# ISI Journals 2015

[1] U. Abel, V. Gupta, and M. Ivan, "A generalization of a combinatorial identity by Chang and Xu," Bulletin of Mathematical Sciences, vol. 5, pp. 511-516, Oct 2015.

[2] U. Abel, M. Ivan, and R. Paltanea, "The
Durrmeyer variant of an operator defined by DD Stancu," Applied
Mathematics and Computation, vol. 259, pp. 116-123, May 2015.

[3]
S. Achimas, M. Borzan, F. Mocean, D. Pintea, and A. Trif, "MECHANICAL
MODEL OF THE CUTTING PROCESS IN STEEL FACING," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
73-80, Mar 2015.

[4] C. Aciu, D. L. Manea, C.
Puia, and O. Cadar, "MORTARS FOR THE ENHANCEMENT OF THE INDOOR
ENVIRONMENTAL QUALITY," Studia Universitatis Babes-Bolyai Chemia, vol.
60, pp. 45-54, Dec 2015.

[5] A. M. Acu, D.
Barbosu, and D. F. Sofonea, "NOTE ON A q-ANALOGUE OF STANCU-KANTOROVICH
OPERATORS," Miskolc Mathematical Notes, vol. 16, pp. 3-15, 2015.

[6]
A. T. Alexandru, "Addendum modification of spur gears with equalized
efficiency at the points where the meshing stars and ends," Mechanika,
pp. 480-485, 2015.

[7] A. Andreica and C.
Chira, "Evolution and dynamics of node-weighted networks for cellular
automata computation," Logic Journal of the Igpl, vol. 23, pp. 400-409,
Jun 2015.

[8] A. Andreica and C. Chira,
"Best-order crossover for permutation-based evolutionary algorithms,"
Applied Intelligence, vol. 42, pp. 751-776, Jun 2015.

[9]
T. A. Antal, "PROGRAMMING CANVAS X Pro 16 USING SCRIPTING
TECHNOLOGIES," Acta Technica Napocensis Series-Applied Mathematics
Mechanics and Engineering, vol. 58, pp. 151-156, Jun 2015.

[10]
G. Arghir, "CONSTRUCTION OF THE REAL WING CLOSE TO THE IDEAL WING,"
Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 7-10, Mar 2015.

[11]
A. Arman, S. Talu, C. Luna, A. Ahmadpourian, M. Naseri, and M.
Molamohammadi, "Micromorphology characterization of copper thin films by
AFM and fractal analysis," Journal of Materials Science-Materials in
Electronics, vol. 26, pp. 9630-9639, Dec 2015.

[12]
A. Badiu, I. Badiu, and M. Dragomir, "STUDIES REGARDING THE USE OF
RECLAIMED WOOD IN THE MANUFACTURE OF MODERN FURNITURE - PART I," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 225-230, Jun 2015.

[13]
A. Badiu, I. Badiu, and M. Dragomir, "STUDIES REGARDING THE USE OF
RECLAIMED WOOD IN THE MANUFACTURE OF MODERN FURNITURE - PART II," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 231-238, Jun 2015.

[14]
E. N. Bakatula, C. J. Straker, E. M. Cukrowska, I. M. Weiersbye, L.
Mihaly-Cozmuta, and H. Tutu, "A zeoponic system modified with
Penicillium simplicissimum for the removal of trace elements from
aqueous solutions and gold mine leachates," Journal of Geochemical
Exploration, vol. 156, pp. 34-43, Sep 2015.

[15]
I. Barabas, "Liquid densities and excess molar volumes of ethanol plus
biodiesel binary system between the temperatures 273.15 K and 333.15 K,"
Journal of Molecular Liquids, vol. 204, pp. 95-99, Apr 2015.

[16]
D. Barbosu and C. V. Muraru, "Approximating B-continuous functions
using GBS operators of Bernstein-Schurer-Stancu type based on
q-integers," Applied Mathematics and Computation, vol. 259, pp. 80-87,
May 2015.

[17] B. Belean, M. Borda, J.
Ackermann, I. Koch, and O. Balacescu, "Unsupervised image segmentation
for microarray spots with irregular contours and inner holes," Bmc
Bioinformatics, vol. 16, Dec 2015.

[18] B.
Belean, R. Terebes, and A. Bot, "Low-complexity PDE-based approach for
automatic microarray image processing," Medical & Biological
Engineering & Computing, vol. 53, pp. 99-110, Feb 2015.

[19]
M. Belmeguenai, M. S. Gabor, T. Petrisor, F. Zighem, S. M. Cherif, and
C. Tiusan, "Capping layer-tailored interface magnetic anisotropy in
ultrathin Co2FeAl films," Journal of Applied Physics, vol. 117, Jan
2015.

[20] M. Belmeguenai, M. S. Gabor, Y.
Roussigne, F. Zighem, S. M. Cherif, and C. Tiusan, "Perpendicular
Magnetic Anisotropy in Co-2 FeAl Thin Films: Effect of Annealing
Temperature," Ieee Transactions on Magnetics, vol. 51, Nov 2015.

[21]
M. Belmeguenai, H. Tuzcuoglu, M. Gabor, T. Petrisor, C. Tiusan, D.
Berling, et al., "Magnetic and structural properties of Co2FeAl thin
films grown on Si substrate," Journal of Magnetism and Magnetic
Materials, vol. 373, pp. 140-143, Jan 2015.

[22]
S. Berezina, A. A. Il'Icheva, L. I. Podzorova, and S. Talu, "Surface
micromorphology of dental composites CE-TZP - Al2O3 with Ca+2 modifier,"
Microscopy Research and Technique, vol. 78, pp. 840-846, Sep 2015.

[23]
V. Berinde and M. A. Petric, "Fixed point theorems for cyclic non-self
single-valued almost contractions," Carpathian Journal of Mathematics,
vol. 31, pp. 289-296, 2015.

[24] C. Birleanu
and M. Pustan, "Analysis of the adhesion effect in RF-MEMS switches
using atomic force microscope," Analog Integrated Circuits and Signal
Processing, vol. 82, pp. 571-581, Mar 2015.

[25]
M. M. Birou, "A class of Markov type operators which preserve e(j), j
>= 1," Applied Mathematics and Computation, vol. 250, pp. 1-11, Jan
2015.

[26] I. Blebea and C. G. Sopoian,
"DETERMINATION OF RELIABILITY PARAMETERS IN COMPLEX TECHNICAL SYSTEMS,"
Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 157-164, Jun 2015.

[27]
L. Bolundut, E. Culea, G. Borodi, R. Stefan, C. Munteanu, and P.
Paseuta, "Influence of Sm3+:Ag codoping on structural and spectroscopic
properties of lead tellurite glass ceramics," Ceramics International,
vol. 41, pp. 2931-2939, Mar 2015.

[28] B. Bot,
S. Emerich, S. Martoiu, and B. Belean, "FSL-based Hardware
Implementation for Parallel Computation of cDNA Microarray Image
Segmentation," International Journal of Advanced Computer Science and
Applications, vol. 6, pp. 20-27, Jul 2015.

[29]
A. I. Botean, D. S. Mandru, and M. Hardau, "PLAN MODEL TO ANALYZE THE
STATE OF STRESSES AND STRAINS OF THE HUMAN PROXIMAL FEMORAL BONE," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 199-204, Jun 2015.

[30]
A. Botezan, R. Tirnovan, R. Munteanu, A. Graur, and D. Rafiroiu,
"Hysteresis Current Control of the Single-Phase Voltage Source Inverter
Using eMEGAsim Real-Time Simulator," Advances in Electrical and Computer
Engineering, vol. 15, pp. 99-104, 2015.

[31]
G. Buda, A. Samuila, M. Bilici, S. Atroune, and L. Dascalescu,
"Set-Point Identification and Robustness Testing of a Triboelectrostatic
Separation Process for Mixed Granular Plastics," Ieee Transactions on
Industry Applications, vol. 51, pp. 1153-1160, Mar-Apr 2015.

[32]
Z. Buna, I. Badiu, and A. Eles, "ON USING PARAMETRIC MODELING IN
FURNITURE DESIGN," Acta Technica Napocensis Series-Applied Mathematics
Mechanics and Engineering, vol. 58, pp. 239-244, Jun 2015.

[33]
A. Buzatu, G. Damian, H. G. Dill, N. Buzgar, and A. I. Apopei,
"Mineralogy and geochemistry of sulfosalts from Baia Sprie ore deposit
(Romania) - New bismuth minerals occurrence," Ore Geology Reviews, vol.
65, pp. 132-147, Mar 2015.

[34] M. Calixto, J.
Guerrero, and D. Rosca, "Wavelet transform on the torus: A group
theoretical approach," Applied and Computational Harmonic Analysis, vol.
38, pp. 32-49, Jan 2015.

[35] A. Capata,
"OPTIMALITY CONDITIONS FOR VECTOR EQUILIBRIUM PROBLEMS WITH SET-VALUED
MAPPINGS AND CONE CONSTRAINTS," Mathematica Slovaca, vol. 65, pp.
683-696, Jun 2015.

[36] A. Capata, "OPTIMALITY
CONDITIONS FOR STRONG VECTOR EQUILIBRIUM PROBLEMS UNDER A WEAK
CONSTRAINT QUALIFICATION," Journal of Industrial and Management
Optimization, vol. 11, pp. 563-574, Apr 2015.

[37]
A. Cernat, M. Tertis, R. S. Andulescu, F. Bedioui, A. Cristea, and C.
Cristea, "Electrochemical sensors based on carbon nanomaterials for
acetaminophen detection: A review," Analytica Chimica Acta, vol. 886,
pp. 16-28, Jul 2015.

[38] K. M. Chao, A. E.
James, A. G. Nanos, J. H. Chen, S. D. Stan, I. Muntean, et al., "Cloud
E-learning for Mechatronics: CLEM," Future Generation Computer
Systems-the International Journal of Escience, vol. 48, pp. 46-59, Jul
2015.

[39] R. I. Chelcea, R. S. Sipos, R.
Fechete, D. Moldovan, I. Sus, Z. Pavai, et al., "ONE-DIMENSIONAL LAPLACE
SPECTROSCOPY USED FOR THE ASSESSMENT OF PORE-SIZE DISTRIBUTION ON THE
OVARIECTOMIZED RATS FEMUR," Studia Universitatis Babes-Bolyai Chemia,
vol. 60, pp. 57-70, Mar 2015.

[40] I. Chicinas,
T. F. Marinca, F. Popa, and B. V. Neamtu, "Rhometal interface in
pseudo-core shell powders like Permalloy/Rhometal type," Applied Surface
Science, vol. 358, pp. 627-633, Dec 2015.

[41]
A. Chioreanu, S. Brad, C. Porumb, and S. Porumb, "E-maintenance
ontology-based approach for heterogeneous distributed robotic production
capabilities," International Journal of Computer Integrated
Manufacturing, vol. 28, pp. 200-212, Feb 2015.

[42]
M. Cimpan and M. Arghir, "CORRECTIVE ACTION TO ELIMINATE THE DYNAMIC
FAULTS OF ROTATING MACHINERY," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 81-86, Mar 2015.

[43]
N. Cioica, R. Fechete, R. Chelcea, C. Cota, M. Todica, C. V. Pop, et
al., "WATER ABSORPTION AND DEGRADATION OF PACKAGES BASED ON NATIVE CORN
STARCH WITH PLASTICIZERS," Studia Universitatis Babes-Bolyai Chemia,
vol. 60, pp. 45-55, Mar 2015.

[44] N. Cioica,
R. Fechete, C. Filip, I. B. Cozar, C. Cota, and E. M. Nagy, "NMR AND SEM
INVESTIGATION OF EXTRUDED NATIVE CORN STARCH WITH PLASTICIZERS,"
Romanian Journal of Physics, vol. 60, pp. 512-520, 2015.

[45]
E. Ciupan, F. Lungu, and C. Ciupan, "ANN Training Method with a Small
Number of Examples Used for Robots Control," International Journal of
Computers Communications & Control, vol. 10, pp. 643-653, Oct
2015.

[46] A. Ciurte, S. Nedevschi, and I.
Rasa, "Systems of nonlinear algebraic equations with unique solution,"
Numerical Algorithms, vol. 68, pp. 367-376, Feb 2015.

[47]
D. Cocorean, C. Vaida, N. Plitea, and D. Pisla, "MODULAR DESIGN OF A
PARALLEL ROBOTIC STRUCTURE FOR BRACHYTHERAPY," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
245-250, Jun 2015.

[48] A. C. Coman, D. A.
Todea, F. Popa, T. Radu, O. Cadar, and C. Borzan, "Multilateral
characterization of masks and tubes surfaces in contact with respiratory
system through ventilation," Journal of Optoelectronics and Advanced
Materials, vol. 17, pp. 1563-1571, Sep-Oct 2015.

[49]
R. Comes and C. Neamtu, "DESIGN A LOW-COST EYEWEAR DISPLAY ADAPTED TO
ADDITIVE MANUFACTURING," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 563-566, Nov 2015.

[50]
N. Cordos, M. Marinica, A. Todorut, and M. Balcau, "POSSIBILITIES OF
CREATING AN ACCIDENTOLOGY DATABASE," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
205-212, Jun 2015.

[51] S. C. Cosma, A. V.
Miron, and A. Radu, "ZYGOMATIC IMPLANTS MANUFACTURED BY SLM," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 251-256, Jun 2015.

[52]
A. Cotetiu, R. Cotetiu, and N. Ungureanu, "COMPARATIVE STUDY BETWEEN
THE ALTERNATIVE USED BY THE IMP TYPE PECUSSION DRILLS AND THE VERSION
USING FLUID ELEMENTS REGARDING THE SUPPLYING, COMMAND AND AUTOMATIC
ADJUSTMENT SYSTEMS OF THE INJECTION WATER PRESSURE," Archives of Mining
Sciences, vol. 60, pp. 879-888, 2015.

[53] A.
M. Cozmuta, A. Peter, L. M. Cozmuta, C. Nicula, L. Crisan, L. Baia, et
al., "Active Packaging System Based on Ag/TiO2 Nanocomposite Used for
Extending the Shelf Life of Bread. Chemical and Microbiological
Investigations," Packaging Technology and Science, vol. 28, pp. 271-284,
Apr 2015.

[54] A. M. Cozmuta, A. Turila, R.
Apjok, A. Ciocian, L. M. Cozmuta, A. Peter, et al., "Preparation and
characterization of improved gelatin films incorporating hemp and sage
oils," Food Hydrocolloids, vol. 49, pp. 144-155, Jul 2015.

[55]
I. Craciun, D. Inoan, D. Popa, and L. Tudose, "Generalized Golden
Ratios defined by means," Applied Mathematics and Computation, vol. 250,
pp. 221-227, Jan 2015.

[56] I. Craciun, F.
Rusu, and L. Tudose, "AESTHETIC OPTIMIZATION OF A BASIC SHAPE," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 257-262, Jun 2015.

[57]
M. Cretu, A. Darabant, and R. V. Ciupa, "Magnetic Stimulation of the
Spinal Cord: Evaluating the Characteristics of an Appropriate
Stimulator," Artificial Organs, vol. 39, pp. 841-848, Oct 2015.

[58]
M. Cretu and D. D. Micu, "Improved coil design for repetitive magnetic
stimulation of the spinal cord," Compel-the International Journal for
Computation and Mathematics in Electrical and Electronic Engineering,
vol. 34, pp. 1043-1053, 2015.

[59] C. Croitoru,
I. Nastase, F. Bode, A. Meslem, and A. Dogeanu, "Thermal comfort models
for indoor spaces and vehicles-Current capabilities and future
perspectives," Renewable & Sustainable Energy Reviews, vol. 44,
pp. 304-318, Apr 2015.

[60] A. Cuibus, C.
Cosma, L. E. Muntean, and Z. Kiss, "EXPERIMENTAL STUDIES ON THE
RADIOACTIVITY AND EXHALATION RATE OF SEVERAL CONCRETE MIXTURES WITH
ADDITIONS," Romanian Journal of Physics, vol. 60, pp. 1183-1192, 2015.

[61]
E. N. Culea, P. Pascuta, M. Pustan, D. R. Tamas-Gavrea, L. Pop, and I.
Vida-Simiti, "Effects of Eu:Ag codoping on structural, magnetic and
mechanical properties of lead tellurite glass ceramics," Journal of
Non-Crystalline Solids, vol. 408, pp. 18-25, Jan 2015.

[62]
R. Curta, Z. Buna, M. Dragomir, R. Comes, and D. Banyai, "METHODOLOGY
AND CASE STUDY IN THE FURNITURE INDUSTRY USING PHOTOGRAMMETRY AND 5 AXIS
MACHINING," Acta Technica Napocensis Series-Applied Mathematics
Mechanics and Engineering, vol. 58, pp. 53-58, Mar 2015.

[63]
R. Curtean, R. Gavrila, and I. Lupea, "ESTIMATION OF HARMONIC RESPONSE
CONSIDERING THE TRANSFER FUNCTION RESULTED FROM FEA ANALYSIS," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 567-570, Nov 2015.

[64]
C. Czech, P. Guarneri, N. Thyagaraja, and G. Fadel, "Systematic Design
Optimization of the Metamaterial Shear Beam of a Nonpneumatic Wheel for
Low Rolling Resistance," Journal of Mechanical Design, vol. 137, Apr
2015.

[65] D. Dadarlat, M. Streza, O. Onija, C.
Prejmerean, L. Silaghi-Dumitrescu, N. Cobirzan, et al., "Complementary
photothermal techniques for complete thermal characterization of porous
and semi-transparent solids," Journal of Thermal Analysis and
Calorimetry, vol. 119, pp. 301-308, Jan 2015.

[66]
M. B. Decebal and L. A. Pop, "SOME ASPECTS ON LEGAL OBLIGATIONS AND
RIGHTS DECONTAMINATING AND CLEANING ACTIVE AREAS OF BAD PRIVATISED STATE
ENTERPRISES," Journal of Environmental Protection and Ecology, vol. 16,
pp. 1534-1542, 2015.

[67] A. Dehelean, A.
Popa, S. Rada, and E. Culea, "EPR and magnetic characterization of
Fe2O3-TeO2 and CuO-TeO2 glasses obtained by melt quenching and sol-gel
processes," Journal of Magnetism and Magnetic Materials, vol. 381, pp.
131-137, May 2015.

[68] O. A. Detesan, "THE
GEOMETRIC AND KINEMATIC MODEL OF RTTRR SMALL-SIZED MODULAR ROBOT," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 513-518, Nov 2015.

[69]
O. A. Detesan, "THE NUMERICAL SIMULATION OF TRR SMALL-SIZED ROBOT,"
Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 519-524, Nov 2015.

[70]
T. Dippong, E. A. Levei, G. Borodi, F. Goga, and L. B. Tudoran,
"Influence of Co/Fe ratio on the oxide phases in nanoparticles of
CoxFe3-xO4," Journal of Thermal Analysis and Calorimetry, vol. 119, pp.
1001-1009, Feb 2015.

[71] T. Dippong, E. A.
Levei, L. Diamandescu, I. Bibicu, C. Leostean, G. Borodi, et al.,
"Structural and magnetic properties of CoxFe3-xO4 versus Co/Fe molar
ratio," Journal of Magnetism and Magnetic Materials, vol. 394, pp.
111-116, Nov 2015.

[72] J. Domokos, O. Buza,
and G. Toderean, "Romanian phonetic transcription dictionary for
speeding up language technology development," Language Resources and
Evaluation, vol. 49, pp. 311-325, Jun 2015.

[73]
D. Dubina, V. Ungureanu, and L. Gilia, "Experimental investigations of
cold-formed steel beams of corrugated web and built-up section for
flanges," Thin-Walled Structures, vol. 90, pp. 159-170, May 2015.

[74]
E. H. Dulf, F. V. Dulf, and C. I. Muresan, "Fractional Model of the
Cryogenic (C-13) Isotope Separation Column," Chemical Engineering
Communications, vol. 202, pp. 1600-1606, 2015.

[75]
F. V. Dulf, D. C. Vodnar, E. H. Dulf, and M. I. Tosa, "Total Phenolic
Contents, Antioxidant Activities, and Lipid Fractions from Berry Pomaces
Obtained by Solid-State Fermentation of Two Sambucus Species with
Aspergillus niger," Journal of Agricultural and Food Chemistry, vol. 63,
pp. 3489-3500, Apr 2015.

[76] A. Duluard, C.
Bellouard, Y. Lu, M. Hehn, D. Lacour, F. Montaigne, et al., "Enhanced
magnetoresistance by monoatomic roughness in epitaxial Fe/MgO/Fe tunnel
junctions," Physical Review B, vol. 91, May 2015.

[77]
D. Elenkova, J. Zaharieva, M. Getsova, I. Manolov, M. Milanova, S.
Stach, et al., "Morphology and Optical Properties of SiO2-Based
Composite Thin Films with Immobilized Terbium(III) Complex with a
Biscoumarin Derivative," International Journal of Polymer Analysis and
Characterization, vol. 20, pp. 42-56, Jan 2015.

[78]
R. Enache and A. Crisan, "Teacher skills developed in training
programs," Journal of Educational Sciences & Psychology, vol. 5,
pp. 18-23, 2015.

[79] V. Estrada-Manzo, Z.
Lendek, T. M. Guerra, and P. Pudlo, "Controller Design for Discrete-Time
Descriptor Models: A Systematic LMI Approach," Ieee Transactions on
Fuzzy Systems, vol. 23, pp. 1608-1621, Oct 2015.

[80]
R. Etz, D. Petreus, T. Frentiu, T. Patarau, and C. Orian, "An Indirect
Method and Equipment for Temperature Monitoring and Control," Advances
in Electrical and Computer Engineering, vol. 15, pp. 87-94, 2015.

[81]
P. Farago, C. Farago, G. Oltean, and S. Hintea, "An Electronically
Tunable Transconductance Amplifier for Use in Auditory Prostheses,"
Advances in Electrical and Computer Engineering, vol. 15, pp. 95-100,
2015.

[82] V. Farcas, N. Ilies, and R. Cot,
"CO2 AND ENERGY FOOTPRINT OF DIFFERENT RETAINING WALLS SOLUTIONS.
MASONRY RETAINING WALL vs. CANTILEVER RETAINING WALL," Environmental
Engineering and Management Journal, vol. 14, pp. 1323-1326, Jun 2015.

[83]
S. C. Folea and G. Mois, "A Low-Power Wireless Sensor for Online
Ambient Monitoring," Ieee Sensors Journal, vol. 15, pp. 742-749, Feb
2015.

[84] T. Frentiu, S. Butaciu, E. Darvasi,
M. Ponta, M. Senila, D. Petreus, et al., "Analytical characterization of
a method for mercury determination in food using cold vapour
capacitively coupled plasma microtorch optical emission spectrometry -
compliance with European legislation requirements," Analytical Methods,
vol. 7, pp. 747-752, 2015.

[85] T. Frentiu, S.
Butaciu, M. Ponta, M. Senila, E. Darvasi, M. Frentiu, et al.,
"Determination of Total Mercury in Fish Tissue Using a Low-Cost Cold
Vapor Capacitively Coupled Plasma Microtorch Optical Emission
Microspectrometer: Comparison with Direct Mercury Determination by
Thermal Decomposition Atomic Absorption Spectrometry," Food Analytical
Methods, vol. 8, pp. 643-648, Mar 2015.

[86] T.
Frentiu, E. Darvasi, S. Butaciu, M. Ponta, D. Petreus, R. Etz, et al.,
"Application of low-cost electrothermal vaporization capacitively
coupled plasma microtorch optical emission spectrometry for simultaneous
determination of Cd and Pb in environmental samples," Microchemical
Journal, vol. 121, pp. 192-198, Jul 2015.

[87]
L. Frosini, C. Harlisca, and L. Szabo, "Induction Machine Bearing Fault
Detection by Means of Statistical Processing of the Stray Flux
Measurement," Ieee Transactions on Industrial Electronics, vol. 62, pp.
1846-1854, Mar 2015.

[88] L. G. Fulea, V.
Bocanet, M. Bulgaru, and M. Borzan, "CONTRIBUTIONS REGARDING THE FMEA
ANALYSIS OF A CMM MEASURING PROCESS," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
59-66, Mar 2015.

[89] M. Fulea, G. Sandru, S.
Brad, and M. Maftei, "A NEW ENTREPRENEURIAL DECISION-MAKING SUPPORT
FRAMEWORK FOR ASSESSING BUSINESS LINE CORRELATIONS," Amfiteatru
Economic, vol. 17, pp. 1198-1212, Nov 2015.

[90]
M. Fulea, C. Tanaselea, B. Mocan, and M. Murar, "ALGORITHM FOR
AUTOMATICALLY GENERATING THE ROBOT PROGRAM FOR A RECONFIGURABLE
PALLETISING APPLICATION," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 579-584, Nov 2015.

[91]
O. Furdui, "The evaluation of a class of fractional part integrals,"
Integral Transforms and Special Functions, vol. 26, pp. 635-641, Aug
2015.

[92] O. Furdui, "A Stirling Integral," American Mathematical Monthly, vol. 122, pp. 290-291, Mar 2015.

[93]
O. Furdui and A. Sintamarian, "Quadratic series involving the tail of
zeta(k)," Integral Transforms and Special Functions, vol. 26, pp. 1-8,
Jan 2015.

[94] M. S. Gabor, M. Belmeguenai, T.
Petrisor, C. Ulhaq-Bouillet, S. Colis, and C. Tiusan, "Correlations
between structural, electronic transport, and magnetic properties of
Co2FeAl0.5Si0.5 Heusler alloy epitaxial thin films," Physical Review B,
vol. 92, Aug 2015.

[95] M. S. Gabor, T.
Petrisor, O. Pop, S. Colis, and C. Tiusan, "Temperature dependence of
the perpendicular magnetic anisotropy in Ta/Co2FeAl/MgO structures
probed by Anomalous Hall Effect," Journal of Magnetism and Magnetic
Materials, vol. 392, pp. 79-82, Oct 2015.

[96]
A. I. Gal, L. Vladareanu, and R. I. Munteanu, "SLIDING MOTION CONTROL
WITH BOND GRAPH MODELING APPLIED ON A ROBOT LEG," Revue Roumaine Des
Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 60, pp.
215-224, Apr-Jun 2015.

[97] B. Gavrea, "A MEAN
VALUE THEOREM FOR THE CHEBYSHEV FUNCTIONAL," Mathematical Inequalities
& Applications, vol. 18, pp. 751-757, Apr 2015.

[98]
B. Gavrea, "A Hermite-Hadamard type inequality with applications to the
estimation of moments of continuous random variables," Applied
Mathematics and Computation, vol. 254, pp. 92-98, Mar 2015.

[99]
I. Gavrea and M. Ivan, "On the rate of convergence of discretely
defined operators," Journal of Mathematical Analysis and Applications,
vol. 432, pp. 129-133, Dec 2015.

[100] I.
Gavrea and M. Ivan, "The Bernstein Voronovskaja-type theorem for
positive linear approximation operators," Journal of Approximation
Theory, vol. 192, pp. 291-296, Apr 2015.

[101]
I. Gavrea and M. Ivan, "A sharp estimate for the Peano error
representation," Applied Mathematics and Computation, vol. 252, pp.
14-19, Feb 2015.

[102] J. Gawad, D. Banabic, A.
Van Bael, D. S. Comsa, M. Gologanu, P. Eyckens, et al., "An evolving
plane stress yield criterion based on crystal plasticity virtual
experiments," International Journal of Plasticity, vol. 75, pp. 141-169,
Dec 2015.

[103] G. Gherasim, G. Thalmaier, N.
Sechel, S. Suta, I. Vida-Simiti, B. Neamtu, et al., "RESEARCHES ON
OBTAINING SINTERED Al80Fe10Ti10 FOAMS," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
585-590, Nov 2015.

[104] H. Gonska, I. Rasa,
and E. D. Stanila, "Power series of the operators," Positivity, vol. 19,
pp. 237-249, Jun 2015.

[105] N. Gougoulias, L.
Giurgiulescu, D. Kalfountzos, A. Papachatzis, I. Vagelas, D. Ftakas, et
al., "COIR EMPLOYED AS SOILLESS CULTIVATION SUBSTRATE AND ITS
INTERFERENCE WITH NUTRIENT SOLUTION DURING TWO TOMATOES CROPPING
PERIODES (CASE STUDY)," Studia Universitatis Babes-Bolyai Chemia, vol.
60, pp. 177-185, Jun 2015.

[106] N. Gougoulias,
P. Vyrlas, L. Giurgiulescu, D. Kalfountzos, and F. Eugenia, "EVALUATION
OF POLYPHENOLS CONTENT AND ANTIOXIDANT ACTIVITY OF TWO TABLE GRAPE
VARIETIES UNDER ENVIRONMENTAL CONDITIONS OF THESSALY," Carpathian
Journal of Food Science and Technology, vol. 7, pp. 119-125, 2015.

[107]
T. M. Guerra, V. Estrada-Manzo, and Z. Lendek, "Observer design for
Takagi-Sugeno descriptor models: An LMI approach," Automatica, vol. 52,
pp. 154-159, Feb 2015.

[108] M. Gueye, F.
Zighem, M. Belmeguenai, M. S. Gabor, C. Tiusan, and D. Faurie,
"Effective 90-degree magnetization rotation in Co2FeAl thin
film/piezoelectric system probed by microstripline ferromagnetic
resonance," Applied Physics Letters, vol. 107, Jul 2015.

[109]
S. Gutoiu, O. Isnard, I. Chicinas, F. Popa, A. Takacs, and V. Pop, "The
influence of milling and annealing conditions on the structural and
magnetic behavior of Nd2Fe14B/alpha-Fe hard/soft magnetic
nanocomposites," Journal of Alloys and Compounds, vol. 646, pp. 859-865,
Oct 2015.

[110] H. Harmens, D. A. Norris, K.
Sharps, G. Mills, R. Alber, Y. Aleksiayenak, et al., "Heavy metal and
nitrogen concentrations in mosses are declining across Europe whilst
some "hotspots" remain in 2010," Environmental Pollution, vol. 200, pp.
93-104, May 2015.

[111] Y. Q. He, Q. Lu, and G.
Liviu, "Effects of extraction processes on the antioxidant activity of
apple polyphenols," Cyta-Journal of Food, vol. 13, pp. 603-606, Oct
2015.

[112] A. Holhos, "Uniform approximation
of functions by Bernstein-Stancu operators," Carpathian Journal of
Mathematics, vol. 31, pp. 205-212, 2015.

[113]
A. C. Hosu, Z. I. Kiss, I. A. Ivanciu, M. Varga, and Z. A. Polgar,
"Integrated ubiquitous connectivity and centralised information platform
for intelligent public transportation systems," Iet Intelligent
Transport Systems, vol. 9, pp. 573-581, Aug 2015.

[114]
A. Ilea, A. Cristea, C. M. Dudescu, L. Hurubeanu, C. Vajaean, S. Albu,
et al., "Lip Forces and Chewing Efficiency in Children with Peripheral
Facial Paralysis," Neuropediatrics, vol. 46, pp. 242-247, Aug 2015.

[115]
L. Ilea, L. Munteanu, D. Dumitriu, M. Dudescu, C. Brisan, and V.
Chiroiu, "ASPECTS OF GENERATING 3D SURFACES WITH APPLICATIONS IN DRIVING
SIMULATORS," Proceedings of the Romanian Academy Series a-Mathematics
Physics Technical Sciences Information Science, vol. 16, pp. 531-538,
Oct-Dec 2015.

[116] N. Ilies, V. Farcas, C.
Gherman, V. Chiorean, and D. Popa, "SOILS EFFICIENT IMPROVEMENT
SOLUTIONS WITH WASTE MATERIALS AND BINDERS," Journal of Environmental
Protection and Ecology, vol. 16, pp. 1397-1406, 2015.

[117]
C. Ionescu and C. Muresan, "SLIDING MODE CONTROL FOR A CLASS OF
SUB-SYSTEMS WITH FRACTIONAL ORDER VARYING TRAJECTORY DYNAMICS,"
Fractional Calculus and Applied Analysis, vol. 18, pp. 1441-1451, Dec
2015.

[118] D. Ionita, M. Cristea, and D.
Banabic, "Viscoelastic behavior of PMMA in relation to deformation
mode," Journal of Thermal Analysis and Calorimetry, vol. 120, pp.
1775-1783, Jun 2015.

[119] D. Ionita, C. Gaina,
M. Cristea, and D. Banabic, "Tailoring the hard domain cohesiveness in
polyurethanes by interplay between the functionality and the content of
chain extender," Rsc Advances, vol. 5, pp. 76852-76861, 2015.

[120]
C. Ivan and R. Popa, "A Cloud Based Mobile Dispatching System with
Built-in Social CRM Component: Design and Implementation," Computers,
vol. 4, pp. 176-214, Sep 2015.

[121] M. Ivan, "A note on the Hermite interpolation," Numerical Algorithms, vol. 69, pp. 517-522, Jul 2015.

[122]
M. I. Jaffar, W. H. W. Badaruzzaman, M. M. A. Abdullah, S. Baharom, L.
M. Moga, and A. V. Sandu, "Relationship Between Panel Stiffness and
Mid-span Deflection in Profiled Steel Sheeting Dry Board with Geopolymer
Concrete Infill," Materiale Plastice, vol. 52, pp. 243-248, Jun 2015.

[123]
L. Jantschi and S. D. Bolboaca, "Distribution on Contingency of
Alignment of Two Literal Sequences Under Constrains," Acta
Biotheoretica, vol. 63, pp. 55-69, Mar 2015.

[124]
L. Jantschi, L. L. Pruteanu, A. C. Cozma, and S. D. Bolboaca, "Inside
of the Linear Relation between Dependent and Independent Variables,"
Computational and Mathematical Methods in Medicine, 2015.

[125]
R. Jeler, F. Rusu, and R. Balan, "COMFORT INDEX CALCULATION USING
ARTIFICIAL NEURAL NETWORKS," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 263-266, Jun 2015.

[126]
D. I. Julean, "Reportage: Romania and its Jewish museums," East
European Jewish Affairs, vol. 45, pp. 279-289, Sep 2015.

[127]
A. G. Jumolea and G. Arghir, "MECHANICAL PROPERTIES OF Al-Si COMPOSITE
MATERIALS OBTAINED BY STIR CASTING," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
591-596, Nov 2015.

[128] A. Kami, B. M.
Dariani, A. S. Vanini, D. S. Comsa, and D. Banabic, "Numerical
determination of the forming limit curves of anisotropic sheet metals
using GTN damage model," Journal of Materials Processing Technology,
vol. 216, pp. 472-483, Feb 2015.

[129] Z. I.
Kiss, Z. A. Polgar, M. P. Stef, and V. Bota, "Improving transmission
reliability in wireless sensor networks using network coding,"
Telecommunication Systems, vol. 59, pp. 509-521, Aug 2015.

[130]
A. Kozuk and P. Berce, "MATHEMATICAL MODELING OF A CNC MACHINE
STRUCTURE WITH 3+2 AXIS," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 87-92, Mar 2015.

[131]
A. Kozuk and P. Berce, "PERFORMANCE COMPARISION BETWEEN 3 AND 3+2 AXIS
MACHINING CAPABILITIES," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 93-96, Mar 2015.

[132]
C. Lapusan, R. Balan, C. Rad, and A. Plesa, "DEVELOPMENT OF A
MULTI-ROOM BUILDING THERMAL MODEL FOR USE IN THE DESIGN PROCESS OF
ENERGY MANAGEMENT SYSTEMS," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 41-48, Mar 2015.

[133]
S. Laszlo and A. Viorel, "GENERALIZED MONOTONE OPERATORS ON DENSE
SETS," Numerical Functional Analysis and Optimization, vol. 36, pp.
901-929, Jul 2015.

[134] S. Laszlo and A.
Viorel, "Densely Defined Equilibrium Problems," Journal of Optimization
Theory and Applications, vol. 166, pp. 52-75, Jul 2015.

[135]
I. Lazar, J. Kalmar, A. Peter, A. Szilagyi, E. Gyori, T. Ditroi, et
al., "Photocatalytic performance of highly amorphous titania-silica
aerogels with mesopores: The adverse effect of the in situ adsorption of
some organic substrates during photodegradation," Applied Surface
Science, vol. 356, pp. 521-531, Nov 2015.

[136]
D. Laze, G. Achimas, and I. T. Zelea, "MAINTENANCE OF THE BRAKE SISTEMS
IN THE COMMERCIAL VEHICLES," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 267-272, Jun 2015.

[137]
A. Lehmann, G. Giuliani, E. Mancosu, K. C. Abbaspour, S. Soezen, D.
Gorgan, et al., "Filling the gap between Earth observation and policy
making in the Black Sea catchment with enviroGRIDS," Environmental
Science & Policy, vol. 46, pp. 1-12, Feb 2015.

[138]
Z. Lendek, T. M. Guerra, and J. Lauber, "Controller Design for TS
Models Using Delayed Nonquadratic Lyapunov Functions," Ieee Transactions
on Cybernetics, vol. 45, pp. 453-464, Mar 2015.

[139]
D. Leordean, C. Dudescu, T. Marcu, P. Berce, and N. Balc, "Customized
implants with specific properties, made by selective laser melting,"
Rapid Prototyping Journal, vol. 21, pp. 98-104, 2015.

[140]
D. Leordean, S. A. Radu, D. Fratila, and P. Berce, "Studies on design
of customized orthopedic endoprostheses of titanium alloy manufactured
by SLM," International Journal of Advanced Manufacturing Technology,
vol. 79, pp. 905-920, Jul 2015.

[141] Q. Lu and
G. Liviu, "EXTRACTION OPTIMIZATION OF PECTIN FROM FRESH CITRUS PEEL
WITH RESPONSE SURFACE METHODOLOGY," Carpathian Journal of Food Science
and Technology, vol. 7, pp. 17-25, 2015.

[142]
O. Lucaciu, B. Crisan, L. Crisan, M. Baciut, O. Soritau, S. Bran, et
al., "In quest of optimal drug-supported and targeted bone regeneration
in the cranio facial area: a review of techniques and methods," Drug
Metabolism Reviews, vol. 47, pp. 455-469, Oct 2015.

[143]
C. Lungoci, D. Moga, V. Muresan, D. Petreus, N. Stroia, R. Moga, et
al., "Hyperthermic Intraperitoneal Chemotherapy Approach Based on
Cyber-Physical System Paradigm," Control Engineering and Applied
Informatics, vol. 17, pp. 50-59, Sep 2015.

[144]
N. Lungu and S. A. Ciplea, "Ulam-Hyers-Rassias stability of
pseudoparabolic partial differential equations," Carpathian Journal of
Mathematics, vol. 31, pp. 233-240, 2015.

[145]
I. Lupea, "A LUMPED MASS EXHAUST SYSTEM MODEL," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
509-512, Nov 2015.

[146] M. Lupsor-Platon, C.
Vicas, S. Nedevschi, H. Stefanescu, C. Radu, D. Crisan, et al., "THE USE
OF THE ATTENUATION COEFFICIENT COMPUTED ON THE ULTRASONIC IMAGE COULD
IMPROVE THE SPECIFICITY OF THE CLASSICAL ULTRASONOGRAPHIC EXAMINATION
FOR THE ASSESSMENT OF STEATOSIS GRADE IN DIFFUSE LIVER DISEASES
PATIENTS," Journal of Hepatology, vol. 62, pp. S720-S720, Apr 2015.

[147]
D. Maier, L. Anastasiu, R. Sarbu, and T. Eidenmuller, "MEASURING THE
CAPACITY OF ORGANIZATIONS INNOVATION-MAJOR PROCESS OF INNOVATION
MANAGEMENT," Amfiteatru Economic, vol. 17, pp. 1156-1166, Nov 2015.

[148]
S. Manzetti and F. Mariasiu, "Electric vehicle battery technologies:
From present state to future systems," Renewable & Sustainable
Energy Reviews, vol. 51, pp. 1004-1012, Nov 2015.

[149]
D. Marian, I. R. Peter, and C. Pintea, "A class of generalized monotone
operators," Journal of Mathematical Analysis and Applications, vol.
421, pp. 1827-1843, Jan 2015.

[150] F.
Mariasiu, "Numerical Investigation of the Effects of Biofuel
Characteristics on the Injector Nozzle Erosion Process," Tribology
& Lubrication Technology, vol. 71, pp. 44-+, Feb 2015.

[151]
F. Mariasiu, N. V. Burnete, D. Moldovanu, B. O. Varga, C. Iclodean, and
L. Kocsis, "EFFECTS OF BIOETHANOL ULTRASONIC GENERATED AEROSOLS
APPLICATION ON DIESEL ENGINE PERFORMANCES," Thermal Science, vol. 19,
pp. 1931-1941, 2015.

[152] T. F. Marinca, H. F.
Chicinas, B. V. Neamtu, O. Isnard, and I. Chicinas, "Structural,
thermal and magnetic characteristics of Fe3O4/Ni3Fe composite powder
obtained by mechanosynthesis-annealing route," Journal of Alloys and
Compounds, vol. 652, pp. 313-321, Dec 2015.

[153]
T. F. Marinca, I. Chicinas, O. Isnard, and B. V. Neamtu,
"Nanocrystalline/nanosized Fe3O4 particles obtained by heat treatment
and mechanical milling," Optoelectronics and Advanced Materials-Rapid
Communications, vol. 9, pp. 730-733, May-Jun 2015.

[154]
K. Marton and A. Suciu, "TOWARDS A METHODOLOGY FOR RANDOMNESS
ASSESSMENT: CHALLENGES AND PITFALLS," Proceedings of the Romanian
Academy Series a-Mathematics Physics Technical Sciences Information
Science, vol. 16, pp. 385-394, 2015.

[155] C.
Marutoiu, I. Bratu, A. M. Budu, G. Santa, O. F. Marutoiu, C. Neamtu, et
al., "Evaluation of Conservation State by Analysis of Imperial Gates'
Constituent Materials Belonging to A Aschileu Mic Wooden Church, Cluj
County," Revista De Chimie, vol. 66, pp. 992-996, Jul 2015.

[156]
O. Matei, P. C. Pop, J. L. Sas, and C. Chira, "An improved immigration
memetic algorithm for solving the heterogeneous fixed fleet vehicle
routing problem," Neurocomputing, vol. 150, pp. 58-66, Feb 2015.

[157]
K. Mathe and L. Busoniu, "Vision and Control for UAVs: A Survey of
General Methods and of Inexpensive Platforms for Infrastructure
Inspection," Sensors, vol. 15, pp. 14887-14916, Jul 2015.

[158]
A. Mendez, Y. Reyes, G. Trejo, K. Stepien, and S. Talu,
"Micromorphological Characterization of Zinc/Silver Particle Composite
Coatings," Microscopy Research and Technique, vol. 78, pp. 1082-1089,
Dec 2015.

[159] V. Merie, M. Pustan, G. Negrea,
and C. Birleanu, "Research on titanium nitride thin films deposited by
reactive magnetron sputtering for MEMS applications," Applied Surface
Science, vol. 358, pp. 525-532, Dec 2015.

[160]
A. Mesaros, R. B. Mos, M. Nasui, T. Petrisor, D. Toloman, O. R. Vasile,
et al., "Insights into the europium-doped yttrium oxalate thermal
decomposition mechanism," Journal of Analytical and Applied Pyrolysis,
vol. 116, pp. 96-101, Nov 2015.

[161] A.
Mesaros, D. Toloman, M. Nasui, R. B. Mos, T. Petrisor, B. S. Vasile, et
al., "A valence states approach for luminescence enhancement by low
dopant concentration in Eu-doped ZnO nanoparticles," Journal of
Materials Science, vol. 50, pp. 6075-6086, Sep 2015.

[162]
T. Micu, D. Micu, and D. Stet, "A GEOMETRICAL METHOD FOR CONDUCTING
SPHERES IN ELECTROSTATIC FIELD," Revue Roumaine Des Sciences
Techniques-Serie Electrotechnique Et Energetique, vol. 60, pp. 345-354,
Oct-Dec 2015.

[163] C. S. Miron-Borzan, M. C.
Dudescu, K. Abd Elghany, V. Ceclan, and P. Berce, "Analysis of
Mechanical Proprieties of Selective Laser Sintered Polyamide Parts
Obtained on Different Equipment," Materiale Plastice, vol. 52, pp.
39-42, Mar 2015.

[164] F. Mocean, G. Achimas,
P. Bere, and S. Achimas, "THE MECHANICAL CHARACTERISTICS OF COMPOSITE
MATERIALS USED FOR THE REHABILITATION OF CANALS BY MEANS OF LINING,"
Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 97-104, Mar 2015.

[165]
M. Moldovan, D. Prodan, V. Popescu, C. Prejmerean, C. Sarosi, M.
Saplontai, et al., "Structural and morphological properties of HA-ZnO
powders prepared for biomaterials," Open Chemistry, vol. 13, pp.
725-733, Jan 2015.

[166] M. S. Moldovan,
"Pilgrimage and Its Infrastructure in Post-communist Transylvania,"
Transylvanian Review, vol. 24, pp. 70-84, Fal 2015.

[167]
A. Molea, V. Popescu, and N. A. Rowson, "A comparative study of the
photo-catalytic performance of amorphous and nano-crystalline TiO2,"
Optoelectronics and Advanced Materials-Rapid Communications, vol. 9, pp.
431-435, Mar-Apr 2015.

[168] A. Molea, V.
Popescu, N. A. Rowson, I. Cojocaru, A. Dinescu, A. Dehelean, et al.,
"Correlation of Physicochemical Properties with the Catalytic
Performance of Fe-Doped Titanium Dioxide Powders," Industrial &
Engineering Chemistry Research, vol. 54, pp. 7346-7351, Aug 2015.

[169]
R. B. Mos, M. Nasui, T. Petrisor, A. Mesaros, L. Ciontea, and T.
Petrisor, "The thermal decomposition of metal-organic precursors for
epitaxial growth of SrZrO3 thin films," Journal of Analytical and
Applied Pyrolysis, vol. 115, pp. 255-261, Sep 2015.

[170]
S. C. Mosneag, V. Popescu, C. Neamtu, and G. Borodi, "Study on the
removal of nitrate in groundwater from Capus, Cluj county by natural
zeolite of Mirsid and granular activated carbon," Desalination and Water
Treatment, vol. 56, pp. 3313-3322, Dec 2015.

[171]
A. Muntean, I. Smical, and E. Nour, "The Influence of the Weather and
Climatic Conditions and some Hydrological and Chemical Characteristics
of the Some. River, in the NW part of Romania," Geographica Pannonica,
vol. 19, pp. 1-8, Mar 2015.

[172] D. F.
Muntean, I. Ivan, and L. Muresan, "ENVIRONMENTAL IMPLICATIONS CONCERNING
THE CHEMICAL COMPOSITION AND PARTICLE DISTRIBUTION OF ANTI - SKID
MATERIAL," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp.
207-218, Jun 2015.

[173] M. Muntean, H. Valean,
and L. Cabulea, "Improving classification with IF-THEN rules for
multidimensional datasets," Control Engineering and Applied Informatics,
vol. 17, pp. 42-49, Dec 2015.

[174] L.
Munteanu, V. Chiroiu, C. Brisan, D. Dumitriu, T. Sireteanu, and S.
Petre, "On the 3D normal tire/off-road vibro-contact problem with
friction," Mechanical Systems and Signal Processing, vol. 54-55, pp.
377-393, Mar 2015.

[175] L. Munteanu, D.
Dumitriu, V. Chiroiu, C. Brisan, M. Bara, and D. Marin, "On the Tactile
Sensing Based on the Smart Materials," Cmc-Computers Materials &
Continua, vol. 46, pp. 79-103, Mar 2015.

[176]
C. I. Muresan, E. H. Dulf, and R. Both, "Comparative Analysis of
Different Control Strategies for a Train of Cryogenic C-13 Separation
Columns," Chemical Engineering & Technology, vol. 38, pp. 619-631,
Apr 2015.

[177] C. I. Muresan, C. Ionescu, S.
Folea, and R. De Keyser, "Fractional order control of unstable
processes: the magnetic levitation study case," Nonlinear Dynamics, vol.
80, pp. 1761-1772, Jun 2015.

[178] R. Muresan,
"STUDY ON THE ACTIVATED SINTERING OF MECHANICALLY PROCESSED TUNGSTEN
POWDERS," Acta Technica Napocensis Series-Applied Mathematics Mechanics
and Engineering, vol. 58, pp. 195-198, Jun 2015.

[179]
V. Muresan and A. S. Muresan, "On the theory of fixed point theorems
for convex contraction mappings," Carpathian Journal of Mathematics,
vol. 31, pp. 365-371, 2015.

[180] M. Nasui, T.
Petrisor, R. B. Mos, M. S. Gabor, A. Mesaros, F. Goga, et al.,
"Fluorine-free propionate route for the chemical solution deposition of
YBa2Cu3O7-x superconducting films," Ceramics International, vol. 41, pp.
4416-4421, Apr 2015.

[181] M. I. Neagu, L.
Miclea, and S. Manich, "Improving security in cache memory by power
efficient scrambling technique," Iet Computers and Digital Techniques,
vol. 9, pp. 283-292, Nov 2015.

[182] B. V.
Neamtu, T. F. Marinca, I. Chicinas, and O. Isnard, "Structural, magnetic
and thermal characterization of amorphous FINEMET powders prepared by
wet mechanical alloying," Journal of Alloys and Compounds, vol. 626, pp.
49-55, Mar 2015.

[183] B. V. Neamtu, T. F.
Marinca, I. Chicinas, O. Isnard, and F. Popa, "Structural and magnetic
characteristics of Co-based amorphous powders prepared by wet mechanical
alloying," Advanced Powder Technology, vol. 26, pp. 323-328, Jan 2015.

[184]
C. Neamtu, S. Bodi, R. A. Ghinea, and A. Papp, "FAILURE MODE AND EFFECT
ANALYSIS FOR MOLD DESIGN," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 533-536, Nov 2015.

[185]
C. Neamtu, R. Comes, R. Bolba, and R. A. Ghinea, "IMPROVING THE DESIGN
OF PLASTIC ANCHORS FOR POLYSTYRENE," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
525-532, Nov 2015.

[186] I. Negrean, K. Kacso,
and A. F. Cristea, "NEW FORMULATIONS ON THE ACCELERATION ENERGY OF FIRST
AND SECOND ORDER APPLIED IN ANALYTICAL MECHANICS," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 179-186, Jun 2015.

[187] I. Negrean, K.
Kacso, and A. F. Cristea, "NEW FORMULATIONS ON THE ACCELERATION ENERGY
OF SECOND AND THIRD ORDER APPLIED IN ANALYTICAL MECHANICS," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 187-194, Jun 2015.

[188]
M. Negru, S. Nedevschi, and R. I. Peter, "Exponential Contrast
Restoration in Fog Conditions for Driving Assistance," Ieee Transactions
on Intelligent Transportation Systems, vol. 16, pp. 2257-2268, Aug
2015.

[189] N. Neidoni and M. Buzdugan, "A
REINFORCING METHOD OF CORRUGATED FIBERBOARD BOXES," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 67-72, Mar 2015.

[190] R. Nemati-Chari,
K. Dehghani, A. Kami, and D. Banabic, "APPLICATION OF RESPONSE SURFACE
METHODOLOGY FOR STUDY OF EFFECTIVE STRAIN IN EQUAL CHANNEL ANGULAR
PRESSING OF AA6061 ALLOY," Proceedings of the Romanian Academy Series
a-Mathematics Physics Technical Sciences Information Science, vol. 16,
pp. 217-225, Apr-Jun 2015.

[191] A. Novac and
R. Precup, "VARIATIONAL PROPERTIES OF THE SOLUTIONS FOR SECOND-ORDER
DIFFERENTIAL EQUATIONS AND SYSTEMS ON SEMI-LINE," Numerical Functional
Analysis and Optimization, vol. 36, pp. 930-941, Jul 2015.

[192]
S. Noveanu, N. Lobontiu, J. Lazaro, and D. Mandru, "Substructure
compliance matrix model of planar branched flexure-hinge mechanisms:
Design, testing and characterization of a gripper," Mechanism and
Machine Theory, vol. 91, pp. 1-20, Sep 2015.

[193]
M. Olaru, V. Dinu, T. Keppler, B. Mocan, and A. Mateiu, "STUDY ON THE
OPEN INNOVATION PRACTICES IN ROMANIAN SMEs," Amfiteatru Economic, vol.
17, pp. 1129-1141, Nov 2015.

[194] S. Oniga and
S. Jozsef, "Optimal Recognition Method of Human Activities Using
Artificial Neural Networks," Measurement Science Review, vol. 15, pp.
323-327, Dec 2015.

[195] A. Paljanos, S.
Miclaus, and C. Munteanu, "Occupational exposure of personnel operating
military radio equipment: measurements and simulation," Electromagnetic
Biology and Medicine, vol. 34, pp. 221-227, Jul 2015.

[196]
V. G. Patai, G. Achimas, and G. Pintye, "STATIONARY GAS FLOW FROM A
TANK," Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 105-110, Mar 2015.

[197]
A. Peter, L. Mihaly-Cozmuta, A. Mihaly-Cozmuta, C. Nicula, C. Cadar, A.
Jastrzebska, et al., "Silver functionalized titania-silica xerogels:
Preparation, morpho-structural and photocatalytic properties, kinetic
modeling," Journal of Alloys and Compounds, vol. 648, pp. 890-902, Nov
2015.

[198] A. Peter, L. Mihaly-Cozmuta, A.
Mihaly-Cozmuta, C. Nicula, A. Jastrzebska, P. Kurtycz, et al.,
"Morphology, structure, and photoactivity of two types of graphene
oxide-TiO2 composites," Chemical Papers, vol. 69, pp. 839-855, Jun 2015.

[199]
A. Peter, D. Tegla, L. Giurgiulescu, A. M. Cozmuta, C. Nicula, L. M.
Cozmuta, et al., "DEVELOPMENT OF Ag/TiO2-SiO2-COATED FOOD PACKAGING FILM
AND ITS ROLE IN PRESERVATION OF GREEN LETTUCE DURING STORAGE,"
Carpathian Journal of Food Science and Technology, vol. 7, pp. 88-96,
2015.

[200] C. M. Pintea, "A Unifying Survey of
Agent-Based Approaches for Equality-Generalized Traveling Salesman
Problem," Informatica, vol. 26, pp. 509-522, 2015.

[201]
C. M. Pintea and P. C. Pop, "An improved hybrid algorithm for
capacitated fixed-charge transportation problem," Logic Journal of the
Igpl, vol. 23, pp. 369-378, Jun 2015.

[202] G.
Pintye, G. Achimas, and G. Patai, "TECHNOLOGICAL ASPECTS ON GLASS
ASSEMBLED BY GLUING ON THE METAL SUPPORT," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
111-118, Mar 2015.

[203] N. Plitea, A.
Szilaghyi, and D. Pisla, "Kinematic analysis of a new 5-DOF modular
parallel robot for brachytherapy," Robotics and Computer-Integrated
Manufacturing, vol. 31, pp. 70-80, Feb 2015.

[204]
A. Pop and I. Ardelean, "Monitoring the size evolution of capillary
pores in cement paste during the early hydration via diffusion in
internal gradients," Cement and Concrete Research, vol. 77, pp. 76-81,
Nov 2015.

[205] A. Pop and M. S. Pop, "A
GENERALIZATION OF HYERS-ULAM STABILITY ON m-SEMIGROUPS," Miskolc
Mathematical Notes, vol. 16, pp. 407-421, 2015.

[206]
D. Pop, "EXPERIENCING THE RELATIONSHIP BETWEEN ARCHITECTURAL SPACE AND
THE MAJOR SPACE PHOBIAS," Urbanism Architecture Constructions, vol. 6,
pp. 33-44, 2015.

[207] O. Pop, A. Abrudan, and
I. Pop, "CLOSED EXPANSION VESSEL DIMENSIONING - PART III," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 137-144, Mar 2015.

[208] P. C. Pop, C.
M. Pintea, C. P. Sitar, and M. Hajdu-Macelaru, "An efficient Reverse
Distribution System for solving sustainable supply chain network design
problem," Journal of Applied Logic, vol. 13, pp. 105-113, Jun 2015.

[209]
S. Pop, D. Pitica, and V. Bande, "Analyzing a Vibrating Wire Transducer
using Coupled Resonator Circuits," Advances in Electrical and Computer
Engineering, vol. 15, pp. 87-92, 2015.

[210] S.
I. Pop, M. Dudescu, D. C. Bratu, V. V. Merie, and M. Pacurar, "Effect
of Esthetic Coating on the Load Deflection and Surface Characteristics
of the NiTi Orthodontic Archwires," Revista De Chimie, vol. 66, pp.
364-367, Mar 2015.

[211] V. Pop, "PARTITIONS OF
THE SET OF POSITIVE INTEGERS IN TRANSLATED SETS," Journal of Science
and Arts, pp. 211-214, 2015.

[212] M. Popa, R.
Bostan, N. Ilie, and S. Varvara, "NATURAL SORBENTS USED FOR THE REMOVAL
OF HEAVY METALS FROM ACIDIC WASTEWATERS GENERATED AT `VALEA SESEI'
TAILING POND FROM ROSIA POENI MINING PERIMETER (ROMANIA)," Journal of
Environmental Protection and Ecology, vol. 16, pp. 839-849, 2015.

[213]
D. Popescu, F. Popister, A. Eles, and R. Comes, "IMPROVING THE QUALITY
OF PLASTIC PARTS OBTAINED BY 3D PRINTING," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
25-30, Mar 2015.

[214] G. L. Popescu, N. Filip,
A. Molea, and V. Popescu, "THE EFFECT OF USING PYROLYSIS OILS FROM
POLYETHYLENE AND DIESEL ON THE POLLUTANT EMISSIONS FROM A SINGLE
CYLINDER DIESEL ENGINE," Studia Universitatis Babes-Bolyai Chemia, vol.
60, pp. 273-288, Dec 2015.

[215] T. Popescu, A.
C. Kacso, D. Pisla, and G. Kacso, "Brachytherapy next generation:
robotic systems," Journal of Contemporary Brachytherapy, vol. 7, pp.
510-514, Nov-Dec 2015.

[216] V. Popescu, A.
Molea, A. Dinescu, C. Rusu-Trisca, M. Moldovan, and G. L. Popescu,
"OPTICAL PROPERTIES OF PbS CRYSTALS OBTAINED ON GLASS SUBSTRATE FROM
SOLUTIONS CONTAINING HYDROXYLAMINE HYDROCHLORIDE IN AN ULTRASONIC
BATHS," Chalcogenide Letters, vol. 12, pp. 363-373, Jul 2015.

[217]
V. Popescu, S. Nedevschi, R. Danescu, and T. Marita, "A Lane Assessment
Method Using Visual Information Based on a Dynamic Bayesian Network,"
Journal of Intelligent Transportation Systems, vol. 19, pp. 225-239, Jul
2015.

[218] A. Popovici, O. Corbu, G. E.
Popita, C. Rosu, M. Proorocu, A. V. Sandu, et al., "Modern Mortars with
Electronic Waste Scraps (Glass and Plastic)," Materiale Plastice, vol.
52, pp. 588-592, Dec 2015.

[219] A. Popovici,
G. E. Popita, O. Corbu, T. Rusu, C. Rosu, M. Proorocu, et al.,
"UNCONVENTIONAL MORTARS WITH RECYCLED CATHODE RAY TUBES WASTE GLASS,"
Environmental Engineering and Management Journal, vol. 14, pp.
2661-2670, Nov 2015.

[220] M. Pustan, C.
Dudescu, and C. Birleanu, "The effect of sensing area position on the
mechanical response of mass-detecting cantilever sensor," Microsystem
Technologies-Micro-and Nanosystems-Information Storage and Processing
Systems, vol. 21, pp. 1827-1834, Sep 2015.

[221]
M. Pustan, C. Dudescu, and C. Birleanu, "Nanomechanical and
nanotribological characterization of a MEMS micromembrane supported by
two folded hinges," Analog Integrated Circuits and Signal Processing,
vol. 82, pp. 627-635, Mar 2015.

[222] H. Z. Qin
and O. Furdui, "Three open problems and a conjecture," Open
Mathematics, vol. 13, pp. 729-736, Oct 2015.

[223]
M. Rada, L. Rus, S. Rada, P. Pascuta, S. Stan, N. Dura, et al., "Role
of vanadium ions on structural, optical and electrochemical properties
of the vanadate-lead glasses," Journal of Non-Crystalline Solids, vol.
414, pp. 59-65, Apr 2015.

[224] S. Rada, L.
Rus, M. Rada, E. Culea, N. Aldea, S. Stan, et al., "Synthesis,
structure, optical and electrochemical properties of the lead
sulfate-lead dioxide-lead glasses and vitroceramics," Solid State
Ionics, vol. 274, pp. 111-118, Jun 2015.

[225]
S. A. Radu, V. D. Leordean, N. Balc, and O. Nemes, "RESIN TYPE INFLUENCE
ON MOULDED PARTS FINAL DIMENSIONS," Studia Universitatis Babes-Bolyai
Chemia, vol. 60, pp. 219-228, Jun 2015.

[226]
C. Radulescu, R. Toader, G. Boca, M. Abrudan, C. Anghel, and D. C.
Toader, "Sustainable Development in Maramures County," Sustainability,
vol. 7, pp. 7622-7643, Jun 2015.

[227] I. Rasa,
"Entropies and Heun functions associated with positive linear
operators," Applied Mathematics and Computation, vol. 268, pp. 422-431,
Oct 2015.

[228] Y. Reyes-Vidal, R.
Suarez-Rojas, C. Ruiz, J. Torres, S. Talu, A. Mendez, et al.,
"Electrodeposition, characterization, and antibacterial activity of
zinc/silver particle composite coatings," Applied Surface Science, vol.
342, pp. 34-41, Jul 2015.

[229] M. D. Roman, R.
A. Felseghi, and M. V. Muresan, "MODELLING AND SIMULATION OF BOD AND
COD FOR EFFLUENT LEVELS OF AN AERATION TANK FROM GHERLA WASTE WATER
TREATMENT PLANT," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp.
399-408, Jun 2015.

[230] C. Rosu, G. E.
Popita, D. Manciula, A. Popovici, O. Corbu, and A. Cozma, "TANNED
LEATHER WASTE: A HAZARDOUS WASTE OR NOT?," Journal of Environmental
Protection and Ecology, vol. 16, pp. 899-907, 2015.

[231]
V. Rus, A. Hegyi, H. Vermesan, and A. E. Tiuc, "KINETICS OF THE
CORROSION PROCESS OF HOT DIP GALVANIZED STEEL REINFOCEMENT IN FRESH
CONCRETE," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp.
409-419, Jun 2015.

[232] F. Rusu, I. Craciun,
and L. Tudose, "STATISTICAL EVALUATION OF AESTHETIC SHAPES," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 553-558, Nov 2015.

[233]
F. Rusu, M. Pustan, C. Birleanu, R. Muller, R. Voicu, and A. Baracu,
"Analysis of the surface effects on adhesion in MEMS structures,"
Applied Surface Science, vol. 358, pp. 634-640, Dec 2015.

[234]
F. Rusu, L. Tudose, and C. Tudose, "BEARING LIFE APPROXIMATION USING
KRIGING," Acta Technica Napocensis Series-Applied Mathematics Mechanics
and Engineering, vol. 58, pp. 219-224, Jun 2015.

[235]
A. M. Salantiu, C. Fekete, L. Muresan, P. Pascuta, F. Popa, and C.
Popa, "Anodic oxidation of PM porous titanium for increasing the
corrosion resistance of endosseous implants," Materials Chemistry and
Physics, vol. 149, pp. 453-459, Jan 2015.

[236]
A. M. Salantiu, O. Soritau, N. Dirzu, F. Popa, L. Muresan, V. Popescu,
et al., "POROUS TITANIUM - AN ENHANCED SUPPORT FOR HUMAN OSTEOBLASTS
AFTER ANODIZATION AND c-RGD IMMOBILIZATION," Studia Universitatis
Babes-Bolyai Chemia, vol. 60, pp. 45-58, Jun 2015.

[237]
T. Sanislav, "DEPONTO: A Reusable Dependability Domain Ontology," Tem
Journal-Technology Education Management Informatics, vol. 4, pp.
223-228, Aug 2015.

[238] L. Scurtu, L.
Banfalvi, R. Curta, and A. Steopan, "USING VIBRATIONS IN SMART FURNITURE
DESIGN," Acta Technica Napocensis Series-Applied Mathematics Mechanics
and Engineering, vol. 58, pp. 49-52, Mar 2015.

[239]
L. I. Scurtu, S. Bodi, and M. Dragomir, "OPTIMIZATION METHODS APPLIED
IN CAD BASED FURNITURE DESIGN," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 559-562, Nov 2015.

[240]
R. Shikhgasan, T. Stefan, S. Dinara, S. Sebastian, and R. Guseyn,
"Epitaxy of silicon carbide on silicon: Micromorphological analysis of
growth surface evolution," Superlattices and Microstructures, vol. 86,
pp. 395-402, Oct 2015.

[241] D. Simon, C.
Boianceanu, G. De Mey, and V. Topa, "Experimental Reliability
Improvement of Power Devices Operated Under Fast Thermal Cycling," Ieee
Electron Device Letters, vol. 36, pp. 696-698, Jul 2015.

[242]
A. Sintamarian, "SHARP ESTIMATES REGARDING THE REMAINDER OF THE
ALTERNATING HARMONIC SERIES," Mathematical Inequalities &
Applications, vol. 18, pp. 347-352, Jan 2015.

[243]
R. S. Sipos, R. Fechete, R. I. Chelcea, D. Moldovan, Z. Pap, Z. Pavai,
et al., "Ovariectomized rats' femur treated with fibrates and statins.
Assessment of pore-size distribution by H-1-NMR relaxometry," Romanian
Journal of Morphology and Embryology, vol. 56, pp. 743-752, 2015.

[244]
R. S. Sipos, R. Fechete, D. Moldovan, I. Sus, S. Szasz, and Z. Pavai,
"Assessment of femoral bone osteoporosis in rats treated with
simvastatin or fenofibrate," Open Life Sciences, vol. 10, pp. 379-387,
Jan 2015.

[245] I. Smical, A. Muntean, and E.
Nour, "Research on the Surface Water Quality in Mining Influenced Area
in North-Western part of Romania," Geographica Pannonica, vol. 19, pp.
20-30, Mar 2015.

[246] K. Sodjavi, B. Montagne,
P. Braganca, A. Meslem, F. Bode, and M. Kristiawan, "Impinging
cross-shaped submerged jet on a flat plate: a comparison of plane and
hemispherical orifice nozzles," Meccanica, vol. 50, pp. 2927-2947, Dec
2015.

[247] S. Solcan, C. Neamtu, R. Ghinea,
and S. Bodi, "USING TRIZ METHOD FOR SUPPORT INNOVATION IN DEVELOPING
PLASTIC PARTS," Acta Technica Napocensis Series-Applied Mathematics
Mechanics and Engineering, vol. 58, pp. 605-608, Nov 2015.

[248]
C. G. Sopoian and I. Blebea, "NUMERICAL RESEARCH IN THE FIELD OF
PREVENTIVE MAINTENANCE OF TECHNICAL SYSTEMS," Acta Technica Napocensis
Series-Applied Mathematics Mechanics and Engineering, vol. 58, pp.
285-292, Jun 2015.

[249] M. B. Soporan and O.
Nemes, "QUANTITATIVE ANALYSIS OF THE NONCOMPLIANT LANDFILL
CONSTITUENTS," Studia Universitatis Babes-Bolyai Chemia, vol. 60, pp.
201-206, Jun 2015.

[250] V. F. Soporan, L.
Nascutiu, B. Soporan, and C. Pavai, "Case studies of methane dispersion
patterns and odor strength in vicinity of municipal solid waste landfill
of Cluj-Napoca, Romania, using numerical modeling," Atmospheric
Pollution Research, vol. 6, pp. 312-321, Mar 2015.

[251]
S. Stach, D. Dallaeva, S. Talu, P. Kaspar, P. Tomanek, S. Giovanzana,
et al., "Morphological features in aluminum nitride epilayers prepared
by magnetron sputtering," Materials Science-Poland, vol. 33, pp.
175-184, Mar 2015.

[252] S. Stach, Z. Garczyk,
S. Talu, S. Solaymani, A. Ghaderi, R. Moradian, et al., "Stereometric
Parameters of the Cu/Fe NPs Thin Films," Journal of Physical Chemistry
C, vol. 119, pp. 17887-17898, Aug 2015.

[253]
A. A. Stashkevich, M. Belmeguenai, Y. Roussigne, S. M. Cherif, M.
Kostylev, M. Gabor, et al., "Experimental study of spin-wave dispersion
in Py/Pt film structures in the presence of an interface
Dzyaloshinskii-Moriya interaction," Physical Review B, vol. 91, Jun
2015.

[254] I. V. Sucala, "Managers of
Transition-Leadership in Post-Communist Romanian Companies," Europe-Asia
Studies, vol. 67, pp. 652-670, Apr 2015.

[255]
I. V. Sucala and A. Sava, "The Attitude of Romanian Industrial
Companies towards the Market during the Transition," Acta Polytechnica
Hungarica, vol. 12, pp. 81-99, 2015.

[256] M.
Sys, Z. Riha, V. Matyas, K. Marton, and A. Suciu, "On the Interpretation
of Results from the NIST Statistical Test Suite," Romanian Journal of
Information Science and Technology, vol. 18, pp. 18-32, 2015.

[257]
S. Talu, M. Bramowicz, S. Kulesza, A. Shafiekhani, A. Ghaderi, F.
Mashayekhi, et al., "Microstructure and Tribological Properties of
FeNPs@a-C:H Films by Micromorphology Analysis and Fractal Geometry,"
Industrial & Engineering Chemistry Research, vol. 54, pp.
8212-8218, Aug 2015.

[258] S. Talu, D. M.
Calugaru, and C. A. Lapascu, "Characterisation of human
non-proliferative diabetic retinopathy using the fractal analysis,"
International Journal of Ophthalmology, vol. 8, pp. 770-776, Aug 2015.

[259]
S. Talu, N. Patra, and M. Salerno, "Micromorphological characterization
of polymer-oxide nanocomposite thin films by atomic force microscopy
and fractal geometry analysis," Progress in Organic Coatings, vol. 89,
pp. 50-56, Dec 2015.

[260] S. Talu, S. Stach,
S. F. Alb, and M. Salerno, "Multifractal characterization of a dental
restorative composite after air-polishing," Chaos Solitons &
Fractals, vol. 71, pp. 7-13, Feb 2015.

[261] S.
Talu, S. Stach, T. Ghodselahi, A. Ghaderi, S. Solaymani, A. Boochani,
et al., "Topographic Characterization of Cu-Ni NPs @ a-C:H Films by AFM
and Multifractal Analysis," Journal of Physical Chemistry B, vol. 119,
pp. 5662-5670, Apr 2015.

[262] S. Talu, S.
Stach, B. Klaic, T. Misic, J. Malina, and A. Celebic, "Morphology of
Co-Cr-Mo dental alloy surfaces polished by three different mechanical
procedures," Microscopy Research and Technique, vol. 78, pp. 831-839,
Sep 2015.

[263] S. Talu, S. Stach, T. Lainovic,
M. Vilotic, L. Blazic, S. F. Alb, et al., "Surface roughness and
morphology of dental nanocomposites polished by four different
procedures evaluated by a multifractal approach," Applied Surface
Science, vol. 330, pp. 20-29, Mar 2015.

[264]
S. Talu, S. Stach, D. Raoufi, and F. Hosseinpanahi, "Film Thickness
Effect on Fractality of Tin-Doped In2O3 Thin Films," Electronic
Materials Letters, vol. 11, pp. 749-757, Sep 2015.

[265]
S. Talu, S. Stach, S. Solaymani, R. Moradian, A. Ghaderi, M. R.
Hantehzadeh, et al., "Multifractal spectra of atomic force microscope
images of Cu/Fe nanoparticles based films thickness," Journal of
Electroanalytical Chemistry, vol. 749, pp. 31-41, Jul 2015.

[266]
S. Talu, S. Stach, V. Sueiras, and N. M. Ziebarth, "Fractal Analysis of
AFM Images of the Surface of Bowman's Membrane of the Human Cornea,"
Annals of Biomedical Engineering, vol. 43, pp. 906-916, Apr 2015.

[267]
S. Talu, S. Stach, S. Valedbagi, R. Bavadi, S. M. Elahi, and M. Talu,
"Multifractal characteristics of titanium nitride thin films," Materials
Science-Poland, vol. 33, pp. 541-548, Sep 2015.

[268]
S. Talu, S. Stach, S. Valedbagi, S. M. Elahi, and R. Bavadi, "Surface
morphology of titanium nitride thin films synthesized by DC reactive
magnetron sputtering," Materials Science-Poland, vol. 33, pp. 137-143,
Mar 2015.

[269] S. Talu, K. Stepien, and M. O.
Caglayan, "Topographic characterization of unworn contact lenses
assessed by atomic force microscopy and wavelet transform," Microscopy
Research and Technique, vol. 78, pp. 1026-1031, Nov 2015.

[270]
S. Talu, C. Vladutiu, and C. A. Lupascu, "Characterization of human
retinal vessel arborisation in normal and amblyopic eyes using
multifractal analysis," International Journal of Ophthalmology, vol. 8,
pp. 996-1002, Oct 2015.

[271] P. D. Teodosescu,
M. Bojan, I. C. Vese, and R. Marschalko, "RESEARCH CONCERNING UNIFIED
ELECTRONIC LIGHTING DEVICES," Proceedings of the Romanian Academy Series
a-Mathematics Physics Technical Sciences Information Science, vol. 16,
pp. 226-234, Apr-Jun 2015.

[272] M. Tertis, A.
Florea, B. Feier, I. O. Marian, L. Silaghi-Dumitrescu, A. Cristea, et
al., "Electrochemical Impedance Studies on Single and Multi-Walled
Carbon Nanotubes-Polymer Nanocomposites for Biosensors Development,"
Journal of Nanoscience and Nanotechnology, vol. 15, pp. 3385-3393, May
2015.

[273] A. E. Tiuc, O. Nemes, I. Perhaita,
H. Vermesan, T. Gabor, and V. Dan, "THERMAL BEHAVIOUR OF POLYURETHANE
MATRIX COMPOSITE MATERIALS," Studia Universitatis Babes-Bolyai Chemia,
vol. 60, pp. 169-176, Jun 2015.

[274] T. Tiuca,
C. Rusu, S. Noveanu, S. Besoiu, and D. Mandru, "THE SIMULATION AND THE
INTERFACE OF THE MECHANISMS USED IN MICROFACTORIES," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 609-612, Nov 2015.

[275] C. C. Todea,
"Symmetric cohomology of groups as a Mackey functor," Bulletin of the
Belgian Mathematical Society-Simon Stevin, vol. 22, pp. 49-58, Mar 2015.

[276]
C. C. Todea, "A theorem of Mislin for cohomology of fusion systems and
applications to block algebras of finite groups," Expositiones
Mathematicae, vol. 33, pp. 526-534, 2015.

[277]
R. Todoran, D. Todoran, and Z. Szakacs, "Valence band gaps and plasma
energies for galena, sphalerite, and chalcopyrite natural minerals using
differential optical reflectance spectroscopy," Russian Journal of
Physical Chemistry A, vol. 89, pp. 2422-2425, Dec 2015.

[278]
A. Todorut, N. Cordos, I. Barabas, and M. Balcau, "ASPECTS REGARDING
THE NUMERICAL MODELLING OF PEDESTRIAN-VEHICLE ACCIDENTS WHEN BOTH
PARTIES HAVE CONTINUOUS VISIBILITY OF EACH OTHER IN TRAFFIC," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 537-546, Nov 2015.

[279]
A. Todorut, N. Cordos, I. Barabas, and M. Balcau, "THE EVALUATION OF
KINEMATIC MEASURES WHICH CHARACTERIZE THE VEHICLE-PEDESTRIAN ACCIDENTS,"
Acta Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 31-40, Mar 2015.

[280]
C. Tosa, D. Antov, G. Kollo, H. Rouk, and M. Rannala, "A METHODOLOGY
FOR MODELLING TRAFFIC RELATED EMISSIONS IN SUBURBAN AREAS," Transport,
vol. 30, pp. 80-87, Jan 2015.

[281] A. C. Tot
and M. Arghir, "QUANTIFYING ACOUSTIC, MECHANICAL AND ELECTRICAL
PHENOMENA OF A DEVICE FOR THE DETERMINATION OF SOUND-ABSORBING
COEFFICIENT," Acta Technica Napocensis Series-Applied Mathematics
Mechanics and Engineering, vol. 58, pp. 119-124, Mar 2015.

[282]
A. Trif and C. M. Nedezki, "RESEARCH REGARDING THE EVOLUTION OF
TEMPERATURE IN CASE OF DRY TURNING OF AN ALUMINUM ALLOY," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 547-552, Nov 2015.

[283] F. L. Ureche,
V. F. Soporan, and G. Contiu, "CONSIDERATIONS AND APPRECIATIONS ON THE
MODELING OF THE TECHNOLOGICAL PROCESS OF WIRE EROSION PROCESSING," Acta
Technica Napocensis Series-Applied Mathematics Mechanics and
Engineering, vol. 58, pp. 293-298, Jun 2015.

[284]
L. Vacariu, A. Hangan, and M. Mocanu, "POLLUTION DETECTION ON THE
CYBERWATER PLATFORM," Environmental Engineering and Management Journal,
vol. 14, pp. 2043-2050, Sep 2015.

[285] J. A.
Valles and R. Galatus, "Modeling of Yb3+/Er3+-codoped microring
resonators," Optical Materials, vol. 41, pp. 126-130, Mar 2015.

[286]
B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Principles of
Modeling and Simulation Processes," in Electric and Plug-in Hybrid
Vehicles: Advanced Simulation Methodologies, ed, 2015, pp. 1-8.

[287]
B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Mathematics
Behind the Models," in Electric and Plug-in Hybrid Vehicles: Advanced
Simulation Methodologies, ed, 2015, pp. 9-201.

[288]
B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Virtual
Powertrain Design," in Electric and Plug-in Hybrid Vehicles: Advanced
Simulation Methodologies, ed, 2015, pp. 203-221.

[289]
B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Classical
Powertrain Configuration Model and Simulation," in Electric and Plug-in
Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp.
223-287.

[290] B. O. Varga, F. Mariasiu, D.
Moldovanu, and C. Iclodean, "Hybrid Powertrain Configuration Model and
Simulation," in Electric and Plug-in Hybrid Vehicles: Advanced
Simulation Methodologies, ed, 2015, pp. 289-385.

[291]
B. O. Varga, F. Mariasiu, D. Moldovanu, and C. Iclodean, "Electric
Powertrain Configuration Model and Simulation," in Electric and Plug-in
Hybrid Vehicles: Advanced Simulation Methodologies, ed, 2015, pp.
387-462.

[292] B. O. Varga, F. Mariasiu, D.
Moldovanu, and C. Iclodean, "Creating Virtual Road Infrastructure," in
Electric and Plug-in Hybrid Vehicles: Advanced Simulation Methodologies,
ed, 2015, pp. 463-476.

[293] B. O. Varga, F.
Mariasiu, D. Moldovanu, and C. Iclodean, "Loop Powertrain Simulation,"
in Electric and Plug-in Hybrid Vehicles: Advanced Simulation
Methodologies, ed, 2015, pp. 477-524.

[294] M.
Varga, M. A. Badiu, and V. Bota, "Link adaptation algorithm for
distributed coded transmissions in cooperative OFDMA systems,"
Telecommunication Systems, vol. 59, pp. 477-489, Aug 2015.

[295]
C. Vicas and S. Nedevschi, "Detecting Curvilinear Features Using
Structure Tensors," Ieee Transactions on Image Processing, vol. 24, pp.
3874-3887, Nov 2015.

[296] C. Vilau, D. Moldan,
N. Balc, and D. Leordean, "RESEARCHES ON THE BUCKLING TEST OF A TRIPOD
COMPONENTS USED IN EMERGENCIES," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 299-302, Jun 2015.

[297]
J. R. Villar, C. Chira, J. Sedano, S. Gonzalez, and J. M. Trejo, "A
hybrid intelligent recognition system for the early detection of
strokes," Integrated Computer-Aided Engineering, vol. 22, pp. 215-227,
2015.

[298] J. R. Villar, S. Gonzalez, J.
Sedano, C. Chira, and J. M. Trejo-Gabriel-Galan, "Improving Human
Activity Recognition and its Application in Early Stroke Diagnosis,"
International Journal of Neural Systems, vol. 25, Jun 2015.

[299]
O. I. Vulcu and M. Arghir, "EXPERIMENTAL STUDY OF PASSENGER VEHICLE
VIBRATIONAL BEHAVIOR IN ACCORDANCE WITH ITS MAINTENANCE," Acta Technica
Napocensis Series-Applied Mathematics Mechanics and Engineering, vol.
58, pp. 125-130, Mar 2015.

[300] O. I. Vulcu
and M. Arghir, "A PASSENGER VEHICLE MAINTENANCE STUDY USING EXPERIMENTAL
VIBRATION ANALYSIS," Acta Technica Napocensis Series-Applied
Mathematics Mechanics and Engineering, vol. 58, pp. 131-136, Mar 2015.

[301]
A. Zene, C. T. Chirap, O. Cret, and L. Vacariu, "Efficient Hardware
Implementation of Snapshotting Algorithms for NoC Applications,"
Romanian Journal of Information Science and Technology, vol. 18, pp.
79-92, 2015.

[302] A. Zuza, P. S. Agachi, V. M.
Cristea, A. Nair, N. N. Tue, and C. Horju-Deac, "CASE STUDY ON ENERGY
EFFICIENCY OF BIOGAS PRODUCTION IN INDUSTRIAL ANAEROBIC DIGESTERS AT
MUNICIPAL WASTEWATER TREATMENT PLANTS," Environmental Engineering and
Management Journal, vol. 14, pp. 357-360, Feb 2015.