# ISI Journals 2013

[1] U. Abel and M. Ivan, "Complete Asymptotic Expansions for Altomare Operators," Mediterranean Journal of Mathematics, vol. 10, pp. 17-29, Feb 2013.

[2] U. Abel, M. Ivan, and R. Paltanea, "Geometric series of Bernstein operators revisited," Journal of Mathematical Analysis and Applications, vol. 400, pp. 22-24, Apr 2013.

[3] C. Albu, D. Deconinck, L. Hotoiu, J. Deconinck, and V. Topa, "Steady-state analysis of the nickel oxide in neutral and weakly alkaline solutions," Electrochimica Acta, vol. 89, pp. 114-121, Feb 2013.

[4] H. C. Albu, L. Halonen, E. Tetri, F. Pop, and D. Beu, "Luminous and power quality analysis of office building light sources," Lighting Research & Technology, vol. 45, pp. 740-751, Dec 2013.

[5] A. M. Alutei, E. Szelitzky, and D. Mandru, "Transient Thermal State of an Active Braille Matrix with Incorporated Thermal Actuators by Means of Finite Element Method," Assistive Technology, vol. 25, pp. 51-57, 2013.

[6] A. Apatean, A. Rogozan, and A. Bensrhair, "Visible-infrared fusion schemes for road obstacle classification," Transportation Research Part C-Emerging Technologies, vol. 35, pp. 180-192, Oct 2013.

[7] M. A. Badiu, C. N. Manchon, and B. H. Fleury, "Message-Passing Receiver Architecture with Reduced-Complexity Channel Estimation," Ieee Communications Letters, vol. 17, pp. 1404-1407, Jul 2013.

[8] M. C. Balan, T. P. Todoran, S. D. Bolboaca, and L. Jantschi, "Assessments about soil temperature variation under censored data and importance for geothermal energy applications. Illustration with Romanian data," Journal of Renewable and Sustainable Energy, vol. 5, Jul 2013.

[9] D. Banabic, L. Lazarescu, L. Paraianu, I. Ciobanu, I. Nicodim, and D. S. Comsa, "Development of a new procedure for the experimental determination of the Forming Limit Curves," Cirp Annals-Manufacturing Technology, vol. 62, pp. 255-258, 2013.

[10] I. Barabas, "Predicting the temperature dependent density of biodiesel-diesel-bioethanol blends," Fuel, vol. 109, pp. 563-574, Jul 2013.

[11] P. Bechet, R. Mitran, and M. Munteanu, "A non-contact method based on multiple signal classification algorithm to reduce the measurement time for accurately heart rate detection," Review of Scientific Instruments, vol. 84, Aug 2013.

[12] B. Belean, M. Borda, A. Bot, and S. Nedevschi, "Low Complexity Approach for High Throughput Belief-Propagation based Decoding of LDPC Codes," Advances in Electrical and Computer Engineering, vol. 13, pp. 69-72, 2013.

[13] M. Belmeguenai, H. Tuzcuoglu, M. S. Gabor, T. Petrisor, C. Tiusan, D. Berling, et al., "Co2FeAl thin films grown on MgO substrates: Correlation between static, dynamic, and structural properties," Physical Review B, vol. 87, May 2013.

[14] G. Biron, A. Vadean, and L. Tudose, "Optimal design of interference fit assemblies subjected to fatigue loads," Structural and Multidisciplinary Optimization, vol. 47, pp. 441-451, Mar 2013.

[15] M. M. Birou, "Bernstein type operators with a better approximation for some functions," Applied Mathematics and Computation, vol. 219, pp. 9493-9499, May 2013.

[16] F. Bode, A. Meslem, and C. Croitoru, "Numerical simulation of a very low Reynolds cross-shaped jet," Mechanika, pp. 512-517, 2013.

[17] S. D. Bolboaca and L. Jantschi, "The Effect of Leverage and/or Influential on Structure-Activity Relationships," Combinatorial Chemistry & High Throughput Screening, vol. 16, pp. 288-297, Apr 2013.

[18] S. D. Bolboaca, L. Jantschi, and M. V. Diudea, "Molecular Design and QSARs/QSPRs with Molecular Descriptors Family," Current Computer-Aided Drug Design, vol. 9, pp. 195-205, Jun 2013.

[19] D. Borza, A. S. Darabant, and R. Danescu, "Eyeglasses Lens Contour Extraction from Facial Images Using an Efficient Shape Description," Sensors, vol. 13, pp. 13638-13658, Oct 2013.

[20] R. Both, A. M. Cormos, P. S. Agachi, and C. Festila, "Dynamic modeling and validation of 2-ethyl-hexenal hydrogenation process," Computers & Chemical Engineering, vol. 52, pp. 100-111, May 2013.

[21] D. C. Bratu, S. I. Pop, R. Balan, M. Dudescu, H. P. Petrescu, and G. Popa, "Effect of Different Artificial Saliva on the Mechanical Properties of Orthodontic Elastomers Ligatures," Materiale Plastice, vol. 50, pp. 49-52, Mar 2013.

[22] S. Breban, C. Saudemont, S. Vieillard, and B. Robyns, "Experimental design and genetic algorithm optimization of a fuzzy-logic supervisor for embedded electrical power systems," Mathematics and Computers in Simulation, vol. 91, pp. 91-107, May 2013.

[23] C. Brisan, R. V. Vasiu, and L. Munteanu, "A modular road auto-generating algorithm for developing the road models for driving simulators," Transportation Research Part C-Emerging Technologies, vol. 26, pp. 269-284, Jan 2013.

[24] G. Buda, M. Bilici, L. Dascalescu, and A. Samuila, "Influence of Material Moisture on the Tribocharging Process of Plastic Granules," Particulate Science and Technology, vol. 31, pp. 162-167, Mar 2013.

[25] G. Buda, M. Bilici, A. Samuila, and L. Dascalescu, "Experimental Study of the Tribocharging Process of Plastic Granular Materials on a Vibratory Feeder Device," Ieee Transactions on Dielectrics and Electrical Insulation, vol. 20, pp. 1489-1496, Oct 2013.

[26] G. Buda, A. Samuila, S. Atroune, M. Bilici, and L. Dascalescu, "Set point identification of a tribocharging process for mixed granular solids," Journal of Electrostatics, vol. 71, pp. 407-412, Jun 2013.

[27] A. F. Budai, G. Achimas, R. Neugebauer, and M. Prohl, "Method and Tool Design for Passive Sheet Metal Hydroforming on Conventional Single Action Presses," Journal of Manufacturing Science and Engineering-Transactions of the Asme, vol. 135, Apr 2013.

[28] A. Capata, "OPTIMALITY CONDITIONS FOR VECTOR EQUILIBRIUM PROBLEMS AND THEIR APPLICATIONS," Journal of Industrial and Management Optimization, vol. 9, pp. 659-669, Jul 2013.

[29] D. Cardenas-Morales, P. Garrancho, and I. Rasa, "Optimality of piecewise tau-linear interpolating operators," Applied Mathematics and Computation, vol. 219, pp. 6445-6448, Feb 2013.

[30] J. P. Cascales, L. Martin, A. Dulluard, M. Hehn, C. Tiusan, T. Szczepanski, et al., "Shot Noise in Epitaxial Double-Barrier Magnetic Tunnel Junctions," Ieee Transactions on Magnetics, vol. 49, pp. 4347-4350, Jul 2013.

[31] D. Catana, D. Pucko, and R. Krzykala-Schaefer, "How future managers view societal culture: A comparison across seven CEE countries," Journal for East European Management Studies, vol. 18, pp. 463-481, 2013.

[32] A. Ceclan, V. Topa, D. D. Micu, and A. Andreotti, "Lightning-Inverse Reconstruction by Remote Sensing and Numerical-Field Synthesis," Ieee Transactions on Magnetics, vol. 49, pp. 1657-1660, May 2013.

[33] V. A. Ceclan, P. Bere, M. Borzan, S. Grozav, and C. Borzan, "Development of Environmental Technology for Carbon Fibre Reinforced Materials Recycling," Materiale Plastice, vol. 50, pp. 79-83, Jun 2013.

[34] N. Cennamo, G. D'Agostino, R. Galatus, L. Bibbo, M. Pesavento, and L. Zeni, "Sensors based on surface plasmon resonance in a plastic optical fiber for the detection of trinitrotoluene," Sensors and Actuators B-Chemical, vol. 188, pp. 221-226, Nov 2013.

[35] N. Cennamo, D. Massarotti, R. Galatus, L. Conte, and L. Zeni, "Performance Comparison of Two Sensors Based on Surface Plasmon Resonance in a Plastic Optical Fiber," Sensors, vol. 13, pp. 721-735, Jan 2013.

[36] R. Chereches, P. Di Barba, V. Topa, M. Purcar, and S. Wiak, "Optimal shape design of electrostatic microactuators: A multiobjective formulation," International Journal of Applied Electromagnetics and Mechanics, vol. 43, pp. 65-76, 2013.

[37] V. R. Chifu, C. B. Pop, I. Salomie, D. S. Suia, A. Niculici, A. Negrean, et al., "Optimising the semantic web service composition process using bio-inspired methods," International Journal of Bio-Inspired Computation, vol. 5, pp. 226-238, 2013.

[38] C. G. Chiorean, "A computer method for nonlinear inelastic analysis of 3D composite steel-concrete frame structures," Engineering Structures, vol. 57, pp. 125-152, Dec 2013.

[39] V. Chiroiu, C. Brisan, M. Popescu, I. Girip, and L. Munteanu, "On the sonic composites without/with defects," Journal of Applied Physics, vol. 114, Oct 2013.

[40] N. Cioica, R. Fechete, C. Cota, E. M. Nagy, L. David, and O. Cozar, "NMR relaxation investigation of the native corn starch structure with plasticizers," Journal of Molecular Structure, vol. 1044, pp. 128-133, Jul 2013.

[41] T. Coconet and C. C. Todea, "The extended Brauer quotient of N-interior G-algebras," Journal of Algebra, vol. 396, pp. 10-17, Dec 2013.

[42] L. Cont, D. Grant, C. Scotchford, M. Todea, and C. Popa, "Composite PLA scaffolds reinforced with PDO fibers for tissue engineering," Journal of Biomaterials Applications, vol. 27, pp. 707-716, Feb 2013.

[43] C. Contan, B. S. Kirei, and M. D. Topa, "Modified NLMF adaptation of Volterra filters used for nonlinear acoustic echo cancellation," Signal Processing, vol. 93, pp. 1152-1161, May 2013.

[44] I. Costin and G. Toader, "Optimal evaluations of some Seiffert-type means by power means," Applied Mathematics and Computation, vol. 219, pp. 4745-4754, Jan 2013.

[45] A. Cotetiu, R. Cotetiu, and N. Ungureanu, "RESEARCH ABOUT AUTOMATIC ADJUSTMENT SOLUTION OF THE ADVANCE FORCE AT THE PERFFUSION DRILLS USING FLUID ELEMENTS," Archives of Mining Sciences, vol. 58, pp. 1201-1208, 2013.

[46] M. Cremene, L. Cremene, and D. Dumitrescu, "A Game Theoretical Perspective on Cooperation in Low Confidence Environments," Romanian Journal of Information Science and Technology, vol. 16, pp. 192-202, 2013.

[47] O. Cristea, P. Dolea, V. Turcu, and R. Danescu, "Long baseline stereoscopic imager for close to Earth objects range measurements," Acta Astronautica, vol. 90, pp. 41-48, Sep 2013.

[48] F. Damian, G. Damian, R. Lacatusu, C. Postolache, G. Iepure, M. Jelea, et al., "THE HEAVY METALS IMMOBILIZATION IN POLLUTED SOILS FROM ROMANIA BY THE NATURAL ZEOLITES USE," Carpathian Journal of Earth and Environmental Sciences, vol. 8, pp. 231-250, Nov 2013.

[49] M. F. Danca and N. Lung, "Parameter switching in a generalized Duffing system: Finding the stable attractors," Applied Mathematics and Computation, vol. 223, pp. 101-114, Oct 2013.

[50] M. Danciu, M. Gordan, C. Florea, R. Orghidan, E. Sorantin, and A. Vlaicu, "A Hybrid 3D Learning-and-Interaction-based Segmentation Approach Applied on CT Liver Volumes," Radioengineering, vol. 22, pp. 100-113, Apr 2013.

[51] L. Darabant, M. Cretu, and A. Darabant, "Magnetic Stimulation of the Spinal Cord: Experimental Results and Simulations," Ieee Transactions on Magnetics, vol. 49, pp. 1845-1848, May 2013.

[52] A. Dehelean, S. Rada, I. Kacso, and E. Culea, "IR, UV-vis spectroscopic and DSC investigations of europium doped tellurite glasses obtained by sol-gel synthesis," Journal of Physics and Chemistry of Solids, vol. 74, pp. 1235-1239, Sep 2013.

[53] A. Dehelean, S. Rada, A. Popa, and E. Culea, "Structural and magnetic investigations on gadolinium-tellurite vitreous systems prepared by sol-gel method," Journal of Molecular Structure, vol. 1036, pp. 203-208, Mar 2013.

[54] D. E. Demco, C. Filipoi, X. M. Zhu, R. Fechete, and M. Moller, "Morphological Heterogeneity by Diffusional Kurtosis NMR Spectroscopy in Perfluorosulfonic Acid/SiO2 Composite Proton-Exchange Membranes," Macromolecular Chemistry and Physics, vol. 214, pp. 1345-1355, Jun 2013.

[55] D. E. Demco, A. M. Oros-Peusquens, L. Utiu, R. Fechete, B. Blumich, and N. J. Shah, "Molecular dynamics parameter maps by H-1 Hahn echo and mixed-echo phase-encoding MRI," Journal of Magnetic Resonance, vol. 227, pp. 1-8, Feb 2013.

[56] O. Dolgikh, A. S. Demeter, A. C. Bastos, V. Topa, and J. Deconinck, "A practical way to model convection in non-agitated electrolytes," Electrochemistry Communications, vol. 37, pp. 20-23, Dec 2013.

[57] E. Dorolti, A. V. Trifu, O. Isnard, I. Chicinas, F. Tolea, M. Valeanu, et al., "Influence of mechanical milling on the physical properties of SmCo5/Fe65Co35 type hard/soft magnetic nanocomposite," Journal of Alloys and Compounds, vol. 560, pp. 189-194, May 2013.

[58] M. Drulea and S. Nedevschi, "Motion Estimation Using the Correlation Transform," Ieee Transactions on Image Processing, vol. 22, pp. 3260-3270, Aug 2013.

[59] C. Dudescu, A. Botean, and M. Hardau, "Thermal Expansion Coefficient Determination of Polymeric Materials using Digital Image Correlation," Materiale Plastice, vol. 50, pp. 55-59, Mar 2013.

[60] R. Duma, P. Dobra, M. Trusca, and I. V. Sita, "Digital Motor Control Library," in Advances in Intelligent Control Systems and Computer Science. vol. 187, I. Dumitrache, Ed., ed, 2013, pp. 367-378.

[61] R. Duma, M. Trusca, and P. Dobra, "EMBEDDED RAPID CONTROL PROTOTYPING: BLDC MOTOR CONTROL," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 14, pp. 144-151, Apr-Jun 2013.

[62] D. Dumitriu, L. Munteanu, C. Brisan, V. Chiroiu, R. V. Vasiu, O. Melinte, et al., "On the Continuum Modeling of the Tire/Road Dynamic Contact," Cmes-Computer Modeling in Engineering & Sciences, vol. 94, pp. 159-173, Aug 2013.

[63] C. A. Elisabeta, "Existence Theorems for Vector Equilibrium Problems via Quasi-Relative Interior," Scientific World Journal, 2013.

[64] S. Emerich, E. Lupu, and C. Rusu, "A new set of features for a bimodal system based on on-line signature and speech," Digital Signal Processing, vol. 23, pp. 928-940, May 2013.

[65] D. Felecan, "Mediated Naming: The Case of Unconventional Anthroponyms (UA)," Names-a Journal of Onomastics, vol. 61, pp. 219-229, Dec 2013.

[66] M. R. Filip, A. Pop, I. Perhaita, M. Moldovan, and R. Trusca, "Investigation of thermal and catalytic degradation of polystyrene waste into styrene monomer over natural volcanic tuff and Florisil catalysts," Central European Journal of Chemistry, vol. 11, pp. 725-735, May 2013.

[67] D. Fodorean, L. Idoumghar, and L. Szabo, "Motorization for an Electric Scooter by Using Permanent-Magnet Machines Optimized Based on a Hybrid Metaheuristic Algorithm," Ieee Transactions on Vehicular Technology, vol. 62, pp. 39-49, Jan 2013.

[68] S. Folea, M. Hulea, G. Mois, and V. Cosma, "WI-FI PORTABLE SOLUTION FOR DISTRIBUTED RADON MEASUREMENTS," Romanian Journal of Physics, vol. 58, pp. S126-S139, 2013.

[69] D. F. Fratila, "RESEARCH OF ENVIRONMENT-FRIENDLY TECHNIQUES INFLUENCE ON GEAR ACCURACY IN CONTEXT OF SUSTAINABLE MANUFACTURING," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 14, pp. 56-63, Jan-Mar 2013.

[70] O. Furdui, "A class of fractional part integrals and zeta function values," Integral Transforms and Special Functions, vol. 24, pp. 485-490, Jun 2013.

[71] G. Furtos, M. Tomoaia-Cotisel, C. Garbo, M. Senila, N. Jumate, I. Vida-Simiti, et al., "New Composite Bone Cement Based on Hydroxyapatite and Nanosilver," Particulate Science and Technology, vol. 31, pp. 392-398, Jul 2013.

[72] M. S. Gabor, T. Petrisor, C. Tiusan, and T. Petrisor, "Perpendicular magnetic anisotropy in Ta/Co2FeAl/MgO multilayers," Journal of Applied Physics, vol. 114, Aug 2013.

[73] M. S. Gabor, C. Tiusan, T. Petrisor, T. Petrisor, M. Hehn, Y. Lu, et al., "Structural defects analysis versus spin polarized tunneling in Co2FeAl/MgO/CoFe magnetic tunnel junctions with thick MgO barriers," Journal of Magnetism and Magnetic Materials, vol. 347, pp. 79-85, Dec 2013.

[74] I. Gavrea and M. Ivan, "Optimal rate of convergence for sequences of a prescribed form," Journal of Mathematical Analysis and Applications, vol. 402, pp. 35-43, Jun 2013.

[75] I. Gavrea and M. Ivan, "A solution to an open problem on the Euler-Mascheroni constant," Applied Mathematics and Computation, vol. 224, pp. 54-57, Nov 2013.

[76] I. Gavrea and G. Tachev, "On the multiplicativity of linear operators," Journal of Mathematical Analysis and Applications, vol. 408, pp. 203-208, Dec 2013.

[77] S. Gheorghita, R. Munteanu, and A. Graur, "An Effect of Noise in Printed Character Recognition System Using Neural Network," Advances in Electrical and Computer Engineering, vol. 13, pp. 65-68, 2013.

[78] S. Giovanzana, H. T. Kasprzak, B. Palucki, and S. Talu, "Non-rotational aspherical models of the human optical system," Journal of Modern Optics, vol. 60, pp. 1899-1905, Dec 2013.

[79] S. Giovanzana, R. A. Schachar, S. Talu, R. D. Kirby, E. Yan, and B. K. Pierscionek, "Evaluation of equations for describing the human crystalline lens," Journal of Modern Optics, vol. 60, pp. 406-413, Mar 2013.

[80] S. Giurgea, R. Tirnovan, D. Hissel, and R. Outbib, "An analysis of fluidic voltage statistical correlation for a diagnosis of PEM fuel cell flooding," International Journal of Hydrogen Energy, vol. 38, pp. 4689-4696, Apr 2013.

[81] I. Gligor, O. Soritau, M. Todea, C. Berce, A. Vulpoi, T. Marcu, et al., "Porous c.p. Titanium Using Dextrin as Space Holder for Endosseous Implants," Particulate Science and Technology, vol. 31, pp. 357-365, Jul 2013.

[82] H. Gonska and I. Rasa, "On infinite products of positive linear operators reproducing linear functions," Positivity, vol. 17, pp. 67-79, Mar 2013.

[83] H. Gonska, I. Rasa, and M. D. Rusu, "CEBYSEV-GRUSS-TYPE INEQUALITIES REVISITED," Mathematica Slovaca, vol. 63, pp. 1007-1024, Nov 2013.

[84] O. M. Gui, A. Falamas, L. Barbu-Tudoran, M. Aluas, B. Giambra, and S. C. Pinzaru, "Surface-enhanced Raman scattering (SERS) and complementary techniques applied for the investigation of an Italian cultural heritage canvas," Journal of Raman Spectroscopy, vol. 44, pp. 277-282, Feb 2013.

[85] C. Hebedean, C. Munteanu, A. Racasan, and C. Pacurar, "APPLICATION OF WINDINGS SHIFTING FOR THE OPTIMIZATION OF PLANAR STRUCTURES," Environmental Engineering and Management Journal, vol. 12, pp. 1153-1159, Jun 2013.

[86] A. G. Hosu-Prack, I. Petean, G. Arghir, L. D. Bobos, I. Iurcut, and M. Tomoaia Cotisel, "MARBLE NANO EROSION UNDER ACID RAIN EVIDENCED BY ATOMIC FORCE MICROSCOPY," Carpathian Journal of Earth and Environmental Sciences, vol. 8, pp. 75-82, Nov 2013.

[87] E. L. Hotoiu, S. Van Damme, C. Albu, D. Deconinck, A. Demeter, and J. Deconinck, "Simulation of nano-second pulsed phenomena in electrochemical micromachining processes - Effects of the signal and double layer properties," Electrochimica Acta, vol. 93, pp. 8-16, Mar 2013.

[88] V. Hrabovcova, P. Rafajdus, M. Liptak, and L. Szabo, "PERFORMANCE OF CONVERTERS SUITABLE FOR SWITCHED RELUCTANCE GENERATOR (SRG) OPERATION," Journal of Electrical Engineering-Elektrotechnicky Casopis, vol. 64, pp. 201-211, Jul-Aug 2013.

[89] C. A. Huniadi, O. L. Pop, T. A. Antal, and F. Stamatian, "The effects of ulipristal on Bax/Bcl-2, cytochrome C, Ki-67 and cyclooxygenase-2 expression in a rat model with surgically induced endometriosis," European Journal of Obstetrics & Gynecology and Reproductive Biology, vol. 169, pp. 360-365, Jul 2013.

[90] I. Ianos, D. Peptenatu, G. Damian, R. D. Pintilii, and G. S. Gheorghe, "A NEW HYPOTHESIS TO EXPLAIN THE UNIQUE SPATIAL DISTRIBUTION OF BALKAN ENDEMIC NEPHROPATHY," Carpathian Journal of Earth and Environmental Sciences, vol. 8, pp. 199-206, Feb 2013.

[91] F. Iliescu, S. Popescu, M. Dragomir, and D. Dragomir, "Public-private partnership in the water sector in Romania: success or failure?," Water Science and Technology-Water Supply, vol. 13, pp. 1249-1256, 2013.

[92] D. A. Ilutiu-Varvara and D. Radulescu, "ASSESSMENT OF AIR POLLUTION WITH SULPHUR DIOXIDE FROM ELECTRIC ARC FURNACES," Studia Universitatis Babes-Bolyai Chemia, vol. 58, pp. 143-150, 2013.

[93] D. Inoan and I. Rasa, "A recursive algorithm for Bernstein operators of second kind," Numerical Algorithms, vol. 64, pp. 699-706, Dec 2013.

[94] A. M. Iurian, I. Perhaita, R. Septelean, and A. Saponar, "WOOD FIBERS CHARACTERIZATION BY TGA ANALYSIS," Studia Universitatis Babes-Bolyai Chemia, vol. 58, pp. 141-149, 2013.

[95] A. M. Izzat, A. M. M. Al Bakri, H. Kamarudin, L. M. Moga, G. C. M. Ruzaidi, M. T. M. Faheem, et al., "Microstructural Analysis of Geopolymer and Ordinary Portland Cement Mortar Exposed to Sulfuric Acid," Materiale Plastice, vol. 50, pp. 171-174, Sep 2013.

[96] A. M. Izzat, A. M. M. Al Bakri, H. Kamarudin, A. V. Sandu, G. C. M. Ruzaidi, M. T. M. Faheem, et al., "Sulfuric Acid Attack on Ordinary Portland Cement and Geopolymer Material," Revista De Chimie, vol. 64, pp. 1011-1014, Sep 2013.

[97] L. Jakab-Farkas, D. Biro, G. Strnad, and I. Vida-Simiti, "Preparation and characterization of (Ti, Al, Si)N coatings developed by d.c. reactive magnetron sputtering," Journal of Optoelectronics and Advanced Materials, vol. 15, pp. 696-702, Jul-Aug 2013.

[98] L. Jantschi and S. D. Bolboaca, "Supervised Evolution: Research Concerning the Number of Evolutions that Occur Under Certain Constraints," Chemical Biology & Drug Design, vol. 82, pp. 603-611, Nov 2013.

[99] L. Jantschi, R. E. Sestras, and S. D. Bolboaca, "Modeling the Antioxidant Capacity of Red Wine from Different Production Years and Sources under Censoring," Computational and Mathematical Methods in Medicine, 2013.

[100] A. Kalitsov, P. J. Zermatten, F. Bonell, G. Gaudin, S. Andrieu, C. Tiusan, et al., "Bias dependence of tunneling magnetoresistance in magnetic tunnel junctions with asymmetric barriers," Journal of Physics-Condensed Matter, vol. 25, Dec 2013.

[101] M. H. Kovacs, D. Ristoiu, C. Voica, and T. Ristoiu, "OPTIMIZATION OF ORGANOMETALLIC COMPOUNDS EXTRACTION FROM AQUEOUS SAMPLES IN ORDER TO IMPROVE THEIR GAS CHROMATOGRAPHY-MASS SPECTROMETRY ANALYSIS PERFORMANCE," Romanian Journal of Physics, vol. 58, pp. 204-210, 2013.

[102] R. Lang, E. Szabo, G. A. Catana, Z. Konecna, and P. Skalova, "Beyond participation? - Leadership ideals of future managers from Central and East European Countries," Journal for East European Management Studies, vol. 18, pp. 482-511, 2013.

[103] R. Larde, J. M. Le Breton, A. Maitre, D. Ledue, O. Isnard, V. Pop, et al., "Atomic-Scale Investigation of SmCo5/alpha-Fe Nanocomposites: Influence of Fe/Co Interdiffusion on the Magnetic Properties," Journal of Physical Chemistry C, vol. 117, pp. 7801-7810, Apr 2013.

[104] S. Laszlo, "Multivalued variational inequalities and coincidence point results," Journal of Mathematical Analysis and Applications, vol. 404, pp. 105-114, Aug 2013.

[105] T. Lazar and G. Petrusel, "Fixed points for non-self operators in gauge spaces," Journal of Nonlinear Sciences and Applications, vol. 6, pp. 29-34, 2013.

[106] L. Lazarescu, "Effect of internal fluid pressure on quality of aluminum alloy tube in rotary draw bending," International Journal of Advanced Manufacturing Technology, vol. 64, pp. 85-91, Jan 2013.

[107] J. M. Le Breton, O. Isnard, J. Juraszek, V. Pop, and I. Chicinas, "A Mossbauer investigation of the formation of the Ni3Fe phase by high energy ball milling and subsequent annealing," Intermetallics, vol. 35, pp. 128-134, Apr 2013.

[108] Z. Lendek, J. Lauber, and T. M. Guerra, "Periodic Lyapunov functions for periodic TS systems," Systems & Control Letters, vol. 62, pp. 303-310, Apr 2013.

[109] Z. Lendek, A. Sala, P. Garcia, and R. Sanchis, "Experimental application of Takagi-Sugeno observers and controllers in a nonlinear electromechanical system," Control Engineering and Applied Informatics, vol. 15, pp. 3-14, Dec 2013.

[110] I. A. Letia and A. Groza, "Compliance checking of integrated business processes," Data & Knowledge Engineering, vol. 87, pp. 1-18, Sep 2013.

[111] I. Lupea, "UPDATING OF AN EXHAUST SYSTEM MODEL BY USING TEST DATA FROM EMA," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 14, pp. 326-334, Oct-Dec 2013.

[112] M. Manisor, C. Marcu, G. Tomoaia, and L. Miclea, "Comparison between Titan and Cobalt Hydroxyapatite-Coated Shoulder Prosthesis, during External and Internal Rotation," in Advances in Intelligent Control Systems and Computer Science. vol. 187, I. Dumitrache, Ed., ed, 2013, pp. 191-205.

[113] A. Maragiannis, D. Papageorgiou, C. Medrea, and I. Chicinas, "Microscopic examination of a tool used in tire waste recycling," Engineering Failure Analysis, vol. 35, pp. 247-252, Dec 2013.

[114] T. Marcu, A. M. Salantiu, I. Gligor, and C. Popa, "Microstructural characterization of PM Ti with dextrin addition for endosseous applications," Journal of Optoelectronics and Advanced Materials, vol. 15, pp. 847-852, Jul-Aug 2013.

[115] F. Mariasiu, "Numerical Investigation of the Effects of Biofuel Characteristics on the Injector Nozzle Erosion Process," Tribology Transactions, vol. 56, pp. 161-168, Mar 2013.

[116] F. Mariasiu, "Possibilities for reducing tractor engine friction losses at cold start using an ultrasonic irradiation technique," Turkish Journal of Agriculture and Forestry, vol. 37, pp. 623-631, 2013.

[117] T. F. Marinca, I. Chicinas, and O. Isnard, "Structural and magnetic properties of the copper ferrite obtained by reactive milling and heat treatment," Ceramics International, vol. 39, pp. 4179-4186, May 2013.

[118] T. F. Marinca, I. Chicinas, O. Isnard, and V. Popescu, "Nanocrystalline/Nanosized Ni1-gamma Fe2+gamma O4 Ferrite Obtained by Contamination with Fe During Milling of NiOFe2O3 Mixture. Structural and Magnetic Characterization," Journal of the American Ceramic Society, vol. 96, pp. 469-475, Feb 2013.

[119] T. F. Marinca, B. V. Neamtu, F. Popa, V. F. Tarta, P. Pascuta, A. F. Takacs, et al., "Synthesis and characterization of the NiFe2O4/Ni3Fe nanocomposite powder and compacts obtained by mechanical milling and spark plasma sintering," Applied Surface Science, vol. 285, pp. 2-9, Nov 2013.

[120] M. Marzband, A. Sumper, A. Ruiz-Alvarez, J. L. Dominguez-Garcia, and B. Tomoiaga, "Experimental evaluation of a real time energy management system for stand-alone microgrids in day-ahead markets," Applied Energy, vol. 106, pp. 365-376, Jun 2013.

[121] O. Matei, P. C. Pop, and H. Valean, "Optical character recognition in real environments using neural networks and k-nearest neighbor," Applied Intelligence, vol. 39, pp. 739-748, Dec 2013.

[122] C. Medrea, J. Sideris, I. Chicinas, and S. Ventouris, "Analysis of fracture and cracks of oldham's couplings used in anchor hoisting. Case study," Engineering Failure Analysis, vol. 35, pp. 590-596, Dec 2013.

[123] R. A. Mereu, A. Mesaros, T. Petrisor, M. Gabor, M. Popa, L. Ciontea, et al., "Synthesis, characterization and thermal decomposition study of zinc propionate as a precursor for ZnO nano-powders and thin films," Journal of Analytical and Applied Pyrolysis, vol. 104, pp. 653-659, Nov 2013.

[124] R. A. Mereu, A. Mesaros, M. Vasilescu, M. Popa, M. S. Gabor, L. Ciontea, et al., "Synthesis and characterization of undoped, Al and/or Ho doped ZnO thin Films," Ceramics International, vol. 39, pp. 5535-5543, Jul 2013.

[125] S. Miclaus, P. Bechet, and M. Gheorghevici, "Long-term exposure to mobile communication radiation: an analysis of time-variability of electric field level in GSM900 downlink channels," Radiation Protection Dosimetry, vol. 154, pp. 164-173, Apr 2013.

[126] D. Micu and G. De Mey, "THE CONDITION NUMBER FOR CIRCULANT NETWORKS," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 58, pp. 115-122, Apr-Jun 2013.

[127] D. Micu and G. De Mey, "GREEN'S FUNCTION OF POTENTIAL PROBLEMS IN LENS SHAPED GEOMETRIES," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 58, pp. 35-42, Jan-Mar 2013.

[128] D. D. Micu, G. C. Christoforidis, and L. Czumbil, "AC interference on pipelines due to double circuit power lines: A detailed study," Electric Power Systems Research, vol. 103, pp. 1-8, Oct 2013.

[129] D. D. Micu and D. Micu, "Electric field computation inside a rectangular petrol tank," Journal of Electrostatics, vol. 71, pp. 332-335, Jun 2013.

[130] A. I. Mihaltan, T. Frentiu, M. Ponta, D. Petreus, M. Frentiu, E. Darvasi, et al., "Arsenic and antimony determination in non- and biodegradable materials by hydride generation capacitively coupled plasma microtorch optical emission spectrometry," Talanta, vol. 109, pp. 84-90, May 2013.

[131] D. Mihon, V. Bacu, D. Rodila, T. Stefanut, K. Abbaspour, E. Rouholahnejad, et al., "Grid Based Hydrologic Model Calibration and Execution," in Advances in Intelligent Control Systems and Computer Science. vol. 187, I. Dumitrache, Ed., ed, 2013, pp. 279-293.

[132] A. Miron, M. D. Chindris, and A. C. Cziker, "Software Tool for Real-Time Power Quality Analysis," Advances in Electrical and Computer Engineering, vol. 13, pp. 125-132, 2013.

[133] A. I. Mitrea, "On the unbounded divergence in the best approximation on equidistant nodes," Applied Mathematics Letters, vol. 26, pp. 61-64, Jan 2013.

[134] D. Moldovanu and N. Burnete, "COMPUTATIONAL FLUID DYNAMICS SIMULATION OF A SINGLE CYLINDER RESEARCH ENGINE WORKING WITH BIODIESEL," Thermal Science, vol. 17, pp. 195-203, 2013.

[135] R. B. Mos, T. Petrisor, M. S. Gabor, A. Mancini, A. Rufoloni, G. Celentano, et al., "Epitaxial growth and characterization of La2Zr2O7 multilayers on biaxially textured NiW substrate by chemical solution deposition under highly reducing conditions," Thin Solid Films, vol. 531, pp. 491-498, Mar 2013.

[136] S. C. Mosneag, V. Popescu, A. Dinescu, and G. Borodi, "Utilization of granular activated carbon adsorber for nitrates removal from groundwater of the Cluj region," Journal of Environmental Science and Health Part a-Toxic/Hazardous Substances & Environmental Engineering, vol. 48, pp. 918-924, 2013.

[137] S. Muncaci and I. Ardelean, "Probing the Pore Size of Porous Ceramics with Controlled Amount of Magnetic Impurities via Diffusion Effects on the CPMG Technique," Applied Magnetic Resonance, vol. 44, pp. 837-848, Jul 2013.

[138] S. Muncaci and I. Ardelean, "The Influence of the Magnetic Impurity Content on the Pore Size Distribution Determination via the DDIF Technique," Applied Magnetic Resonance, vol. 44, pp. 365-373, Mar 2013.

[139] S. Muncaci, C. Mattea, S. Stapf, and I. Ardelean, "Frequency-dependent NMR relaxation of liquids confined inside porous media containing an increased amount of magnetic impurities," Magnetic Resonance in Chemistry, vol. 51, pp. 123-128, Feb 2013.

[140] C. Munteanu, E. Merdan, V. Topa, I. T. Pop, and S. Deleanu, "MITIGATION OF POWER FREQUENCY MAGNETIC FIELD NEARBY POWER LINES USING RECTANGULAR FRAMES," Environmental Engineering and Management Journal, vol. 12, pp. 1137-1143, Jun 2013.

[141] B. Muresan, S. Folea, I. Nascu, C. Ionescu, and R. De Keyser, "Identification and modeling of the three rotational movements of a miniature coaxial helicopter," Simulation-Transactions of the Society for Modeling and Simulation International, vol. 89, pp. 1490-1504, Dec 2013.

[142] C. Muresan and G. Achimas, "Means of Reducing Wear in Steel Pipe Connections with Interior Glass Coating," Revista De Chimie, vol. 64, pp. 1353-1358, Nov 2013.

[143] C. I. Muresan, S. Folea, G. Mois, and E. H. Dulf, "Development and implementation of an FPGA based fractional order controller for a DC motor," Mechatronics, vol. 23, pp. 798-804, Oct 2013.

[144] I. Muresan, B. S. Kirei, C. Contan, and M. D. Topa, "Rapid Prototyping of Sub-band Acoustic Echo Cancellers on FPGA Platforms," Advances in Electrical and Computer Engineering, vol. 13, pp. 45-50, 2013.

[145] V. Muresan, "Differential equations with modified argument, via weakly Picard operators' theory," Carpathian Journal of Mathematics, vol. 29, pp. 53-60, 2013.

[146] B. V. Neamtu, I. Chicinas, O. Isnard, I. Ciascai, H. Chiriac, and M. Lostun, "Magnetic properties of nanocrystalline Ni3Fe compacts prepared by spark plasma sintering," Intermetallics, vol. 35, pp. 98-103, Apr 2013.

[147] S. Nedevschi, V. Popescu, R. Danescu, T. Marita, and F. Oniga, "Accurate Ego-Vehicle Global Localization at Intersections Through Alignment of Visual Data With Digital Map," Ieee Transactions on Intelligent Transportation Systems, vol. 14, pp. 673-687, Jun 2013.

[148] O. Nemes, "Analytical Model Application for Adhesive Cylindrical Assemblies made by Hybrid Materials," Materiale Plastice, vol. 50, pp. 314-318, Dec 2013.

[149] S. C. Nicoara, D. E. Minnikin, O. C. Y. Lee, D. M. O'Sullivan, R. McNerney, C. T. Pillinger, et al., "Development and optimization of a gas chromatography/mass spectrometry method for the analysis of thermochemolytic degradation products of phthiocerol dimycocerosate waxes found in Mycobacterium tuberculosis," Rapid Communications in Mass Spectrometry, vol. 27, pp. 2374-2382, Nov 2013.

[150] C. Pacurar, V. Topa, C. Munteanu, A. Racasan, and C. Hebedean, "STUDIES OF INDUCTANCE VARIATION FOR SQUARE SPIRAL INDUCTORS USING CIBSOC SOFTWARE," Environmental Engineering and Management Journal, vol. 12, pp. 1161-1169, Jun 2013.

[151] R. Pacurar and P. Berce, "RESEARCH ON THE DURABILITY OF INJECTION MOLDING TOOLS MADE BY SELECTIVE LASER SINTERING TECHNOLOGY," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 14, pp. 234-241, Jul-Sep 2013.

[152] V. Pascalau, V. Popescu, G. L. Popescu, M. C. Dudescu, G. Borodi, A. M. Dinescu, et al., "Obtaining and Characterizing Alginate/k-Carrageenan Hydrogel Cross-Linked with Adipic Dihydrazide," Advances in Materials Science and Engineering, 2013.

[153] C. I. Pascu, O. Gingu, P. Rotaru, I. Vida-Simiti, A. Harabor, and N. Lupu, "Bulk titanium for structural and biomedical applications obtaining by spark plasma sintering (SPS) from titanium hydride powder," Journal of Thermal Analysis and Calorimetry, vol. 113, pp. 849-857, Aug 2013.

[154] I. R. Peter and D. Popa, "Stability of points in mean value theorems," Publicationes Mathematicae-Debrecen, vol. 83, pp. 375-384, Oct 2013.

[155] T. Peter, G. Plonka, and D. Rosca, "Representation of sparse Legendre expansions," Journal of Symbolic Computation, vol. 50, pp. 159-169, Mar 2013.

[156] D. Petreus, S. Daraban, I. Ciocan, T. Patarau, C. Morel, and M. Machmoum, "Low cost single stage micro-inverter with MPPT for grid connected applications," Solar Energy, vol. 92, pp. 241-255, Jun 2013.

[157] I. Piscoran Laurian, O. T. Pop, and B. Dan, "Bezier type surfaces," Applied Mathematics & Information Sciences, vol. 7, pp. 483-489, Mar 2013.

[158] D. Pisla, B. Gherman, C. Vaida, M. Suciu, and N. Plitea, "An active hybrid parallel robot for minimally invasive surgery," Robotics and Computer-Integrated Manufacturing, vol. 29, pp. 203-221, Aug 2013.

[159] D. Pisla, A. Szilaghyi, C. Vaida, and N. Plitea, "Kinematics and workspace modeling of a new hybrid robot used in minimally invasive surgery," Robotics and Computer-Integrated Manufacturing, vol. 29, pp. 463-474, Apr 2013.

[160] N. Plitea, D. Lese, D. Pisla, and C. Vaida, "Structural design and kinematics of a new parallel reconfigurable robot," Robotics and Computer-Integrated Manufacturing, vol. 29, pp. 219-235, Feb 2013.

[161] A. Pop, C. Badea, and I. Ardelean, "The Effects of Different Superplasticizers and Water-to-Cement Ratios on the Hydration of Gray Cement Using T-2-NMR," Applied Magnetic Resonance, vol. 44, pp. 1223-1234, Oct 2013.

[162] A. E. Pop, V. Popescu, A. Dinescu, and M. N. Batin, "The influence of the deposition time on morphological and optical properties of Cu (x) S films deposited on polypropylene substrate," Materials Science-Poland, vol. 31, pp. 318-324, Aug 2013.

[163] I. Pop, G. De Schutter, P. Desnerck, and T. Onet, "Bond between powder type self-compacting concrete and steel reinforcement," Construction and Building Materials, vol. 41, pp. 824-833, Apr 2013.

[164] S. I. Pop, M. Dudescu, D. C. Bratu, R. V. Pop, M. Petrisor, and M. Pacurar, "Influence of the Chemical Composition on the Mechanical Properties of Orthodontic Archwires," Revista De Chimie, vol. 64, pp. 771-775, Jul 2013.

[165] V. Pop, "Extensions of n-groups by m-groups," Carpathian Journal of Mathematics, vol. 29, pp. 69-76, 2013.

[166] V. Pop, S. Gutoiu, E. Dorolti, C. Leostean, O. Isnard, I. Chicinas, et al., "The influence of milling and annealing on the structural and magnetic behavior of Nd2Fe14B/alpha-Fe magnetic nanocomposite," Journal of Alloys and Compounds, vol. 581, pp. 821-827, Dec 2013.

[167] D. Popa and I. Rasa, "On the stability of some classical operators from approximation theory," Expositiones Mathematicae, vol. 31, pp. 205-214, 2013.

[168] D. C. Popa, V. L. Gliga, and L. Szabo, "THEORETICAL AND EXPERIMENTAL STUDY OF A MODULAR TUBULAR TRANSVERSE FLUX RELUCTANCE MACHINE," Progress in Electromagnetics Research-Pier, vol. 139, pp. 41-55, 2013.

[169] D. C. Popa, D. D. Micu, O. R. Miron, and L. Szabo, "Optimized Design of a Novel Modular Tubular Transverse Flux Reluctance Machine," Ieee Transactions on Magnetics, vol. 49, pp. 5533-5542, Nov 2013.

[170] F. Popa, O. Isnard, I. Chicinas, and V. Pop, "Thermal evolution of the Ni3Fe compound obtained by mechanical alloying as probed by differential scanning calorimetry," Journal of Alloys and Compounds, vol. 554, pp. 39-44, Mar 2013.

[171] M. Popa, R. A. Mereu, M. Filip, M. Gabor, T. Petrisor, L. Ciontea, et al., "Highly c-axis oriented ZnO thin film using 1-propanol as solvent in sol-gel synthesis," Materials Letters, vol. 92, pp. 267-270, Feb 2013.

[172] M. Popa, A. Mesaros, R. A. Mereu, R. Suciu, B. S. Vasile, M. S. Gabor, et al., "Optical properties correlated with morphology and structure of TEAH modified ZnO nanoparticles via precipitation method," Journal of Alloys and Compounds, vol. 574, pp. 255-259, Oct 2013.

[173] D. I. Popescu, I. F. Moholea, and R. M. Morariu-Gligor, "Urban Noise Annoyance Between 2001 and 2013-Study in a Romanian City," Archives of Acoustics, vol. 38, pp. 205-210, 2013.

[174] S. Popescu, M. Dragan, M. Dragomir, and D. Pitic, "FROM ORGANISATIONAL BUSINESS PERFORMANCE TO AN ENVIRONMENTAL EXCELLENCE FRAMEWORK," Journal of Environmental Protection and Ecology, vol. 14, pp. 1711-1718, 2013.

[175] V. Popescu, D. Raducanu, A. Dinescu, M. Danila, and G. L. Popescu, "INFLUENCE OF UTLTRASOUNDS ON STRUCTURAL AND MORPHOLOGICAL PROPERTIES OF PbS DEPOSITED ON GLASS SUBSTRATE," Chalcogenide Letters, vol. 10, pp. 159-165, May 2013.

[176] A. Popovici, G. E. Popita, C. Roba, T. Rusu, V. Tofana, and C. Rosu, "A PROPOSAL FOR CATHODE RAY TUBES WASTE RECYCLING," Journal of Environmental Protection and Ecology, vol. 14, pp. 1703-1710, 2013.

[177] A. Popovici, T. Rusu, V. Tofana, V. Dan, G. E. Popita, R. Hategan, et al., "STUDY ON RECYCLING FEASIBILITY OF ACTIVATED GLASS FROM WEEE EQUIPMENT TREATMENT," Environmental Engineering and Management Journal, vol. 12, pp. 359-364, Feb 2013.

[178] C. V. Prodan, V. Micle, G. C. Rogozan, and M. Prodan, "MATHEMATICAL MODELING OF THERMAL DESORPTION USING LINEAR REGRESSION ANALYSIS," Environmental Engineering and Management Journal, vol. 12, pp. 365-369, Feb 2013.

[179] M. Purcar, C. Munteanu, and V. Topa, "3D ELECTRODE SHAPE CHANGE SIMULATION IN ELECTROPLATING," Revue Roumaine Des Sciences Techniques-Serie Electrotechnique Et Energetique, vol. 58, pp. 252-262, Jul-Sep 2013.

[180] E. Puschita, T. Palade, R. Colda, I. Vermesan, and A. Moldovan, "Radio Resource Adaptive Adjustment in Future Wireless Systems Based on Application Demands," International Journal of Computers Communications & Control, vol. 8, pp. 111-126, Feb 2013.

[181] M. Pustan, O. Belcin, and C. Birleanu, "Mechanical seals with oscillating stator," Meccanica, vol. 48, pp. 1191-1200, Jul 2013.

[182] M. Pustan, C. Birleanu, and C. Dudescu, "Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading," Microsystem Technologies-Micro-and Nanosystems-Information Storage and Processing Systems, vol. 19, pp. 915-922, Jun 2013.

[183] M. Pustan, C. Dudescu, C. Birleanu, and Z. Rymuza, "Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers," International Journal of Materials Research, vol. 104, pp. 408-414, Apr 2013.

[184] M. Rada, L. Bolundut, M. Pica, M. Zagrai, S. Rada, and E. Culea, "Mixed ionic-electronic conduction and electrochemical behavior of the lead and molybdenum ions in the lead-molybdate-germanate glasses," Journal of Non-Crystalline Solids, vol. 365, pp. 105-111, Apr 2013.

[185] M. Rada, R. Chelcea, S. Rada, L. Rus, N. Dura, T. Ristoiu, et al., "Effect of aluminum oxide codoping on copper-lead-germanate glasses," Spectrochimica Acta Part a-Molecular and Biomolecular Spectroscopy, vol. 102, pp. 414-418, Feb 2013.

[186] S. Rada, R. Chelcea, M. Rada, A. Bot, N. Aldea, V. Rednic, et al., "Electrochemical characterization and structure of tungsten-lead-germanate glasses and glass ceramics," Electrochimica Acta, vol. 109, pp. 82-88, Oct 2013.

[187] S. Rada, E. Culea, R. Chelcea, M. Rada, A. Bot, N. Aldea, et al., "Physical properties and electrochemical performance of molybdenum-lead-germanate glasses and glass ceramics," Ceramics International, vol. 39, pp. 1403-1411, Mar 2013.

[188] S. Rada, M. Rada, and E. Culea, "Structure and molecular modeling of tungsten borotellurate glasses," Journal of Alloys and Compounds, vol. 552, pp. 10-13, Mar 2013.

[189] S. Rada, M. Rada, and E. Culea, "Structural, energetic and electronic properties of intercalated boron-nitride nanotubes," Bulletin of Materials Science, vol. 36, pp. 189-191, Apr 2013.

[190] I. Railean, P. Lenca, S. Moga, and M. Borda, "Closeness Preference - A new interestingness measure for sequential rules mining," Knowledge-Based Systems, vol. 44, pp. 48-56, May 2013.

[191] I. Rasa, "Asymptotic relations for the Bernstein-Schnabl operators on the unit interval," Carpathian Journal of Mathematics, vol. 29, pp. 85-89, 2013.

[192] E. Riegler, G. E. Kirkelund, C. N. Manchon, M. A. Badiu, and B. H. Fleury, "Merging Belief Propagation and the Mean Field Approximation: A Free Energy Approach," Ieee Transactions on Information Theory, vol. 59, pp. 588-602, Jan 2013.

[193] E. N. Riti-Mihoc, E. Riti-Mihoc, and D. Porcar, "RESEARCH ON MICROWAVE CALCINATION OF SEWAGE SLUDGE," Metalurgia International, vol. 18, pp. 139-142, 2013.

[194] R. Robotin, G. Lazea, and P. Dobra, "Mobile Robot Navigation Using Graph Search Techniques over an Approximate Cell Decomposition of the Free Space," in Advances in Intelligent Control Systems and Computer Science. vol. 187, I. Dumitrache, Ed., ed, 2013, pp. 129-142.

[195] D. Rosca and M. De Graef, "Area-preserving projections from hexagonal and triangular domains to the sphere and applications to electron back-scatter diffraction pattern simulations," Modelling and Simulation in Materials Science and Engineering, vol. 21, Jul 2013.

[196] H. Rotaru, G. Armencea, D. Spirchez, C. Berce, T. Marcu, D. Leordean, et al., "In vivo behavior of surface modified Ti6Al7Nb alloys used in selective laser melting for custom-made implants. A preliminary study," Romanian Journal of Morphology and Embryology, vol. 54, pp. 791-796, 2013.

[197] M. Ruba, I. A. Viorel, and L. Szabo, "Modular stator switched reluctance motor for fault tolerant drive systems," Iet Electric Power Applications, vol. 7, pp. 159-169, Mar 2013.

[198] M. D. Rus, "Optimization methods for l(1)-energy minimization in the estimation of optical flow," Carpathian Journal of Mathematics, vol. 29, pp. 109-117, 2013.

[199] V. Saracut, M. Giloan, M. Gabor, S. Astilean, and C. Farcau, "Polarization-Sensitive Linear Plasmonic Nanostructures via Colloidal Lithography with Uniaxial Colloidal Arrays," Acs Applied Materials & Interfaces, vol. 5, pp. 1362-1369, Feb 2013.

[200] M. B. V. Soporan, V. F. Soporan, G. Batrinescu, and E. Cocis, "EXPLORATORY ANALYSIS OF GAS EMISSIONS FROM NON-COMPLIANT MUNICIPAL LANDFILL USED FOR ENERGETIC EVALUATION," Environmental Engineering and Management Journal, vol. 12, pp. 381-386, Feb 2013.

[201] M. B. V. Soporan, V. F. Soporan, G. Batrinescu, and E. Cocis, "ASSESSMENT METHODOLOGY FOR NON-COMPLIANT LANDFILLS," Environmental Engineering and Management Journal, vol. 12, pp. 387-391, Feb 2013.

[202] P. Stano, Z. Lendek, J. Braaksma, R. Babuska, C. de Keizer, and A. J. den Dekker, "Parametric Bayesian Filters for Nonlinear Stochastic Dynamical Systems: A Survey," Ieee Transactions on Cybernetics, vol. 43, pp. 1607-1624, Dec 2013.

[203] P. M. Stano, Z. Lendek, and R. Babuska, "Saturated Particle Filter: Almost sure convergence and improved resampling," Automatica, vol. 49, pp. 147-159, Jan 2013.

[204] T. Szelitzky and E. H. Dulf, "Adaptive control in series load PWM induction heating inverters," International Journal of Electronics, vol. 100, pp. 1714-1723, Dec 2013.

[205] T. Szelitzky and E. H. Dulf, "H infinity Control of an Induction Heating Inverter," in Advances in Intelligent Control Systems and Computer Science. vol. 187, I. Dumitrache, Ed., ed, 2013, pp. 235-250.

[206] S. Talu, "Multifractal Geometry in Analysis and Processing of Digital Retinal Photographs for Early Diagnosis of Human Diabetic Macular Edema," Current Eye Research, vol. 38, pp. 781-792, Jul 2013.

[207] S. Talu, "Characterization of Surface Roughness of Unworn Hydrogel Contact Lenses at a Nanometric Scale Using Methods of Modern Metrology," Polymer Engineering and Science, vol. 53, pp. 2141-2150, Oct 2013.

[208] V. F. Tarta, T. F. Marinca, I. Chicinas, F. Popa, B. V. Neamtu, P. Pascuta, et al., "Stability of Phases in Ball-Milled Zinc Ferrite/Iron Composite Produced by Spark Plasma Sintering," Materials and Manufacturing Processes, vol. 28, pp. 933-938, Aug 2013.

[209] M. O. Tatar, C. Cirebea, and D. Mandru, "Structures of the Omnidirectional Robots with Swedish Wheels," in Mechatronic Systems and Materials Iv. vol. 198, Z. Gosiewski and Z. Kulesza, Eds., ed, 2013, pp. 132-137.

[210] B. Tebrean, R. Silaghi-Dumitrescu, and T. E. Crisan, "MODELLING OF THE COPLANAR CAPACITORS FOR DERMAL OR TRANSDERMAL DRUG DELIVERY SYSTEM MONITORING," Proceedings of the Romanian Academy Series a-Mathematics Physics Technical Sciences Information Science, vol. 14, pp. 134-143, Apr-Jun 2013.

[211] G. Thalmaier, C. Codrean, N. Sechel, and I. Vida-Simiti, "CRYSTALLIZATION KINETICS OF AMORPHOUS V47Ni32Ti21 ALLOY," Metalurgia International, vol. 18, pp. 23-26, 2013.

[212] G. Thalmaier, I. Vida-Simiti, H. Vermesan, C. Codrean, and M. Chira, "Amorphous Ni36Zr35Ti29 alloy as bipolar plates for polymer electrolyte membrane fuel cells," Optoelectronics and Advanced Materials-Rapid Communications, vol. 7, pp. 573-576, Jul-Aug 2013.

[213] F. Toadere, "Simulating the functionality of a digital camera pipeline," Optical Engineering, vol. 52, Oct 2013.

[214] D. A. Todea, S. Tonk, A. E. Tiuc, A. Torok, C. Manzatu, G. Katona, et al., "EFFICIENT DEGRADATION OF PHENOL WITH PSEUDOMONAS PUTIDA CELLS FOR THE PRODUCTION OF PURE WATER," Studia Universitatis Babes-Bolyai Chemia, vol. 58, pp. 125-133, Sep 2013.

[215] D. A. Todea, S. Tonk, A. E. Tiuc, A. Torok, C. Manzatu, G. Katona, et al., "CONTINUOUS FLOW WASTE WATER PURIFICATION WITH IMMOBILIZED CELLS," Studia Universitatis Babes-Bolyai Chemia, vol. 58, pp. 135-141, Sep 2013.

[216] M. Todea, E. Vanea, S. Bran, P. Berce, and S. Simon, "XPS analysis of aluminosilicate microspheres bioactivity tested in vitro," Applied Surface Science, vol. 270, pp. 777-783, Apr 2013.

[217] D. Toloman, A. Mesaros, A. Popa, O. Raita, T. D. Silipas, B. S. Vasile, et al., "Evidence by EPR of ferromagnetic phase in Mn-doped ZnO nanoparticles annealed at different temperatures," Journal of Alloys and Compounds, vol. 551, pp. 502-507, Feb 2013.

[218] B. Tomoiaga, M. Chindris, A. Sumper, A. Sudria-Andreu, and R. Villafafila-Robles, "Pareto Optimal Reconfiguration of Power Distribution Systems Using a Genetic Algorithm Based on NSGA-II," Energies, vol. 6, pp. 1439-1455, Mar 2013.

[219] B. Tomoiaga, M. Chindris, A. Sumper, R. Villafafila-Robles, and A. Sudria-Andreu, "Distribution system reconfiguration using genetic algorithm based on connected graphs," Electric Power Systems Research, vol. 104, pp. 216-225, Nov 2013.

[220] A. V. Trifu, E. Dorolti, A. F. Takacs, I. Chicinas, O. Isnard, and V. Pop, "Magnetic and structural properties of Fe65Co35 alloys obtained by melting, high-energy milling and heat treatment," Materials Science and Engineering B-Advanced Functional Solid-State Materials, vol. 178, pp. 1352-1355, Nov 2013.

[221] S. C. Vac, G. E. Popita, N. Frunzeti, and A. Popovic, "Evaluation of Greenhouse Gas Emission from Animal Manure Using the Closed Chamber Method for Gas Fluxes," Notulae Botanicae Horti Agrobotanici Cluj-Napoca, vol. 41, pp. 576-581, Jul-Dec 2013.

[222] S. C. Vac, G. E. Popita, N. Frunzeti, A. Popovici, E. Merce, and T. Gabor, "BIOGAS PLANTS - A SUSTAINABLE CHOICE," Journal of Environmental Protection and Ecology, vol. 14, pp. 1769-1776, 2013.

[223] C. Vaida, N. Plitea, D. Pisla, and B. Gherman, "Orientation module for surgical instruments-a systematical approach," Meccanica, vol. 48, pp. 145-158, Jan 2013.

[224] B. O. Varga, "Electric vehicles, primary energy sources and CO2 emissions: Romanian case study," Energy, vol. 49, pp. 61-70, Jan 2013.

[225] R. Varga and S. Nedevschi, "Label Transfer by Measuring Compactness," Ieee Transactions on Image Processing, vol. 22, pp. 4711-4723, Dec 2013.

[226] A. R. Zsigmond, T. Frentiu, M. Ponta, M. Frentiu, and D. Petreus, "Simple and robust method for lithium traces determination in drinking water by atomic emission using low-power capacitively coupled plasma microtorch and microspectrometer," Food Chemistry, vol. 141, pp. 3621-3626, Dec 2013.