Atomic Absorption Spectrometry," Food Analytical Methods, vol. 8, pp. 643-648, Mar 2015.

[86] T. Frentiu, E. Darvasi, S. Butaciu, M. Ponta, D. Petreus, R. Etz, et al., "Application of low-cost electrothermal vaporization capacitively coupled plasma microtorch optical emission spectrometry for simultaneous determination of Cd and Pb in environmental samples," Microchemical Journal, vol. 121, pp. 192-198, Jul 2015.

[87] L. Frosini, C. Harlisca, and L. Szabo, "Induction Machine Bearing Fault Detection by Means of Statistical Processing of the Stray Flux Measurement," Ieee Transactions on Industrial Electronics, vol. 62, pp. 1846-1854, Mar 2015.

[88] L. G. Fulea, V. Bocanet, M. Bulgaru, and M. Borzan, "CONTRIBUTIONS REGARDING THE FMEA ANALYSIS OF A CMM MEASURING PROCESS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 59-66, Mar 2015.

[89] M. Fulea, G. Sandru, S. Brad, and M. Maftei, "A NEW ENTREPRENEURIAL DECISION-MAKING SUPPORT FRAMEWORK FOR ASSESSING BUSINESS LINE CORRELATIONS," Amfiteatru Economic, vol. 17, pp. 1198-1212, Nov 2015.

[90] M. Fulea, C. Tanaselea, B. Mocan, and M. Murar, "ALGORITHM FOR AUTOMATICALLY GENERATING THE ROBOT PROGRAM FOR A RECONFIGURABLE PALLETISING APPLICATION," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 579-584, Nov 2015.

[91] O. Furdui, "The evaluation of a class of fractional part integrals," Integral Transforms and Special Functions, vol. 26, pp. 635-641, Aug 2015.

[92] O. Furdui, "A Stirling Integral," American Mathematical Monthly, vol. 122, pp. 290-291, Mar 2015.

[93] O. Furdui and A. Sintamarian, "Quadratic series involving the tail of zeta(k)," Integral Transforms and Special Functions, vol. 26, pp. 1-8, Jan 2015.

[94] M. S. Gabor, M. Belmeguenai, T. Petrisor, C. Ulhaq-Bouillet, S. Colis, and C. Tiusan, "Correlations between structural, electronic transport, and magnetic properties of Co2FeAl0.5Si0.5 Heusler alloy epitaxial thin films," Physical Review B, vol. 92, Aug 2015.

[95] M. S. Gabor, T. Petrisor, O. Pop, S. Colis, and C. Tiusan, "Temperature dependence of the perpendicular magnetic anisotropy in Ta/Co2FeAl/MgO structures probed by Anomalous Hall Effect," Journal of Magnetism and Magnetic Materials, vol. 392, pp. 79-82, Oct 2015.

[96] A. I. Gal, L. Vladareanu, and R. I. Munteanu, "SLIDING MOTION CONTROL WITH BOND GRAPH MODELING APPLIED ON A ROBOT LEG," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 60, pp. 215-224, Apr-Jun 2015.

[97] B. Gavrea, "A MEAN VALUE THEOREM FOR THE CHEBYSHEV FUNCTIONAL," Mathematical Inequalities & Applications, vol. 18, pp. 751-757, Apr 2015.

[98] B. Gavrea, "A Hermite-Hadamard type inequality with applications to the estimation of moments of continuous random variables," Applied Mathematics and Computation, vol. 254, pp. 92-98, Mar 2015.

[99] I. Gavrea and M. Ivan, "On the rate of convergence of discretely defined operators," Journal of Mathematical Analysis and Applications, vol. 432, pp. 129-133, Dec 2015.

[100] I. Gavrea and M. Ivan, "The Bernstein Voronovskaja-type theorem for positive linear approximation operators," Journal of Approximation Theory, vol. 192, pp. 291-296, Apr 2015.

[101] I. Gavrea and M. Ivan, "A sharp estimate for the Peano error representation," Applied Mathematics and Computation, vol. 252, pp. 14-19, Feb 2015.

[102] J. Gawad, D. Banabic, A. Van Bael, D. S. Comsa, M. Gologanu, P. Eyckens, et al., "An evolving plane stress yield criterion based on crystal plasticity virtual experiments," International Journal of Plasticity, vol. 75, pp. 141-169, Dec 2015.

[103] G. Gherasim, G. Thalmaier, N. Sechel, S. Suta, I. Vida-Simiti, B. Neamtu, et al., "RESEARCHES ON OBTAINING SINTERED Al80Fe10Ti10 FOAMS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 585-590, Nov 2015.

[104] H. Gonska, I. Rasa, and E. D. Stanila, "Power series of the operators," Positivity, vol. 19, pp. 237-249, Jun 2015.

[105] N. Gougoulias, L. Giurgiulescu, D. Kalfountzos, A. Papachatzis, I. Vagelas, D. Ftakas, et al., "COIR EMPLOYED AS SOILLESS CULTIVATION SUBSTRATE AND ITS INTERFERENCE WITH NUTRIENT SOLUTION DURING TWO TOMATOES CROPPING PERIODES (CASE STUDY)," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 177-185, Jun 2015.

[106] N. Gougoulias, P. Vyrlas, L. Giurgiulescu, D. Kalfountzos, and F. Eugenia, "EVALUATION OF POLYPHENOLS CONTENT AND ANTIOXIDANT ACTIVITY OF TWO TABLE GRAPE VARIETIES UNDER ENVIRONMENTAL CONDITIONS OF THESSALY," Carpathian Journal of Food Science and Technology, vol. 7, pp. 119-125, 2015.

[107] T. M. Guerra, V. Estrada-Manzo, and Z. Lendek, "Observer design for Takagi-Sugeno descriptor models: An LMI approach," Automatica, vol. 52, pp. 154-159, Feb 2015.

[108] M. Gueye, F. Zighem, M. Belmeguenai, M. S. Gabor, C. Tiusan, and D. Faurie, "Effective 90-degree magnetization rotation in Co2FeAl thin film/piezoelectric system probed by microstripline ferromagnetic resonance," Applied Physics Letters, vol. 107, Jul 2015.

[109] S. Gutoiu, O. Isnard, I. Chicinas, F. Popa, A. Takacs, and V. Pop, "The influence of milling and annealing conditions on the structural and magnetic behavior of Nd2Fe14B/alpha-Fe hard/soft magnetic nanocomposites," Journal of Alloys and Compounds, vol. 646, pp. 859-865, Oct 2015.

[110] H. Harmens, D. A. Norris, K. Sharps, G. Mills, R. Alber, Y. Aleksiayenak, et al., "Heavy metal and nitrogen concentrations in mosses are declining across Europe whilst some "hotspots" remain in 2010," Environmental Pollution, vol. 200, pp. 93-104, May 2015.

[111] Y. Q. He, Q. Lu, and G. Liviu, "Effects of extraction processes on the antioxidant activity of apple polyphenols," Cyta-Journal of Food, vol. 13, pp. 603-606, Oct 2015.

[112] A. Holhos, "Uniform approximation of functions by Bernstein-Stancu operators," Carpathian Journal of Mathematics, vol. 31, pp. 205-212, 2015.

[113] A. C. Hosu, Z. I. Kiss, I. A. Ivanciu, M. Varga, and Z. A. Polgar, "Integrated ubiquitous connectivity and centralised information platform for intelligent public transportation systems," Iet Intelligent Transport Systems, vol. 9, pp. 573-581, Aug 2015.

[114] A. Ilea, A. Cristea, C. M. Dudescu, L. Hurubeanu, C. Vajaean, S. Albu, et al., "Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis," Neuropediatrics, vol. 46, pp. 242-247, Aug 2015.

[115] L. Ilea, L. Munteanu, D. Dumitriu, M. Dudescu, C. Brisan, and V. Chiroiu, "ASPECTS OF GENERATING 3D SURFACES WITH APPLICATIONS IN DRIVING SIMULATORS," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 16, pp. 531-538, Oct-Dec 2015.

[116] N. Ilies, V. Farcas, C. Gherman, V. Chiorean, and D. Popa, "SOILS EFFICIENT IMPROVEMENT SOLUTIONS WITH WASTE MATERIALS AND BINDERS," Journal of Environmental Protection and Ecology, vol. 16, pp. 1397-1406, 2015.

[117] C. Ionescu and C. Muresan, "SLIDING MODE CONTROL FOR A CLASS OF SUB-SYSTEMS WITH FRACTIONAL ORDER VARYING TRAJECTORY DYNAMICS," Fractional Calculus and Applied Analysis, vol. 18, pp. 1441-1451, Dec 2015.

[118] D. Ionita, M. Cristea, and D. Banabic, "Viscoelastic behavior of PMMA in relation to deformation mode," Journal of Thermal Analysis and Calorimetry, vol. 120, pp. 1775-1783, Jun 2015.

[119] D. Ionita, C. Gaina, M. Cristea, and D. Banabic, "Tailoring the hard domain cohesiveness in polyurethanes by interplay between the functionality and the content of chain extender," Rsc Advances, vol. 5, pp. 76852-76861, 2015.

[120] C. Ivan and R. Popa, "A Cloud Based Mobile Dispatching System with Built-in Social CRM Component: Design and Implementation," Computers, vol. 4, pp. 176-214, Sep 2015.

[121] M. Ivan, "A note on the Hermite interpolation," Numerical Algorithms, vol. 69, pp. 517-522, Jul 2015.

[122] M. I. Jaffar, W. H. W. Badaruzzaman, M. M. A. Abdullah, S. Baharom, L. M. Moga, and A. V. Sandu, "Relationship Between Panel Stiffness and Mid-span Deflection in Profiled Steel Sheeting Dry Board with Geopolymer Concrete Infill," Materiale Plastice, vol. 52, pp. 243-248, Jun 2015.

[123] L. Jantschi and S. D. Bolboaca, "Distribution on Contingency of Alignment of Two Literal Sequences Under Constrains," Acta Biotheoretica, vol. 63, pp. 55-69, Mar 2015.

[124] L. Jantschi, L. L. Pruteanu, A. C. Cozma, and S. D. Bolboaca, "Inside of the Linear Relation between Dependent and Independent Variables," Computational and Mathematical Methods in Medicine, 2015.

[125] R. Jeler, F. Rusu, and R. Balan, "COMFORT INDEX CALCULATION USING ARTIFICIAL NEURAL NETWORKS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 263-266, Jun 2015.

[126] D. I. Julean, "Reportage: Romania and its Jewish museums," East European Jewish Affairs, vol. 45, pp. 279-289, Sep 2015.

[127] A. G. Jumolea and G. Arghir, "MECHANICAL PROPERTIES OF Al-Si COMPOSITE MATERIALS OBTAINED BY STIR CASTING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 591-596, Nov 2015.

[128] A. Kami, B. M. Dariani, A. S. Vanini, D. S. Comsa, and D. Banabic, "Numerical determination of the forming limit curves of anisotropic sheet metals using GTN damage model," Journal of Materials Processing Technology, vol. 216, pp. 472-483, Feb 2015.

[129] Z. I. Kiss, Z. A. Polgar, M. P. Stef, and V. Bota, "Improving transmission reliability in wireless sensor networks using network coding," Telecommunication Systems, vol. 59, pp. 509-521, Aug 2015.

[130] A. Kozuk and P. Berce, "MATHEMATICAL MODELING OF A CNC MACHINE STRUCTURE WITH 3+2 AXIS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 87-92, Mar 2015.

[131] A. Kozuk and P. Berce, "PERFORMANCE COMPARISION BETWEEN 3 AND 3+2 AXIS MACHINING CAPABILITIES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 93-96, Mar 2015.

[132] C. Lapusan, R. Balan, C. Rad, and A. Plesa, "DEVELOPMENT OF A MULTI-ROOM BUILDING THERMAL MODEL FOR USE IN THE DESIGN PROCESS OF ENERGY MANAGEMENT SYSTEMS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 41-48, Mar 2015.

[133] S. Laszlo and A. Viorel, "GENERALIZED MONOTONE OPERATORS ON DENSE SETS," Numerical Functional Analysis and Optimization, vol. 36, pp. 901-929, Jul 2015.

[134] S. Laszlo and A. Viorel, "Densely Defined Equilibrium Problems," Journal of Optimization Theory and Applications, vol. 166, pp. 52-75, Jul 2015.

[135] I. Lazar, J. Kalmar, A. Peter, A. Szilagyi, E. Gyori, T. Ditroi, et al., "Photocatalytic performance of highly amorphous titania-silica aerogels with mesopores: The adverse effect of the in situ adsorption of some organic substrates during photodegradation," Applied Surface Science, vol. 356, pp. 521-531, Nov 2015.

[136] D. Laze, G. Achimas, and I. T. Zelea, "MAINTENANCE OF THE BRAKE SISTEMS IN THE COMMERCIAL VEHICLES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 267-272, Jun 2015.

[137] A. Lehmann, G. Giuliani, E. Mancosu, K. C. Abbaspour, S. Soezen, D. Gorgan, et al., "Filling the gap between Earth observation and policy making in the Black Sea catchment with enviroGRIDS," Environmental Science & Policy, vol. 46, pp. 1-12, Feb 2015.

[138] Z. Lendek, T. M. Guerra, and J. Lauber, "Controller Design for TS Models Using Delayed Nonquadratic Lyapunov Functions," Ieee Transactions on Cybernetics, vol. 45, pp. 453-464, Mar 2015.

[139] D. Leordean, C. Dudescu, T. Marcu, P. Berce, and N. Balc, "Customized implants with specific properties, made by selective laser melting," Rapid Prototyping Journal, vol. 21, pp. 98-104, 2015.

[140] D. Leordean, S. A. Radu, D. Fratila, and P. Berce, "Studies on design of customized orthopedic endoprostheses of titanium alloy manufactured by SLM," International Journal of Advanced Manufacturing Technology, vol. 79, pp. 905-920, Jul 2015.

[141] Q. Lu and G. Liviu, "EXTRACTION OPTIMIZATION OF PECTIN FROM FRESH CITRUS PEEL WITH RESPONSE SURFACE METHODOLOGY," Carpathian Journal of Food Science and Technology, vol. 7, pp. 17-25, 2015.

[142] O. Lucaciu, B. Crisan, L. Crisan, M. Baciut, O. Soritau, S. Bran, et al., "In quest of optimal drug-supported and targeted bone regeneration in the cranio facial area: a review of techniques and methods," Drug Metabolism Reviews, vol. 47, pp. 455-469, Oct 2015.

[143] C. Lungoci, D. Moga, V. Muresan, D. Petreus, N. Stroia, R. Moga, et al., "Hyperthermic Intraperitoneal Chemotherapy Approach Based on Cyber-Physical System Paradigm," Control Engineering and Applied Informatics, vol. 17, pp. 50-59, Sep 2015.

[144] N. Lungu and S. A. Ciplea, "Ulam-Hyers-Rassias stability of pseudoparabolic partial differential equations," Carpathian Journal of Mathematics, vol. 31, pp. 233-240, 2015.

[145] I. Lupea, "A LUMPED MASS EXHAUST SYSTEM MODEL," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 509-512, Nov 2015.

[146] M. Lupsor-Platon, C. Vicas, S. Nedevschi, H. Stefanescu, C. Radu, D. Crisan, et al., "THE USE OF THE ATTENUATION COEFFICIENT COMPUTED ON THE ULTRASONIC IMAGE COULD IMPROVE THE SPECIFICITY OF THE CLASSICAL ULTRASONOGRAPHIC EXAMINATION FOR THE ASSESSMENT OF STEATOSIS GRADE IN DIFFUSE LIVER DISEASES PATIENTS," Journal of Hepatology, vol. 62, pp. S720-S720, Apr 2015.

[147] D. Maier, L. Anastasiu, R. Sarbu, and T. Eidenmuller, "MEASURING THE CAPACITY OF ORGANIZATIONS INNOVATION-MAJOR PROCESS OF INNOVATION MANAGEMENT," Amfiteatru Economic, vol. 17, pp. 1156-1166, Nov 2015.

[148] S. Manzetti and F. Mariasiu, "Electric vehicle battery technologies: From present state to future systems," Renewable & Sustainable Energy Reviews, vol. 51, pp. 1004-1012, Nov 2015.

[149] D. Marian, I. R. Peter, and C. Pintea, "A class of generalized monotone operators," Journal of Mathematical Analysis and Applications, vol. 421, pp. 1827-1843, Jan 2015.

[150] F. Mariasiu, "Numerical Investigation of the Effects of Biofuel Characteristics on the Injector Nozzle Erosion Process," Tribology & Lubrication Technology, vol. 71, pp. 44-+, Feb 2015.

[151] F. Mariasiu, N. V. Burnete, D. Moldovanu, B. O. Varga, C. Iclodean, and L. Kocsis, "EFFECTS OF BIOETHANOL ULTRASONIC GENERATED AEROSOLS APPLICATION ON DIESEL ENGINE PERFORMANCES," Thermal Science, vol. 19, pp. 1931-1941, 2015.

[152] T. F. Marinca, H. F. Chicinas, B. V. Neamtu, O. Isnard, and I. Chicinas, "Structural, thermal and magnetic characteristics of Fe3O4/Ni3Fe composite powder obtained by mechanosynthesis-annealing route," Journal of Alloys and Compounds, vol. 652, pp. 313-321, Dec 2015.

[153] T. F. Marinca, I. Chicinas, O. Isnard, and B. V. Neamtu, "Nanocrystalline/nanosized Fe3O4 particles obtained by heat treatment and mechanical milling," Optoelectronics and Advanced Materials-Rapid Communications, vol. 9, pp. 730-733, May-Jun 2015.

[154] K. Marton and A. Suciu, "TOWARDS A METHODOLOGY FOR RANDOMNESS ASSESSMENT: CHALLENGES AND PITFALLS," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 16, pp. 385-394, 2015.

[155] C. Marutoiu, I. Bratu, A. M. Budu, G. Santa, O. F. Marutoiu, C. Neamtu, et al., "Evaluation of Conservation State by Analysis of Imperial Gates' Constituent Materials Belonging to A Aschileu Mic Wooden Church, Cluj County," Revista De Chimie, vol. 66, pp. 992-996, Jul 2015.

[156] O. Matei, P. C. Pop, J. L. Sas, and C. Chira, "An improved immigration memetic algorithm for solving the heterogeneous fixed fleet vehicle routing problem," Neurocomputing, vol. 150, pp. 58-66, Feb 2015.

[157] K. Mathe and L. Busoniu, "Vision and Control for UAVs: A Survey of General Methods and of Inexpensive Platforms for Infrastructure Inspection," Sensors, vol. 15, pp. 14887-14916, Jul 2015.

[158] A. Mendez, Y. Reyes, G. Trejo, K. Stepien, and S. Talu, "Micromorphological Characterization of Zinc/Silver Particle Composite Coatings," Microscopy Research and Technique, vol. 78, pp. 1082-1089, Dec 2015.

[159] V. Merie, M. Pustan, G. Negrea, and C. Birleanu, "Research on titanium nitride thin films deposited by reactive magnetron sputtering for MEMS applications," Applied Surface Science, vol. 358, pp. 525-532, Dec 2015.

[160] A. Mesaros, R. B. Mos, M. Nasui, T. Petrisor, D. Toloman, O. R. Vasile, et al., "Insights into the europium-doped yttrium oxalate thermal decomposition mechanism," Journal of Analytical and Applied Pyrolysis, vol. 116, pp. 96-101, Nov 2015.

[161] A. Mesaros, D. Toloman, M. Nasui, R. B. Mos, T. Petrisor, B. S. Vasile, et al., "A valence states approach for luminescence enhancement by low dopant concentration in Eu-doped ZnO nanoparticles," Journal of Materials Science, vol. 50, pp. 6075-6086, Sep 2015.

[162] T. Micu, D. Micu, and D. Stet, "A GEOMETRICAL METHOD FOR CONDUCTING SPHERES IN ELECTROSTATIC FIELD," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 60, pp. 345-354, Oct-Dec 2015.

[163] C. S. Miron-Borzan, M. C. Dudescu, K. Abd Elghany, V. Ceclan, and P. Berce, "Analysis of Mechanical Proprieties of Selective Laser Sintered Polyamide Parts Obtained on Different Equipment," Materiale Plastice, vol. 52, pp. 39-42, Mar 2015.

[164] F. Mocean, G. Achimas, P. Bere, and S. Achimas, "THE MECHANICAL CHARACTERISTICS OF COMPOSITE MATERIALS USED FOR THE REHABILITATION OF CANALS BY MEANS OF LINING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 97-104, Mar 2015.

[165] M. Moldovan, D. Prodan, V. Popescu, C. Prejmerean, C. Sarosi, M. Saplontai, et al., "Structural and morphological properties of HA-ZnO powders prepared for biomaterials," Open Chemistry, vol. 13, pp. 725-733, Jan 2015.

[166] M. S. Moldovan, "Pilgrimage and Its Infrastructure in Post-communist Transylvania," Transylvanian Review, vol. 24, pp. 70-84, Fal 2015.

[167] A. Molea, V. Popescu, and N. A. Rowson, "A comparative study of the photo-catalytic performance of amorphous and nano-crystalline TiO2," Optoelectronics and Advanced Materials-Rapid Communications, vol. 9, pp. 431-435, Mar-Apr 2015.

[168] A. Molea, V. Popescu, N. A. Rowson, I. Cojocaru, A. Dinescu, A. Dehelean, et al., "Correlation of Physicochemical Properties with the Catalytic Performance of Fe-Doped Titanium Dioxide Powders," Industrial & Engineering Chemistry Research, vol. 54, pp. 7346-7351, Aug 2015.

[169] R. B. Mos, M. Nasui, T. Petrisor, A. Mesaros, L. Ciontea, and T. Petrisor, "The thermal decomposition of metal-organic precursors for epitaxial growth of SrZrO3 thin films," Journal of Analytical and Applied Pyrolysis, vol. 115, pp. 255-261, Sep 2015.

[170] S. C. Mosneag, V. Popescu, C. Neamtu, and G. Borodi, "Study on the removal of nitrate in groundwater from Capus, Cluj county by natural zeolite of Mirsid and granular activated carbon," Desalination and Water Treatment, vol. 56, pp. 3313-3322, Dec 2015.

[171] A. Muntean, I. Smical, and E. Nour, "The Influence of the Weather and Climatic Conditions and some Hydrological and Chemical Characteristics of the Some. River, in the NW part of Romania," Geographica Pannonica, vol. 19, pp. 1-8, Mar 2015.

[172] D. F. Muntean, I. Ivan, and L. Muresan, "ENVIRONMENTAL IMPLICATIONS CONCERNING THE CHEMICAL COMPOSITION AND PARTICLE DISTRIBUTION OF ANTI - SKID MATERIAL," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 207-218, Jun 2015.

[173] M. Muntean, H. Valean, and L. Cabulea, "Improving classification with IF-THEN rules for multidimensional datasets," Control Engineering and Applied Informatics, vol. 17, pp. 42-49, Dec 2015.

[174] L. Munteanu, V. Chiroiu, C. Brisan, D. Dumitriu, T. Sireteanu, and S. Petre, "On the 3D normal tire/off-road vibro-contact problem with friction," Mechanical Systems and Signal Processing, vol. 54-55, pp. 377-393, Mar 2015.

[175] L. Munteanu, D. Dumitriu, V. Chiroiu, C. Brisan, M. Bara, and D. Marin, "On the Tactile Sensing Based on the Smart Materials," Cmc-Computers Materials & Continua, vol. 46, pp. 79-103, Mar 2015.

[176] C. I. Muresan, E. H. Dulf, and R. Both, "Comparative Analysis of Different Control Strategies for a Train of Cryogenic C-13 Separation Columns," Chemical Engineering & Technology, vol. 38, pp. 619-631, Apr 2015.

[177] C. I. Muresan, C. Ionescu, S. Folea, and R. De Keyser, "Fractional order control of unstable processes: the magnetic levitation study case," Nonlinear Dynamics, vol. 80, pp. 1761-1772, Jun 2015.

[178] R. Muresan, "STUDY ON THE ACTIVATED SINTERING OF MECHANICALLY PROCESSED TUNGSTEN POWDERS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 195-198, Jun 2015.

[179] V. Muresan and A. S. Muresan, "On the theory of fixed point theorems for convex contraction mappings," Carpathian Journal of Mathematics, vol. 31, pp. 365-371, 2015.

[180] M. Nasui, T. Petrisor, R. B. Mos, M. S. Gabor, A. Mesaros, F. Goga, et al., "Fluorine-free propionate route for the chemical solution deposition of YBa2Cu3O7-x superconducting films," Ceramics International, vol. 41, pp. 4416-4421, Apr 2015.

[181] M. I. Neagu, L. Miclea, and S. Manich, "Improving security in cache memory by power efficient scrambling technique," Iet Computers and Digital Techniques, vol. 9, pp. 283-292, Nov 2015.

[182] B. V. Neamtu, T. F. Marinca, I. Chicinas, and O. Isnard, "Structural, magnetic and thermal characterization of amorphous FINEMET powders prepared by wet mechanical alloying," Journal of Alloys and Compounds, vol. 626, pp. 49-55, Mar 2015.

[183] B. V. Neamtu, T. F. Marinca, I. Chicinas, O. Isnard, and F. Popa, "Structural and magnetic characteristics of Co-based amorphous powders prepared by wet mechanical alloying," Advanced Powder Technology, vol. 26, pp. 323-328, Jan 2015.

[184] C. Neamtu, S. Bodi, R. A. Ghinea, and A. Papp, "FAILURE MODE AND EFFECT ANALYSIS FOR MOLD DESIGN," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 533-536, Nov 2015.

[185] C. Neamtu, R. Comes, R. Bolba, and R. A. Ghinea, "IMPROVING THE DESIGN OF PLASTIC ANCHORS FOR POLYSTYRENE," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 525-532, Nov 2015.

[186] I. Negrean, K. Kacso, and A. F. Cristea, "NEW FORMULATIONS ON THE ACCELERATION ENERGY OF FIRST AND SECOND ORDER APPLIED IN ANALYTICAL MECHANICS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 179-186, Jun 2015.

[187] I. Negrean, K. Kacso, and A. F. Cristea, "NEW FORMULATIONS ON THE ACCELERATION ENERGY OF SECOND AND THIRD ORDER APPLIED IN ANALYTICAL MECHANICS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 187-194, Jun 2015.

[188] M. Negru, S. Nedevschi, and R. I. Peter, "Exponential Contrast Restoration in Fog Conditions for Driving Assistance," Ieee Transactions on Intelligent Transportation Systems, vol. 16, pp. 2257-2268, Aug 2015.

[189] N. Neidoni and M. Buzdugan, "A REINFORCING METHOD OF CORRUGATED FIBERBOARD BOXES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 67-72, Mar 2015.

[190] R. Nemati-Chari, K. Dehghani, A. Kami, and D. Banabic, "APPLICATION OF RESPONSE SURFACE METHODOLOGY FOR STUDY OF EFFECTIVE STRAIN IN EQUAL CHANNEL ANGULAR PRESSING OF AA6061 ALLOY," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 16, pp. 217-225, Apr-Jun 2015.

[191] A. Novac and R. Precup, "VARIATIONAL PROPERTIES OF THE SOLUTIONS FOR SECOND-ORDER DIFFERENTIAL EQUATIONS AND SYSTEMS ON SEMI-LINE," Numerical Functional Analysis and Optimization, vol. 36, pp. 930-941, Jul 2015.

[192] S. Noveanu, N. Lobontiu, J. Lazaro, and D. Mandru, "Substructure compliance matrix model of planar branched flexure-hinge mechanisms: Design, testing and characterization of a gripper," Mechanism and Machine Theory, vol. 91, pp. 1-20, Sep 2015.

[193] M. Olaru, V. Dinu, T. Keppler, B. Mocan, and A. Mateiu, "STUDY ON THE OPEN INNOVATION PRACTICES IN ROMANIAN SMEs," Amfiteatru Economic, vol. 17, pp. 1129-1141, Nov 2015.

[194] S. Oniga and S. Jozsef, "Optimal Recognition Method of Human Activities Using Artificial Neural Networks," Measurement Science Review, vol. 15, pp. 323-327, Dec 2015.

[195] A. Paljanos, S. Miclaus, and C. Munteanu, "Occupational exposure of personnel operating military radio equipment: measurements and simulation," Electromagnetic Biology and Medicine, vol. 34, pp. 221-227, Jul 2015.

[196] V. G. Patai, G. Achimas, and G. Pintye, "STATIONARY GAS FLOW FROM A TANK," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 105-110, Mar 2015.

[197] A. Peter, L. Mihaly-Cozmuta, A. Mihaly-Cozmuta, C. Nicula, C. Cadar, A. Jastrzebska, et al., "Silver functionalized titania-silica xerogels: Preparation, morpho-structural and photocatalytic properties, kinetic modeling," Journal of Alloys and Compounds, vol. 648, pp. 890-902, Nov 2015.

[198] A. Peter, L. Mihaly-Cozmuta, A. Mihaly-Cozmuta, C. Nicula, A. Jastrzebska, P. Kurtycz, et al., "Morphology, structure, and photoactivity of two types of graphene oxide-TiO2 composites," Chemical Papers, vol. 69, pp. 839-855, Jun 2015.

[199] A. Peter, D. Tegla, L. Giurgiulescu, A. M. Cozmuta, C. Nicula, L. M. Cozmuta, et al., "DEVELOPMENT OF Ag/TiO2-SiO2-COATED FOOD PACKAGING FILM AND ITS ROLE IN PRESERVATION OF GREEN LETTUCE DURING STORAGE," Carpathian Journal of Food Science and Technology, vol. 7, pp. 88-96, 2015.

[200] C. M. Pintea, "A Unifying Survey of Agent-Based Approaches for Equality-Generalized Traveling Salesman Problem," Informatica, vol. 26, pp. 509-522, 2015.

[201] C. M. Pintea and P. C. Pop, "An improved hybrid algorithm for capacitated fixed-charge transportation problem," Logic Journal of the Igpl, vol. 23, pp. 369-378, Jun 2015.

[202] G. Pintye, G. Achimas, and G. Patai, "TECHNOLOGICAL ASPECTS ON GLASS ASSEMBLED BY GLUING ON THE METAL SUPPORT," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 111-118, Mar 2015.

[203] N. Plitea, A. Szilaghyi, and D. Pisla, "Kinematic analysis of a new 5-DOF modular parallel robot for brachytherapy," Robotics and Computer-Integrated Manufacturing, vol. 31, pp. 70-80, Feb 2015.

[204] A. Pop and I. Ardelean, "Monitoring the size evolution of capillary pores in cement paste during the early hydration via diffusion in internal gradients," Cement and Concrete Research, vol. 77, pp. 76-81, Nov 2015.

[205] A. Pop and M. S. Pop, "A GENERALIZATION OF HYERS-ULAM STABILITY ON m-SEMIGROUPS," Miskolc Mathematical Notes, vol. 16, pp. 407-421, 2015.

[206] D. Pop, "EXPERIENCING THE RELATIONSHIP BETWEEN ARCHITECTURAL SPACE AND THE MAJOR SPACE PHOBIAS," Urbanism Architecture Constructions, vol. 6, pp. 33-44, 2015.

[207] O. Pop, A. Abrudan, and I. Pop, "CLOSED EXPANSION VESSEL DIMENSIONING - PART III," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 137-144, Mar 2015.

[208] P. C. Pop, C. M. Pintea, C. P. Sitar, and M. Hajdu-Macelaru, "An efficient Reverse Distribution System for solving sustainable supply chain network design problem," Journal of Applied Logic, vol. 13, pp. 105-113, Jun 2015.

[209] S. Pop, D. Pitica, and V. Bande, "Analyzing a Vibrating Wire Transducer using Coupled Resonator Circuits," Advances in Electrical and Computer Engineering, vol. 15, pp. 87-92, 2015.

[210] S. I. Pop, M. Dudescu, D. C. Bratu, V. V. Merie, and M. Pacurar, "Effect of Esthetic Coating on the Load Deflection and Surface Characteristics of the NiTi Orthodontic Archwires," Revista De Chimie, vol. 66, pp. 364-367, Mar 2015.

[211] V. Pop, "PARTITIONS OF THE SET OF POSITIVE INTEGERS IN TRANSLATED SETS," Journal of Science and Arts, pp. 211-214, 2015.

[212] M. Popa, R. Bostan, N. Ilie, and S. Varvara, "NATURAL SORBENTS USED FOR THE REMOVAL OF HEAVY METALS FROM ACIDIC WASTEWATERS GENERATED AT `VALEA SESEI' TAILING POND FROM ROSIA POENI MINING PERIMETER (ROMANIA)," Journal of Environmental Protection and Ecology, vol. 16, pp. 839-849, 2015.

[213] D. Popescu, F. Popister, A. Eles, and R. Comes, "IMPROVING THE QUALITY OF PLASTIC PARTS OBTAINED BY 3D PRINTING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 25-30, Mar 2015.

[214] G. L. Popescu, N. Filip, A. Molea, and V. Popescu, "THE EFFECT OF USING PYROLYSIS OILS FROM POLYETHYLENE AND DIESEL ON THE POLLUTANT EMISSIONS FROM A SINGLE CYLINDER DIESEL ENGINE," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 273-288, Dec 2015.

[215] T. Popescu, A. C. Kacso, D. Pisla, and G. Kacso, "Brachytherapy next generation: robotic systems," Journal of Contemporary Brachytherapy, vol. 7, pp. 510-514, Nov-Dec 2015.

[216] V. Popescu, A. Molea, A. Dinescu, C. Rusu-Trisca, M. Moldovan, and G. L. Popescu, "OPTICAL PROPERTIES OF PbS CRYSTALS OBTAINED ON GLASS SUBSTRATE FROM SOLUTIONS CONTAINING HYDROXYLAMINE HYDROCHLORIDE IN AN ULTRASONIC BATHS," Chalcogenide Letters, vol. 12, pp. 363-373, Jul 2015.

[217] V. Popescu, S. Nedevschi, R. Danescu, and T. Marita, "A Lane Assessment Method Using Visual Information Based on a Dynamic Bayesian Network," Journal of Intelligent Transportation Systems, vol. 19, pp. 225-239, Jul 2015.

[218] A. Popovici, O. Corbu, G. E. Popita, C. Rosu, M. Proorocu, A. V. Sandu, et al., "Modern Mortars with Electronic Waste Scraps (Glass and Plastic)," Materiale Plastice, vol. 52, pp. 588-592, Dec 2015.

[219] A. Popovici, G. E. Popita, O. Corbu, T. Rusu, C. Rosu, M. Proorocu, et al., "UNCONVENTIONAL MORTARS WITH RECYCLED CATHODE RAY TUBES WASTE GLASS," Environmental Engineering and Management Journal, vol. 14, pp. 2661-2670, Nov 2015.

[220] M. Pustan, C. Dudescu, and C. Birleanu, "The effect of sensing area position on the mechanical response of mass-detecting cantilever sensor," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol. 21, pp. 1827-1834, Sep 2015.

[221] M. Pustan, C. Dudescu, and C. Birleanu, "Nanomechanical and nanotribological characterization of a MEMS micromembrane supported by two folded hinges," Analog Integrated Circuits and Signal Processing, vol. 82, pp. 627-635, Mar 2015.

[222] H. Z. Qin and O. Furdui, "Three open problems and a conjecture," Open Mathematics, vol. 13, pp. 729-736, Oct 2015.

[223] M. Rada, L. Rus, S. Rada, P. Pascuta, S. Stan, N. Dura, et al., "Role of vanadium ions on structural, optical and electrochemical properties of the vanadate-lead glasses," Journal of Non-Crystalline Solids, vol. 414, pp. 59-65, Apr 2015.

[224] S. Rada, L. Rus, M. Rada, E. Culea, N. Aldea, S. Stan, et al., "Synthesis, structure, optical and electrochemical properties of the lead sulfate-lead dioxide-lead glasses and vitroceramics," Solid State Ionics, vol. 274, pp. 111-118, Jun 2015.

[225] S. A. Radu, V. D. Leordean, N. Balc, and O. Nemes, "RESIN TYPE INFLUENCE ON MOULDED PARTS FINAL DIMENSIONS," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 219-228, Jun 2015.

[226] C. Radulescu, R. Toader, G. Boca, M. Abrudan, C. Anghel, and D. C. Toader, "Sustainable Development in Maramures County," Sustainability, vol. 7, pp. 7622-7643, Jun 2015.

[227] I. Rasa, "Entropies and Heun functions associated with positive linear operators," Applied Mathematics and Computation, vol. 268, pp. 422-431, Oct 2015.

[228] Y. Reyes-Vidal, R. Suarez-Rojas, C. Ruiz, J. Torres, S. Talu, A. Mendez, et al., "Electrodeposition, characterization, and antibacterial activity of zinc/silver particle composite coatings," Applied Surface Science, vol. 342, pp. 34-41, Jul 2015.

[229] M. D. Roman, R. A. Felseghi, and M. V. Muresan, "MODELLING AND SIMULATION OF BOD AND COD FOR EFFLUENT LEVELS OF AN AERATION TANK FROM GHERLA WASTE WATER TREATMENT PLANT," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 399-408, Jun 2015.

[230] C. Rosu, G. E. Popita, D. Manciula, A. Popovici, O. Corbu, and A. Cozma, "TANNED LEATHER WASTE: A HAZARDOUS WASTE OR NOT?," Journal of Environmental Protection and Ecology, vol. 16, pp. 899-907, 2015.

[231] V. Rus, A. Hegyi, H. Vermesan, and A. E. Tiuc, "KINETICS OF THE CORROSION PROCESS OF HOT DIP GALVANIZED STEEL REINFOCEMENT IN FRESH CONCRETE," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 409-419, Jun 2015.

[232] F. Rusu, I. Craciun, and L. Tudose, "STATISTICAL EVALUATION OF AESTHETIC SHAPES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 553-558, Nov 2015.

[233] F. Rusu, M. Pustan, C. Birleanu, R. Muller, R. Voicu, and A. Baracu, "Analysis of the surface effects on adhesion in MEMS structures," Applied Surface Science, vol. 358, pp. 634-640, Dec 2015.

[234] F. Rusu, L. Tudose, and C. Tudose, "BEARING LIFE APPROXIMATION USING KRIGING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 219-224, Jun 2015.

[235] A. M. Salantiu, C. Fekete, L. Muresan, P. Pascuta, F. Popa, and C. Popa, "Anodic oxidation of PM porous titanium for increasing the corrosion resistance of endosseous implants," Materials Chemistry and Physics, vol. 149, pp. 453-459, Jan 2015.

[236] A. M. Salantiu, O. Soritau, N. Dirzu, F. Popa, L. Muresan, V. Popescu, et al., "POROUS TITANIUM - AN ENHANCED SUPPORT FOR HUMAN OSTEOBLASTS AFTER ANODIZATION AND c-RGD IMMOBILIZATION," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 45-58, Jun 2015.

[237] T. Sanislav, "DEPONTO: A Reusable Dependability Domain Ontology," Tem Journal-Technology Education Management Informatics, vol. 4, pp. 223-228, Aug 2015.

[238] L. Scurtu, L. Banfalvi, R. Curta, and A. Steopan, "USING VIBRATIONS IN SMART FURNITURE DESIGN," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 49-52, Mar 2015.

[239] L. I. Scurtu, S. Bodi, and M. Dragomir, "OPTIMIZATION METHODS APPLIED IN CAD BASED FURNITURE DESIGN," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 559-562, Nov 2015.

[240] R. Shikhgasan, T. Stefan, S. Dinara, S. Sebastian, and R. Guseyn, "Epitaxy of silicon carbide on silicon: Micromorphological analysis of growth surface evolution," Superlattices and Microstructures, vol. 86, pp. 395-402, Oct 2015.

[241] D. Simon, C. Boianceanu, G. De Mey, and V. Topa, "Experimental Reliability Improvement of Power Devices Operated Under Fast Thermal Cycling," Ieee Electron Device Letters, vol. 36, pp. 696-698, Jul 2015.

[242] A. Sintamarian, "SHARP ESTIMATES REGARDING THE REMAINDER OF THE ALTERNATING HARMONIC SERIES," Mathematical Inequalities & Applications, vol. 18, pp. 347-352, Jan 2015.

[243] R. S. Sipos, R. Fechete, R. I. Chelcea, D. Moldovan, Z. Pap, Z. Pavai, et al., "Ovariectomized rats' femur treated with fibrates and statins. Assessment of pore-size distribution by H-1-NMR relaxometry," Romanian Journal of Morphology and Embryology, vol. 56, pp. 743-752, 2015.

[244] R. S. Sipos, R. Fechete, D. Moldovan, I. Sus, S. Szasz, and Z. Pavai, "Assessment of femoral bone osteoporosis in rats treated with simvastatin or fenofibrate," Open Life Sciences, vol. 10, pp. 379-387, Jan 2015.

[245] I. Smical, A. Muntean, and E. Nour, "Research on the Surface Water Quality in Mining Influenced Area in North-Western part of Romania," Geographica Pannonica, vol. 19, pp. 20-30, Mar 2015.

[246] K. Sodjavi, B. Montagne, P. Braganca, A. Meslem, F. Bode, and M. Kristiawan, "Impinging cross-shaped submerged jet on a flat plate: a comparison of plane and hemispherical orifice nozzles," Meccanica, vol. 50, pp. 2927-2947, Dec 2015.

[247] S. Solcan, C. Neamtu, R. Ghinea, and S. Bodi, "USING TRIZ METHOD FOR SUPPORT INNOVATION IN DEVELOPING PLASTIC PARTS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 605-608, Nov 2015.

[248] C. G. Sopoian and I. Blebea, "NUMERICAL RESEARCH IN THE FIELD OF PREVENTIVE MAINTENANCE OF TECHNICAL SYSTEMS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 285-292, Jun 2015.

[249] M. B. Soporan and O. Nemes, "QUANTITATIVE ANALYSIS OF THE NONCOMPLIANT LANDFILL CONSTITUENTS," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 201-206, Jun 2015.

[250] V. F. Soporan, L. Nascutiu, B. Soporan, and C. Pavai, "Case studies of methane dispersion patterns and odor strength in vicinity of municipal solid waste landfill of Cluj-Napoca, Romania, using numerical modeling," Atmospheric Pollution Research, vol. 6, pp. 312-321, Mar 2015.

[251] S. Stach, D. Dallaeva, S. Talu, P. Kaspar, P. Tomanek, S. Giovanzana, et al., "Morphological features in aluminum nitride epilayers prepared by magnetron sputtering," Materials Science-Poland, vol. 33, pp. 175-184, Mar 2015.

[252] S. Stach, Z. Garczyk, S. Talu, S. Solaymani, A. Ghaderi, R. Moradian, et al., "Stereometric Parameters of the Cu/Fe NPs Thin Films," Journal of Physical Chemistry C, vol. 119, pp. 17887-17898, Aug 2015.

[253] A. A. Stashkevich, M. Belmeguenai, Y. Roussigne, S. M. Cherif, M. Kostylev, M. Gabor, et al., "Experimental study of spin-wave dispersion in Py/Pt film structures in the presence of an interface Dzyaloshinskii-Moriya interaction," Physical Review B, vol. 91, Jun 2015.

[254] I. V. Sucala, "Managers of Transition-Leadership in Post-Communist Romanian Companies," Europe-Asia Studies, vol. 67, pp. 652-670, Apr 2015.

[255] I. V. Sucala and A. Sava, "The Attitude of Romanian Industrial Companies towards the Market during the Transition," Acta Polytechnica Hungarica, vol. 12, pp. 81-99, 2015.

[256] M. Sys, Z. Riha, V. Matyas, K. Marton, and A. Suciu, "On the Interpretation of Results from the NIST Statistical Test Suite," Romanian Journal of Information Science and Technology, vol. 18, pp. 18-32, 2015.

[257] S. Talu, M. Bramowicz, S. Kulesza, A. Shafiekhani, A. Ghaderi, F. Mashayekhi, et al., "Microstructure and Tribological Properties of FeNPs@a-C:H Films by Micromorphology Analysis and Fractal Geometry," Industrial & Engineering Chemistry Research, vol. 54, pp. 8212-8218, Aug 2015.

[258] S. Talu, D. M. Calugaru, and C. A. Lapascu, "Characterisation of human non-proliferative diabetic retinopathy using the fractal analysis," International Journal of Ophthalmology, vol. 8, pp. 770-776, Aug 2015.

[259] S. Talu, N. Patra, and M. Salerno, "Micromorphological characterization of polymer-oxide nanocomposite thin films by atomic force microscopy and fractal geometry analysis," Progress in Organic Coatings, vol. 89, pp. 50-56, Dec 2015.

[260] S. Talu, S. Stach, S. F. Alb, and M. Salerno, "Multifractal characterization of a dental restorative composite after air-polishing," Chaos Solitons & Fractals, vol. 71, pp. 7-13, Feb 2015.

[261] S. Talu, S. Stach, T. Ghodselahi, A. Ghaderi, S. Solaymani, A. Boochani, et al., "Topographic Characterization of Cu-Ni NPs @ a-C:H Films by AFM and Multifractal Analysis," Journal of Physical Chemistry B, vol. 119, pp. 5662-5670, Apr 2015.

[262] S. Talu, S. Stach, B. Klaic, T. Misic, J. Malina, and A. Celebic, "Morphology of Co-Cr-Mo dental alloy surfaces polished by three different mechanical procedures," Microscopy Research and Technique, vol. 78, pp. 831-839, Sep 2015.

[263] S. Talu, S. Stach, T. Lainovic, M. Vilotic, L. Blazic, S. F. Alb, et al., "Surface roughness and morphology of dental nanocomposites polished by four different procedures evaluated by a multifractal approach," Applied Surface Science, vol. 330, pp. 20-29, Mar 2015.

[264] S. Talu, S. Stach, D. Raoufi, and F. Hosseinpanahi, "Film Thickness Effect on Fractality of Tin-Doped In2O3 Thin Films," Electronic Materials Letters, vol. 11, pp. 749-757, Sep 2015.

[265] S. Talu, S. Stach, S. Solaymani, R. Moradian, A. Ghaderi, M. R. Hantehzadeh, et al., "Multifractal spectra of atomic force microscope images of Cu/Fe nanoparticles based films thickness," Journal of Electroanalytical Chemistry, vol. 749, pp. 31-41, Jul 2015.

[266] S. Talu, S. Stach, V. Sueiras, and N. M. Ziebarth, "Fractal Analysis of AFM Images of the Surface of Bowman's Membrane of the Human Cornea," Annals of Biomedical Engineering, vol. 43, pp. 906-916, Apr 2015.

[267] S. Talu, S. Stach, S. Valedbagi, R. Bavadi, S. M. Elahi, and M. Talu, "Multifractal characteristics of titanium nitride thin films," Materials Science-Poland, vol. 33, pp. 541-548, Sep 2015.

[268] S. Talu, S. Stach, S. Valedbagi, S. M. Elahi, and R. Bavadi, "Surface morphology of titanium nitride thin films synthesized by DC reactive magnetron sputtering," Materials Science-Poland, vol. 33, pp. 137-143, Mar 2015.

[269] S. Talu, K. Stepien, and M. O. Caglayan, "Topographic characterization of unworn contact lenses assessed by atomic force microscopy and wavelet transform," Microscopy Research and Technique, vol. 78, pp. 1026-1031, Nov 2015.

[270] S. Talu, C. Vladutiu, and C. A. Lupascu, "Characterization of human retinal vessel arborisation in normal and amblyopic eyes using multifractal analysis," International Journal of Ophthalmology, vol. 8, pp. 996-1002, Oct 2015.

[271] P. D. Teodosescu, M. Bojan, I. C. Vese, and R. Marschalko, "RESEARCH CONCERNING UNIFIED ELECTRONIC LIGHTING DEVICES," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 16, pp. 226-234, Apr-Jun 2015.

[272] M. Tertis, A. Florea, B. Feier, I. O. Marian, L. Silaghi-Dumitrescu, A. Cristea, et al., "Electrochemical Impedance Studies on Single and Multi-Walled Carbon Nanotubes-Polymer Nanocomposites for Biosensors Development," Journal of Nanoscience and Nanotechnology, vol. 15, pp. 3385-3393, May 2015.

[273] A. E. Tiuc, O. Nemes, I. Perhaita, H. Vermesan, T. Gabor, and V. Dan, "THERMAL BEHAVIOUR OF POLYURETHANE MATRIX COMPOSITE MATERIALS," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp. 169-176, Jun 2015.

[274] T. Tiuca, C. Rusu, S. Noveanu, S. Besoiu, and D. Mandru, "THE SIMULATION AND THE INTERFACE OF THE MECHANISMS USED IN MICROFACTORIES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 609-612, Nov 2015.

[275] C. C. Todea, "Symmetric cohomology of groups as a Mackey functor," Bulletin of the Belgian Mathematical Society-Simon Stevin, vol. 22, pp. 49-58, Mar 2015.

[276] C. C. Todea, "A theorem of Mislin for cohomology of fusion systems and applications to block algebras of finite groups," Expositiones Mathematicae, vol. 33, pp. 526-534, 2015.

[277] R. Todoran, D. Todoran, and Z. Szakacs, "Valence band gaps and plasma energies for galena, sphalerite, and chalcopyrite natural minerals using differential optical reflectance spectroscopy," Russian Journal of Physical Chemistry A, vol. 89, pp. 2422-2425, Dec 2015.

[278] A. Todorut, N. Cordos, I. Barabas, and M. Balcau, "ASPECTS REGARDING THE NUMERICAL MODELLING OF PEDESTRIAN-VEHICLE ACCIDENTS WHEN BOTH PARTIES HAVE CONTINUOUS VISIBILITY OF EACH OTHER IN TRAFFIC," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 537-546, Nov 2015.

[279] A. Todorut, N. Cordos, I. Barabas, and M. Balcau, "THE EVALUATION OF KINEMATIC MEASURES WHICH CHARACTERIZE THE VEHICLE-PEDESTRIAN ACCIDENTS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 31-40, Mar 2015.

[280] C. Tosa, D. Antov, G. Kollo, H. Rouk, and M. Rannala, "A METHODOLOGY FOR MODELLING TRAFFIC RELATED EMISSIONS IN SUBURBAN AREAS," Transport, vol. 30, pp. 80-87, Jan 2015.

[281] A. C. Tot and M. Arghir, "QUANTIFYING ACOUSTIC, MECHANICAL AND ELECTRICAL PHENOMENA OF A DEVICE FOR THE DETERMINATION OF SOUND-ABSORBING COEFFICIENT," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 119-124, Mar 2015.

[282] A. Trif and C. M. Nedezki, "RESEARCH REGARDING THE EVOLUTION OF TEMPERATURE IN CASE OF DRY TURNING OF AN ALUMINUM ALLOY," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 547-552, Nov 2015.

[283] F. L. Ureche, V. F. Soporan, and G. Contiu, "CONSIDERATIONS AND APPRECIATIONS ON THE MODELING OF THE TECHNOLOGICAL PROCESS OF WIRE EROSION PROCESSING," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 293-298, Jun 2015.

[284] L. Vacariu, A. Hangan, and M. Mocanu, "POLLUTION DETECTION ON THE CYBERWATER PLATFORM," Environmental Engineering and Management Journal, vol. 14, pp. 2043-2050, Sep 2015.

[285] J. A. Valles and R. Galatus, "Modeling of Yb3+/Er3+-codoped microring resonators," Optical Materials, vol. 41, pp. 126-130, Mar 2015.

[286] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Principles of Modeling and Simulation Processes," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 1-8.

[287] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Mathematics Behind the Models," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 9-201.

[288] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Virtual Powertrain Design," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 203-221.

[289] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Classical Powertrain Configuration Model and Simulation," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 223-287.

[290] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Hybrid Powertrain Configuration Model and Simulation," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 289-385.

[291] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Electric Powertrain Configuration Model and Simulation," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 387-462.

[292] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Creating Virtual Road Infrastructure," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 463-476.

[293] B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Loop Powertrain Simulation," in Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 477-524.

[294] M. Varga, M. A. Badiu, and V. Bota, "Link adaptation algorithm for distributed coded transmissions in cooperative OFDMA systems," Telecommunication Systems, vol. 59, pp. 477-489, Aug 2015.

[295] C. Vicas and S. Nedevschi, "Detecting Curvilinear Features Using Structure Tensors," Ieee Transactions on Image Processing, vol. 24, pp. 3874-3887, Nov 2015.

[296] C. Vilau, D. Moldan, N. Balc, and D. Leordean, "RESEARCHES ON THE BUCKLING TEST OF A TRIPOD COMPONENTS USED IN EMERGENCIES," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 299-302, Jun 2015.

[297] J. R. Villar, C. Chira, J. Sedano, S. Gonzalez, and J. M. Trejo, "A hybrid intelligent recognition system for the early detection of strokes," Integrated Computer-Aided Engineering, vol. 22, pp. 215-227, 2015.

[298] J. R. Villar, S. Gonzalez, J. Sedano, C. Chira, and J. M. Trejo-Gabriel-Galan, "Improving Human Activity Recognition and its Application in Early Stroke Diagnosis," International Journal of Neural Systems, vol. 25, Jun 2015.

[299] O. I. Vulcu and M. Arghir, "EXPERIMENTAL STUDY OF PASSENGER VEHICLE VIBRATIONAL BEHAVIOR IN ACCORDANCE WITH ITS MAINTENANCE," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 125-130, Mar 2015.

[300] O. I. Vulcu and M. Arghir, "A PASSENGER VEHICLE MAINTENANCE STUDY USING EXPERIMENTAL VIBRATION ANALYSIS," Acta Technica Napocensis Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp. 131-136, Mar 2015.

[301] A. Zene, C. T. Chirap, O. Cret, and L. Vacariu, "Efficient Hardware Implementation of Snapshotting Algorithms for NoC Applications," Romanian Journal of Information Science and Technology, vol. 18, pp. 79-92, 2015.

[302] A. Zuza, P. S. Agachi, V. M. Cristea, A. Nair, N. N. Tue, and C. Horju-Deac, "CASE STUDY ON ENERGY EFFICIENCY OF BIOGAS PRODUCTION IN INDUSTRIAL ANAEROBIC DIGESTERS AT MUNICIPAL WASTEWATER TREATMENT PLANTS," Environmental Engineering and Management Journal, vol. 14, pp. 357-360, Feb 2015.